extruder screw barrel used for sale

Operating conditions of this machine: unchecked. This item is delivered loaded on a truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-171

Screw compressor Kaeser SK 19 Manufacturer: Kaeser Type SK 19 Machine number 1017 Built in 1999 max. pressure 10 bar Power consumption 11 kW Delivery volume 1,590 l/min Operating hours 40,914 B/h Test run carried out lxwxh 84x78x101 cm Weight 270 kg Loading costs 50.00 Euro Auction-ID: 04J-7Y0-1

Screw compressor Alup Allegro 11 Year of manufacture 2022 3,400 B/h speed-controlled Manufacturer: Alup Alup is part of Atlas Copco Machine number ITJ 698213 Type Allegro 11 Year of construction 2022 max. pressure 13 bar Power consumption 11 kW Delivery rate 1,860 l/min at 7 bar Total hours 3,400 B/h Machine utilization: 1-20 1% 20-40 70% 40-60 17% 60-80 10% 80-100 2% Test run carried out lxwxh 118x68x95 cm Weight 259 kg Loading costs 50.00 Euro Auction-ID: 04J-7XX-1

Main extruder : KME 1-90-36R, main drive 255 kW Co Extruder Inner Layer : KME 45-30 Co Extruder Outer Layer: KME 45-36BR, New Screw Condition : good, straight from production. Compact design, 1 common control cabinet Note : 3-layer pipe head up to 315 mm available

Main extruder : KME 1-90-36R, main drive 255 kW Co Extruder Inner Layer : KME 45-30 Co Extruder Outer Layer: KME 45-36BR, New Screw Condition : good, straight from production. Compact design, 1 common control cabinet Note : 3-layer pipe head up to 315 mm available

Screw ø 75-36D; approx. 600 kg/h A.C. Engine 182.0 kW

Shelf not included, separate lot. Auction-ID: A7-45181-26

Screw Air Compressor 7.5kW. Current:10HP /7.5kW/ 10A ( Soft Start). Flow Rate:1.1 m3/min (38CFM). Pressure: 8Bar. Power supply: 380v 50hz 3phase. Single Stage. Motor Protection: IP54. Air Out Let Port Size: G1/2. Lubricant Oil: 5Liter Machine condition: unchecked. Approx. Transport dimension: LxWxH 750 x 980 x 1010 mm; Approx. Weight: 206kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-43157-7

Screw Air Compressor 15kW. Current：20HP /15kW( Y-Delta Start). Flow Rate:2.2 m3/min (77CFM). Pressure: 8Bar. Power supply: 380v 50hz 3phase. Single Stage. Motor Protection: IP54. Air Out Let Port Size：G3/4. Lubricant Oil: 10Liter Machine condition: unchecked. Approx. Transport dimension: LxWxH 830 x 1300 x 1200 mm; Approx. Weight: 339kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-43157-95

Unaudited Auction-ID: A7-45427-216

Screw Air Compressor 11kW. Current：15HP /11kW ( Y-Delta Start). Flow Rate:1.6 m3/min (56CFM) Pressure: 8Bar. Power supply: 380v 50hz 3phase. Single Stage. Motor Protection: IP54. Air Out Let Port Size：G3/4. Lubricant Oil: 10Liter. Machine condition: unchecked. Approx. Transport dimension: LxWxH 830 x 1300 x 1200 mm; Approx. Weight: 320kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-43157-43

Unaudited Auction-ID: A7-45427-190

Oil-free screw compressor Atlas Copco ZR75FF Dryer integrated 75 kW 8.35 bar 11 m3/min Year of Make: 2004 Hours: 44,153

Kaeser DSDX243SFC screw compressor 132 kW with 8.5 bar and 26.90 m3/min. Inverter integrated. New stage installed at around 45,000 hours

Spice jars with screw lids, 45 pieces New and used + 5 pieces E3 containers, WITHOUT PALLET ! Auction-ID: A7-45675-6

8 telescopic pull-outs, 1 swing door, Digital Thermometer RS pro RS 41 Auction-ID: A1-45526-19

GEA Refrigeration Germany GmbH screw cooling compressor, type: Grasso MR-M2655S-28, serial number: M1949, year of construction: 2014, geometric volume: 3912 CM³/rot, flow rate: 845 m³/h, allowable pressure: 28 bar, max speed: 4500 rpm, refrigerant: NH3 R717, empty weight: 3090 kg, with WEG motor, power: 160 kW, dimensions cooling compressor: 3300 mm x 1300 mm x 2300 mm, dimensions switch cabinet: 2400 mm x 600 mm x 2200 mm.

Nimo KG s/s bunker with outfeed screw, type: SKRUVTRANSP., number: 9482, year of construction: 2000, maximum load capacity: 1650 kg, tier: 225 mm, total dimensions: 3350 mm x 1400 mm x 2200 mm.

Kaeser DSD202SFC screw compressor 110 kW 10 bar 20.30 m3/min Inverter integrated. Stage 1x exchanged New oil filter and oil.

Equipped with DryEnergy refrigeration dryer and standing 1000L pressure vessel of 220 x 90 cm. Auction-ID: A1-41992-114

Volume flow: 18.16 mc/min Operating pressure: 13 bar Suction pressure: 1 bar Speed: 2200 rpm Approximate dimensions: 2500 x 1400 x 2200 mm Warning: the information reported has been taken on board the machine using measuring instruments and may not correspond to the actual performance. For further information, on-site inspection is suggested. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-45448-711

This semi-automatic capping machine with lowering head closes aluminum screw caps (pilferproof and other types of caps) with or without pouring spout and twist-off caps (for pots). The machine can also be configured for special applications. The operator places the bottle on the plate, with the cap manually on the neck. By pressing the two buttons on the sides of the machine, the closing head lowers and closes the capsules within seconds. With the help of the right components, the lowering head capping machine can close the following caps: - Stestelvin type - BVS type - MCA type (three-phase version) - pilferproof type The machine is equipped with the special \"No Cap No Roll\" 4-roller head, made entirely of stainless steel. Easy to use Insert the bottle with the capsule to be closed and press the two-hand control to insert the cap in seconds. TECHNICAL FEATURES Descending He ...

Equipped with: emergency stop, lcd display, main switch. Auction-ID: A1-41992-108

Operating pressure: 7.5 bar Size: approx. 2400 × 1250 × 1450 mm Warning: the information reported has been taken on board the machine and may not correspond to the actual performance. For further information, on-site inspection is suggested. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-45448-739

3 x AEG cordless screwdriver, 4 times AEG charging station, 9 batteries Auction-ID: A7-45768-78

Control: Sigma Control 2 Including: Cyclone cutter KAESER f26 KC with electronically level-controlled steam trap ECO-DRAIN 31 G1 Oil-water separator Kaeser AQUAMAT CF6 Adsorption dryer Kaeser DC 18E 95 Dimensions 750x750x1950 mm WxLxH Weight 220Kg Activated carbon filter F22KA G3/4 Pressure vessel 11 bar Standing volume: 1000L Including:Valve set and condensate emptying ECO-DRAIN 31 Overflow valve 44-6B G3/4 PN16 4-10 bar Auction-ID: A1-45762-116

Technical data Manufacturer: Grötzinger Type: SPP 30/90 Year of Make: 1973 Machine number: 10481173/4715 Printing capacity: 30 t Working stroke: 250 mm Cutting surface: 750/1 mm² Working length: 450 mm Work table width: 390 mm Weight: approx. 770 kg Configuration Machine type: Press Nameplate information: Manufacturer: Grötzinger, Pforzheim Execution: Industrial press with 30 t pressure capacity and 250 mm stroke Auction-ID: A1-45711-116

For sale is a high-quality lead and pull spindle lathe from the renowned German manufacturer Weiler, model Condor VS 1. The machine convinces with its high precision, robust construction and durability and is in a very well-maintained and technically perfect condition. Ideally suited for the workshop, single part production and precise turning work. General information: Machine Type: Lead and Pull Spindle Lathe Manufacturer: Weiler Model: Condor VS 1 Year of construction: approx. 1977 Condition: Well maintained, technically perfect Availability: Immediately available Technical data: Max. turning diameter over bed: approx. Ø 330 mm Max. turning diameter via support: approx. Ø 170 mm Max. turning length: approx. 800 mm Bar passage: approx. Ø 38 mm Spindle: Speed range: approx. 24 – 2,800 rpm Feed & Thread: Feed range: approx. 0.037 – 1.253 mm/rev  ...

Set of 10 boxes of 200 screws diameter 4 mm length 30 mm Auction-ID: A1-45282-191

Set of 6 boxes of 200 tx 25 screws diameter 5 mm length 50 mm Auction-ID: A1-45282-192

Set of 60 door knobs, various and varied screws included Auction-ID: A1-45282-187

Set of 60 door knobs, various and varied screws included Auction-ID: A1-45282-169

Pallet of 600 boxes of 200 screws two new models r Auction-ID: A1-45282-211

nominal force:315 t stroke:300 mm no. of strokes:36 /min distance between columns:540 mm distance table/ram, max. stroke up, adjustment up:750 mm table surface area:530 x 630 mm blow die to die:630 t Allowed max. force:500 t ram surface:450 x 560 mm spindle diameter:180 mm power capacity:18,0 kW weight:13,0 t Dimensions (WxDxH):2,5 x 2,0 x 4,0 m

pressure:400 t stroke:280 mm no. of strokes:56 Hub/min distance table/ram, max. stroke up, adjustment up:680 mm table surface area:560 x 750 mm allowed max. force:600 t blow die to die:800 t spindle diameter:200 mm ram surface:560 x 560 mm height over floor:4,1 m power requirement:37,0 kW weight:12,0 t dimensions (WxDxH):2,2 x 2,0 x 4,25 m

Wet spent grain conveyor - Housing with rectangular inlet chute - Wet spent grain bunker mounted at the inlet - Flushing water discharge connection - Mounted gear motor - Non-return flap with air connection, pressure gauge and ball access hatch., Additional title: Wet spent grain conveyor, Capacity approx.: 200 kg/min, Power: 4 kW, Current: 6,98 A, Voltage: 400 V, Frequency: 50 Hz, Material: Stainless steel 1.4301, Features: Spent grain bunker; non-return valve with compressed air connection, manometer and ball access hatch

Overview The Solo Screw Capper was manufactured in 2004 by the German engineering company Dr. Datz. The machine can process aluminum screw caps. It was used in a bottling line of a mineral water company. The line mainly used for contract bottling and was now stopped, to be sold in parts. Technical Specifications: Number of closing elements: 8 Capacity: up to 20.000 bph Cap type: 28mm aluminum screw cap Working direction from left to right Format: 0,7l GDB bottle

Continuously serviced, excellent condition. Atlas Copco ZR160 VSD screw compressor With speed-controlled drive, adsorption dryer MD400 Compressor: Manufacturer: Atlas Copco Type: ZR 160 VSD Max. operating pressure: 8.6 bar Variable speed drive Cooling water consumption 2.1 liters/s Air supply: 27 m3/min Water cooled Oil free Power: 163 kW Year of construction: 2002 Uptime: 122499 Last service: September 20, 2023 Refrigerator: Manufacturer: Atlas Copco Type: MD 400 W Year of construction: 2002 Max. operating pressure: 10.5 bar Empty volume: 199 l