extruder screw barrel used for sale

Iddon HRX 4.5? (120mm) Cold Feed Rubber Extruder Year 1994 LD ratio 17:1 Bostock & Bramley Gearbox ABB Motor: 1994, 95kW, 1870 rpm, 419 amps, 360 volts With 1 x spare vacuum screw With Control Panel

Semi - Automatic Butter Extruder and Shaping Machine fited on full stainless steel frame, Control panel. Two Stainless steel screw augers, stainless steel hopper. Manufacture : Dairy Machinery UK Model : DMUK EXSH1 Usage : Butter Extruding and Shaping Machine Shapes : Various Shapes and Sizes Condition : New Warranty : 12 months Spare Parts : Dairy Machinery UK

Cat No. 13.0412 in a very good condition operating pressure: max.3 bar year of construction: 1996 connection on top: 2 and ¾ with plastic cap without pressure fitting measurement and weight: HxD: 670x400 mm - weight: 13,5 kg The price is for one unit. All prices are valid Ex-Works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from D-97753 Karlstadt-Karlburg Subject to prior sale

KUHNE EXTRUDER KF70E & CO. EXTRUDER K45-24D Power: 800-1000 kg/h Max. film width 700-800 mm Equipment / Additional information: The machine is constructed as follows: -Colotronic dosing unit CSK30 with 4 components -Kuhne smooth and cooling rolls (calendering) / GA4/900; puller: BA2-1/900 -Foil nozzle // Max. film width 700-800 mm Fully existing infrastructure; control cabinets, pumps, etc. Material PS and PP were processed

new and origin packed set of screw and barrel for Reifenhauser extruder, model RT5801-1-150-30, screw diameter 150 mm - 30 l/d

Excentric screw barrel pump,stainless steel,Flux 1,1 kW motor.

BTS-Drum Press for Metal drums / Plastic drums The BTS-Drum Crusher is ideal for compacting 30 to 200 Lt. barrels but also plastic drums. The Drum Press impresses by its ease of use and throughput quality. By compacting drums users receive a volume reduction up to 90%, the compacted material is much easier to handle and saves enormous logistic and storage costs. The compacted drums can be fed back properly into the recycling cycle. - Compaction up to 90% - Enormous cost reduction of drum disposal - 30 Lt oil collection tray with tap connection - Compaction head with spikes for piercing the drums for escape of air during the pressing process - Maximum safety standards by totally enclosed chamber - Useable for 30 to 200 Lt. steel drums and plastic drums - CE-certified - Quality product Made in Europe Pressing force: 24 Ton Motor: 11 kW 32 Amp Power supply: 380-400 V (3 Ph ...

Cat.-Nr. 09-1025 new Standard Features: • Strong Frame Construction • Possible to use as Basis and Intermediate Storage • Movable with Low Lifting Elevating Truck Measurements and Weight: Total Height: 390 mm Width: 760 mm Length: 1250 mm Weight: 27 kg The price is for one barrel. For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Drum pump, hygienic ExzenterschneckenpumpeVon of the company GrünpumpenTechnische DatenTyp ds.: LDS 80.1Ser. No.: 0259 Qm³ / h 2,40N1 / min: möglichVerpackung 6,75ZahlungsmodalitätenBarzahlung pick up and transfer in advance and shipping pick up, shipping via forwarding and abroad by prior arrangement all data were listed to the best of our knowledge and belief.Errors are reserved. This auction is aimed only at professionals, dealers, and other legal persons.

Stock no.: 7038 Manufacturer:Engel Diameter: 15 mm for 80V aggregate used for vertical unit

Water tanks and extinguishing water tanks USED & REFURBISHED Muensterlandtanks.de Extinguishing water tank, extinguishing water tank, storage tank, cistern, AHL, ASL, diesel tank, heating oil tank, water tank, service water, extinguishing tank, buffer, buffer tank, extinguishing water tank, water tank Container and tank trade Call us: 0162 1341979 A used steel tank in the size of 16,000 litres is offered. Volume: 16,000 Ltr. Material: steel tank tank, material S235JRG2 Tank shape: cylindrical, horizontal, double-walled Diameter 1.60m, L approx. 8.40 m Exits: Dom on the top Finishes at the top Tank according to DIN 6608 Tanks can be run over and withstand earth pressure - plastic tanks are squeezed over time! Condition: Tank cleaned from the inside and provided with a new bitumen coating from the outside. Suitable for above-ground and underground storage of wat ...

Barrel press RMH 200 Electric motor: 5.5 KW, 400 V, 50 Hz Pressure: 25 T Press cycle: 58 seconds W x D x H: 1200 x 1000 x 2800 mm

Barrel filling line complete (new Waagevon Bizerba, control panel and filler neck Bedieteil Bizerba iS30 Scales Bizerba type 2000/4000 VE-L 2250 piece barrel bag (new) with 3500 piece barrel bag sealers (new) NETZSCH with dosing unit BJ. 1983 with 80 piece barrels with lids and 80m EW pallets

VINCA TO300-INOX stainless steel mobile lifting and tipping device for drums, barrels etc., maximum lift 160kg, maximum lift height 1636 mm. Year 2011 (2 available)

Barrel cleaner, make Scheuer, for inside cleaning of barrels with bavarian tap, with detergent tub, pump, control cabinet

Barrel pump,stainless steel,Lutz Niro 40,460 watt motor

Barrel pump,stainless steel,Stewart,air driven.

Barrel pump,stainless steel,straw Ø 33 mm. x L 3025 mm.

Load: 300kg, compressed air supply: 5bar, weight: 470kg.

Format: 200l barrels, machine was not used.

Load: 300kg, weight: 104kg, including documentation.

With Electric Motor Lutz MA II 3-230, power: 430-460W.

Sell a used barrel heater incl VA tank and fittings. Dimensions Durcjmesser about 80cm 160cm high Heating is divisible and can be removed. The heater is mounted on swivel castors. Power 2000 Watt Container stands on 3 feet and has an emptying opening in the lower area Condition used. Used for oil

A Krones glass bottle filling line Equipped with a bottle vacuum system Performance today. 14,000 bottles of wine per hour Type filler: K 323-152, year of construction 2000 Bloc formation mechanically with a Krones Rinser machine Variojet Type K 562-235 with motorized higher adjustable filler upper part and with manual locking for VK- VKS- VC- VVHL and VVHK filling system 7 different wine bottles were bottled (Sample see photo) with manual cullet and filler exterior spraying, manually controlled. with disinfectant spraying device for vacuum fillers with 2 nozzles including control with set of sterile air filters with steam sterilization unit Rinser Medium 1: Water, temperature 50 to 55 °C with collecting tank with circulation pump, equipped with Container Level Control and Temperature Monitoring Medium 2: with saturated steam heating Medium 3: Sterile air with 2 ...

Tank barrel Jödden 450 litres Complete unit with 12 V electric motor, battery terminals, nozzle Length 1.20 m Width 0.80 m Height 0.96 m Weight 270 kg Forklift tabs

Barrel stub, axle stub, axle -Max. Weight: 750 kg -Rezess: Ø 49 mm -Number: 14x available -Price: per piece -Weight: 6.5 kg/piece

Barrel pliers, round profile pliers TAKRAF ZFH 025 ( ZFH025 ) 250 kg Gripping width: 370 / 630 mm used, tested ! Dimensions: 1000 x 780 x 520 mm Weight: 34 kg

Barrel pump, lever pump VAKA - WERKE lever drive pmax: 1 kp / cm² Flow rate: 200 cm3 per double stroke immersion tube 880 mm Dimensions: 1300 x 220 x 150 mm

For sale is this hand truck for the transport of barrels. Condition from the pictures. --------------------- For sale is this hand truck for transporting barrels. Condition can be taken from the pictures.

inkl. Hülse für die CIP  More then 300 machines new and second hand on our seema .de

1 cleaning head 1 filling head

- Manufacturer: GARBELLOTTO - Residual drain, ball valve NW 40 - Clear drain - Manhole in stainless steel - Tester - Stainless steel dome NW 200 - in very good condition

GRP barrel, storage container, storage container, silo system, tank, fertilizer storage silo -Material: GRP -Storage silo: 750 liters -on: stand -Mannhole -Dimensions: 1650/920/H900 mm -Weight: 130 kg

Barrel tipper, paint bucket tipping device, can tipping device -Auxiliary device: for the transfer of varnishes, paints ... -Recording diameter: 335 mm -Dimensions: 500/360/H1100 mm -Weight: 10 kg

Drum lifter with roller conveyor

KEG Bottling Line Manufacturer: M&F / Germany Semiautomatic Type Micromatic N2/2 b Max. 30 KEG/h at 30L Depending on the operator and the degree of dirt Year of construction 2020 Further information and price on request

Keg washer and filler, manual, new

Keg washer and filler, semi-automatic, new

KEG Bottling Line Manufacturer Tonsen / China Semiautomatic Type St 1F Max. 40 KEG/h at 30L Depending on the operator and the degree of dirt Year of construction 2023 Further enquiries and price on request

CIP plant consisting of 3 rectangular tanks without insulation placed side by side. The caustic tank can be heated directly using steam. volume per tank: 15 hl with CIP supply pump (Hilge) exit connections: DN 65 return connections: DN 50 water connection: 1.5 inch, Capacity: 45 hl 3 tanks with 15 hl each, Material: stainless steel 1.4301, Position: auf Füßen stehend, Features: sample taps, supply pump

Barrel with large amount of aluminium Y-shaped smoke sticks, length sticks: 900 mm.

Barrel with large amount of aluminium Y-shaped smoke sticks, length sticks: 900 mm.

Jwell 92/188 Conical Twin Screw Extruder - Granular Line Machine has been used 1 year It is in excellent condition Capacity : 700 kg / hour It will be given with the granule front line.

General SKU354T966 LocationBarneveld MakeClextral TypeBC45 Mach.No.876 Main Features Motor21 KW Inlet diameter105 mm L/D28 Specified Features - Double screw extruder Double screw extrudercheck Number of hours1223 Screw diameter55 mm L/D28 Counter rotatingcheck Number of heating zones:5 Electric heatingcheck 7kW each Water coolingcheck DC-motor21 kW, 430 Volt Screw speed50-300rpm Feeding with hoppercheck Exchangeable segmentscheck MaterialMild steel Information Year of construction1990 With switchgearcheck(as is) Sizes switchgear3,3x0,62x2,26 m Total height2,3 m CEcheck Floorspace4,25x1,25 m Weight2300kg Extra Specificationsmachine comes with additional parts. the screw consists of segments specifications p34 cutter: 2.2kW, 380/420 volts, 2280rpm Double screw extrudersClextralExtruders > Double screw extrudersBrand > Clextral What you can expect from Foeth ...

General SKU231U203 LocationBarneveld MakeLeistritz TypeSZE-50 GL Mach.No.94.91.2168/7 Main Features Motor52 KW Inlet diameter49.7 mm L/D42 Specified Features - Double screw extruder Double screw extrudercheck Number of hours31783 Screw diameter49,7 mm L/D42 Co-rotatingcheck Number of heating zones:9 Electric heating33 kW Water coolingtype: ZIK - (Zylinder Intensiv Kühlung, eng. Barrel intensive cooling) DC-motor46 kW, 460 Volt AC-motorside dosing screw of the extruder: 1,5 kW 230-400 Volt Screw speedmax. 400 rpm MaterialNitriding Steel 1.8550 Information Year of construction1994 Sizes switchgearcheck(as is) Total height1,9 m CEcheck Floorspace4,26x0,80 m Weight2000 Extra Specificationspower cabinet dimention: 2,26x0,62x2,2 mDouble screw extrudersLeistritzExtruders > Double screw extrudersBrand > Leistritz What you can expect from Foeth: -- Machine is in wo ...

General SKU231U195 LocationBarneveld MakeWerner & Pfleiderer TypeZSK 50 MCC Mach.No.64012350 Sizes Screw diameter40 mm Main Features Motor181 KW Inlet diameter165 mm L/D54 Specified Features - Double screw extruder Double screw extrudercheck Number of hours34432 Screw diameter40 mm L/D54 Co-rotatingcheck Number of heating zones:10 Electric heatingcheck Water coolingcheck DC-motor0,79-181 kW 470 Volt Screw speed4-920-1056 rpm Feeding with hoppercheck (165x130 mm) Feeding with metering screwcheck (Werner&Pfileiderer, type: ZS-B 58, motor: 5-6 kW, 400 Volt, max. 400 rpm) Exchangeable segmentscheck Number of temperature controllers:10 Capacity200-400 kg/h MaterialFerritic stainless steel 1.4113, Mild steel, Nitriding Steel 1.8550 Information Year of construction2000 With switchgearcheck Total height0,73 m CEcheck Floorspace2,1x0,2 m Weight± 7340 kg Extra ...

General SKU354T968 LocationBarneveld MakeWerner & PFleiderer TypeContinua 37/27 D Mach.No.220331 Sizes Screw diameter37 mm Main Features Motor7.6 KW L/D27 Specified Features - Double screw extruder Double screw extrudercheck Number of hours284222 Screw diameter37 mm L/D27 Co-rotatingcheck Number of heating zones:5: 1 cooling: 4 heating Steam heatingcheck DC-motor7,6 kW 440 Volt With variable speed drivecheck Screw speed0-400 rpm Exchangeable segmentscheck Number of temperature controllers:5 MaterialMild steel Information Year of construction1985 With switchgearcheck (as is) Total height2,3 m Floorspace3,2x1,3 m Weight1700 kg Extra Specificationswith extra screwsDouble screw extrudersWerner & PfleidererExtruders > Double screw extrudersBrand > Werner & Pfleiderer What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compar ...

General SKU411T126 LocationBarneveld MakeClextral Framatome TypeEV 32 Mach.No.B 101 Main Features Motor52 KW Inlet diameter80 mm L/D36 Specified Features - Double screw extruder MaterialStainless steel 1.4306 (304L) Double screw extrudercheck Number of hours146.30 Screw diameter32 mm L/D36 Counter rotatingcheck Number of heating zones:8 Steam heatingcheck AC-motor45/52kW, 380-420/440-480/660 Volt, 1480/1780 rpm Feeding with metering screwcheck clextral C0 Number of temperature controllers:8 Information Year of construction2000 With switchgearcheck(as is) Total height3.26 CEcheck Floorspace4,3x1,42 m Weight3460 kg Extra Specificationsmachine comes with k-tron Feeder specifications: Type LWF D5/ Type K2-ML-T35/DR Dia: 400mm feeder inlet Outlet: 110mm Double screw extrudersClextralExtruders > Double screw extrudersBrand > Clextral What you can expect from Foeth ...

General SKU292M349 LocationBarneveld MakeBerstorff TypeZE-25 Mach.No.EO 0324/88 Main Features Motor6 KW Inlet diameter25 mm L/D20 Specified Features - Double screw extruder Double screw extruder(1x) Screw diameterdia. 25x500mm L/D20 Number of heating zones:3 Electric heatingcheck Water coolingcheck DC-motor6 KW, 200 Volt Screw speed0-450 Rpm Feeding with hoppercheck Feeding with metering screwcheck Information Year of construction1989 With switchgear( as is ) Sizes switchgear0,8x1,0x2,0 M Floorspace1,8x0,8 M Total height1,1 M Weight450 KG Extra Specifications incl. tempereer eenheid 3,5 KW, 380 Volt. THERE ARE NO SCREWS WITH THIS MACHINE !Double screw extrudersBerstorffExtruders > Double screw extrudersBrand > Berstorff What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destina ...

General SKU300P748 LocationBarneveld MakeAPV Baker Industrial Extruder Division Ltd (UK) Mach.No.WEF960037 724/1 Main Features Motor3 KW Inlet diameter50 mm L/D20 Specified Features - Double screw extruder Double screw extrudercheck Number of hours567 Screw diameter50mm L/D20 Co-rotatingcheck Number of heating zones:1 Steam heatingcheck Water coolingcheck AC-motor3,0 KW, 230/400 Volt With variable speed drivecheck Number of temperature controllers:1 Used onicecream MaterialStainless steel Information Year of construction1996 With switchgearcheck Floorspace2,6x1,2 M CEcheck Total height1,6 M Weight1100 KG Technical specs Extra informationscrews form stainless steelDouble screw extrudersAPV ProductsExtruders > Double screw extrudersBrand > APV Products What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- ...