136,793 used machines on RESALE, but how to find them? Machine Search
PLC controller, Siemens Simatic Net CP Profibus, communication processor Manufacturer: Siemens, Simatic Net CP Profibus Ovp -Type: 6GK7 342-5DA02-OXEO CP 342-5 S7-300 Profibus 12MBAUD -Number: 2x Profibus available -Price: per piece -Cardboard dimensions: 150/130/H50 mm -Weight: 0.3 kg/pc.
PLC control, connection module for digital electronic modules, terminal module, adaptation capsule -Manufacturer: Siemens, housing adaptation capsule Simatic S5 Ovp -Type: 6ES5 491-OLB11 -Number: 2x housing available -Price per piece -Cardboard dimensions: 310/215/H50 mm -Weight: 0.9 kg/pc.
CNC – controlled profile and tube bending machine for demanding and precise bending work with hollow sections and tubes. With our machines, aluminium – steel / stainless steel – various plastics such as PVC window profiles (depending on the application) can be bent with repeatable accuracy, regardless of the material. Depending on the equipment, our machines can also be used for three-dimensional bending work. Our REPANDUS models can work both horizontally and vertically. The models of the REPANDUS series work with a fixed upper roller and two movable lower rollers – this means that the straight end piece is relatively short compared to machine concepts with fixed lower rollers. The machine body is made of vibration-absorbing cast steel Shaft diameter of upper and lower rollers Ø 70 mm Shafts made of special steel – hardened and ground Bending force 190 kN Maximu ...
Fully automatic hot stamping press Oropress Mechanical eccentric press with lift table Lift table as pneumatic sliding table 250 x 250 mm Fully automatic sequence, optionally triggered with foot switch for single stroke Heated press punch 120 x 200 mm up to 250 °C Safety grille Film Feed Unit Built in 1986
CNC – controlled profile and tube bending machine for demanding and precise bending work with hollow sections and tubes. With our machines, aluminium – steel / stainless steel – various plastics such as PVC window profiles (depending on the application) can be bent with repeatable accuracy, regardless of the material. Depending on the equipment, our machines can also be used for three-dimensional bending work. Our REPANDUS models can work both horizontally and vertically. The models of the REPANDUS series work with a fixed upper roller and two movable lower rollers – this means that the straight end piece is relatively short compared to machine concepts with fixed lower rollers. The machine body is made of vibration-absorbing cast steel Shaft diameter of upper and lower rollers Ø 70 mm Shafts made of special steel – hardened and ground Bending force 190 kN Maximu ...
Key data: 3020 mm, 6 mm, 750 mm
Combined CNC – controlled press brake / sheet metal shears Super compact machine with a very small footprint. Maximum cutting length 3,020 mm Nominal cutting capacity 6 mm sheet steel/ST 40 Cutting angle 1°30" 17 pieces of sheet metal hold-down, Ø hold-down plate 50 mm NC – controlled back gauge for guillotine shear station - adjustment range 750 mm Table height 750 mm. Maximum bending length between the side stands: 3,440 mm (column passage 3,550 mm) Maximum pressing force 1,000 kN Working height bending only 1,230 mm Lifting range bending station 170 mm Maximum installation height of the bending station is 250 mm (press beam surface in the lowest position), the backgauge adjustment range for the bending station is 750 mm. Dimensions including operating pendulum 4.25 m x 1.82 m x H 2.8 m Footprint 3.85 x 1.82 m Drive power 10 kW Weight 9,000 kg Equipment: ...
Keyboard, control panel, industrial, PLC workstation, programming device, handheld programming device, prommer -Manufacturer: Siemens, Simatic S5 programming device Prommer -Type: 6ES5 695-OAA11 -Voltage: 230/115V -Dimensions cardboard: 260/190/H80 mm -Total weight: 2.2 kg
Combined CNC – controlled press brake / sheet metal shears Super compact machine with a very small footprint. Maximum cutting length 3,020 mm Nominal cutting capacity 6 mm sheet steel/ST 40 Cutting angle 1°30" 17 pieces of sheet metal hold-down, Ø hold-down plate 50 mm NC – controlled back gauge for guillotine shear station - adjustment range 750 mm Table height 750 mm. Maximum bending length between the side stands: 3,440 mm (column passage 3,550 mm) Maximum pressing force 1,000 kN Working height bending only 1,230 mm Lifting range bending station 170 mm Maximum installation height of the bending station is 250 mm (press beam surface in the lowest position), the backgauge adjustment range for the bending station is 750 mm. Dimensions including operating pendulum 4.25 m x 1.82 m x H 2.8 m Footprint 3.85 x 1.82 m Drive power 10 kW Weight 9,000 kg Equipment: ...
Mains choke, mains filter, frequency converter, frequency converter, drive converter, Line Filter. Smart Line Module -Manufacturer: Siemens, mains choke line filter for 10kW -Type: MLFB 6SL3000-OHE21-OAAO -Voltage: 3AC 380-480V, 47-63Hz, 24A -Dimensions: 265/60/H120 mm -Weight: 2.3 kg
Key data: 100 t, 3440 mm, 3550 mm
Combined CNC – controlled press brake / sheet metal shears Super compact machine with a very small footprint. Maximum cutting length 3,020 mm Nominal cutting capacity 6 mm sheet steel/ST 40 Cutting angle 1°30" 17 pieces of sheet metal hold-down, Ø hold-down plate 50 mm NC – controlled back gauge for guillotine shear station - adjustment range 750 mm Table height 750 mm. Maximum bending length between the side stands: 3,440 mm (column passage 3,550 mm) Maximum pressing force 1,000 kN Working height bending only 1,230 mm Lifting range bending station 170 mm Maximum installation height of the bending station is 250 mm (press beam surface in the lowest position), the backgauge adjustment range for the bending station is 750 mm. Dimensions including operating pendulum 4.25 m x 1.82 m x H 2.8 m Footprint 3.85 x 1.82 m Drive power 10 kW Weight 9,000 kg Equipment: ...
PLC control, Siemens Simatic Net CP Profibus, communication processor -Manufacturer: Siemens, Profibus SpliTConnect Tap Ovp -Type: 6GK1905.OAAOO 832 689-200 -Number: 9x Connect Tap available -Price per piece -Dimensions cardboard: 160/110/H55 mm -Weight: 0.2 kg/pc.
Key data: 300 mm, 450 mm
Control OKUMA ... OSP-P300LA-e Turning diameter ... 300mm Rotation length... 450mm Inclined bed Spindle bore ... 68mm Driven tools 12 Axis X ... 235mm Axis Z ... 520mm Axis C ... 360° Machine weight... 5000kg L x W x H ... 2545x1870x1791mm Main engine power ... 11/15kW Bar feeder Spindle speed ... 38-3800 rpm The machine is in good condition, possible to test under electricity.
PLC control, digital input, digital input -Manufacturer: Siemens, Simatic S7 digital input ovp -Type: 6ES7 321-1HB02-OAAO -Number: 2x module available -Price per piece -Cardboard dimensions: 150/130/H45 mm -Weight: 0.2 kg/pc
SPS control, communications processor Simatic S7 -Manufacturer: Siemens, Simatic S7 communication processor ovp -Type: 6ES7 340-1BH02-OAEO -Cardboard dimensions: 150/130/H50 mm -Weight: 0.3 kg
Coupling module, industrial Ethernet switch, network switch, Lan switch, coupler, DP/DP coupler -Manufacturer: Siemens, Simatic S7 coupler DP/DP coupling orig Type: 6ES7 158-OAD01-OXAO -Cardboard dimensions: 150/130/H45 mm -Weight: 0.3 kg
PLC control, digital output, digital output -Manufacturer: Siemens, Simatic S7 digital output -Type: 6ES7 322-1BH01-OAAO -Number: 6x module available -Price per piece -Dimensions: 115/40/H125 mm -Weight: 0.2 kg/pc
PLC control, digital input -Manufacturer: Siemens, Simatic S7 digital input -Type: 6ES7 321-1BL00-OAAO -Number: 2 modules available -Price: per piece -Cardboard dimensions: 115/40/H125 mm -Weight: 0.4 kg/pc
PLC control, digital input, digital input -Manufacturer: Siemens, Simatic S7 digital input -Type: 6ES7 321-1BH10-OAAO -Number: 1x module available -Price per piece -Cardboard dimensions: 115/40/H125 mm -Weight: 0.2 kg/pc
PLC control, PLC subrack, Connection cable -Manufacturer: Siemens, Simatic S5 connection cable Ovp -Type: 6ES5 713-OBB20 Simatic S5-110 -Length: 1200mm -Number: 2x cables available -Price per piece -Dimensions cardboard: 95/80/H60 mm -Weight: 0.1 kg/pc.
PLC controller, PLC subrack, connecting cables -Manufacturer: Siemens, Simatic S5 connection cable, original packaging -Type: 6ES5 713-OAD20 Simatic S5-110 F -Length: 320 mm -Carton dimensions: 95/80/H60 mm -Weight: 0.1 kg
Control card, output card, controller, memory module, PLC controller, expansion module, interface module, memory card, -Manufacturer: Siemens Simatic S7 Memory Card -Type: 6ES7 952-1AHOO-OAAO -Dimensions: 120/70/H30 mm -Weight: 0.1 kg
Key data: 3000 W, 1500 , 3000
Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-OT-6022 3kW / VF1530-3000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 60000mm/min - Maximum acceleration: 0.7G - Maximum load: 1200kg - Nominal power: 3.0kW - Energy requirements: 24.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 20.0mm, maximum thickness 22.0mm - Stainless steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Aluminum: Recommended thickness 6.0mm, maximum thickness 8.0mm - Brass: recommended thickness 5.0mm, maximum thickness 6.0mm Structure parts ...
Control card, output card, controller, memory module, PLC controller, expansion module, interface module, memory card, -Manufacturer: Siemens Simatic S7 Memory Card -Type: 6ES7 951-OKGOO-OAAO -Dimensions: 120/70/H30 mm -Weight: 0.1 kg
PLC controller, connection module for digital electronic modules, terminal module -Manufacturer: Siemens, Terminal Modules Simatic ET 200S -Type: 6ES7 193-4CB30-OAAO -Cardboard dimensions: 140/45/H25 mm -Weight: 0.1 kg
PLC controller, connection module for digital electronic modules, terminal module -Manufacturer: Siemens, Terminal Modules Simatic ET 200S -Type: 6ES7 193-4CC30-OAAO -Quantity: 4 modules available -Price: per piece -Dimensions: 140/40/H25 mm -Weight: 0.1 kg/pc.
PLC control, connection module for digital electronic modules, terminal module -Manufacturer: Siemens, terminating module Simatic ET 200S -Type: 6ES7 193-4JAOO-OAAO -Number: 7x module available -Price per piece -Cardboard dimensions: 140/40/H25 mm -Weight: 0.1 kg
Many of our machines are available from stock. Call and ask to find out more. Handheld laser welder LWH-2000-N RayTools The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics or Raycus - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 2000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 3x400 Hz - Dimensions (including cable rack) 630x1300x1500mm Price included One-day training along with machine installation - 1 day up to 8 hours – machine installation and operational training. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work fr ...
PLC control, connection module for digital electronic modules, terminal module -Manufacturer: Siemens, Terminal Modules Simatic ET 200S -Type: 6ES7 193-4CG30-OAAO -Cardboard dimensions: 135/45/H40 mm -Weight: 0.1 kg
Many of our machines are available from stock. Call and ask to find out more. Handheld laser welder LWH-3000-N RayTools The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics or Raycus - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 3000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 3x400 Hz - Dimensions (including cable rack) 630x1300x1500mm Price included One-day training along with machine installation - 1 day up to 8 hours – machine installation and operational training. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work fr ...
Many of our machines are available from stock. Call and ask to find out more. Handheld laser welder LWH-1000-N QiLin The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 1000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 230 Hz - Dimensions (including cable rack) 630x1300x1500mm Price included One-day training along with machine installation - 1 day up to 8 hours – machine installation and operational training. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work freely at multipl ...
PLC controller, connection module for digital electronic modules, terminal module, terminal block -Manufacturer: Siemens, Terminal Module -Type: 6ES7 193-OCB30-OXAO -Number: 3 modules available -Price: per piece -Dimensions: 235/130/H55 mm -Weight: 0.4 kg/pc.
PLC controller, central assembly, working memory, CPU, central unit, central processing unit, compact unit -Manufacturer: Siemens, Simatic S7 compact device -Type: 6ES7 215-2AD00-OXBO -Quantity: 1 module available -Price: per piece -Dimensions: 230/65/H85 mm -Weight: 0.5 kg/pc.
Many of our machines are available from stock. Call and ask to find out more. Hydraulic press brake PBO-4016-CNC OT-41 Specifications - Nominal pressure: 1600 kN - Max working length 4000 mm - Throat depth: 320 mm - Max stroke: 180 mm - Daylight: 455 mm - Distance between side frames: 3200 mm - Max backgauge distance: 600 mm - Nominal motor power: 15.0 kW - Length: 4100 mm - Width: 1650 mm - Height: 2600 mm - Weight: 10800.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Otinus CNC controller OT-41 The Otinus CNC controller features a convenient and intuitive menu. The software calculates the bending angle itself. The large colour touch screen is easy to read from any angle. Optional extr ...
Power supply unit, power converter, power supply, switching power supply, DIN rail power supply -Manufacturer: Siemens, Simatic S7 Power Supply -Type: 6ES7 307-1EAOO-OAAO -Number: 2x power supply units available -Price: per piece -Dimensions: 115/80/H125 mm -Weight: 0.6 kg/pc.
PLC control, central module, main memory, CPU, central device, central processing unit, compact device, compact CPU -Manufacturer: Siemens, compact CPU Simatic S7-300 -Type: 6ES7 313-5BF03-OABO -Number: 1x module available -Price per piece -Dimensions: 120/115/H125 mm -Weight: 0.8 kg/pc.
Many of our machines are available from stock. Call and ask to find out more. Hydraulic press brake PBE-1204-CNC STEP ROCK22+ Specifications - Max working thickness (S235): up to 3.0 mm - Nominal pressure: 400 kN - Max working length 1250 mm - Throat depth: 300 mm - Max stroke: 210 mm - Daylight: 410 mm - Distance between side frames: 2600 mm - Max backgauge distance: 750 mm - Nominal motor power: 2.0 kW - Length: 1960 mm - Width: 1450 mm - Height: 2610 mm - Weight: 4000.0 kg Tools - Automatic backgauges on linear guides driven by servo: 2 pcs - Front supports: 2 pcs - Backgauge distance regulation (X-axis): electric motor - Ram control (Y-axis): electric motor - Type of punch holder: AMADA quick-action clamping Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinu ...
Hydraulically driven diamond wire sawing machine. - Vertical wire sawing machine, combined with a swivel arm, for sawing various stone materials such as granite, marble, basalt, as well as concrete and artificial stone by means of a diamond rope. The machine is suitable for hand-held straight cuts, for hand-held cutting of circles with the circular cutting device and for hand-held cutting of free contours with the copying device. With the optional arc cutting device, semi-circular workpieces can be sawn fully automatically from a block of stone (a sheet template is required for each radius). With the optional saw frame tilting device, bevel cuts of up to 45° can also be made. Maximum cutting width in the projection of the machine 490 mm The maximum workpiece height that can be sawn with the machine is a maximum of 550 mm, depending on the material to be sawn. Swivel arm to ...
Many of our machines are available from stock. Call and ask to find out more. Hydraulic press brake PBO-3117-CNC Delem DA-69T Specifications - Nominal pressure: 1750 kN - Max working length 3100 mm - Throat depth: 510 mm - Max stroke: 410 mm - Daylight: 615 mm - Distance between side frames: 2600 mm - Max backgauge distance: 600 mm - Nominal motor power: 15.0 kW - Length: 3300 mm - Width: 1650 mm - Height: 3400 mm - Weight: 10300.0 kg Tools - Automatic backgauges on linear guides driven by servo: 2 pcs - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): independent control of Y1 and Y2 axes by servo drive - Type of punch holder: AMADA quick-action clamping Delem DA-69T controller - Touch screen module for graphical programming in 2D and 3D - 3D visualisation for simulation and processing - 17″ high-resoluti ...
PLC control, central module, main memory, CPU, central device, central processing unit, compact device, compact CPU -Manufacturer: Siemens, Simatic S7-200 CPU 222 compact device -Type: 6ES7 212-1AB22-OXBO -Number: 1x module available -Price per piece -Dimensions: 90/60/H95 mm -Weight: 0.2 kg/pc.
PLC control, digital input, digital input, electronic module, digital input module -Manufacturer: Siemens, Simatic ET 200SP digital input module -Type: 6ES7 131-5RDOO-OABO -Number: 1x module available -Price per piece -Dimensions: 80/30/H90 mm -Weight: 0.1 kg/pc
Many of our machines are available from stock. Call and ask to find out more. Hydraulic press brake PBO-3117-CNC Delem DA-66T Specifications - Nominal pressure: 1750 kN - Max working length 3100 mm - Throat depth: 410 mm - Max stroke: 310 mm - Daylight: 465 mm - Distance between side frames: 2600 mm - Max backgauge distance: 1000 mm - Nominal motor power: 15.0 kW - Length: 3300 mm - Width: 1650 mm - Height: 2975 mm - Weight: 8850.0 kg Tools - Automatic backgauges on linear guides driven by servo: 2 pcs - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): independent control of Y1 and Y2 axes by servo drive - Type of punch holder: AMADA quick-action clamping Delem DA-66T controller - by automatically controlling 8 axes, bending is more efficient - can store 500 programmes consisting of 25 steps and 99 repetition ...
PLC control, digital input, digital module -Manufacturer: Siemens, Simatic S7-300 digital module SM 323 -Type: 6ES7 323-1BH01-OAAO -Quantity: 1 module available -Cardboard dimensions: 115/40/H125 mm -Weight: 0.3 kg
Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-T-6012 1,5kW Specifications - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum acceleration: 0.0G - Nominal power: 1.5kW - Energy requirements: 24.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Structure parts The machine is very stable thanks to its welded construction based on massive legs. The high speed of head movements while maintaining high precision is ensured by Japanese Fuji servo motors. ABLS - automatically replenishes grease in guides. RayTools cutting head with autofocus Optional extra - Otinus Protect to guarantee your peace of mind This product ensures protection for the source of ...
PLC control, digital output, digital output -Manufacturer: Siemens, Simatic S7 digital output -Type: 6ES7 322-1HH01-OAAO -Number: 1x module available -Price per piece -Dimensions: 115/40/H125 mm -Weight: 0.3 kg/pc
Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-T-6022 3kW Specifications - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum acceleration: 0.0G - Nominal power: 3.0kW - Energy requirements: 24.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 20.0mm, maximum thickness 22.0mm - Stainless steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Aluminum: Recommended thickness 6.0mm, maximum thickness 8.0mm - Brass: recommended thickness 5.0mm, maximum thickness 6.0mm Structure parts The machine is very stable thanks to its welded construction based on massive legs. The high speed of head mov ...
PLC control, connection module for digital electronic modules, terminal module -Manufacturer: Siemens, Terminal Modules Simatic ET 200S -Type: 6ES7 193-4CA40-OAAO -Number: 24 modules available -Price per piece -Minimum order quantity: 5 pcs -Dimensions: 155/15/H45 mm -Weight: 0.1 kg/pc.
Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-T-6035 3kW Specifications - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum acceleration: 0.0G - Nominal power: 3.0kW - Energy requirements: 24.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 20.0mm, maximum thickness 22.0mm - Stainless steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Aluminum: Recommended thickness 6.0mm, maximum thickness 8.0mm - Brass: recommended thickness 5.0mm, maximum thickness 6.0mm Structure parts The machine is very stable thanks to its welded construction based on massive legs. The high speed of head mov ...
PLC controller, connection module for digital electronic modules, terminal module -Manufacturer: Siemens, Terminal Modules Simatic ET 200S -Type: 6ES7 193-4CA30-OAAO -Number: 15 modules available -Price: per piece -Minimum order quantity: 5 pieces -Dimensions: 130/15/H45 mm -Weight: 0.1 kg/pc.
Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-TA-6022 3kW Specifications - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum acceleration: 0.0G - Nominal power: 3.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Structure parts The machine is very stable thanks to its welded construction based on massive legs. The high speed of head movements while maintaining high precision is ensured by Japanese Fuji servo motors. ABLS - automatically replenishes grease in guides. RayTools cutting head with autofocus Optional extra - Otinus Protect to guarantee your peace of mind This product ensures protection for the source of your laser. With this service yo ...
PLC control, connection module for digital electronic modules, terminal module -Manufacturer: Siemens, Terminal Modules Simatic ET 200S 2 pieces -Type: 6ES7 193-4CA20-OAAO -Price/delivery: complete -Dimensions each: 130/15/H45 mm -Weight: 0.1 kg/pc.
maximum number of results exceeded
please refine your search
