extract used for sale

Welding fume extraction, soldering extraction, laboratory extraction High vacuum Torch extraction FUMATOR-APPARATEBAU HEINZ WAGNER Type Minivac 250 D series. No. 2902619 Year of construction 2004 Unit air volume flow max. 250 m3/h Minimum air volume flow rate min. 100 m3/h Separation efficiency 99.97 % Welding fume class W3 Motor power approx. 0.75 kW Mains connection 230 volts, 50 Hz - Suction power infinitely adjustable - 2 pieces Suction connections 45 mm - mechanical air filter (used) - mobile underframe with 4 fixed castors, platform roller Space requirement L x W x H 700 x 500 x 600 mm Weight suction 35 kg Weight platform roller 7 kg good condition; used

The IQ control keeps the set air flow the same during runtime. MA-201030 Optional: In stainless steel, , hose set, VOC, filter change signal, start/ stop via external 24V - the compact device offers many areas of application - the filters used are characterized by a long service life - the two filter cassettes separate dust, fine dust and gases - the air flow is 850 m³/h - the dimensions are 1197 mm x 600 mm x 790mm (HxLxW) - Weight 140 kg - Noise level less than 61 dBA Options: - Suction hose in the necessary length - Connection sleeves - various suction nozzles Typical applications : Marking laser Engraving laser Cutting lasers Welding laser Soldering and welding fumes

Suction AD-Oracle IQ from Bofa - New : The IQ control keeps the set air flow the same during runtime. Optional: In stainless steel, , hose set, VOC, filter change signal, start/ stop via external 24V - the compact device offers many areas of application - the filters used are characterized by a long service life - the two filter cassettes separate dust, fine dust and gases - the air flow is 380 m³/h - the dimensions are 980 mm x 430 mm x 430 mm (HxWxD) - Weight 68 kg - Noise level less than 60 dBA Options: - Suction hose in the necessary length - Connection sleeves - various suction nozzles Typical applications : Marking laser Engraving laser Cutting lasers Welding laser Soldering and welding fumes

Extraction AD-Oracle from Bofa - new : with start/stop via external 24V optional: in stainless steel, , hose set, VOC, filter change signal - the compact device offers many areas of application - the filters used are characterized by a long service life - the two filter cassettes separate dust, fine dusts and gases - the air flow is 380 m³/h - the dimensions are 980 mm x 430 mm x 430 mm (HxWxD) Typical applications : Marking laser Engraving laser Cutting lasers Welding laser Soldering and welding smoke

Extraction system, central extraction, room air filter system ETS Efficient Technical Solutions GmbH Central welding fume extraction Year of construction approx. 2005 Volume flow approx. 5000 m³/h Extraction connection at the filter inlet 1200 x 150 mm Exhaust air connection at the filter outlet 400 x 300 mm Motor power 10 kW Mains connection 400 Volt, 50 Hz - Control cabinet for wall mounting - pocket filter- Maintenance flap for filter change - Centrifugal fan on top of the system Space requirement L x W x H 2000 x 1650 x 3650 mm Transport height without fan 3100 mm Weight approx. 2000 kg very good condition; used

Filter system - extraction system, central extraction cartridges - pulse filter VALCO type Pidclean 4N Central welding fume extraction series. No.: 15003 Year of construction: 2003 Flow rate max. 3500 m³/h Filter area 92.8 m² Differential pressure 700 Pa Extraction connection at the filter inlet 250 mm Exhaust air connection at the filter outlet 225 x 160 mm Compressed air requirement 4 to 6 bar Motor power 5.5 kW Mains connection 400 volts, 50 Hz - Filter control AUTEL, type Eco S6 - pneumatic filter cleaning, automatic via control- 4 pieces cartridge filter 350 x 660 mm- Maintenance flap for filter change - Centrifugal fan on top of the system - Attachable dirt collection container approx. 40 liters - Silencer for fan outlet, 250 mm- Electrical diagram and operating instructions for the control available Space requirements L x W x H 2150 x 1350 x 2560 mm Weight approx. 550 kg good c ...

Extraction system for wall mounting Manufacturer Plymoth Special electrostatic precipitator system without paper filter! Type EFO5000 Electrostatic precipitator, function via electrical charging of dust particles. Used to extract oil mist. Details according to photos. Special price

volume capacity: 1600 m3/h feed volume: 99,9 % length: 3.000 Absaugschlauch mm motor: 230 Volt motor: 1,1 KW weight: 80,0 kg range L-W-H: 580 x 580 x 900 mm Description: The filtoo filter device newly developed by TEKA is a mobile filter system that many Tasks in the field of filtration of Smoking, dusts and gases can be used. Also suitable for high-alloy steels (stainless steel). (the device was based on DIN EN ISO 15012-1 (2005) tested and is IFA (formerly BGIA) certified (IFA No. 201020469/1140) for welding smoke class W3 (degree of separation:> 99.9%)) Where can the SIG 230 filtoo be used? - at welding workplaces - in the workshop area - for soldering applications - with restorers - in locksmiths Furnishing: - BGIA - certified suction and filter system IFA 1005030 for suction to hochleg. Steels & non-ferrous metals - Operating instructions in German optional equipment for a surchar ...

Cat. No. 11-3247 in very good condition in AISI 304 Measurements: Diameter: 2450 mm Height: 3500 mm Weight: 2950 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

1 rimless hydro extractor made KRANTZ, type GLEITSCHWINGER 1500 x 600 inside basket diameter 1.500 mm inside basket height 600 mm

Weibert WJ-ASA Professional Extraction system Power of the motor: 4 KW Suction power: 3900 m, m³/h Chip bags: 2 x 200 l Dimensions 580 x L. B. 1300 x h 2200 mm Driving device Connector 2 x 120 mm WJ-ASA Professional Special price: NET 890,-

Weibert WJ-ASA-Profi-P Aspirator Engine strength: 4 KW Extraction capacity: 3900 m3/h Chipbags: 2x 200 l Dimensions W. 580 x L. 1300 x H. 2200 mm Driving equipment Connection 2 x 120 mm with cartridge filter WJ-ASA-Profi-P

Tischgroess: 940 x 640 mm height: 800 mm flow rate maximum: 2500 m³/h power: 0.35 kW (0.5 HP) voltage: 230 V / 50 Hz weight: 95 kg

Air power: 2520 m ³/h filter surface: 1,45 m² maximum vacuum: 1800 PA suction connection Ø: 1 x 130 / 2 x 100 mm chip bag contents: 300 l Leerlaufdrehzah: 2950 RPM sound pressure: 87.1 dB S1 motor power output 100%: 1.5 kW (2.0 HP) engine power S6 40%: 2.1 (2.8 kW) voltage: 400 V / 50 Hz machine dimensions (W x D x H): 860 x 670 x 2330 mm weight approx.: 40 kg

The aspirator Wetzikon weather is 3 pieces in good condition, ready to use. It consists of intact plants, which have operated until now following machines: CNC machine Striebig vertical panel saw Planing machines Wide-belt sander Table circular saw Edge glue machine Moulding machine The exhaust system consists of 3 installations: 1 system with filter and 2 bag system 2 + 3 system with wooden box below and filter system various pipes and branches, 1 fan 3 HP, 1 fan 2 HP etc. Weight 350 kg Built in 1975 Subject to changes, errors, and intermediate sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Industrial suction hose Polyurethane flexible hose Industrial suction hose D = 80 mm linear meters of 10,50 EURO D = 100 mm linear meters of 13.90 EURO D = 120 mm linear meters of 15,50 EURO D = 140 mm linear meters of 18.50 euros D = 160 mm linear meters of 20.50 EURO D = 200 mm linear meters of 28.50 euros Continuous lengths 2,5m/5m/7.5m and 10 m available! (Hose length = solid state!) Special NET zzgl.19% VAT

Suction capacity: 2900 m3/h Engine power: 1,1 KW, 400V, 50 Hz, S1-chip bag contents: 200 l Connection: 1x140mm WJ-ASA-7

Weibert SA 205 Extraction system N E U machine extraction system SA 205 400V 2.2 KW (3 HP) Flow max. 2900 m³/h 2 dust nozzle 120 mm 1.7 m² filter area 1 chip bag 300 litres Fahrbahr Weight 70 kg G & WJ-SA-205

Aspirator Rachel with fan, 11 kW Chip feeding screw Pipes Built in 1995 L x W x H: 150 x 120 x 400 cm Weight approx. 2500 kg The machine is in good condition, ready to use. Subject to changes, errors, and intermediate sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Suction register: Make : Wolf Built: 2004 Dimensions: 3500 x 1500 x 650 mm and 2500 x 1500 x 650 mm (approx. LxHxD) only 4 pieces left in stock In addition, we offer: Exhaust air unit with exhaust air pipe and deflector hood depending on size. Rectangular sewer pipes 1200 x 600 mm, unit price € 50,- net from location. We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

Colour JET 2 Paint mist extraction Rated motor power: 0,75 / 2,1 kW Engine speed: 96 min 0/1,430 Air volume: 3,000 / 6,800 m ³/h Effective pressure: 400 / 500 PA Dimensions closed (W/H/D): 1,012 x 1.405 x 943 mm Folded dimensions (W/H/D): 1,897 x 1.405 x 1,166 mm Pre-and fine filter filter area: 1 m² Connection diameter: 300 mm Switch zweistuftig Compact construction, space-saving Powerful, high suction power,. low operating costs Easy maintenance, long filter life Universally applicable, variable accessories High flexibility Mobile design Suction technology with front plate system G & ALKO 19562801

Belts - oil separators Oil separator with KUNSTSTOFFGURT OPV - 1 / OPV - 2 This group of oil separators is recommended for industrial applications. The collection in the standard version is made of plastic without connecting traces, which is adapted to the requirements, e.g. polymer, elastomer, etc. All parameters such as performance, bandwidth, and so on are selected individually. An oil lifting height of up to 15 m is particularly useful in deep tanks, e.g. sewage treatment plants. The number after the marking (300/500/700/1000 mm) is the working length of the strip - depth from the mounting base. Complete oil separator with PU polyurethane tape. Belt color: green (standard), blue or white. Maximum liquid temperature up to 60°C. We have oil separators with a stainless steel belt INOX with a working temperature of up to 100 ° C at an additional cost. Maximum liquid temperature ...

RLA 160 Extraction system Dust nozzle diameter: 160 mm Engine: 2.2 kW 400 V 50 Hz Nominal volume flow at the nozzle: 1448 m ³/h Maximum flow rate: 2400 m3/h Filter surface: 9,21 m² Dust class M Residual dust content: H3 Chip collecting volume: 2 x 165 (193) l The maximum sound pressure level: 73 dB (A) Dimensions (L x W xH): 1755 x 830 x 1654 mm Weight: 267 kg G & pieces 5131620

Abegg to fan and the fan with fans Ziehl. noch nie benutzt NEW

Steam turbine Type: B + V, MARC2 - B10, back pressure with extraction Live steam pressure 58 bar 60.5 bar max Live steam temp.: 510 ° C Steam quantity: 45 t / h Extraction pressure: 21 bar 24.0 bar max Extraction temp.: 383 ° C 490 ° C max Extraction quantity: 7 t / h t 15 / h max Exhaust pressure: 3 bar 4 bar max Exhaust temp. : 180 ° C 262 ° C max Exhaust quantity: 28 t / h 47 t / h max Speed: 10.043 RPM Quick closing speed: 11,047 RPM Gearbox Generator Manufacturer LEROY SOMER KV voltage 5.25 Frequency 50 Hz Speed of 1,500 RPM maximum 1,800 RPM Power: 9,000 kVA Power factor: 0.8 Year of construction 2005 Operating hours: 16,000

1 rimless hydro extractor made KRANTZ, type GLEITSCHWINGER 1500x700 Inside drum diameter 1.500 mm, inside drum height 700 mm Machine is special reinforced execution with round base support and 4 Gleitschwinger feet

Stationaere welding smoke extraction with 1500m3/h suction suction systems and added cyclon dust separator Aspirator: Manufacturer Lincoln Norweld Prosessventilasjon AS Norway Series 2355 Type SP-15 1500m3/h 2050 mm/WG 380 Volt 34 Ampere 18.5KW Filter Manufacturer Lincoln Norweld Prosessventilasjon AS Norway Type SF-1500-G Filter Strainer system can be used immediately. Special price

380 Volt 2860 Rpm 300 m2 / h; ready for immediate use

Extraction system L x W x H: 2450 x 1340, + distance pipe incl. engine 1400 x 2900 mm Built in 1988 Weight approx. 400 kg The system can be screwed apart. Disassembly by buyer. The system is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC systems + technology GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Extraction system with 2 bags Connection ø 160 mm Fan 2,2 kW L x W x H: 200 x 70 x 220 cm Weight approx. 120 kg Built in 1982 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC system + technology GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Plasma extraction and filter system Filter BLOC TFK PL Series special central suction and filter unit for plasma smoke when burning and cutting the FILTER BLOC TFK PL series and CQC certified manufacturer according to ISO 15012 and CE drawing FILTER BLOCK - TFK PLASMA 40/60/80 Motor power 5,5 / 7,5 / 11 KW air volume 4000/5500/6200 m3 / h 124/186/248 m2 filter surface dust container 4x/6x/8x 84 liters Automatic jet cleaning system with testing for welding fume category W3 24 Months Warranty The price refers to the TFK PL 40 for further information on request; ready to use

HOLZKRAFT raw air extraction system ASA 1901 Product name: Raw air extraction system ASA 1901 Manufacturer: Holzkraft Item number: 5128191 Condition: As good as new technical details: • Filter area: 1.92 sqm • Rated power: 1,900 cbm/h • Chip collection volume: 110 l • Chip bag: PVC d= 414 mm Length x 1,100 mm Width/depth approx. 650 mm • Diameter intake manifold on the device: 203 mm • Diameter intake manifold at the distributor: 1 x 120 mm, 1 x 100 mm • Height filter cartridge: 2,100 mm • Sound pressure level: 85.7 dB(A) Hints: • The system is suitable for milling, planing and sawdust, but not for dust! • By rotating the intake unit by 180°, the suction direction can be done from above or below. This requires light conversion work. Engine data: • Motor power: 1.5 kW • Speed: 2,950 rpm • Power supply ...

Trilo SU 60 and SU 40 leaves and grass loading blowers on 1-axis chassis 80 km/h with road approval (ABE), equipped with Honda gasoline engine or hydraulic drive motor, 4-5 m long suction hose with hand socket for effective work handling. Further loading blowers are also available for attaching to the vehicle board or suction containers with integrated turbine in various sizes and variants. ------ Jodau Municipal, Environmental & Green Care Technology ------- Used machines for plant & sports field maintenance, gardening & landscaping, cemetery technology & winter service, sweeping & disposal, environmental care, motors and more...

Shut-off valve electr. "professional" Motor shut-off valve e/w galvanized Locking plate led to ball bearings 230v D= 220mm G&-4098-M385C

Emolsion vacuum cleaner Make: Ringler Type: RI 502-D 4 kW 2895 rpm 400V, 50 Hz with suction hose, and various inserts Condition: barved, but functional Only to traders is sold. All information without guarantee

Suction pipe: x 150 mm Details 2 pieces of flexible suction arms 3 m, without wall mounting / suspension

Suction system suitable for the offered plasma cutting system. New condition. Installation indoors and outdoors possible. Receptacle with quick release. Technical data â?¢ Connection power 11A â?¢ Air capacity 5000 m3/h 46 sheet metal processing machines for the production of angular and round air ducts, e.g. Spiro, Twin Seam, RAS, Prinzing, Tormec, Fasti, Hypertherm, Eisele, Dalex, etc. in our other displays, as well as on request.

New device incl.pre and combined filters The compact device offers many areas of application - the filters used are characterized by a long service life - the two filter cassettes separate dust, fine dust and gases - Dimensions 1197 x 600 x 790mm - Suction capacity 1250m³ / hour -400v ph 50/60Hz with red 16A CE plug - Hose connection 125mm Ø - incl. option external start / stop ( with 24V DC via 2-wire cable on the back side ) to activate via micro switch - Warranty 12 months ( filter excluded ) Typical applications : Marking laser Engraving laser Cutting lasers Options: - Suction hose in the necessary length - Connection sleeves - Suction nozzles

Suction slot duct system for passenger cars and trucks, exhaust extraction duct unit Npnfl Complete system with suction duct, trolley, suction hose, suction blower. Length approx. 20m, 3 suction hoses Aspirator

Power 3Kw Speed 2800 rpm Air volume 1000-3500Nm3/h Total pressure difference 1000-400 N/m3 Hdqibj2 Several suction pipes, trouser tubes, etc.

Sell a CFM Model 3156 sucker. This comes from a location closure of a pharmaceutical production - Manufacturer: Nilfisk/CFM - Type: 3156 - Wet/dry vacuum cleaner - suitable for the food industry - Weight approx.: 60 Kg - Year of construction: - Rotations: 2850 rpm Us8ybssd - Power: 1.5 kw - Connection voltage: 380 V, 50 Hz - Filling volume of waste bin: 25 L - Diameter connection for the suction pipe: 50 mm - Dimensions (LxWxH) in mm: 700 x 450 x 1300 - optical condition very good - with various suction nozzles, - used - functional

Sell a mobile suction system. Well suited for double grinding brackets, tool grinding machines Suction comes from a laboratory workshop and came for sale because of the site closure Dimensions 660mm680mm1900mm High top suction pipe Weight150Kg Ffirn32r Extraction capacity 1250m3/h Energy demand 1.1Kw

complete device Flow temperature max 55 C° Engine 1.05kW-230/400V 50 Hz was attached to DMG MORI we have even more suction systems. Please ask.

Weibert ASA 2803 Aspirator Rated volume flow: 2800m3/h Filter area 3.84 m2 Chip collection volume 240l Suction socket: 203mm Suction nozzle outlet: 3x 100mm Sound pressure level max. 87.5dB (A) Recording power 2.2kW Engine 400V 50Hz LxWxH 1500 x 500 x2100mm Weight 53kg

MABS1500 Extraction system metal for metal shavings easy filter change large collection container with drawer stable housing Engine: 1500W, 230V or 400V Suction capacity 1500 m3/h Fan wheel diameter: 300mm Suction connection: 100mm Weight 73kg

MOBILE RAUCHSANLAGE With the LAS 250 suction and filter system, the air can be cleaned directly at the workplace. In this way, nuisances and harmful effects from unpleasant odours are avoided. Due to the high filter performance, up to 2 workstations can be equipped. Characteristics: Low noise level Adjustable volumetric flow controller High-performance fans with minimal energy consumption Recyclable filter with high capacity Easy operation, maintenance and filter change Two ways to suck out the contaminated air: suction arm with attachment or hose (must be ordered separately from the manufacturer) Suction flange: 2 pieces for suction hose, diameter 50 mm Durable, brushless electric motor Throughput: 250 m3/h (8,829 ft3/h) Power: 0.37 kW (0.5 hp) Manufacturer: LOCTITE Type: LAS 250 All information without guarantee

Mobile industrial vacuum cleaner make RINGLER type RI 331 - W2GMachine -No: 87210For vacuuming up general and carcinogenic dust, particularly dangerous carcinogenic hazardous substances as well as many fine andProblematic dusts.Technical specifications:Air flow rate 360 Nm3 / hDust class main filter MSpeed 1400 rpm.Connected load 2.0 kWPower connection 220 V.Dimensions 855 x 760 x 1340 mmCollection container 50 lWeight 94 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

+ ATTENTION - PRICE DROP! + Prices are rising, ours are falling! + Our prices are reduced by 50% now, + due to warehouse restructuring! + Also, consider taking a look at our other offers in stock. Industrial extraction system NESTRO NE160 manufacturer: NESTRO Lufttechnik GmbH type: NE 160 mach.-Nr.: 1041 year of construction: 1994 comm.-Nr.: 0549/210/100/0859 stock-Nr.: 1803 + Regular Price: 2.180,- € > Reduced Price: 1.090,- € BN + All prices are shown without taxes (net price) Technical Data (According to manufacturer) intake manifold Ø: 160 mm filter area: 11,5 m² volume flow: 1.780 m³/h (after cleaning) Negative pressure in front of ventilator: 3.000 Pa Minimal volume: 1.447 m³/h Negative pressure in front of ventilator: 3.550 Pa Negative pressure at connection: 3.100 Pa – (4,0 m hose length mit Ø 160) working temperature: 5° to 4 ...

Domino Lasers, Succion system with carbon filter. Can be used for Domino lasers markers or for others Engraving lasers systems.