extrude used for sale

Key data: 130 mm, 35 , 600 U/min

Material: PE, PP, PS, ABS Details: DC motor, segmented screws and barrels, screw speed max. 300 rpm, degassing, vacuum pump, mass pressure and mass temperature sensors. Control cabinet for heating and motor control (NEW. Siemens S7) Screw Ø: 2x 130 mm L/D: 35:1 Motor: 500 kW (DC) Optional: side feeding, screen changer, GALA underwater pelletizing

Used Cincinnati conical twin-screw extruder model CMT 35. 2 pieces available: 1 pc. - new 1989 1 pc. - new 1990 Technical data: - drive: DC 9kW motor - heating zones: cylinder - 3, head - 3 - cylinder cooling - oil - vacuum degassing pump

Twin-screw extruder, parallel, counter-rotating Producer: AMUT Screw diameter: 92 mm L/D ratio 28:1 Drive motor: 60 kW (400V, 50Hz, 3ph) AC Two sets of screws (for ABS and PVC processing) Oil unit for thermostatting of PVC screws Number of cylinder heating zones 7 Number of heating zones of the head and adapter 5 + 1 number of cylinder cooling zones (air) 4 Without control (control components available)

Weber DS60 Twin screw extruder pipe machine Molds from 16 inches to 125 inches available Screws have been bought recently Capacity : 200 KG per hour

AVITA EXTRUDER It is a single layer extruder with a single screw. Its production capacity is around 50/60 kg per hour. This machine is designed to make small and medium widths (with printing if necessary) in shrink or bundling. Year 2018 (commissioning 2020) very little served HD and comics production Maximum width 900 mm Double winder for film Micro perforation 2-color printing unit – 600 mm cylinder + sleeve cylinder 3 dies: 70 – 80 – 130 3 air rings 4-component Plast’control mixer

Mikrosan 90/23 PVC parallel extruder machine Capacity : 350 Kg / hour Machine is in good working condition. It can be seen in production. Screw and barrel has been recently replaced with new one.

Granulation line consisting of: a system of gravimetric mixers TGP-5 for 4 components with pneumatic loaders of the TAL -920G brand 2018, with a capacity of 2x700 kg / h, an extruder Battenfeld BEX 2-107 / 22 with a receiving hopper, power -75 kW, productivity-600 kg / h; hot water ring cutting device, cyclone GXC2660 and storage hopper.

The complete line for extrusion of OMAM (co-extrusion) film consists of a set of devices that, in combination, enable the processing of thermoplastic materials, mainly polystyrene (HIPS) with a thickness of 0.2-2.5mm and a width of up to 1000mm (for film) and 0.5- 3.0mm and width up to 1000mm (for plates). Equipment production year 1996.   The main elements of the extrusion line are: dispensers TR 120 extruder TR 60 extruder flat head (nozzle) calender roller assembly extraction unit winder mill granulator console thermoregulation switchboard control panel  The maximum length of the extrusion line is 31.45m  Maximum embossing line width 7.88m  Maximum height of the extrusion line 4.01m  Technical data of TR 120 and TR 60 extruders cooperating with each other constituting an integral part of the device            ...

Producer: Metalchem sp z o.o. (today ICHEMAD-Profarb sp. o.o., ichemad) A demonstration device, presented at the fair. Product: single-screw extruder with a head with a spiral core Purpose: for the production of single-layer HDPE pipes in the form of granules, up to a diameter of 250 mm The main technical parameters: extruder: - screw diameter 90 mm - the relative length of the screw 30d - barrier type barrier, high-performance for HDPE - installed power ~ 170 kW - design performance ≥ 450 kg / h   Head - number of heating zones 8 - heating power 33.4 kW (230V) - equipment: fitted mouthpiece and a core for the production of Ø180x16,4 pipes   Control system: The extruder is equipped with a microprocessor control and visualization system based on a central Allan Bradley controller with an industrial monitor with a function keyboard with standard contro ...

Plastic hose manufacturer extruder For processing LDPE, HDPE and regranulate, so far only clean original material was used within. Production size (tube width): 35 mm - 250 mm (without core change) Performance: depending on material thickness Pulley thickness: 25 mm Regularly maintained machine

Single screw extruder: - practically not used - we have instructions for the extruder - type WJ45 - produced by a Polish company - WW Ekochem - a device designed for the processing of plastics, soft PVC -consists of a drive system (15kW motor and gearbox), a plasticizing system (a cylinder with a screw mounted inside), a frame, a heating and cooling system and a head - Feeding the raw material from the gravitational hopper - control by means of a control device -control cabinet - length 190cm - width 80cm -height 184cm -mass 710 kg

Twin-screw extruder complete with gravimetric dispensers, water refrigeration system and bigbag weighing and filling system Sale of production line consisting of: • A BANDERA model 55LD42 twin-screw extruder; • A dispenser called “KYARA” positioned upstream of the extruder, in the part closest to the motor. The Kyara consists of four granule hoppers that mix up to four different materials. The mix obtained is then managed by a single main dispenser (DOS 1) positioned naturally also upstream of the twin-screw line. The charge of the four KYARA hoppers is completely automatic and managed by a blower positioned on the ground. The latter is connected with four lances which must each be inserted into a different bag of material that has been chosen mix. The mixture proportions are set by an operator directly on the panel control dedicated to the dispenser; â ...

Extruder welding machine, plastic welding machine, extrusion welding machine -Manufacturer: Munsch, extruder welding machine type SKR -Voltage: 230V -Welding wire: 5 rolls of Röchling Polystone P.grau-Cop Ø 3 mm -Price/tax: complete -Transport dimensions: 600/500/H400 mm -Total weight: 22.6 kg

Iddon 75mm Cold Feed Rubber Extruder With roller feed With motor, gearbox and control panel

Mikrosan MCV 55/20D twin screw extruder Price including compressor,chiller, mixer etc L/D rate : 20 PVC-U Capacity : Min 30 KG - Max 80 Kg/hour Machine is like new condition https://mikrosan/en/UrunDetay.asp?UrunID=21

The winder is part of a cast film system and is in good condition. Max. foil width = 2350 mm Max. roll width at inlet = 2600 mm, Max diameter roll = 980 mm Sleeve size 3", 6 Film thickness= 15 – 200 my, Max. speed = 250 m/min Edge trimming with razor blades, The winding can be in contact or gap Automatic loading of 3 inch sleeves from the sleeve magazine. Automatic unloading of the finished roll by means of a robot.

L/D=20.7 External dimensions 2700×1000×1400(LxWxH) Screw stiffness HRC65-68 Screw diameter 90mm Engine power 30KW/1470rpm SCREW LENGTH 1860 mm Heating section number/power 6kw×2

General SKU429T1358 LocationBarneveld MakeBrabender OHG Duisburg TypePlasti-Corder PL2000, Eurotherm Type 808 No.814 300 Main Features Inlet diameter15 mm L/D25 Specified Features - Single screw extruder Single screw extrudercheck (and with double) Screw diameter± dia.15 mm L/D± 25 Number of heating zones:1 With jacketcheck Air coolingcheck Inlet± Ø 15 mm Feeding with hoppercheck Max. temperature500 °C MaterialStainless steel Information Floorspace1,45x0,55 m Total height0,8 m Weight280 kg Extra Specificationswith two diffirent extruders headsSingle screw extrudersBrabenderExtruders > Single screw extrudersBrand > Brabender What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please vi ...

A110 Twin-screw side feeder (ZS-B) The ZS-B allows fillers and additives or chopped glass fibres to be fed in from the side in powder and/or pellet form. The co-rotating screw shafts are largely self-wiping and pro-mote active conveying. The feeder can be attached to the twin-screw extruder in conjunc- tion with a connection housing at any point in the processing section where feeding of the above-mentioned materials makes sense. The ZS-B can be quickly installed or removed using quick-change devices on the screw barrel. The ZS-B is designed with a wheeled base frame; a flat and smooth installation surface is required for this. Sufficient spacemust also be provided for installation and removal, as well as for cleaning. The twin-screw side feeder consists of the following component parts: ● screw barrel ● 2 screw shafts with positive engagement ● frequency-controlled motor  ...

The machine was built in 2023 Only medical EVA was used. Production was made for trial purposes and the machine did not get tired. Can absorb EVA, PE, and many soft materials.

Inv. Num. : 7186 Type: NE 7 Producer: WEBER Created: 1997 Parameters: Weight: 3200 kg

Extruder liner and screw from 25 to 140 Ø Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

Key data: 120 mm, 22

Output: approx. 255 - 450 kg/h (manufacturer's information from brochures; depending on material and profile; DEGUMA assumes no liability for actual, product-specific output) Straight head on hinged flange, fastening via screws; NEW SEVA motor, new control system

Key data: 120 mm, 18 , 45 1/min

Screw with vacuum zone, output approx. 255 - 400 kg/h, straight head

Key data: 90 mm, 12

Extruding height 1010 mm, Mailefer screw,

Used extruder CANOL, type: RON 1/380 -in good condition- - 380 mm roller width - Condition: Very good, ready for immediate use Viewing and test run are possible by arrangement.

Key data: 2 U/min, 25

Stock - No. 1665 1 Gebr. ERMAFA compounding line type E 90.2 - throughput up to 450 kg/h depending on material Built in 1987 consisting of: Extruder Twin Screw Ø 2 x 90 mm - 25 L/D Synchronous Segment screws and barrels, water-cooled Drive 75 kW DC , 1450 rpm. 2 x degassing zones, 1x vacuum pump Hydraulic screen changer screen - Ø 150 mm >> WITHOUT control / control cabinet, electrical diagrams for new control are provided by us ! SPECIAL PRICE Further extruders and compounding lines from the Wuppertal warehouse - ready for demonstration.

Key data: 172 mm

We offer directly on behalf of the owner : Twin-screw extruder Make : COPERION ( Werner & Pfleiderer ) Gearbox make : P.I.V Type : ZSK 170 W 1920/1750 Year of construction : 2021 / 2002 / 1986 Screw diameter : 172 mm Screw speed : 4,9 - 49 min-1 Max. torque : 17,500 Nm Main engine : 216 kW In the last 3 years, a total of over €420,000 has been invested in new components and factory overhauls (some of which were previously unused) The extruder was in use until Aug / 2023 and has already been dismantled ready for transport. The components are partly redundant and date from the years 1986 - 2021. The scope of delivery consists of : Twin screw degassing Coperion DSE 180 - 1 x year of manufacture 2021 ( 180 t€ ) Main gearbox P.I.V - 1 x year of manufacture 2002, factory overhauled ( 233 t€ ) in 2021, unused - 1 x year of manufacture 1986, factory o ...

Injection molding machines of types VRC 601 must exclusively be used for the filling of molds with various kinds of plastic materials. Other uses will be deemed a violation of the intended use and exempt U. Kolb GmbH from being held liable for injuries and damage to persons and/or property. Strictly observing the safety instructions and notes issued by U. Kolb GmbH is also mandatory and forms part of the intended use provisions to be adhered to.

This extruder from Periplast is in machine storage at Plastima Used Machinery. The extruder dates from 2005 and is in great condition. Brand: Periplast Model: Extrusora 25X25D Screw Type: Single Screw Screw Ø: 25mm Screw length: 25mm Motor power: 2.2 kW Year of Construction: 2015

Description: Recycling Line - Extruder Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg

Description: Recycling Line - Extruder Approx. Onsite Dimension. (l x w x h): 17,000 x 3,700 x 2,800 mm, weight approx.: 1 kg

Description: Recycling Line - Extruder Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg

Description: Recycling Line - Extruder Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg

Lobe Depositor and Extruder Comas DLV 450 Year of construction: 2008 Condition: very good Siemens control 450 mm working width Techincal details follow The DLV model cookie depositors are ideal for the production of wire cut and smooth mix deposited biscuits. The DLV is a flexible and versatile stand-alone machine that can also produce cakes.

The process engineering focus of the Doppstadt screw press is not on extracting as much biogas from the feed material as possible, but rather on providing a clean biogas substrate with a single machine, that requires no further treatment. Working chamber of the press screw diameter/length: 500mm/2000mm. Pressing baskets: round sieve holes with 8mm diameter. Feed hopper: volume: 5m³, feed height: 2900mm. Foldable one-piece rear belt: dimensions X/Y/Z: 5000mm/1200mm/3000mm with smooth belt. Eccentric screw pump for filtrate: max. delivery head/delivery length: 10m/15m. Throughput: 8-12t/h, liquid phase TS: 16%-23%. The machine is in mint condition with only 300 hours of operation. Including feed hopper DM 205, folding one-piece rear belt and eccentric screw pump for filtrate. Documentation available. On-site inspection is possible.

Colmec Italy 150mm dia coldfeed extruder, roller feed - 200mm wide, Screw length 2000mm, L/D ratio 13:1, with simple Spaghetti die/cutter assembly, jacketed barrel and cored screw for temperature regulation (no TCU's included). with 100HP, 1750rpm, 575V, 3ph, 60Hz AC motor (ex Canada) and controls. Fabricated bedplate. Screw height: 620mm. In very good condition.

Francis Shaw Extruder Screw diam. 100mm (4?) LD ratio 10:1 Roller Feed Brush DC Motor 100HP motor 1500rpm 460 volts Variable speed drive Complete with Control Panel

Collin 3 zone Extruder 150degC max temperature with transformer

Farrel Twin Screw Extruder EXTRUDER Type: TSS-12 Year 2009 With double screw for processing rubber Extruder screw speed (Max.): 15.2 RPM Motor 175kW, 1485 rpm Without Control Panel

Bainite (India) model BMPX150 PIN type cold feed extruders, Year of manufacture 2013 Screw diameter: 150mm L/D ratio 16:1 Output: 1200 - 1500kg/hr Power roller feed (opening 175mm), provision for cooling, Screw speed: variable max 50rpm, Max operating pressure: 340bar (5000psi) 10 rows of 8 pins (80 total) With 210kW Siemens AC v/s motor through 28:1 reduction gearbox (service factor 1.75) Hinged extrusion head with C'clamp suitable for strip All mounted on a fabricated steel base Complete with electrical controls and VFD (Siemens make). Safety features as per European standards.

Iddon Extruder Screw diam. 38mm (1.5”) Motor: Reyrolle AC 11/2.2HP 220-250 380-440 volts 1500/300rpm 29/16.5amps Continuous rating

Barwell Midi Preformer Extruder 25 litre Complete with rotary cutter

Extruder for food products. producer: model: MU A14342 machine performance: 1200 kg/h year: 2017

AMUT TWIN SCREW PIPE-PROFILE EXTRUDER, twin screw extruder with screw Ø 30 mm. 22 L/D, just extruder with control panel, machine in very good conditions, constructed in 2007

This NANINNI RENATO PV- EXTRUDER MOD.PV800M-AT was manufactured in the year 2021. The machine has a Pneumatic working pressure of 6 bar and a Hydraulic working pressure of 200 bar.

This Extruder from Berstorff is in machine storage at Plastima Used Machinery. The doser is from 1988 and is in fine condition. – Brand: Berstorff – Construction year: 1988 – Screw Ø: 200mm – Engine: 337 kW – Single-degassing incl vacuum pump accessories

TECNOVA MONO SCREW EXTRUDER 130 mm 54 L/D double degassing system For LDPE HDPE PP PC PS ABS, Average output 400/600 kg/h depending on material and feeding rate, Total installed power 530 kw, – about 318 kw used in work Construction year 2015 Screw diam. 130 mm 54 L/D Bi-metallic barrel A.c. motor 200 Kw + inverter Double degassing system (degassing points about 2 mt.apart for excellent results) non-stop screen changer with diam.300 mm screens AVAILABLE FITTED WITH FULLY AUTOMATIC SCREEN-CHANGER NEW or USED Hydraulic pack Vented electric cabinets Water ring pelletizer Stainless steel centrifugal drier Vent The line is offered TOTALLY RECONDITIONED Find out on our how we recondition [HERE](https://www.germanplast.eu/pages/photo-gallery), possible addition of vibro classifier, bag filling/weighing station, upstream equipment, Availble on request: scrap silo + auger + crammed feeder, [h ...

for PE PP PS PC ABS, Barrel with screw Ø 130 mm. 35 L/D, feeding hopper Vacuum degassing pump Non-stop hydraulic screen changer Water ring pelletizer Drying centrifuge Water tank and heat exchanging unit N.2 control cabinets Offered AS IS

THERMO FORMING MACHINE ILLIG RDM K 50 WITH INLINE EXTRUDER (COMPLETE LINE) M. No.: 322 Counter: 80188 hours // Power: 800-1000 kg/h Max. film width 700-800 mm Equipment / Additional information: The machine is constructed as follows: -Kuhne Extruder KF70E & Co. Extruders K45-24D -Colotronic dosing unit CSK30 with 4 components -Kuhne smooth and cooling rolls (calendering) / GA4/900; puller: BA2-1/900 -Thermoforming machine ILLIG RDM K 50 -Greiner stacking / Transfer device R3 (No.:00020) // Age: 1998 -Illig mill RS75B // Age: 1999 Fully existing infrastructure; control cabinets, pumps, etc. Heating from above and below Material PS and PP were processed 450 Ps // 350 Pp