129,240 used machines on RESALE, but how to find them? Machine Search
VINCA TO300-INOX stainless steel mobile lifting and tipping device for drums, barrels etc., maximum lift 160kg, maximum lift height 1636 mm. Year 2011 (2 available)
Barrel filling line complete (new Waagevon Bizerba, control panel and filler neck Bedieteil Bizerba iS30 Scales Bizerba type 2000/4000 VE-L 2250 piece barrel bag (new) with 3500 piece barrel bag sealers (new) NETZSCH with dosing unit BJ. 1983 with 80 piece barrels with lids and 80m EW pallets
Barrel cleaner, make Scheuer, for inside cleaning of barrels with bavarian tap, with detergent tub, pump, control cabinet
Barrel tipper, paint bucket tipping device, can tipping device -Auxiliary device: for the transfer of varnishes, paints ... -Recording diameter: 335 mm -Dimensions: 500/360/H1100 mm -Weight: 10 kg
GRP barrel, storage container, storage container, silo system, tank, fertilizer storage silo -Material: GRP -Storage silo: 750 liters -on: stand -Mannhole -Dimensions: 1650/920/H900 mm -Weight: 130 kg
Barrel stub, axle stub, axle -Max. Weight: 750 kg -Rezess: Ø 49 mm -Number: 14x available -Price: per piece -Weight: 6.5 kg/piece
New in box, plastic lid damaged Auction-ID: A1-44832-692
New in box, plastic lid damaged Auction-ID: A1-44832-693
New in box, plastic lid damaged Auction-ID: A1-44832-555
New in box, plastic lid damaged Auction-ID: A1-44832-554
Tank barrel Jödden 450 litres Complete unit with 12 V electric motor, battery terminals, nozzle Length 1.20 m Width 0.80 m Height 0.96 m Weight 270 kg Forklift tabs
KEG Bottling Line Manufacturer Tonsen / China Semiautomatic Type St 1F Max. 40 KEG/h at 30L Depending on the operator and the degree of dirt Year of construction 2023 Further enquiries and price on request
Grease Environmentally friendly, quickly biodegradable lubricating greases based on calcium soap and rapeseed oil. Manufacturer: Fuchs Item No.: 600654726 Plantogel 2 N 180 kg NEW - orig. packaging
Collagen Barrel Lift Manufacturer Servolift Find more here - / Contact us at -
Stock number: PM1553, Excentric screw barrel pump, stainless steel,, Flux, 1,1 kW motor, 900 rpm., 220/380 Volt., Bar Ø 50 x L 1000 mm., Material: Stainless steel AISI 304
Stock number: P311, Barrel pump, stainless steel,, Lutz type Niro 40., Ex motor 220 volt,, 460 watt, 9100 rpm., Straw Ø 40 x L 900 mm.
Stock number: P285, Barrel pump, stainless steel,, 18800 rpm. 220/380 V., Straw Ø 33 mm. x L 3025 mm., Material: Stainless steel AISI 304
200 litre, Stock number: T3739, Litre: 200, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 2 pcs., Item: Barrel, Top: Open with lid, Inner diameter: Ø 560 mm., Total height: 870 mm., Other: Strengthening ring and fastening band in the top
150 litre, Stock number: T3357, Litre: 150, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 8 pcs., Item: Barrel, Top: Open with lid, Inner diameter: Ø 550 mm., Outer diameter: D 590 mm., Total height: 650 mm., Other: Strenthening ring in the top
150 litre, Stock number: T3962, Litre: 150, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 94 pcs., Item: Barrel, Top: Open with lid, Inner diameter: Ø 550 mm., Outer diameter: D 590 mm., Total height: 650 mm., Other: Strengthening ring in the top and lid with fastening band
200 litre, Stock number: T1690, Litre: 200, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Barrel, Standing: On strengthening ring, Top: Open with lid, clamping fixture and strengthening ring, Inner diameter: Ø 560 mm., Total height: 825 mm.
Hilger & Kern P80 Pump Basic version P80 Barrel size 80l Gear ratio (drive) 56:1 Flow rate (with 20 double lifts) l/min 0.61 Material Viscosity (ball valve pump/scoop piston pump) 2.5 million Working pressure (max.) bar 20-250 (315) Air consumption at 20 double strokes l/min 220 Dimensions base plate (A x W) mm 610 x 500 Height retracted mm 1400 Height extended mm 2200 Weight without container kg 65 / 72 Maximum container height mm 750 Maximum container size 80 Maximum container Ø outside mm 440 A single pump is included Complete plant closure, large selection of mezzanines, pallet racks, shelving racks, paternosters. High Quality Industrial Machinery, Lathes, Grinding Machines, Hand Machinery Suppliers in China More items - new and used - can be found in our shop! International shipping costs on request!
Drum mixer for e.g. plastic granules or other Capacity 50kg (2 bags) granules + masterbatches Including approx. 18 usable barrels, 2 of which are made of metal
Max. load: 350kg, no known defects, without accessories, spare parts, or documentation, year of manufacture: approx. 2015. An on-site inspection is possible.
A 2-station party keg filler small keg filler Esau & Hüber is available. Filling capacity: 300/h, keg size: 5l, filling positions: 2. An on-site inspection is possible.
DME Small Keg Washer - Second Hand CAPACITY: Fills up to 20 or cleans up to 14 kegs per hour (2 station) Fills up to 40 or cleans up to 28 kegs per hour (4 station) SPECIFICATIONS: Individual on / off valves allow filling of one to two or to four kegs (depending on head capacity) at the same time 3600 RPM s/s pump mounted on cart CO2 manifold with valved inlet / outlet and pressure gauge All stainless steel manifolds Portable stainless steel cart with locking casters Motor starter, on/off switch, 20 ft (5m) cord Keg cleaning support racks at 3'6" (1.070m) Counter pressure manifold with bleed off 1 ½” tri clamp connector for kegging tank outlet to filler hose This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
Keg Washer/Filler - Second Hand 2 head keg washer filler complete with beer carbonator manufactured by NT Teknik Type NM Keg 1-1 This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
Single head semi automated cask filling machine, that incorporates isinglass finings dosing. Manufacture : Microdat Model: CF55 Year of Manufacture: 2013 Single phase For more information and more available stock please visit us at - advancedbrewing.co.uk
2 Head Automated Cask Washer - Second Hand 2 heads cleaning, stainless steel cask washer, with rotating spray balls. Heated detergent tank Air Actuated Valves Single Phase 240 Volts Manufactured by ABUK - 10/07/2004 Serial Number: AB06 For more information and more available stock please visit us at - advancedbrewing.co.uk
used
KEG wash and fill, 7-10 KEG/h, manual, new
used
KEG wash and fill, 20-30 KEG/h, automatic, new
Boiler / Barrel Transport Trolley NEW( 2 pieces )Stainless steelInner dimensions = Q : 40 cm , H.: 10 cm on 5 castors , one of them with brake5 edges = 6.5 cm HighNewDetails see pictureÂ
Barrel lifter, barrel handling, barrel gripper, barrel lifter, barrel handling, barrel gripper -Drum lifter with: gripper head -Load capacity: kg -Suitable for: 1 x 200-L steel bung drums, steel lid drums, rolling hoop drums -Reception: 410 mm -Automatic opening when: setting down the barrels -Number: 2x grippers available -Price: per piece -Dimensions: 340/305/H900 mm -Weight: 47 kg
Manual barrel filling machine for the filling of bunghole barrels with lateral bunghole, horizontal filling of barrels., Width: 0,9 m, Height: 2,9 m, Weight: 200 kg, Formats: bunghole barrels with lateral bunghole, barrels filled horizontally, Material: stainless steel
Washing tunnel for cleaning the outside of kegs. Cleaning is carried out with water heated to 60 °C. A steam or hot water-heated bath is located in the lower part of the external washer for this purpose. Equipped with adjustable spray nozzles and a brush station. To prevent excessive water carry-over, the flap doors at the inlet and outlet close under their own weight. With device for discharging of washed-off labels., Additional title: Keg spraying and keg brushing, Max. capacity: 300 Kegs/h, Capacity keg filling plant: 110 Kegs/h, Voltage: 220/380 V, Frequency: 50 Hz, Length: ca. 2200 mm, Width: ca. 1500 mm, Formats: 30-litre and 50-litre kegs, EU format, with PU jacket, Features: Spray jets, high-pressure pump, brush station, label discharge
KEG Filling Plant, Additional title: Semi-automatic keg filling system, Performance approx.: 50 KEG/h, Power: 2,5 kW, Voltage: 230 V, Frequency: 50 - 60 Hz, Heating / Cooling: steam 1.5 - 2 bar, < 125°C, Water: 2 - 3 bar, 80°C, Compressed air: 5 - 6 bar, Length: 860 mm, Width: 760 mm, Height: 2530 mm, Weight: 130 kg, Formats: Combi fitting Ø 75 mm, World KEG fitting, Operation / Control: Control cabinet, Siemens 1200, Touch panel, Material: stainless steel, Position: free standing , Features: 1 filling station with elevating protective housing, Gravity roller conveyors in the inlet and outlet, control cabinet with control unit, switch panel for CIP or product inlet
Load capacity 300 kg, collection volume 65 l Auction-ID: A1-45239-2158
Please note: all drums have different sizes and conditions Different sizes Auction-ID: A1-40104-129
used
Iddon Cold Feed Extruder. 2.5" screw dia. 10/1 LD Ratio. Motor Size 20.4/5.5 HP
Food Extruders single and twin screws for various applications : breakfast cereals, corn flake, pet food, full fat soya, snacks We overhaul many models and have in our stocks machines like Clextral BC 45/82, wenger 175 ... also walter single screw. Milin Gentieg cereals Britany, France processing equipments has been specialising for years. We organise deliveries to any destinations for single machines or complete lines from cleaning to flaking and extrusion
Key data: 63 mm, 1300
Twin screw extruder, conical Manufacturer: Reifenhäuser Type: BT 1000-2-63 K Year of Make: 1994 Machine No.: 32061 Working hours: 32,303 h Screw geometry: conical for PVC-hard profiles Screw diameter: 63 – 121 mm Screw length: 1300 mm Screw speed: max. approx. 32 1/min. Nominal torque of the gearbox: 1000 daNm Dynamic load rating of the return pressure bearing: 103600 daN Engine power: 43.0 kW, Drive motor: Baumüller DC motor Cylinder heating/cooling zones: 4/3 (air cooling with fan) Adapter heating zones: 1 Tool Heating Zones: 5 Temperature control: digital temperature controller (2 x PSG Multipact 88) Max. permissible mass pressure: 500 bar Output capacity: approx. 150 - 200 kg/h for PVC-hard profiles Accessories: Dosing device and material hopper Extrusion height: 1150 mm Dimensions: 4250 x 1200 x 1750 mm without hopper (LxWxH) Weight: approx. 3000 kg Cond ...
maximum number of results exceeded
please refine your search
70 € 
