ex cell o used for sale

table length: 3000 mm table width: 1500 mm table height: 200 mm bore: 28 mm weight: 1425 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TECHNICAL SPECIFICATIONS – BASIC UNITSystem footprint: 12.3 sq m Length: 3.5 m Width: 3.5 m Height: 3.0 m Total weight including dielectric fluid: 6,500 kg Connected load (45/90 A generator): approx. 6 / 9 kVA Supply voltage: 380 V Connection: RST/MP/S Fuse rating (45/90 A generator): 25 / 35 A Operating current corresponding to the generator: 45 / 90 AWORKPIECE AND ELECTRODEPermissible workpiece dimensions: 900 × 900 mm Workpiece clamping surface: 900 × 900 mm Max. table load: 1,000 kg Max. electrode weight with pneumatic clamp: 100 kg Max. electrode weight directly on the quill: 250 kg Min. distance table – electrode holder: 220 mm Max. distance table – electrode holder: 620 mmWORKING TANKMirror height from table: 450 mm Internal width: 900 mm Internal length: 900 mm Max. capacity: 415 lCLAMPING PLATELength: 900 mm Width: 900 mm Threaded hole size: M10 Threaded hole spacing: 1 ...

MAKRA EXA 160 Height Measuring Instrument Manufacturer MAKRA Model EXA 160 Condition untested Location 63843 Niedernberg DE Lot 83

bore capacity in steel (diameter):63 mm arm length:2000 mm workpiece height max.:135 mm spindle stroke:400 mm reus:16 Stufen table-size:630 x 800 mm tool taper:MK 5 speeds:20 - 1600 U/min spindle feeds::0,04- 32 mm/U work table::800 x 630 x 550 mm total power requirement:5,5 kW weight of the machine ca.:6200 kg dimensions of the machine ca.:3100 x 1250 x 2500 mm Year:ca. 1990

bore capacity in steel (diameter):63 mm arm length:2000 mm workpiece height max.:135 mm spindle stroke:400 mm reus:16 Stufen table-size:630 x 800 mm tool taper:MK 5 speeds:20 - 1600 U/min spindle feeds::0,04- 32 mm/U work table::800 x 630 x 550 mm total power requirement:5,5 kW weight of the machine ca.:6200 kg dimensions of the machine ca.:3100 x 1250 x 2500 mm Year:ca. 1990

pressure:150 t distance between columns:300 mm stroke:180 mm distance table/ram, max. stroke up, adjustment up:300 mm table surface area:570x180 / 300x410 mm table height over floor:875 mm side window:180 mm ram surface:180 mm speed down:250 mm/s speed up:160 mm/s working speed:6 - 12 mm/s oil volume:250 l power requirement:11,0 kW weight:2,4 t dimensions (WxDxH):1,3 x 1,3 x 2,4 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 § 20 foundation pit:nicht erforderlich

pressure:40 t distance between columns:495 mm stroke:150 mm distance table/ram, max. stroke up, adjustment up:300 mm table surface area:490 x 400 mm hole in the table:50 mm table height over floor:950 mm side window:155 mm ram surface:150 mm speed down:480 mm/s speed up:480 mm/s working speed:20 mm/s oil volume:115 l power requirement:7,5 kW weight:2,2 t dimensions (WxDxH):1,35 x 1,1 x 2,2 m depth stop:mechanisch foundation pit:nicht erforderlich

pressure:40 t distance between columns:500 mm stroke:150 mm distance table/ram, max. stroke up, adjustment up:300 mm table surface area:480 x 400 mm hole in the table:50 mm table height over floor:950 mm side window:150 mm ram surface:150 mm speed down:480 mm/s speed up:480 mm/s working speed:20 mm/s oil volume:160 l power requirement:7,5 kW weight:2,6 t dimensions (WxDxH):1,1 x 1,4 x 2,4 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 light guard:Sick depth stop:mechanical foundation pit:not necessary

pressure:125 t throat:340 mm stroke:20 - 160 mm no. of strokes:55 /min distance table/ram, max. stroke up, adjustment up:480 mm table surface area:1000 x 660 mm table height over floor:730 mm ram surface:600 x 300 mm ram adjustment:75 mm power requirement:8,5 kW weight:7,8 t dimensions (WxDxH):1,4 x 2,8 x 2,7 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic overload protection in ram:mechanical

pressure:035 t throat:240 mm stroke:4 - 70 mm no. of strokes:120 /min distance table/ram, max. stroke up, adjustment up:400 mm table surface area:580 x 440 mm hole in the table:200 x 170 mm table height over floor:670 - 820 mm table adjustable:150 mm ram surface:300 x 175 mm ram adjustment:50 mm power requirement:3,0 kW weight:2,3 t dimensions (WxDxH):1,2 x 1,4 x 2,1 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch-/ brake combination:hydraulic overload protection in ram:mechanical

approx. 23 pieces OTTO dangerous goods container, 600L, large container "IBC" – used -: Price per piece from location: 395.- € (net)! Manufacturer: Otto Containersysteme GmbH Type: 11A/X/01/99/D/OTTO/BAM 0356/2556/1090 Manufacturer Part Number: 33782 Year of Make: 1999 Capacity: 600L Tank material: St. W 24 Maximum permissible gross weight: 1.090kg Net weight: 190kg with approval as a large container "IBC" for the national (GGVS/GGVE/GGVS and international (ADR/RID/IMDG code) transport of dangerous goods of packaging groups I, II + III (X-coding) Dimensions according to DIN 30741 Tank made of steel, hot-dip galvanized with hinged, lockable lid Lid locks in place by special spring technology up to approx. 70° at any opening angle Container all around with only 2 closures on the front with forklift pockets, safety hook for PE bags, nameplate and bag Conditio ...

Year 2014 - twin orbital grinding/polishing pads. with extraction & filtration

Gas and oil burners, oil burner filters, heating oil filters, filter and deaerator units, heating oil deaerators -Manufacturer: oilon, filter and vent unit unused, original packaging -Type: Oilon Plus -Technical data: see photo of the nameplate -Cardboard dimensions: 370/180/H150 mm -Weight: 1.8 kg

General SKU050A271 MakeD.O.S. Dutch Oven Systems Year of construction1995 LocationBarneveld Main Features MaterialMild steel Volume2500 Ltr. Specified Features - Drying oven Drying ovencheck Number of compartments:1 Capacity2500 Ltr. Internal width1050 mm Internal depth1450 mm Internal height1750 mm Gas heatingcheck Number of doors:1 With fancheck Motor2,2 KW MaterialMild steel General With switchgear(as is) Floorspace2,0 x 2,2 m Total height3,2 m Weight1500 kg CEcheck Extra Specifications- Burner make Weishaupt, type WG-10N/1A (10-42 KW)Consumer wastePaints & coatingsDrying ovensFine chemicalsOther chemicalRubberAgrochemicalsPlastic & polymersCatalysts & fillersOrganicsPaper & otherDiscountCosmeticsE-waste & metalDyes & pigmentsAPIPlastic & rubberMinerals & inorganicDutch Oven SystIndustries > Recycling > Consumer wasteIndustries > Chemical > Paints & coatings ...

WE OFFER AN NICE CONDITION TWIN ROBOTI WELDING CELL YEAR 2012, MACHINE WAS USED IN PRODUCTION FROM 2012 TO 2019 MACHINE WE CAN PUT FOR CUSTOMER ON GROUND, START UP AND MADE AN OPERATORS TRAINING POSITIONER IS HORIZONTAL TURNING: SEE VIDEO LENGHT OF POSITIONER: 4 METERS MAX LOAD PER SIDE PALET 750KG ROBOTS 2X OTC MODEL: NV61-NEFN ROBOTS CONTROL: AX-21 CV0000 WELDING MACHINES 2X FRONIUS CMT TOOLINGS PALET CAN BE CHANGING WE CAN OFFER ALSO TOLINGS FOR THE CUSTOMER PRODUCT :

Inv. Num. : 7724 Type: FD-V8L/FD11 Producer: OTC Created: 2019 Parameters: Accessories: Measurement Wire cutting and grinding Rotary and tilting table Head cleaning station

A complete laser processing and marking system SIC-Marking is available. Stations: 3, table type: vacuum clamping table, processing area per station X/Y: 1000mm/1600mm, laser wavelength: 10600nm/1064nm, processes: evaporation/cleaning/structuring/surface processing, overall system dimensions X/Y/Z: approx. 25000mm/3000mm/3000mm, operating hours: approx. 2000h. Station 1: laser type: Synrad CO2 laser, number of lasers: 6, laser power: 100W, pulse frequency range: 0kHz-100kHz, power density: 250kW/cm², processed materials: polyamide/PVB/PET, processes: melting/evaporation. Station 2: laser type: IPG fiber laser, number of lasers: 6, laser power: 250W, pulse frequency range: 20kHz-500kHz, power density: 250MW/cm², processed materials: copper/aluminum/tin/lead/iron, processes: structuring/melting/evaporation. Station 3: laser type: IPG fiber laser, number of lasers: 3, laser power: 300W, p ...

Extraction AD-Oracle from Bofa - new : with start/stop via external 24V optional: in stainless steel, , hose set, VOC, filter change signal - the compact device offers many areas of application - the filters used are characterized by a long service life - the two filter cassettes separate dust, fine dusts and gases - the air flow is 380 m³/h - the dimensions are 980 mm x 430 mm x 430 mm (HxWxD) Typical applications : Marking laser Engraving laser Cutting lasers Welding laser Soldering and welding smoke

Suction AD-Oracle IQ from Bofa - New : The IQ control keeps the set air flow the same during runtime. Optional: In stainless steel, , hose set, VOC, filter change signal, start/ stop via external 24V - the compact device offers many areas of application - the filters used are characterized by a long service life - the two filter cassettes separate dust, fine dust and gases - the air flow is 380 m³/h - the dimensions are 980 mm x 430 mm x 430 mm (HxWxD) - Weight 68 kg - Noise level less than 60 dBA Options: - Suction hose in the necessary length - Connection sleeves - various suction nozzles Typical applications : Marking laser Engraving laser Cutting lasers Welding laser Soldering and welding fumes

Belts - oil separators Oil separator with KUNSTSTOFFGURT OPV - 1 / OPV - 2 This group of oil separators is recommended for industrial applications. The collection in the standard version is made of plastic without connecting traces, which is adapted to the requirements, e.g. polymer, elastomer, etc. All parameters such as performance, bandwidth, and so on are selected individually. An oil lifting height of up to 15 m is particularly useful in deep tanks, e.g. sewage treatment plants. The number after the marking (300/500/700/1000 mm) is the working length of the strip - depth from the mounting base. Complete oil separator with PU polyurethane tape. Belt color: green (standard), blue or white. Maximum liquid temperature up to 60°C. We have oil separators with a stainless steel belt INOX with a working temperature of up to 100 ° C at an additional cost. Maximum liquid temperature ...

Öfen für die Wärmebehandlung Metalle einfache Härtesysteme Härterei-Zubehör Glühöfen Umluftöfen zum Glühen, Anlassen Salzbadöfen Schutzgasöfen Nitrieröfen und Plasmanitrieröfen Mehrzweckkammer-ofenanlagen kontinuierliche Ofenanlagen Vakuumprozesse Vakuumhärten Vakuumglühen, -anlassen, Nitrieren Vakuumlöten Metal Injection Moulding Induktionserwärmung Öfen für die Kunststofftechnik zum Trocken, Tempern, Polymerisieren, Einbrennen usw.; Ausführung als Kammeröfen, Haubenöfen, Herdwagenöfen, Schachtöfen; Herdwagen-Schmiedeöfen Umluftöfen Kammerofenlinien Nitrieröfen Plasmanitrieröfen Vakuumprozesse Schmelzöfen Trocknen Tempern Laboröfen Ersatzteile Öfen Kammeröfen Herd wagenöfen Herdwagenöfen Glühen Härten Tempern Umformen Vorwärmen Schmieden Thermisches Reinigen Vakuumtechnik Pyrolyse Löten Öfen INDUSTRIEOFENBAU Kammeröfen Rollenherd Hubbal ...

Tube bundle heat exchangers Manufacturer: Orsymonde France Type: Tube bundle Year of construction: 2000 Serial number: 1.00.098 Carrier: Medium: Water Material: 1.4404 (V4A) Operating pressure: 3 bar Temperature: ambient temperature Test pressure: 6 bar Coat: Medium: Gas Material: 1.4404 (V4A) Operating pressure: 0.5 bar Temperature: ambient temperature Test pressure: 1 bar Dimensions: Length: 2.070 mm Width: 1.070 mm In very good condition!

Material: PVC / Details: DC motor 70 kW, degassing, counter-runner, vacuum pump, screw diameter 88-151 mm (conical) Throughput: approx. 300 - 400 KG/hr.

Hollow-chamber plate system Material: PC, PP Extruder: Breyer Screw diameter: 120 mm, L/D: 33 Engine: 200 kW with degassing, Siemens "Simatic OP17" PLC control, vacuum station with water ring pump and condensate pots, sieve changer Gneuß SF75, melt pump Maag 56/56, calibrator OMIPA 2400 mm, 10-fold multi-roll extractor OMIPA, 2 roll extractor OMIPA, protective film laminating station, hot-knife longitudinal separation, OMIPA cross saw 2400 mm R

Attachment for an excavator Stone barrel, concrete cutter, surface milling machine, drum barrel, attachment cutter, cross-cutting head cutter used O&K Orenstein and Koppel SN1487569 940963 211.22.25.42 Cutter diameter s. 670 mm Width: approx. 1300 mm Tool holder approx. 30 mm Ambauschild approx. 700 x 570 mm Hole size approx. 580 x 420 mm Bore approx. 275 mm Total dimensions: 1400 x 1300 x 670 mm Subject to changes and errors in technical data, information and prices as well as intermediate sale

PLC control -Type: Simatic S7 6ES7 321-1BL00-OAAO -Number: 39 x available -Price: per piece -Weight: 0.4 kg

PLC control -Type: Simatic S7-300 -Digital output: SM 322, -Potential green, 32DA, DC24V, 0.5A, -1 X 40 PIN., -Total current: 4A/group -Number: 13x available -Price: per piece -Weight: 0.4 kg

Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, welding fume filter, welding fume extraction, flue gas extraction fan, extraction filter system -Manufacturer:Oelde, extraction system, extraction filter system, type size 16 -Air flow: 22 m³/min -Engine: 1.85 kW -Speed: 2890 rpm -Individual components/technical data: see photos -Dimensions: 870/480/H1250 mm -Weight: 100 kg

Radial fan, high pressure radial fan, dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, extraction fan, fan, pressure fan, vacuum fan, ventilation fan, fan, radial fan -Manufacturer: ebm, radial fan extraction fan -Type: 2CF2062-OEA -Engine power: 0.18 kW / 2740 rpm -Connection input: Ø 62 mm -Connection output: Ø 63 mm -Fan wheel: Ø 240 x 30 mm -Protection class: IP 54 -Dimensions: 340/300/H355mm -Weight: 8.8 kg

Single screw extruder manufactured in 1986. This PREALPINA Prealpina 105 × 30D features a screw diameter of 105 mm and an output capacity of up to 300 kg/h. It is designed for processing various post-consumer plastics, including PE and PP. The machine includes essential components such as a gravimetric dosing. If you are looking to get high-quality plastic recycling capabilities, consider the PREALPINA Prealpina 105 machine we have for sale. Contact us for further details.

Year of Make: 1992 Line 1 (PS, PP) Extruder screw diameter: 120/90/45mm Maximum gross plant output: 500 kg/h Film thickness range: 0.20–2.00 mm Maximum winding speed, 76 mm core 40 m/min. Maximum winding speed, 152 mm core 40 m/min. Maximum winding speed, 200 mm core 40 m/min. Available film structures: C/AAB, C/BAB, C/BAA Legend: A – Main extruder B – Co-Extruder C – Co-extruder (gloss layer) Additional function: The system is capable of winding two film webs at the same time.

Heat output capacity: . KW air volumen: . m³/h weight of the machine ca.: . t dimensions of the machine ca.: . m Tank size: 900x500x350 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Omipa Year of Construction: 1992 Model / Type: Omipa 120/90/45 Type of Machine: Extrusion Line Find more here - .ucymachines/ Contact us at - sales@ucymachines

Swing over table 330 mm Distance between centres 650 mm Maximum grinding diameter 200 mm Maximum workpiece weight 50 kg Grinding Wheel 610 × 75 mm Wheel spindle motor 7.5 kW / 10 HP X-axis travel 320 mm Z-axis travel 650 mm Workhead and tailstock taper MT4 Machine weight 5,400 kg

Holtrop Jansma-AFS vacuum filtering plant 21.000m3/h with 2 cascade installed exhausters, waste disposal starwheel closure, screw conveyor, transport exhauster, air-recovery system, air-pressure cleaning, etc. Manufacturer: Holtrop Jansma – AFS Type: OSFS 185 Year: 2005 – 2015 M-Nr.: Vacuum filtering plant: Diameter dust extraction pipe: ø700 mm + ø700 mm Length: 3.500 mm Width: 2.300 mm Nett working height: 6.200 mm Capaciteit: 21.000 cbm /hour Power: 2 15 kW, 380V, 56 Amp, 10.500 m3/uur, 3.000 tpm, 3.850 Pa, Typ: RL E 550130 Filter surface: 185 sqm Filter sleeves: 150 pcs Length filtering sleeves: 2.200 mm Diameter filtering sleeves: 180 mm Cleaning: Compressed air cleaning Fire safety precaution: Sprinklers – pipe with connection fire fighting Screw conveyor: HJ STH-380 12 tpm Starwheel closure: HJ ZRS-300, 31 tpm Dimensions closure: 250350 mm Transport ventilator: Diameter D ...

The oil separator is used to collect oil floating on the surface. It is used wherever there is little working space and fluids must be moved and de-oiled in different places. It is a lightweight, compact portable device that is mounted on the wall of the in which the liquid to be cleaned is located. Thanks to this, it is possible to develop various technological active ingredients in de-oiled in different places. The device is designed for continuous operation. The disc is made of self-adhesive plastic, on which oil and carbohydrates, but water does not. Maximum liquid temperature up to 60 ° C - standard band. Maximum motor and housing temperature up to 40°C. Avoid mounting places with aggressive pH - additional motor protection required. With the OTV-300, you should take a 15-minute break every 3 hours. If the motor does not overheat, it can work longer. Continuous opera ...

The OE750 spark spectrometer and the new OE720 are metal analyzers with new, groundbreaking performance features. With them, you can analyze all elements found in metals at low detection limits and with state-of-the-art multi-CMOS technology. Ever stricter requirements, complex supply chains and the increasing use of scrap as a base material are forcing foundries and the metalworking industry to reliably detect the lowest ppm values of traces and accompanying elements. Until now, spark spectrometers in these power ranges have been unwrive for many. With the OE series, this has now changed fundamentally. Hitachi OE spark spectrometers analyze all essential alloying elements and extremely low levels of trace, accompanying and treatment elements in metals, e.B nitrogen in steel. The OE750 also covers rare applications such as oxygen in copper and oxygen, nitrogen and hydrogen in titan ...

AUTOMATIC CUTTING SAW machine for solid wood model OMEC TA 185 second hand machine working conditions : Excellent CE mark : YES Instruction Book : YES with rollers tracks ( as in photo ) n.03 pneumatic stop with blade diam.mm.550 motor power Hp 7,5 volt. 380/50

Nominal Rating 1000 l/h; prepared - top condition

Pasteurizing system with Roehrenwaerme exchanger nominal power l/h 600 l/h power heating heater / oil boiler 55 kW Electrical power 1.1 kW Electrical connection 230V 50Hz (1 phase) Electrical fuse 16 A Laenge 1400 mm width 900 mm Height 1850 mm weight 330 / 430 kg Oil consumption 6 kg/hr ; New machine - best condition

Pasteurizing system with Roehrenwaerme exchanger nominal power l/h 1000 l/h power heating heater / oil boiler 90 kW Electrical power 1.1 kW Electrical connection 230V 50Hz (1 phase) Electrical fuse 16 A Laenge 1400 mm width 900 mm Height 1850 mm Weight 350 / 430 kg Oil consumption 10 kg/hr ; New machine - best condition

Pasteurizing system with Roehrenwaerme exchanger nominal power l/h 2000 l/h power heating heater / oil boiler 180 kW Electrical power 1.8 kW Electrical connection 230V 5 0Hz (1 phase) Electrical fuse 16 A Laenge 1715 mm width 900 mm He 1900 mm Weight 492 / 600 kg Oil consumption 19 kg/hr ; New machine - best condition

Key data: 500 mm, 160 mm

Optimisation cross-cut saw OptiCut S 90 Speed - Left-hand version Max. wood entrance length 7.2 m Wood dimensions to be processed Sawing unit for large wood cross-sections with saw blade diameter Ø 500 mm Saw blade made of tungsten carbide, Z=144, WZ 20° Saw Blade Drilling 30 mm Saw blade speed max. 3600 rpm. Input lengths min./max. Widths min./max. Thicknesses/thicknesses min./max. Nominal cross-sections (without board curvature) Min. 500 - 7200 mm 23 - 160 mm 12 - 100 mm 23 x 12 mm .max. 160 x 100 mm Package size at max.9 strips per package Packet Ratio Width and Length to Thickness 160x100 mm 2:1 Fixed length min. 60 mm Performance / Positioning Moving speed of the positioning slide infinitely variable max. approx. 240 m/min. Cutting time / cutting height Adjustable The practical daily output depends to a large extent on the production  ...

Ladies and gentlemen, we have various transformers for sale services of 630KVA to 3500kva Voltage 10KV 15Kv 20KV 22kv, 30kv 33KV immediately available and nationwide available TEL. 01727265324

Vulcatherm Infra Red Oven 250degC max temp with control ID 320x130x2000mm

Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: OKA Type: TBA Depositor working width: 450 mm different: wire cutter moveable on rolls workingtable folding I offer this machine in as-is where it is condition ex warehouse Hessisch Lichtenau, unpacked

TO WHOM IT MAY CONCERN ; WE VE GEA WESTFALIA OIL SEPARATORS OSD 6 WITH BELOW EQUIPMENTS AT OUR STOCK PLS FIND DETAILS ON BELOW --TYPE OSD6 - 91 - 067 / 3 & OSD -91-067 / 6 YOB 2006 SERIAL NO 9037-463 & 9038 - 150 BOWL SPEED 12000 VOLT 380VOLT FREQUIENCY 50Hz --ELWA HEATER TYPE 5609-V kW 12 BAR 6 -- TRANSFER FEED PUMPS --CONTROL PANELS EX STOCK READY TO DELIVER. IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba BEST Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY