129,235 used machines on RESALE, but how to find them? Machine Search
Key data: 50
Extruder 2 spindles: 50 mm Ø 12 L/D, motor: 4.5 kw, without electrical panel.
Key data: 50
Extruder 2 corrotating spindles: 50 mm Ø, 40 L/D, brand: ICMA SAN Giorgio, with double degasser. Motor: 57.5 Kw direct current with drive. Material dispenser and thread head (spaghetti), with electrical panel.
Extruder 2 spindles 18L/D, model: BK-50-93, tapered spindles, brand: Volcano, with motor: 25hp, with variable speed drive. Degasser and dispenser of material and electrical panel.
Key data: 120
Extruder 1 spindle : 120 mm Ø 35 L/D, make: Union, motor: 110 Kw (150 hp). 4.2 m. long. With degasser, filter changer: 220 mm, overhead cutting to the water with centrifuge and screen. Electrical panel with variable speed drive.
Key data: 60
Extruder 1 spindle: 60 mm Ø 32 L/D, Amut brand, variable speed motor Elektra Faurndau: 7 to 24 KW, with electrical panel and wire head for pellets: 23 holes and electrical panel.
Key data: 90
Extruder 1 spindle Brand: Eurotecno, 90 mm Ø, 33 L/D. Electrical panel, filter changer: 160 mm, wire head for graining, stainless bathtub: 3 m, without motor. Eurotecno noodle model G-400 with blades: 300 mm.
Key data: 120
Extruder 1 spindle: 120 mm Ø, 35L/D, brand: Union, with degasser, hydraulic filter changer: 150. Year: 1987.
Key data: 65
Extruder 2 corrotating spindles: 65 mm Ø, 30L/D, brand: Maris, model: TM-65 V. Shirt and spindle compatible by segments. Degasser, motor: 90 KW DC, with variable speed. Thread head and 2 spare spindles.
Key data: 60
Extruder 1 spindle: 60 mm Ø, 25 L/D, brand: Safinio, motor: 20 hp, variable speed drive, brand: Omron, model: F7, alternating current: 30 kw and electrical panel.
Center height: 315 mm Center width: 1000 mm Circulating Ø: 630 mm Spindle bore: 74 mm Spindle holder: Size 8 Pick-up cone tailstock: 5 MK Spindle speeds: 7 - 710 rpm Feeds: longitudinal/flat 0.063-4/0.030-2 mm/rev Thread pitches: 1 - 14 mm electrical connection: 380 V kW Space requirement: 2750 x 1250 x 1380 mm Weight: approx. 4200 kg
Main technical data: Center height: 560 mm Distance between centers: 5000 mm Bar passage: 105 mm The lathe is in good condition, being cleaned and visible at Ns. site.
Stock No. 2680 1x partially overhauled and functionally tested Compounding extruder double screw, co-rotating intermeshing Segmented screws and cylinder barrel (water cooled) Screws 2x 64 mm - 40 L/D Screw speed up to 1200 rpm-1 Drive 482 kW-DC Gearbox Flender safety coupling atutomatik 3x degassing venting ports ( vacuum pump optional for extra charge ) 2x side feeding dosing extruder type ZSFE 50 twin screws with dm 48.5 mm with 4 kW each, speed up to 800 rpm.-1 Control cabinet with Siemens HMI Touch OPTIONAL at extra cost: 1) Screen-pack-changer changer 2) Vacuum pump 3) Pelletizing: ST strand, - WRG waterring or - UWP underwater pelletizing system 4) Granulate classifying sieve 5) gravimetric loss-in-weight blender / dosing system 6) Material conveying 7) Big-bag filling station 8) Start-up by our technicians Visit to our factory in Wuppertal. ...
in very good working condition
Specifications H&G HG/SV 11, Presto SP screw compactor 15 pieces available, made between 2004-2014 Weight: 1 800 kg Year of construction: 2004-2014 Tank volume: 25 m3 Power supply: 400V/50Hz 11 kW New containers available for the presented screw press
Technical data of the parallel lathe Kramatorsk mod. 1A670 used: - Diameter on the bench: 2500 mm - Diameter above wagon: 2200 mm - Spindle diameter: 2500 mm - Distance between tips: 19000 mm - Pallet width with 4 guides: 2300 mm - Weight allowed between the tips: 100 tons - Speed: from 0 to 130 RPM - Motor power: 140 kW - Tailstock cast: Ø 400 mm - New transverse axis ball screws X: Ø 80 mm - CNC: FAGOR 8055 TC - Weight: 150 ton - Dimensions: 25 x 4 x 3.3 m
Single screw Extruder Theysohn 63mm
Code 211321230614 Description Centerlathe Make ICOCA Model SJ – 410 x 1000 G Serial No. 8708004 Year 1987 Distance between centers 1000 mm Swing over bed 410 mm Swing over gap 650 mm Swing over cross slide 220 mm Spindle bore 51 mm Number of spindle speeds 12 Spindle speeds 40 – 2000 rpm Feeds Longitude and Cross Motor power 5 kW – 380 Volts Thread cutting Metric, W.W. Accessoiries 3 chuck Ø 230 mm Rapide toolpost Coolant Condition Machine is in very good condition
Screw compressor C9 Flow rate 1.1 m3/min 10 bar 7.5KW Hours 9000 Schematic E-Parts Compressor is unchecked.
Pressure: 10 bar Motor: 15 kW Free air delivery: 2,22 m³/min Measurement (WxHxD): 1815 x 1365 x 720 Weight: 380 kg Compressed air connection: 1
Pressure: 10 bar Motor: 5,5 kW Free air delivery: 0,736 m³/min Measurement (WxHxD): 480 x 955 x 907 Weight: 210 kg Compressed air connection: 1/2
Compounding - granulation line, consisting of: Extruder twin screw synchronization, drive 31 kW Segment screws and barrels, water-cooled Screws 2x Ø 35 mm – 44 L/D 1x degassing zone (atmospheric) 1x degassing zone (vacuum) 1x side dosage Screen changer double piston type K-SWE 101 with hydraulics Switchboard Water bath, granulator, etc. optionally also available on request.
Pressure: 10 bar Motor: 5,5 kW Free air delivery: 0,82 m³/min Measurement (WxHxD): 1113 x 854 x 626 Weight: 217 kg Compressed air connection: 3/4
Pressure: 10 bar Motor: 30 kW Voltage: 400 Volt / 50 Hz Free air delivery: 4,1 m³/min Measurement (WxHxD): 1350 x 1585 x 900 Weight: 590 kg Compressed air connection: 1 1/4
Pressure: 13 bar Motor: 3 kW Free air delivery: 0,219 m³/min Measurement (WxHxD): 480 x 955 x 907 Weight: 190 kg Compressed air connection: 1/2
Pressure: 10 bar Motor: 22 kW Free air delivery: 3,21 m³/min Measurement (WxHxD): 1610 x 1380 x 915 Weight: 580 kg Compressed air connection: 1
Screw compressor Boge 400 V 11 KW 1.45 m3/min 10 bar Accessories : belts, filters, small parts The compressor goes to fault after switching on:
Dosing screw INOX Length: 200 cm Diameter: 150 cm Motor: 1.1 kW Revolutions: 25
Pressure: 8 bar Motor: 160 kW Free air delivery: 27,9 m³/min Measurement (WxHxD): 2265 x 2005 x 1585 Weight: 3200 kg Compressed air connection: DN 80
Pressure: 10 bar Motor: 5,5 kW Free air delivery: 0,815 m³/min Measurement (WxHxD): 1890 x 1520 x 854 Weight: 437 kg Compressed air connection: 1/2
Pressure: 8 bar Motor: 30 kW Free air delivery: 5,31 m³/min Measurement (WxHxD): 1880 x 1730 x 966 Weight: 845 kg Compressed air connection: 1
Pressure: 7,5 bar Motor: 18,5 kW Free air delivery: 3 m³/min Measurement (WxHxD): 1250 x 1335 x 850 Weight: 400 kg Compressed air connection: 1
Pressure: 7,5 bar Motor: 11 kW Free air delivery: 1,74 m³/min Measurement (WxHxD): 1113 x 854 x 626 Weight: 220 kg Compressed air connection: 3/4
A Weiler Primus precision lathe with milling device is offered and extensive accessories in very good condition. A large part of the accessories are unused. Specifications: Center height 120 mm Distance between centers 420 mm Swing diameter over bed 245 mm Spindle bore 23 mm Spindle speeds 18 Speed range 60 - 3000 rpm Motor power 1.1 / 1.5 kW Motor spindle brake Large feed protection - chip protection hood External dimensions approx. Length 120cm Depth 750mm Height 170cm Weight approx. 500 kg Accessories: Multifix A - 5 steel brackets 3-jaw chuck Ø 125 mm 4-jaw chuck Ø 125 mm Various interchangeable jaws Thumper CGN-1969 Eccentric lathe chuck 80mm (unused) Face plate Carrier for rotary heart Standing bezel Moving bezel Collets for internal and external clamping Various moving bezels Extensive accessories for milling equipment such as clamping screws, cl ...
Recycling machine trade AGICOM- Pedergnana OG: Screw conveyor demonstration device - for the transport of granules. Construction: Metal construction with drive and transmission gear. The discharge height can be adjusted by adjusting the legs. electric motor 1.1 kW; Length 2.5 m
Käser ASK 32 T with integrated cold dryer Screw compressor Age: 2008 Rated Output: 18.5 kW Max. working overpressure: 8 bar Motor speed: 2950 1/min Sigma Control Integrated refrigerant dryer
Pressure: 7,5 bar Motor: 110 kW Free air delivery: 20,5 m³/min Measurement (WxHxD): 2930 x 1990 x 1620 Weight: 3450 kg Compressed air connection: 3
Pressure: 7,5 bar Motor: 18,5 kW Free air delivery: 3,12 m³/min Measurement (WxHxD): 1610 x 1380 x 915 Weight: 550 kg Compressed air connection: 1
Ref. -No.: 10258 Manufacturer: SCHAERER Type of control: Konventionell Storage location: Halberstadt Country of origin: Germany Lining: Forkardt F315 Brand Machine length: 3.800 mm Machine width: 1.300 mm Machine Height: 1.500 mm Weight Of The Machine Ca.: 4 t Tool holder type: Multifix Typ C Turning Length: 1.800 mm Turning Diameter Over Bed: 520 mm Turning Diameter Over Slide Rest: 320 mm Spindle Bore: 62 mm Bezel diameter (inside): 270 mm Hole in the jaw chuck: 84 x 120 mm
Pressure: 13 bar Motor: 18,5 kW Free air delivery: 2,32 m³/min Measurement (WxHxD): 1610 x 1380 x 915 Weight: 550 kg Compressed air connection: 1
maximum number of results exceeded
please refine your search
50 € 
