eva used for sale

3 Lu-Ve evaporators, type: F35HC 174 E 6, serial numbers: 903380 / 903378 / 778473, year of construction: 2015, 230 V, 1 Ph, 50 Hz, 0.8 A, 175/800 W, refrigerant: R22/R134A/R407F/R407C/R404A/R507, dimensions: (3x) 1420 mm x 700 mm x 700 mm.

Defrosting chamber consisting of: 2 evaporators, dimensions: (2x) 3600 mm x 1250 mm x 1600 mm 2 shutter doors, door width: 3100 mm, total dimensions: 3400 mm x 380 mm x 400 mm. Including switch cabinets, motors and large amount of s/s covers and parts.

GEA evaporator, type: SPB 041 D HOCHLEISTUNGS-LUFTK MARKET PLUS, NUMBER: P1211056, year of construction: 2011, 230 V, 1 Ph, 50/60 Hz, 1 fan, dimensions: 980 mm x 320 mm x 400 mm.

GEA Goedhart evaporator, 2 fans, dimensions: 2000 mm x 650 mm x 700 mm.

GEA Goedhart evaporator, 3 fans, type: VCI-Bp 43507 E, year of construction: 2014, dimensions: 3450 mm x 650 mm x 900 mm.

Walter Roller GmbH & Co. evaporator, type: HVS 403, serial number: 11 251 23 0106, 230 V, 1 Ph, 50/60 Hz, 70/90 W, volume: 2.8 l, refrigerant: G2, 1 fan, dimensions: 620 mm x 420 mm x 440 mm.

GEA Goedhart evaporator, 3 fans, type: DPA 043 C DECKEN-LUFTKüHLER COMFORT DP, manufactering number: P0912020, year of construction: 2012, dimensions: 1800 mm x 1000 mm x 300 mm.

GEA Goedhart evaporator, 2 fans, type: SPBE 062 D HOCHLEISTUNGS-LUFTK MARKET PLUS SP, manufactering number: P054216049, year of construction: 2007, dimensions: 1500 mm x 500 mm x 500 mm.

GEA Goedhart evaporator, 1 fan, type: SPB 061 D HOCHLEISTUNGS-LUFTK MARKET PLUS SP, manufactering number: P164710627, year of construction: 2007, dimensions: 1000 mm x 500 mm x 500 mm.

GEA Goedhart evaporator, 4 fans, type: DPBE 044 C DECKEN-LUFTKüHLER COMFORT DP, manufactering number: P263132683, year of construction: 2003, dimensions: 2000 mm x 1000 mm x 300 mm.

GEA Goedhart evaporator, 2 fans, type: SPBE 35-F32 HOCHLEISTUNGS-LUFTK MARKET PLUS SP, manufactering number: P0715018, year of construction: 2015, dimensions: 1500 mm x 500 mm x 500 mm.

GEA Goedhart evaporator, 2 fans, type: SPBE 35-F32 HOCHLEISTUNGS-LUFTK MARKET PLUS SP, manufactering number: P5114058, year of construction: 2014, dimensions: 1500 mm x 500 mm x 500 mm.

GEA Goedhart evaporator, 2 fans, type: SPBE 35-F32 HOCHLEISTUNGS-LUFTK MARKET PLUS SP, manufactering number: P0715018, year of construction: 2015, dimensions: 1500 mm x 500 mm x 500 mm.

Kuba evaporator, 2 fans, dimensions: 2000 mm x 500 mm x 500 mm.

GEA Goedhart evaporator, 2 fans, type: SPBE 45-F52 HOCHLEISTUNGS-LUFTK CO2 45 bar, manufactering number: 10110809, year of construction: 2015, dimensions: 1500 mm x 500 mm x 500 mm.

GEA Goedhart evaporator, 4 fans, type: DPBE 044 C DECKEN-LUFTKüHLER COMFORT DP, manufactering number: P315409515, year of construction: 2007, dimensions: 2500 mm x 1000 mm x 300 mm.

GEA Goedhart evaporator, 4 fans, type: DPBE 044 C DECKEN-LUFTKüHLER COMFORT DP, manufactering number: P263132683, year of construction: 2003, dimensions: 2000 mm x 1000 mm x 300 mm.

GEA Goedhart evaporator, 4 fans, type: DPBE 044 C DECKEN-LUFTKüHLER COMFORT DP, manufactering number: P263132683, year of construction: 2003, dimensions: 2000 mm x 1000 mm x 300 mm.

Küba Blue Line evaporator, 2 fans, model: SG Industrial, dimensions: 3000 mm x 1000 mm x 1250 mm. With air sock.

Küba Blue Line evaporator, 2 fans, model: SG Industrial, dimensions: 3000 mm x 1000 mm x 1250 mm. With air sock.

Plant includes (1) Vapour Recompressor Kühnle, Kopp & Kausch SFOG 5,6, volume flow: 16.30m³/s, compressor/drive speed: 14,921/3598/min, pressure rise: 140mbar, temperature: 62°C, impeller material: steel, oil supply: fan cooler, control: frequency converter Loher, nominal power: 315kW, weight: 2,95t, with spare motor Loher and impeller with new shaft (2) Gearbox Kühnle, Kopp & Kausch G2a, weight: 1,1t (3) Attachments: steel lamella coupling Siemens/Flender ARP-6, base frame, electric motor and operating manual.

Available in stock 2 x Used RMG Solenoid Gas Valves DN65 PN16, model 01-EVA 25 NH-4. We also have other elements of the gas train available, namely: 1 x Ball Valve DN65 PN16 with pressure switch 1 x Gas Filter DN65 PN16 1 x Gas Pressure Regulator DN65 PN16 The equipment is used but in good working conditions. VDC: 24 Power: 70 W Maximum Inlet Pressure: 0.1 bar Environment Temperature: -20ºC to +60ºC

Artec Eva 3D scanner in very good condition with power supply and USB cable., machine operating hours: unknown, 3d resolution up to: 0.5mm, 3d point accuracy, up to: 0.1mm, 3d accuracy over distance, up to: 0.03% over 100 cm, Warm-up time to achieve maximum accuracy: No warm up time necessary, Colors: 24 bpp, color resolution: 1.3 mp, Light source: Flash bulb (no laser), working distance: 0.4 - 1 m, Measuring field, hxw at the shortest distance: 214 × 148 mm, Measuring field, hxw greatest possible distance: 536 × 371 mm, Angled measuring field, hхb: 30 × 21°, video frame rate, up to: 16 frames/s, recording duration: 0,0002 s, data collection rate, up to: 2 Mio Points / Sec., multi-core processor: Yes, 3d formats: OBJ, PLY, WRL, STL, AOP, ASCII, Disney PTEX, E57, XYZRGB, Playback format for measurements: CSV, DXF, XML, mass: 0.85 KG, Dimensions, hxdxw: 262 × 158 × 63  ...

Bundle consisting of Artec Eva 3D scanner and Artec Spider 3D scanner in very good condition with power supply, USB cable and carrying case. A license for the Artec Studio software must be purchased from Artec at a price of around EUR 2,000. A transfer of the previous license is not possible., machine operating hours: unknown, 3d resolution up to: 0.5mm, 3d point accuracy, up to: 0.1mm, 3d accuracy over distance, up to: 0.03% over 100 cm, Warm-up time to achieve maximum accuracy: No warm-up time necessary, Colors: 24 bpp, color: 24 bpp, lightsource: Flash bulb (no laser), color resolution: 1.3 mp, Light source: Flash bulb (no laser), Lightsource: Flash bulb (no laser), working distance: 0.4 - 1 m, Measuring field, hxw at the shortest distance: 214 × 148 mm, Measuring field, hxw greatest possible distance: 536 × 371 mm, Angled measuring field, hхb: 30 × 21°, video frame rat ...

Fully Automated Perfect Binder & In-Line Three Knife Trimmer, 4 Clamps Perfect Binder with EVA/PUR Gluing Unit from SM-Klebetechnik GZ3530 included 5m Long Hot Glue Hose , AGE 2009, Serial No. 08103754, Book Size: Max. 320x320mm, Min. 145x105mm, Cover Size: Max. 320x660mm, Min. 135x225mm, Book Thickness: 0.3 to 65mm, Cover Weight Range: 81.4 - 302.4 g/sqm, Book Weight Range: 60 - 135 g/sqm, Cover Pile Height: Max. 150mm, Milling Depth Adjustment From 0 To 4mm, Speed: 1.350 Cycles/Hour (with PUR 1.000 Cycles/Hour), Horizon Melt Tank Stand S-470, M-No. 305011, TriCreaser, 4 Creasing Positive/Negative, 2 Creasing, Palmar For Automatic Books Adjustment, Color Touchscreen Panel, Book Thickness Input Caliper SI-470A, Cover Feeder Suction, Supersonic Double Feed Detect Sensor, Glue Tank Unit, Lateral Side Glue, Horizon SI-470A Delivery Conveyor, Smoke Extractor , Horizon Stack Lifter SL-40, M-N ...

1 Zangen Klebebinder - 1-Clamp Perfect Binder CP Bourg BB-3002 EVA Year 2008 - Serial-No. 61300520 Zaehlerstand / Counter 118615 Buchrueckenbeleimung / Spine Gluing Hotmelt Seitenbeleimung / Sight Gluing Hotmelt Fraeswerk mit Absaugung / milling section with extraction Fraestiefe einstellbar / milling depth adjustable Technische Daten / Technical Details: Papierformat / Sheet Size min. 100 x 201mm - 385 x 750mm Umschlagformat / Cover Size min. 100 x 201mm - max. 385 x 750mm Buchstaerke / book thickness min. 1mm - max. 60mm Umschlagstaerke / cover weight range 80 - 300 g/qm Umschlagstapelhoehe / cover pile hight max. 80mm Leistung / speed max. 650 Cycles/h Abmessungen / dimensions 2.020 x 2.400 x 1.500mm -Online-Video-Inspection by Skype-Video-  -We would be very pleased with your visit - more machines on Stock-  -Available Immediately - Can be inspect-  -On Stock Emskirche ...

Baltimore evaporating condensors From 750 to 2000KW

workpiece diameter: mm workpiece length: mm clamping length: mm

Evaporator power: 2x21 kW, each approx. 29 kg, filled with nitrogen, designed for railway technology, packed in welding foil, 2 pieces per pallet each approx. 129/66/40 cm,

Con-Evator PGT Vacuum Hopper Loader for conveying of free-flowing granules from a bag or bin to the intermediate hopper of the processing machine or another hopper.

Vacuum Angle Valve , new

General SKU418U1309 LocationBarneveld MakeGenser TypePowervap-20-EX No.180100 Year of construction02-2017 Main Features Volume20 Ltr. Specified Features - Rotary evaporator MaterialGlass Information With switchgearcheck CEcheck Mounted on framecheck Mounted on wheelscheck ATEX compatiblecheck Extra SpecificationsPOWERVAP is a patented, fully automated pendulum system rotary evaporator with distinguished vacuum stability and distillation rate. - Automatic filling and draining of the rotating flask (patented) - Automatic emptying of the distillate vessel (patented) - Achievement of the desired product concentration - Precise regulation of the distillation process. Temperature, vacuum, and other process parameters are monitored in order to handle even foaming products reliably. - Computerized reflux and standby option - The rotating flask floats freely in the heating bath  ...

General SKU418U1308 LocationBarneveld MakeGenser TypePowervap-20-EX No.170099 Year of construction02-2017 Main Features Volume20 Ltr. Specified Features - Rotary evaporator MaterialGlass Information Mounted on framecheck Mounted on wheelscheck Total height2 m Weight400 kg CEcheck With switchgearcheck Floorspace2,5x0,9 m ATEX compatiblecheck Extra SpecificationsPOWERVAP is a patented, fully automated pendulum system rotary evaporator with distinguished vacuum stability and distillation rate of factor 5 compare to other rotary evaporators. - Automatic filling and draining of the rotating flask (patented) - Automatic emptying of the distillate vessel (patented) - Achievement of the desired product concentration - Precise regulation of the distillation process. Temperature, vacuum, and other process parameters are monitored in order to handle even foaming products reliab ...

General SKU345S695 LocationBarneveld MakeGIG Grill & Grossmann (A) No.5049 Year of construction1994 Pressure Working pressure1 Bar Vacuum possiblecheck Working pressure shell6 Bar Main Features MaterialStainless steel Motor11 KW Surface7 m2 Specified Features - Film evaporator MaterialStainless steel 1.4571 (316Ti) Film evaporatorthin / wiped Notified body(DWBV) Heating surface7,0 m2 Capacity1500 Ltr Rotor sizesdia.584mm x3837mm Product inletDN25 Product outletDN150 Vapour outletDN300 With jacket(170 Ltr) Max. temperature-10/200 °C Rotor with fixed bladescheck Number of blades6 Motor11 KW, 400/690 Volt (EExDE II CT4) Information Total height7,4 M ATEX compatiblecheck Extra SpecificationsThe drive is equipped with a new John Crane mechanical seal. With:  : - 345S697(506.13): Barriquand Platular IJS - Shell and Tube Heat Exchanger - 345S699(506.15): Shell ...

General SKU403U1197 LocationBarneveld MakeE&E Verfahrenstechnik TypeBlasenverdampfer No.2543-5000 Year of construction2010 Pressure Working pressure0.5 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Technical specs Max. temperature170 °C Main Features MaterialStainless steel Motor4 KW Specified Features - Distillation Capacitynetto 500Ltr. (bruto 677Ltr.) Vessel sizesDia. 900x1300mm With jacketcheckVolume 55 ltr, allowable temp -10/170°C, design pressure -1/6 bar Max. temperature-10/+170°C With stirrercheck Motor4,0kW, 400Volt, 1435rpm (EX) Speed49rpm With condensercheck With pumpcheck Sihi pump, type Lemb 161 8Z, 5,0kW 380-420/655-725Volt, 1445rpm (EX) MaterialStainless steel 1.4404 (316L), Stainless steel 1.4435 (316L), Stainless steel 1.4571 (316Ti) Information Mounted on frameOn stainless steel frame With switchgear ...

General SKU403U1196 LocationBarneveld MakeJenaer Glaswerk TypeDSV50 Year of construction1995 Pressure Vacuum possiblecheck Main Features MaterialGlass Surface0.1 m2 Specified Features - Film evaporator Film evaporatorcheck Heating surface0.1m² Rotor sizesDia. 33,6x 500 mm With jacketcheck Rotor with fixed bladescheck Number of stages on rotor:1 Number of blades2 Motoreurostar kika labortechnik With variable speed drivecheck Rotor speed50-2000rpm With condensercheck Heating surface0,05m² MaterialGlass Information Mounted on framecheck Total height3,75 m Floorspace1,6x1mNew arrivalsFilm evaporatorsJenaer GlasNew arrivalsColumns > Film evaporatorsBrand > Jenaer Glas What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine ...

Used complete powder plant existing out of evaporator (4-effect, TVR), high pressure pump, spray dryer, packaging line in 25 kg bags and palletising robot., Previously used for whole milk powder (WMP). Line was running an input of ± 280.000 liters whole milk per day and an output of ± 28.000 kg of WMP per day., Still mounted inside the factory., The main components of the line:, - Evaporator, 4-effect, TVR, Manufacturer: Tebel - Van der Ploeg, Type: Falling film evaporator, Stages: 4-effect, Compression: TVR, Year: 1975, Capacity input for whole milk: ± 13.000 liter per hour (± 11,2% TS), Capacity output for whole milk: ± 3.000 kg per hour (± 48% TS), Capacity input for skim milk: ± 14.500 liter per hour (± 8,8% TS), Capacity output for skim milk: 3.000 ± liter per hour (± 48% TS), Capacity input for whey: ± 16.500 liter per hour (± 6% TS), Capacity output for whey: ± 3.000  ...

Description:  , GENERAL MACHINE DESCRIPTION: A. Roller Conveyor for cell entry B. Machine for aluminium adhesive tape winding and cutting. C. Nr. 2 machines for butile adhesive tape application, tube and polietilene adhesive tape wrapping around and for aluminium tube end cutting. D. Machine for aluminum tube coining. E. Machine for internal tube diameter calibration on one or both ends. F. Pick-up for cell moving on single machines or from machines to roller conveyors. G. Conveyor for worked cells unloading.  , DIMENSIONS OF CELLS  , This sytem is projected to work cells type: COMBI BOTTOM and COMBI TOP.  , NOTE: Machine is not under power, already dismantled. Approx. Onsite Dimension. (l x w x h): 15,000 x 15,000 x 6,000 mm, weight approx.: 50,000 kg

workpiece diameter:250 mm workpiece length:1000 mm turning speeds:25 - 250 U/min total power requirement:19,5 kW Combined Tapes and Stone Superfinish Maschine in exzellent condition. This machine was designed for fully machined of V8 - TDI cam shafts. - 8 Staions with stone for camlobe - 5 stations with tapes for bearing seat Istallation of the line: - Stacking cell PROMOT - Linear gantry for loading the workpiece on the lift bar conveyor - Machine - Unloading with linear gantry ( oil whizzer installed ) - Washing machine AHRENS + BODE

AVAILABLE FROM THE END OF AUGUST 2023 3 MONTHS WARRANTY Offer consists of: - 4-pliers perfect binder BQ-470 PUR-D (nozzle application system) - PUR adhesive system incl. 2kg bevel melt Horizon BQ-470 PUR-D Bookbinding Plant for photo book production. Soft or hardcover Details: BQ-470, PUR-D2 Horizon PUR nozzle, 4 pliers perfect binder -Format: Paper size: min. 145x105mm; max. 320x320mm Spine: min. 1mm; max. 65mm Envelope size: min. 225x135mm; max. 660x320mm - Output: max. 800 cycles/h - Grammage: Content: 60-135g/sqm/ Envelope: 80-300g/sqm - Envelope stack height: max. 150mm -Groove: 4-fold creasing positive/negative 2-fold creasing and variable gauze feed - Binding capacity: with 2kg PUR container, format A4: approx. 6,500 pcs. At 2mm block density with 0.5mm application approx. 650 pcs. At 20mm block density with 0.5mm application - Powe ...

Corona Pull Roll Station 1 Primer Coater & Dryer 3 Extruders (with QSE Adapter, extrusion Do, Die, Gravimetrics 3+1) Auxiliary Unwind with splicing unit shafted desi! Laminator Edge Trim Razor Blade Beta Thickness Gauge PROTAGON Corona with Nip Station 3 Edge Trim Shear Cut Centre Slit&Spreader Ro Automatic Splicer Two direction Rewind Shafted Design Typlcal substrates: Paper:20 - 150 g/m2 Aluminium :6,35 - 25 μm PE:40 -120 μm BOPA: 15-50 μm BOPET: 9 -50 μm (smooth and metallised) BOPP: 15- 50 μm (smooth and metallised) Nonwoven PP: optional The extruder or extruders of the extrusion sta· motorized carriage. This carriage with a 3-\i UP/DOWN,LEFT/RIGHT and IN/OUT travel. The extruder carriage consists of: guide frame 4 wheels. Height adjustment traveldrive Side adjustment Control cabinets EXTRUDER A Screw diameter: 114.3mm (4.5 inches) Screw ...

Manufacturer: Homag PU und EVA, Type: KAL 310 310/6/A3/S2, Year: 2008, Control: NC 22, Software: Homag, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 65, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 12-60, Min-max feed m/min: 10-25, Premilling: yes, Fine milling: yes, Application of separation agent: yes, IR zone: yes, Coil magazine: 2-fach, Mitre stations: HL 81, Bevel milling: yes, Corner tracing type: FF 12, 4 motors: Ja, Radius scraper: yes, Type of scraper: PN 10, Flat scraper: FA 11, 4 motors: Ja, Ersatzverleimteil : PU, Bonding part EVA: EVA, Buffing unit: yes, Separation agent setup: yes, Year :2008

Kolbus Perfect Binding Line, Equipped With: Gathering Machine: Kolbus ZU 805 Gathering Machine, AGE: 2016, Basic Frame with 16 Gathering Stations, Gathering For Folded Sections And Single Sheets Possible, Mechanical And Electrical De-Coupling Of Each Station Possible, Air Center Vacuum And Compressed Air Supply For Gatherer, Reject Unit AS Raceway/Transfer, Integrated Jogging Station, Transfer Channel As Connecting Unit To The Binder, Perfect Binder: Kolbus KM 600, AGE: 2016, 21 Clamps With Co-Pilot Touchscreen, TFT Visualizing Monitors With Graphic Operator Guidance, Milling/Brushing, Equalizing Milling, Notching And Brushing Units, Kolbus LH370 EVA Hot-Melt Pre-Melt Unit, EVA Hot-Melt Roller Type Spine Gluing Unit On Mobile Base, PUR Spine Glue With Nordson Pre-Melter, EVA Hot-Melt Side Glue Unit With Controlled Cut-Off, I.R. Heating In Radius For Increased Glue Open Time, RA 49.A Pile ...

Description: Position: 1 SubFamily: Edgebander BATCH 1 Brand: BIESSE Model: STREAM B1 10.5 MDS Type of edging Thin edge Thick edge Gluing System EVA Hotmelt  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  , Premilling Unit , Corner Rounding Unit Grooving Unit , Maximum panel thickness 60 mm Max. panel height 60 mm Min. panel length 150 mm Min. panel width 65 mm Min. edge thickness 0.3 mm Max. forward feed speed 25 m/min Pressure with rubber belt Panel support guides , with positioning by NC , Infeed panel alignment system , MDS No. Panel Sizing / Milling units Unit : pre-milling unit automatic timed intervention Edge coil magazine , no. positions 12 glue pot for EVA hot melt glue , premelter for EVA hot melt glue , no. pressure roller 4 with positioning by NC , No. Edge Process ...

Description: Type of edging Thin edge Thick edge Solid wood Gluing System EVA Hotmelt Premilling Unit yes Corner Rounding Unit yes Max feed speed 14 m/min Maximum panel thickness 60 mm Operating Units 8 nr Min. panel height 8 mm Max. panel height 60 mm Min. panel width 70 mm Min. edge thickness 0.3 mm Max. edge thickness 3 mm Max. forward feed speed 14 m/min Top pressure yes Pressure with idle wheels Panel support guides yes with positioning by NC yes No. Panel Sizing / Milling units 1 NO. PANEL SIZING / MILLING UNITS 1 Unit : pre-milling unit automatic timed intervention : yes motor power : 2.2 KW Lamps to preheat the side of the panel yes Edge coil magazine yes no. positions 1 Gluing system yes glue pot for EVA hot melt glue yes premelter for EVA hot melt glue yes Roller set to press the edge yes no. pressure roller 3 with positioning by NC yes No. Edge Processing Units 6 NO. EDGE PROC ...

Mobile Solar Power MS-2000 (Ref. No. 504-2626) Battery capacity: 600'000 A/h, or 2'220 W/h Power: 2'000W, max. 5'000W Battery Type: ternary lithium-polymer battery Size: 320x230x335mm Adapter: DC 25.5V/8A, 204W max. Solar Power: 18V 10A 180W Recommended design: 100W 17.6V, 5.68A solar panel Direct charging DC: 12V 4.5A AC output: 220V 50Hz/110V 60Hz AC output 3 ports: 2000W, max 5000W Connections: USBX2:5V, 3.1A max. QC3.0X1:5V/3A,9V/2A,12V/1.5A DC output: 12V, 7A max. PD type-C X1: PD 60W, 5V/3a, 9V/3a, 12V/3a, 15V/3a, 20V/2.2A (bidirectional) Cigarette lighter 13V / 10 MS-SP200/200W 200W solar panel as portable power plant 2000W, MS-SP200/200W Peak Power : 200W Efficiency of the cells: MONO >19% Cable length: 2M/14AWG Output : 19V Material: PET+EVA+Solar cell+EVA+PCB+Nylon Color: Black & Orange AC input power supply Vehicle Charger Cable DC 100W ...

The machine was built in 2023 Only medical EVA was used. Production was made for trial purposes and the machine did not get tired. Can absorb EVA, PE, and many soft materials.

Equipment/technical data: - e-Motion control with 21" smartouch instead of 10" tempora F 800 Ser - Upper pressure beam motor-controlled, adjustable workpiece height 8-60 mm - Chain feed 12 m/min, 1.5 kW, Minimum workpiece length 140 mm - Turntable edge magazine for roll edge material 0.4 - 3 mm and strip magazine for 12 pieces 10 mm edges - Edge feeding for roll and strip material - pneum. Controlled gluing unit, Teflon-coated, for 1.5 kg EVA granules, with synchronized glue roll and quick-change system. (for PUR adhesive processing, taking into account the Adhesive processing guidelines) - Pneumatically operation-controlled pressure unit e-motion (one driven, two conical contact rollers) tempora 60.12/2: 0-12mm - Impact shears for roll material - Cross-cut saw with 2 motors - Joining milling unit 2 x 1.5 kW - Upper and lower combination milling unit, 0.75 kW each, flush a ...

Description: Type of edging Thin edge Thick edge Gluing System EVA Hotmelt Premilling Unit yes Corner Rounding Unit yes Max feed speed 11 m/min Maximum panel thickness 50 mm Operating Units 8 nr Min. panel height 8 mm Max. panel height 50 mm Min. edge thickness 0.4 mm Max. edge thickness 3 mm Max. forward feed speed 11 m/min Top pressure yes Panel support guides yes No. Panel Sizing / Milling units 1 NO. PANEL SIZING / MILLING UNITS 1 Unit : pre-milling unit automatic timed intervention : yes motor power : 2.2 KW Edge coil magazine yes no. positions 1 Gluing system yes glue pot for EVA hot melt glue yes Roller set to press the edge yes no. pressure roller 3 No. Edge Processing Units 5 NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming no. motors : 2 motor power : 0.18 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 2 Processing Unit : top and bottom rough trimming no. motors : 2  ...