extruder pipe used for sale

Here is a list of available equipment for pipes and profile extrusion from EU constructors., New equipment is constructed by renouned German Constructors, Used equipment is in good working conditions, Check the PDF list below and revert to us with your inquiries., Be very specific in yuoe questions and please don not forget to give your full contact, yourname, your Company name, Country, Whatsapp and phone no. Well be happy to assist you.

welding line for galvanized and black pipes.

Saw for Pipe Cincinnati RS 25 PZ S 1992 year 4000 Euro

Without Extruder Complete Line for Pipes 63-140 mm Reifenhauser only 20.000 working Hour // very good condition consist of following elements ; 1. Vacuum sizing tank Reifenhauser KKE-R 0125 nr. 70057 2. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 3. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 4. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 5. Pipe pulling device Reifenhauser A-R 0075 nr. 70059 6. Saw for Pipes Reifenhauser TSQ-R 0075 nr. 70060 7. Marking Machine Medek & Schorner FMS 2R-U nr. 758.45

Without Extruder Complete Line for Pipes 63-140 mm Reifenhauser only 20.000 working Hour // very good condition consist of following elements ; 1. 2. Vacuum sizing tank Reifenhauser KKE-R 0125 nr. 70057 3. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 4. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 5. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 6. Pipe pulling device Reifenhauser A-R 0075 nr. 70059 7. Saw for Pipes Reifenhauser TSQ-R 0075 nr. 70060 8. Marking Machine Medek & Schorner FMS 2R-U nr. 758.45

Safeline Pipeline metal detector 31652 Stainless frame pipeline metal detector, 150mm diameter aperture, with pneumatic reject,

Specifications: - max. material thickness at 40 kg/mm² strength approx. 3 mm - Shaft mount 45 mm - manual hydraulic feed of the top roller - E. foot switch - Drive 400 V / 1.1 kW - Space requirement approx. W 550 x H 1200 x D 1200 mm - Weight approx. 180 kg

X5 pipeline for pumped food inspection. X-ray inspection Year of manufacture 2019 the device has exactly 12 operating hours and is as good as new The X5 pipeline is perfect for inspection of a wide range of pumped and free flowing applications such as poultry, meat, slurries and sauces. The system, which is available with product pipes of 2.5, 3 and 4”, is capable of offering excellent detection of a wide range of contaminants including all metals, bone, glass, stone and dense plastics. The devices are in excellent condition and were replaced due to software changes. The maintenance was always kept, the devices are 10 years old, operating instructions see attachment. Find more here - .ucymachines/ Contact us at - sales@ucymachines

ID3502 OMAG Plant for large-diameter pipes  / Großrohranlage OMAG large pipe system (all hydraulic) including molds, bases, support rings, various accessories and forklift with turning tongs OMAG large-diameter pipe system (all hydraulic) including moulds, lower sleeves, support rings, various accessories and forklift with turning pliers

AgileX's PiPER is a lightweight robotic arm with six degrees of freedom for research, teaching, and rapid prototyping. With a dead weight of only 4.2 kg, the arm can be mounted on a table, a demonstration setup or directly on a mobile platform. It carries up to 1.5 kg, reaches a reach of 626 mm and operates with a repeatability of 0.1 mm. Integrated articulated drives ensure smooth movements. It is controlled via Python API, ROS 1 or ROS 2. The CAN interface makes it easy to connect to a higher-level computer, image processing system, or gripper. The temperature range of -20 to 50 degrees Celsius specified by the manufacturer allows tests to be carried out even outside of classic laboratory conditions. Typical applications: - Research and teaching at universities and educational institutions - Rapid prototyping of handling tasks - Pick-and-place tests with image processing - Mobile ma ...

Height=1.39 m, Overall length= 2.27 m, Overall width= 0.99 m, Net weight= 66 kg,

MICROSTEP MSF-Pipe-T 6501.200L tube and profile fiber laser was built in 2018 in Slovakia by MicroStep spol. S.r.o. The machine, which is designed for precision cutting of tubes and profiles of various cross-sections and non-standard shapes, is an excellent choice for modern business. This is because a number of state-of-the-art technical solutions guarantee the most accurate cutting results throughout its entire service life. 2D or 3D cutting is performed by means of a stable 2 kW fibre optic beam, which is generated by a resonator of the highest energy efficiency. The 3D laser scanner accurately measures the workpiece before machining to determine its actual shape along the cutting trajectory. Advanced algorithms then allow the control system to appropriately adjust the movement of the cutting tool and supports, as well as compensate any workpiece inaccuracies. The work area is c ...

Unused Outlet Pipe + Sleeves + Impellors of a Tetra Pak HMRPX 618 Separator., Ref 1 - Part No 540493 02 - Outlet pipe, Ref 3 - Part No 581978 01 - Guide sleeve, Ref 16 - Part No 540527 02 - Impellor bottom part Ø 140 mm, Ref 20 - Part No 540519 02 - Impellor top part Ø 140 mm, Ref 26 - Part No 540551 01 - Spacing sleeve, Ref 38 - Part No 540528 02 - Impellor bottom part Ø 120 mm, Ref 40 - Part No 540520 02 - Impellor top part Ø 120 mm, Type of Machine: Outlet set

We are selling here a remaining stock of underfloor heating hose from our new halls. A total of 408 meters. Brand: Uponor Magna Pipe Plus, 20x2,0mm. On pallet. We will be happy to answer any further questions you may have. We have placed more ads under ETW. In the CHP area.

Thank you for your interest in our gum extruder system we offer you as follows: many thanks for your interest on our new chewing gum extruder plant, please follow our offer find: AUTOMATIC EXTRUDING; ROLLING AND SCORING MACHINE 7 ´ ´ /. COMPLETE LINE for production of chewing gum sticks and Chiclets Manufacturer: WLS Type: Chewing gum Extrudier-, rolling and cutting machine gum extruder, rolling and cutting system Product: Chewing gum sticks and Chiclets Size (working width): 7 ´ ´ / 177mm other dimensions are possible on demand Type: WLS RAS 7 "with manual take-off Capacity: Approx stick gum. 200-250 kg / h / Chiclets approx. 250-350 kg / h Number of rolling stations: 4 Number of cutting stations: 2 Electrical: 400V 3 ph 7 "ROLLING AND SCORING MACHINE incl. EXTRUDER Conveyor belt is covered with powderin ...

Nakata Zoki Kobe, Japan (Troester design) Duplex Extruder Unit Dual 150mm dia PIN Type Extruders, Year of manufacture: 1990, with Roller Feed, and duplex Die. L/D ratio 16:1 Number of Pins: 10 Rows x 8 Pieces, Spare Pins included. Screw Speed 45 r.p.m. Motors 185kw D.C. variable speed, 415 volt, 3ph, 50hz. Full Books and Drawings available. Thyristor Drives included. Starter and Control Panel for Lower Extruder only. Die usable Width 18\\, In good condition.

Francis Shaw 90mm coldfeed rubber extruder.Year: 1992. Machine No.4846Vented. Side power roller feed,L/D ratio 20:1,H series David Brown gearbox,Thrige Scott 63kW, 2000rpm DC variable speed motor.Machine fully overhauled, cleaned/painted and fitted with NEW electrical control panel. With provision for 5 x TCU's.

Iddon HRX 4.5? (120mm) Cold Feed Rubber Extruder Year 1994 LD ratio 17:1 Bostock & Bramley Gearbox ABB Motor: 1994, 95kW, 1870 rpm, 419 amps, 360 volts With 1 x spare vacuum screw With Control Panel

Dominioni Punto & Pasta Pasta extruder machine Stainless 8Kg hopper with agitator and stainless screw, variable speed, variety of extrusion plates for different style pastas, mobile

available Troester Triplex Extruder Top machine QSM 90x 16D Middle machine 200W x 6D Below machine QSM 150 x 16D Head MW500 Description attached!

Z Blade Stainless Steel Mix Extruder Manufacturer: Winkworth Model: 14Z HMX Working capacity 22-25 litre Approx total volume of trough litres: 32 litre with Hasco Hydraulics Ltd power pack With Panel YOM Jan 89

Combex 90 Strainer Extruder Manuf.: AZ / VMI Screw diam. 90mm LD ratio 10-1 AC motor 37kW 1475rpm Year 2010 Complete with Temperature Control Unit and Controls Full manual / documentation available

Description Item # 9274 - FRESH PASTA EXTRUSION MACHINE Manufactured by LA PARMIGIANA Model D55-DV Type N INOX Year 1995 Including One Die Head Shape, large rectangular shape (similar to Churro) up to 35kgs per hour

UNION SINGLE SCREW EXTRUDER, barrel with 150 mm Ø screw, 40 L/D, electric cabinet, degassing system, nominal throughput rate ca.700 kg/h, missing of screenchanger - available semi-automatic on separate offer, missing of cutting unit - possible addition of strand/water ring/underwater on separate offer, This is an evergreen sturdy extruder

General SKU357X1337 LocationBarneveld MakeBuss Main Features Motor21.5 KW Inlet diameter50 mm L/D15 Specified Features - Mixing extruder Single screw mixing extrudercheck Screw dia.46mm L/D15 With heating zones3 DC-motor0,710-21,5 kW, 380 volt, 50-1520 rpm Screw speed300 rpm InletDia. 50 mm Feeding with hoppercheck Max. temperature250 MaterialStainless steel With jacketcheck General TypeMDK 46B Mach.No.87/652482 Year of construction1987 Mounted on framecheck Floorspace2,70x0,55 m Total height1,90 m Weight1000 kg Extra SpecificationsWith 2-roll cylinder, roll diameter 150mm, roll length 400mm, 0:55 kW, 220/380 volt, 1400 rpm, roll speed 3,6-18 rpmMixing extrudersGeneric medicinesPlastic & polymersCatalysts & fillersCosmeticsSolid pharmaceuticsDyes & pigmentsMinerals & inorganicBussExtruders > Mixing extrudersIndustries > Pharmaceutical > Generic medicinesIndus ...

General SKU379X944 MakeCollin LocationBarneveld Type20x20 D Main Features Motor4.5 KW Inlet diameter30 mm L/D20 Specified Features - Single screw extruder Single screw extrudercheck Working hours:1324 Screw diameter20 L/D20 Number of heating zones:4 Electric heatingcheck AC-motor4,5 kW, 3x 380/220 V Inlet30 x 20 mm Feeding with hoppercheck Number of temperature controllers:4 MaterialStainless steel With jacketcheck General No.32000892 Year of construction1992 With switchgearcheck Floorspace1,60x0,60 m Total height0,80 m Extra SpecificationsWith Collin granulator, 0-1400 rpm, 220/380 volt&:nbsp:Single screw extrudersPowdered foodsGeneric medicinesStarchAgrochemicalsDetergent & surf.CosmeticsLubricants & oleoAnimal feedOther feedConfectionerySolid pharmaceuticsDyes & pigmentsBiopharmaceuticalCollinExtruders > Single screw extrudersIndustries > Food & Feed > Pow ...

General SKU354T1381 MakeHosokawa Bepex GmbH LocationBarneveld TypeBX 200 T Main Features Motor3 KW Inlet diameter120 mm Specified Features - Mixing extruder Granulatorcheck Rotor granulatorcheck Rotor sizesDia: 200x50 mm Ring diecheck Die sizesDia: 200x55 mm Number of dies available:2 Die perforationDia: 2mm (4x), Dia 1,5mm(2x), 1,2x6mm Motor3kW, 220-240/280-420Volt, 1430 rpm With pre-mixercheck With motor1,5 kW, 220-240/380-420 Volt, 1400rpm InletDia: 120 mm (2x) With jacketcheck Mixing extruders MaterialStainless steel 1.4306 (304L), Stainless steel 1.4401 (316) General No.18227-01 Year of construction2009 Mounted on framecheck Mounted on wheelscheck With switchcheck With switchgear(as is) Floorspace1,3x1,05 m Total height1,75 m Weight680 kgMixing extrudersGeneric medicinesPlastic & polymersCatalysts & fillersCosmeticsSolid pharmaceuticsDyes & pigmentsM ...

General SKU269X293 MakeCollin LocationBarneveld CEcheck TypeTeach-line E20T and BL50T Main Features Motor9 KW Inlet diameter30 mm L/D25 Specified Features - Single screw extruder Single screw extrudercheck Screw diameter20 L/D25 Number of heating zones:2 Electric heatingcheck Air coolingcheck DC-motor1,1 kW, 400 volt, 1400 rpm Feeding with hoppercheck Max. temperature300°C MaterialStainless steel With jacketcheck General No.9120 3914 Year of construction2014 With switchgearcheck Floorspace0,85x0,65 m Total height0,70 m Weight100 kg Extra SpecificationsWith Teach-line film blowing line, type BL50T, dia. Take off rolls, 50 mm, roll width 200 mm, max bubble dia. 110 mm, speed 13 m/min,&:nbsp:winder dia. 52 mm, max pulling force 95N, max coil dia. 300 mm&:nbsp:Single screw extrudersPowdered foodsGeneric medicinesStarchAgrochemicalsDetergent & surf.CosmeticsLubr ...

General SKU357X1336 LocationBarneveld MakeBuss AG Main Features Motor49 KW Inlet diameter79 mm L/D17 Specified Features - Mixing extruder Single screw mixing extrudercheck Screw dia.69,8 mm L/D17 With heating zones3x Electric heatingcheck With jacketcheck DC-motor49 kW 460 V 2710 rpm Screw speed300 rpm Inletø 79 mm Feeding with hopperBuss ELS 70 Feeding with metering screw63 rpm MaterialStainless steel 1.4000 (410S) With jacketcheck General TypeMDK70-17D Mach.No.942500 Year of construction1988 Floorspace2 x 0,85 m Total height1,8 m Extra SpecificationsWith 3x temperature control units: Heating medium: thermal oil, electrically heated Max. temp.: 300 °CMixing extrudersGeneric medicinesPlastic & polymersCatalysts & fillersCosmeticsSolid pharmaceuticsDyes & pigmentsMinerals & inorganicBussExtruders > Mixing extrudersIndustries > Pharmaceutical > Generic medici ...

CRAMMED FEEDING UNIT, reconditioned, This unit can be synchronized to feeding screw from buffer silo and horizontal screw in extruder to grant a uniform, continuous feeding, for light scraps, mounted on a 130 mm extrusion line, totally reconditioned, possible addition of mastebatch feeder, availability: in stock, conditions: reconditioned, type: for up to 700 kg/h extruders

General SKU321S566 MakeWLS Gabler (D), :Pressquick PQ 12: LocationBarneveld TypeE-60/10 D Main Features Motor3 KW Inlet diameter345 mm L/D3 Specified Features - Single screw extruder Single screw extrudercheck Screw diameter60mm, Screw length 180mm L/D3 With jacketcheck AC-motor3.0 kW, 220/380 Volt With variable speed drivecheck Screw speed9-89 Rpm Inlet345x250mm Feeding with hopper- incl. mixer MaterialStainless steel With jacketcheck General No.12355 Year of constructionUnknown With switchgearcheck Floorspace1.8 x 0.7 M Total height1.35 M Weight560 Kg Extra Specifications:Without die plateSingle screw extrudersFood additivesWLS GablerExtruders > Single screw extrudersIndustries > Food & Feed > Food additivesBrand > WLS Gabler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any ...

General SKU292M351 MakeWysstec AG TypePharma-Extruder PHARMEX 35 T & Noduliser SPHAEROMAT 250 T No.11480 Mounted on framecheck Main Features Motor0.55 KW L/D6 Specified Features - Single screw extruder Single screw extrudercheck Screw diameter35 mm L/D6 D AC-motorcheck (1,5 kW Ex) With variable speed drivecheck Screw speed25-150 rpm Feeding with hoppercheck Capacity2-20 kg/h Single screw extruders With variable speed drivecheck (noduliser) MaterialStainless steel 1.4305 (303) Information LocationBarneveld With switchgearcheck Floorspace1,1x0,8 m Total height1,7 m Weight340 kg Extra SpecificationsNoduliser PHAEROMAT 250: - disc diameter: 250 mm - with outlet - with cover - motor: 0,55 kW (Ex) - with variable speed drive - disc speed: 0-1440 rpm Single screw extrudersPowdered foodsFeed additivesAnimal feedOther feedWysstecExtruders > Single screw extrudersIndust ...

General SKU004K022 MakeKraftanlagen Heidelberg LocationBarneveld TypeST-350/6D Main Features Motor180 KW Inlet diameter350 mm L/D6 Specified Features - Single screw extruder Single screw extruder:Pin extruder: Screw diameter350 mm L/D6 With jacketcheck DC-motor180 kW (400 V) + 53,7 kW (400 V) Inlet350 x 285 mm Screw can be heatedcheck MaterialMild steel With jacketcheck General No.91.02 4295916 Year of construction1991 Without switchgearcheck Floorspace5,5 x 1,7 m Total height2,0 m Weight11.000 kg Extra Specifications- With die head for 167 strands - With die face cutter - Extruder can be used for PVCSingle screw extrudersRubberPlastic & polymersDiscountPlastic & rubberNew arrivalsHeidelberg KrafExtruders > Single screw extrudersIndustries > Chemical > RubberIndustries > Chemical > Plastic & polymersDiscountIndustries > Recycling > Plastic & rubberNew arrivalsB ...

CDM PREALPINA REGRANULATING LINE 130 mm 2xdegassing, for PE PP PS PP PC ABS (it has been working with clean scraps only), extruder with 130 mm. screw Ø 40L/D, including buffer silo with agitators, horizontal extraction screw, crammed feeding unit synchronized to extruder screw, a.c. 283 kw drive, n.2 degassing pumps, semi-automatic screen changer 230 mm diam.screens , water ring pelletizing unit, stainless steel drying centrifuge, vibrating screen, electric cabinet, blower + pipings, vertical mixer, machine reconditioned, can be fitted with a [FIMIC RAS](.germanplast/listings/5241333-refurbished-fimic-ras-400-automatic -screenchager-reconditioned) fully automatic screenchanger, installed power - used power in work: about 60-65% : 435, capacity: 500-600 kg/h, availability: 5 weeks time, options available: fully automatic screenchanger, conditions: refurbished, type: double degassing for ...

Description Item #8855 – GUM EXTRUDER Manufactured by RBL (Italy) Used as a Pre-Extruder in a chewing gum line 2-Screws capacity at up to 400Kgs per hour One colour extruder

Description Item # 8783 - EXTRUDER twin screw (TWIN SCREW EXTRUDER) for the production of cereal flakes: Producer: PAVAN Model: TT92 Year: 2002 Dimensions: 6580 x 4150 x 3000 Productivity: about 400 - 600 kg/h Min. Extrusion temperature on the 1st section: 30 ° C Description: A twin screw extrusion device as a result of a continuous and automatic process, a great variety of flour and cereal starches / tubers, both mixed and pure. The materials from the dispensing unit are pre-mixed using a suitable device equipped with counterrotating blades (double shaft mixer) and then enter the mixing tank for kneading and homogenization. From the mixing tank, through a suitable screw device (forced supply), the mixture is forced into a group of cooking cylinders, in which the heating of the cylinders takes place to the desired stage, according to a predefined and automatically controlled temperature ...

Description Item # 8974 – GUM/ CANDY EXTRUDER and COOLING TUNNEL Last used for gum (to be made into chiclets) Including : CARUGIL STR-300D Extruder - Twin Head Extruder 8kW, 380Volts With Inclined Belt feeding into an EXECUTIVE Cooling Tunnel Type 1240301 400Volts, 50Hz With SIEMENS PLC Controls Including 2 x Freon R407C Compressors

Description Item # 8979 - GUM/ CANDY EXTRUDER & COOLING TUNNEL Manufactured by WLS Type KML Single Rope Feeding into a TOGUM Cooling Tunnel Model TOK 350-7-6 380Volts, 50Hz This was working with item #8680 candy cut and wrap

Description Item # 9265 - EXTRUDER Manufactured by CLEXTRAL Model EV32

Description Item # 9319 - BAR FORMING/EXTRUDING ROLLERS Manufactured by LEKOS (Slovakia) Model EXT-1020 Year 2016 1000mms working width SIEMENS Simatic HMI Plc Controls Set of Three (3) Forming Rollers (vertically stacked) Previously being used for Nougat Mass, Caramel, Syrup Layer Including Supporting Frame, Extruding Rollers, Cooling/Heating of the Rollers, Height adjustment of the top & middle roller, Mass Scrapping Mechanism, Mass Greasing Mechanism, Extruder Mass Storage Top Roller with 440mms diameter, Other Two Rollers with 630mms diameter Top Two Rollers can be adjusted, Bottom Roller is fixed Product thickness can be adjusted from 0 up to 30mms thick With Cold water Glycol Cooling Unit, to cool the rollers Still set up in the factory but no longer in production overall dimensions: 2851mm high x 1490mm deep x 2630mm wide weight: 3100kg

Colmec Italy 150mm dia coldfeed extruder, roller feed - 200mm wide, Screw length 2000mm, L/D ratio 13:1, with simple Spaghetti die/cutter assembly, jacketed barrel and cored screw for temperature regulation (no TCU's included). with 100HP, 1750rpm, 575V, 3ph, 60Hz AC motor (ex Canada) and controls. Fabricated bedplate. Screw height: 620mm. In very good condition.

Francis Shaw Extruder Screw diam. 100mm (4?) LD ratio 10:1 Roller Feed Brush DC Motor 100HP motor 1500rpm 460 volts Variable speed drive Complete with Control Panel

Iddon Extruder Screw diam. 38mm (1.5”) Motor: Reyrolle AC 11/2.2HP 220-250 380-440 volts 1500/300rpm 29/16.5amps Continuous rating

Bainite (India) model BMPX150 PIN type cold feed extruders, Year of manufacture 2013 Screw diameter: 150mm L/D ratio 16:1 Output: 1200 - 1500kg/hr Power roller feed (opening 175mm), provision for cooling, Screw speed: variable max 50rpm, Max operating pressure: 340bar (5000psi) 10 rows of 8 pins (80 total) With 210kW Siemens AC v/s motor through 28:1 reduction gearbox (service factor 1.75) Hinged extrusion head with C'clamp suitable for strip All mounted on a fabricated steel base Complete with electrical controls and VFD (Siemens make). Safety features as per European standards.

Semi - Automatic Butter Extruder and Shaping Machine fited on full stainless steel frame, Control panel. Two Stainless steel screw augers, stainless steel hopper. Manufacture : Dairy Machinery UK Model : DMUK EXSH1 Usage : Butter Extruding and Shaping Machine Shapes : Various Shapes and Sizes Condition : New Warranty : 12 months Spare Parts : Dairy Machinery UK

Extruder for food products. producer: model: MU A14342 machine performance: 1200 kg/h year: 2017

PREALPINA EXTRUDER 130 mm., For PE PP ABS PS PC PS, nominal throughput rate 500-600 kg/h depending on material and feeding rate, 200 kw. d.c. drive and starter (new 2019), Electric cabinet (in need of some refurbishing), CE compliance, users manual, electrical drawings, crammed feeding unit, Barrel with screw diam.130 mm.35 L/D, N.1 vacuum degassing pump, Constructed 1996,, offered : as is where is, good working conditions, installed power - used power in work: about 60-65% : 200, conditions: AS IS OR RECONDITIONED TO YOUR BUDGET EXTENT, options available: AS IS or RECONDITIONED, capacity: 500-600 kg/h nominal capacity

Brand Hans Weber Maschinenfabrik GmbH Type DS 8.7 Serial number DS 85 777 Type Screw Double screw Year of manufacturing 1989 Working hours 24.048 H Screw diameter 87 mm Be Ujvuzqzed Dvycelp Connection Load 90 kW