extr used for sale

Dimensions (L/W/H): 2070x800x2500 mm Weight: 450 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2570x1100x2490 mm Weight: 400 kg Total power requirement: 4 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2000x800x2500 mm Weight: 400 kg Total power requirement: 2,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Polypropylene Arm Hood with ceiling bracket & 400mm PE transparent Dome (Dia 75mm X 1500mm) Currency: MYR PIC: - Dr. Wong Sze Ting (013 939 6151/ wongsttopglove.com.my) - Ms. Fatimah (013 628 7197/ fatimah_asmadtopglove.com.my) - Ms, Farha ( 01111936236/ nurfarha_atopglove.com.my

1 shaft with direct gear drive; Feeding spiral is driven by gearbox; Mouthpieces and spare parts are provided separately on pallet; Control cabinet with control (in need of renewal) is included; Length 3.70 m, width 1.10 m, height without hopper 1.35 m, hopper height 0.50 m, inlet opening 35 x 35 cm Current type: 3-phase AC; Operating voltage 380 V; connected load 2.5 kW, motor type KMR 160 M8; Engine power 11 kW; Engine speed 720 rpm. The plant was shut down in 2024. more photos on request

Ethos X Microwave Extraction -Currency: MYR PIC: - Ms. Fatimah (013 628 7197/ fatimah_asmadtopglove.com.my) - Ms, Farha ( 01111936236/ nurfarha_atopglove.com.my)

COMAC TWIN SCREW EXTRUDER EBC60, barrel with n. 2 x 60 mm. diam co-rotating screws, 42 L/D, for PE PP ABS PC PS, compounds, masterbatches, Average throughput rate 600 kg/h depending on material and feeding rate, 2 spare screws and 1 barrel reconditioned to 100% performances, Mounted: screws + barrel in very good conditions, n.1 dosing unit with hopper, N.2 vacuum degassing points, d.c.132 kw Siemens main drive 400V 50 Hz (possible replacement with a.c.motor), non-stop hydraulic screen-changer with 90 mm screens (available with fully automatic screenchanger, on separate request), hydraulic pack, fitted with strand die (available with water ring pelletizer on request) + stainless steel cooling bath with heat exchanging unit + air-blowing dryer, electric cabinet (for extruder, screen-changer, hydraulic pack), pelletizer for strands, TVV Cooling column for granule., constructed i n 2001, The ...

Key data: 130 mm

Stock# UG6397 Used line for WPC (wood plastic composite) acoustic panels production. Line had been working on acustic panels with width 600 mm x length up to 6 m. Maximal possible width up to 900 mm. Line consist of: - Twin screw, co-rotating extruder by Weber (D) model DS 13.27. Machine has twin screws, each with diameter 130 mm. Working length LD = 27. Extruder is driven by el. motor 145 kW. Barrel has 12 heating zones, each with el. heaters 5.5 kW. Includes Transi-Tec mixing and dosing device and unused spare barrel. - Calibrating table by Techno-Plast with 4 pcs of vacuum pumps (each power 4 kW) and one blower with power 1.1 kW. - Pull-off with a saw by Techno-Plast, driven with motor 5.7 kW - Profile collection table - Vacuum pump (Busch) - ONI water cooling exchanger Line new in 2010.

Key data: 7500 m³/h, 4 kPa, 8 kW

TEKA Filtercube 4H Welding Fume Extraction with Siemens Control & Spark Trap (built in 2021) For sale is a high-quality TEKA Filtercube 4H welding fume extraction system including Siemens control and integrated spark trap. The facility is in very good, well-maintained condition and has been regularly professionally maintained. It was reliable in industrial use until the end. Technical data: Manufacturer: TEKA Model: Filtercube 4H Year of Make: 2021 Power: 7.5 kW Volume flow: 4,800 m³/h Negative pressure: 18 mbar (1.8 kPa) Control: Siemens Control Integrated spark trap Scope of delivery: TEKA Filtercube 4H extraction system Integrated spark trap Siemens Control Not included: Extraction arms Piping / Piping System Condition & Use: Very good, well-maintained condition Regularly serviced Fully functional and ready to use Ideal for industrial welding fume ...

Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Cartridge dust extraction system -Manufacturer: Donaldson, Filter system cartridge filter -Type: Torit Downflo DF 6 -Motor power: 3 kW -Volume flow rate: 2500 m³/h -Filter cleaning: pneumatic -Extraction opening: 3x Ø 320 mm -Dimensions: 1650/1300/H2740 mm -Weight: 835 kg

KAUTEX KCC30 Extrusion Blow Molding Machine Year: 2012 Operating hours: 33,000 h 1 station Clamping force: 300 KN Screw diameter: 90 mm 4 kg accumulation head (HDPE)Platen Dimensions : 530 x 700 mm Distance between plates 1000 mm Maximum mold dimensions: 870 x 650 x 765 mm Control system Blow command Head type: Vertical head with hydraulic accumulator Maximum container volume: 30 liters Die diameters: 90, 150, 170, 190 or 220 mm Maximum pressure: 220 bar Air consumption: 95 m3/h Pressure air: 6 - 10 bars Installed power: 20 KW Number of temperature zones: 5

Rod line consisting of: Feeding system with agitated hopper Werner & Pfleiderer extruder ZSK model Ø53x33D twin-screw Manual filter changer, CFM75 model 10-strand + 6-strand rod granulation head TI400/4 4 M immersion tank Periplast dryer Granulator Screening

Clean air extraction HÖCKER-POLYTECHNIK Vacumobil EA 250-4 -geAir filtration by means of filter bags, cleaning motorized, dust-tested, mobile collection container---------- Technical data ----------extraction nozzle: 250 mm, nominal volume flow: 4,241 m³/h, minimum volume flow: 3,534 m³/h, number of bags: 3 pieces, motor: 4 kW, dimensions (LxWxH): 2,500x1,280x2,500 mm, weight: 630 kg

Rollable chip extraction for aluminium or PVC

Used NFC juice extraction line. New 2018. Line capacity: 500–700 L/h Suitable for cold-pressing juice from most fruits and vegetables. The line includes: -Belt press made by Stalmont, type: PT 1000 Technical descibtion: The PT-1000 belt press is a device used for pressing apple must. This process takes place between the belt and the press's rollers, which are arranged appropriately. The pressed juice is pumped into the pasteurizer tank. Kebi N Hefglxxemm Helt Technical specifications: Capacity: up to 900 kg of apples/h (approx. 700 l/h) Juice yield from pressed apples up to 75% Installed power: 1 kW 230V Dimensions L x W x H (mm): 2230x1190x1250 Weight: 700 kg Belt width: 500 mm Belt speed: adjustable Juice tank with a sieve (mesh diameter = 1 mm) Juice pump -Grinder, -Crate-pallet maker. Very good condition. Equipment is well-maintained and clean. Regularl ...

Radial fan, dust extraction fan, fan, extraction, dust blower -Manufacturer: Ferrari, Radial fan in soundproof container -Container manufacturer: Wagner Lufttechnik -Engine: Siemens, 11 kW -Speed: 1460 rpm -Pressure and volume performance: unfortunately not visible -Fan wheel: Ø 700 mm -Connection input: Ø 790 mm -Connection output: 700 x 500 mm -Quantity: 2 blowers available -Price per piece -Dimensions: 2130/2135/H2480 mm -Weight: 1325 kg

Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, extraction blower, radial fan, ventilation fan, radial blower, blower, fan -Manufacturer: Nicotra, fan, blower, radial fan -Type: 12/9 DD -Motor: Aertenica 1.5 kW 1360 rpm -Fan wheel: Ø 235 x 240 mm -Inlet connection: Ø 260 mm -Output connection: 300 x 215 mm -Dimensions: 520/490/H400 mm -Weight: 25 kg

Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, extraction blower, radial fan, ventilation fan, radial blower, blower, fan -Manufacturer: Aertenica Nicotra, fan, blower, radial fan -Type: 12/9 DD -Motor: 1.5 kW 1360 rpm -Fan wheel: Ø 225 x 240 mm -Inlet connection: Ø 260 mm -Output connection: 300 x 200 mm -Dimensions: 520/490/H400 mm -Weight: 25 kg

Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, extraction blower, radial fan, ventilation fan, radial blower, blower, fan -Fan: Blower, radial fan -Type: 2-stage -Motor: ASEA 0.4/0.1 kW 1390/690 rpm -Fan wheel: 2x Ø 200 x 80 mm -Inlet connection: Ø 160 mm -Output connection: 190 x 180 mm -Dimensions: 815/590/H400 mm -Weight: 33 kg

Clean air extraction ALKO Power Unit 200P -used air filtration by means of filter bags, cleaning pneumatic, dust-tested, mobile collection container---------- Technical data ----------extraction nozzle: 200 mm, nominal volume flow: 2,261 m³/h, max. vacuum: 2,174 Pa, number of bags: 2 pieces, motor: 3 kW, compressed air connection: 6 bar, dimensions (LxWxH): 2,300 x 850 x 2,050 mm, weight: 470 kg

Waste-Box Collector, Waste Collector, Blower, Fan, Filter System, Radial Fan, Dust Extraction Blower, Fan, Extraction, Dust Blower -Dust extraction blower: with filter gases -Monitoring device: for the amount and quality of waste in the waste suction system -for sampling: on teasels or cleaners -Motor power: 2.2 kW -Speed: rpm -Inlet connection: 1x Ø 300 mm, 2x Ø 100 mm -Dimensions: 1200/800/H1700 mm -Weight: 248 kg

Welding Fumes Extractor SAF AZUR Voltage: 220 V mono Width: 800 mm Depth: 1200 mm Total height: 1200 mm Tubing height: 2000 mm

Welding Fumes Extractor CAPTAIR type 100 Year of construction: 1995 Voltage: 380 V Tubing Length: 3000 mm Width: 600 mm Depth: 500 mm Total height: 1300 mm

Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, extraction blower, radial fan, ventilation fan, radial blower, blower, fan, fume extractor -Manufacturer: Exhausto Exodraft, smoke extractor Type: RS -Motor: 0.03 kW 1350 rpm -Inlet connection: Ø 280 mm -Dimensions: 360/360/H290 mm -Weight: 11.7 kg

Key data: 108 mm

Theysohn TTS 108-26/CON 40 with coexrurder 40 mm // 2011 year prod. // Control Panel TEC-2TS

Key data: 63 mm, 1750 1/min

double extruder Theysohn CON 63 with Coextruder CON 40 PCV // 2008 year prod. // Main Drive Power - 37 kW // Control Panel Colour TEC-2TS

Offer 19370 Technical data: - Volume flow approx. 1447 m³/h. - Negative pressure 2200 Pa - Filter area 9.5 m² - Drive power 400 V / 2.2 kW - Required space W 1750 x H 2150 x D 900 mm - Weight approx. 350 kg

A mobile welding fume extraction unit is offered. Max. air volume flow: 3000m³/h, max. pressure: 3000Pa, motor power: 1.5kW, separation efficiency: >=99%, noise level: approx. 70dB(A), filter cleaning: automatically shaken off, filter type: washable filter cartridges, control system: digital control with display. Equipped with filtoo mobile extraction unit, year of manufacture 2022, incl. 3000mm extraction arm, spark protection screen. Inspection possible by appointment.

Clean air extraction ALKO 200 with FU -used air filtration by means of filter bags, cleaning pneumatic, dust-tested, mobile collection container, frequency converter, pressure transmitter for demand-based control---------- Technical data ----------extraction nozzle: 200 mm, nominal volume flow: 2,261 m³/h, max. vacuum: 2,446 Pa, number of bags: 2 pieces, motor: 4 kW, compressed air connection: Max 8.5 bar, dimensions (LxWxH): 2,280x1,010x2,050 mm, weight: 470 kgQuality info: - complete Basic inspection - complete

Single screw extruder manufactured in 1986. This PREALPINA Prealpina 105 × 30D features a screw diameter of 105 mm and an output capacity of up to 300 kg/h. It is designed for processing various post-consumer plastics, including PE and PP. The machine includes essential components such as a gravimetric dosing. If you are looking to get high-quality plastic recycling capabilities, consider the PREALPINA Prealpina 105 machine we have for sale. Contact us for further details.

Universal compact dust extraction system with compressed air cleaning. The sound-insulated hood ensures quiet operation whilst protecting the suction unit from contamination. Motor housing with integrated tank or shaft cleaning unit, direct-drive fan with three-phase motor, aluminium turbine impeller, pressure gauge with pressure reducer and quick-connect nipple for connecting the compressed air supply. Control box with motor protection switch or automatic control for fully automatic compressed air cleaning during operation. Filter housing made of galvanised, powder-coated sheet steel with replaceable filter cartridges and built-in pre-separator including baffle plate. A bucket frame with a release mechanism is provided for waste disposal., Additional title: for kieselguhr dust, Capacity: 1800000 l/h, Filtration area: 15 m², Power: 3 kW, Current: 6,3 A, Voltage: 400 V, Frequency: 50 Hz, ...

Extraction system for removing dust from the ambient air. The motor drives a fan impeller, creating negative pressure. The air is sucked into the machine via the intake manifold and reaches the filter elements. The treated air is then blown out again., Additional title: Workshop dust extraction, Nominal flow rate: 1400 m³/h minimum flow rate: 1,108 m³/h, Power: 2.2 kW, Current: 5 A, Voltage: 400 V, Frequency: 50 Hz, Base construction: on a mobile frame, Features: 140 mm intake manifold; air filter (category C el. lt.); asynchronous motor (manufacturer EMGR)

This REIFENHÄUSER BI Trudes 115 was manufactured in 2013. Ideal for pipe extrusion, this machine represents a robust addition to any production line. Contact us for more information.

Year of Make: 1992 Line 1 (PS, PP) Extruder screw diameter: 120/90/45mm Maximum gross plant output: 500 kg/h Film thickness range: 0.20–2.00 mm Maximum winding speed, 76 mm core 40 m/min. Maximum winding speed, 152 mm core 40 m/min. Maximum winding speed, 200 mm core 40 m/min. Available film structures: C/AAB, C/BAB, C/BAA Legend: A – Main extruder B – Co-Extruder C – Co-extruder (gloss layer) Additional function: The system is capable of winding two film webs at the same time.

Used continuous flow oil extraction lineTechnical Specifications & Performance DataThis complete olive oil processing line is engineered for continuous operation and dependable seasonal throughput. Built around continuous-cycle technology, it combines crushing, malaxing, separation, and filtration with pneumatic management to deliver stable, high-quality olive oil ready for downstream industrial packaging and bottling.Production capacity: about 20 ql/h (expandable by upgrading pumps)Line configuration: 2 continuous-cycle linesPrimary equipment: crusher with variable speed and gear pump group, malaxers (5 ql and 7 ql units), centrifuges, stone mill, filters with trays, gear pumps, water pumps, sorter with belts and hoppersCentrifuges: 2 units, 7–8 ql/h eachMalaxers: 5 units x 5 ql; 4 units x 7 qlFilters: 2 units with 4 traysStone mill: 1 unit, 7 qlControl medium: compressed air for actu ...

Used PIERALISI oil extraction plant with decanter J2Technical Specifications & Performance DataThis complete olive oil extraction line centers on a Pieralisi J2 decanter and includes upstream preparation and downstream separation for continuous processing. The configuration is engineered for farms, cooperatives, and industrial facilities seeking reliable second hand equipment to integrate upstream of bottling and industrial packaging operations. Manufactured by Pieralisi with complementary stainless steel equipment, the line supports robust operation for edible oil production.Main decanter: Pieralisi J2 decanter centrifugeHourly throughput (decanter): 25–30 ql/hSeparators: 2 centrifugal separatorsMalaxers: 3 malaxers, type SiciliaPreparatory malaxer: 1 unit, capacity 5 qlCrusher: Hammer crusherWasher: Santoro washer in stainless steelDefoliator: Leaf-removal infeed conveyorConstruction ...

Used ALFA LAVAL oil extraction plant 2000 Kg/hTechnical Specifications & Performance DataThis complete olive oil processing line combines proven Alfa Laval separation technology with robust malaxing and preparation equipment to deliver reliable, continuous extraction performance. It is a second hand, industrial processing solution designed to operate upstream of an edible oil bottling and industrial packaging system, making it a strong fit for producers who wish to integrate a used bottling line or expand their beverage production and food oil processing capacity.Hourly throughput: 20 ql/h (approx. 2,000 kg/h of olives)Core equipment: Olive elevator, hammer crusher, malaxer 1 section, malaxer 4 sections, decanter centrifuge, two disc-stack separatorsDecanter centrifuge: Alfa Laval Type LWX 207Bowl diameter (decanter): 355 mmMax solids density (decanter): 1.7 kg/dm3Max bowl speed (decante ...

Ref.nr 00925 A and Ref.Nr 00926 B Please note in the video: the gray left Esta filter system is Ref.nr. 00925 A (sold separately) Ref.nr. 00925 B Designation of the system Filter + Extraction System Manufacturer Esta Extraction Technology Model EU 562-2 Year of construction ? KW 15 kW Volt 400/690 A 28 Hz 50 IP 55 B3 2930min Housing position LG 0 Remark: Outside under power Ref.nr. 00925 A Name of the filter system For sale is an ESTA Dustex F84 filter system for the extraction of grinding, polishing and processing dust. The system is suitable for industrial workplaces and ensures a clean working environment. Manufacturer: Esta Model Dustex F 84 Year of construction ? Research found: The ESTA DUSTMAC F-84 (often referred to synonymously with the Dustex F series) is a high-performance, IFA-certified central extraction system. It is special ...

Esta Chip Suction-SB 8151 Chip Suction Powerful industrial extraction system from the quality manufacturer ESTA, model Spänesaug-SB 8151. The system is ideal for workshops for the extraction of chips and dusts (e.g. in metal or woodworking). Technical specifications of the device Manufacturer: ESTA Apparatebau GmbH & Co. KG Model / Type: Chip suction-SB 8151 Voltage (volts): 400 V Power (kW): 2.2 kW Current (amps): 4.6 A Frequency (Hz): 50 Hz Degree of protection: IP 54 (dust and splash proof) More items - new and used - can be found in our shop! International shipping costs on request!

carrying capacity: 500 kg number of suction cups: 6 suction cup dia.: 215 mm Vacuum lifter VH 6-500 for the horizontal transport of smooth, dry and airtight panels. Robust supporting structure made of steel, painted in RAL 2000 with low Own weight. consisting of: - 1x galvanized longitudinal beam with a length of 2,400 mm - 3x galvanized crossbeams with a length of 1,000 mm - 6x Springy, articulating and adjustable suction cup holders - 6x suction cups Ø 215 mm, the seal can be separated in case of wear whose metal supports can be changed inexpensively and without tools - 6x ball valves to switch off individual suction cups, thus also smaller formats can be lifted without having to move suction cups or traverses. - 1x spiral connection cable small helix: with an extension length of 3,500 mm, designed as an extension cable with CEE plug and coupling. is routed to the lifting device nex ...

carrying capacity: 1000 kg number of suction cups: 8 suction cup dia.: 280 mm Vacuum lifter VH 8-1000 for the horizontal transport of smooth, dry and airtight panels. Robust supporting structure made of steel, painted in RAL 2000 with low Own weight. consisting of: - 1x galvanized longitudinal beam with a length of 2,400 mm - 4x galvanized crossbeams with a length of 1,000 mm - 8x Springy, articulated and adjustable suction cup holders - 8x suction cups Ø 280 mm, in case of wear the seal can be separated whose metal supports can be changed inexpensively and without tools - 8x ball valves to switch off individual suction cups, thus also smaller formats can be lifted without having to move suction cups or traverses. - 1x spiral connection cable small helix: with an extension length of 3,500 mm, designed as an extension cable with CEE plug and coupling. is routed to the lifting device ne ...

condition: gut sold only together as package: ja Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 250 mm table height: 100 mm 4-jaw-chuck diameter: 200 mm weight: 60 kg dimensions of the machine ca.: 370 x 500 x 210 mm - Serial-No.: 6568 - 4-jaw chuck RÖHM Ø 200 mm - Chuck optionally with 30° pitch, or infinitely variable 360° rotation - Chuck key The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

air flow quantity: . m³/h suction power: . kPa power capacity: 16 kW The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

air flow quantity: . m³/h suction power: . kPa power capacity: . kW Extraction system The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Heat output capacity: . KW air volumen: . m³/h weight of the machine ca.: . t dimensions of the machine ca.: . m Tank size: 900x500x350 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

air flow quantity: 2500 m³/h suction power: . kPa power capacity: 1,1 kW Sweat extraction The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

air flow quantity: . m³/h suction power: . kPa power capacity: 2,2 kW Sweat extractionThe techn. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: . mm Cutting (quantity): . 0 weight: . kg Wikas Band Saw Blades 9 available Length: 5800 mm Proflex: M42 54x1.3 mm 3.4 tpi Item number: 13562-0041 20012101304 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

air flow quantity: . m³/h suction power: . kPa power capacity: 2,2 kW Sweat extractionThe techn. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.