british flag
Resale Logo

eva used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information used woodworking technology  Höchsmann GmbH  http://www.woodtecauction.com 
banner logo
start page > keywords eva > results
887 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
125479986 103

FRITZ WERNER SSF 3 for sale
Portal Milling Machines


MULTIPLE-spindle milling machine FRITZ WERNER SSF 3 - 07-99-001 shipping time: immediately number: 07-99-001 manufacturer: Fritz Werner type: SSF 3 MACHINE data built: approx 1980 L x W x H: approx. 1900 x 1800 x 1800 ...
used machine
 
MULTIPLE-spindle milling machine FRITZ WERNER SSF 3 - 07-99-001 shipping time: immediately number: 07-99-001 manufacturer: Fritz Werner type: SSF 3

MACHINE data built: approx 1980 L x W x H: approx. 1900 x 1800 x 1800 mm weight: approx. 1200 kg

Very good condition

Machines for cutting dovetail guides specifications suitable including multiple SPINDLES - milling procedures: X - axis: approx. 600 mm Y - axis: approx. 200 mm Z - axis: 500 mm Tischaufspannï¬?äche: approx. 740 x 220 mm spindle number: 3 piece speed - locker El: approx. 3000 rpm total power: approx. 7.5 kW feeds & express ducts: Max in all 3 axes milling range (dovetail): approx. 400 mm (wide) range of 1 & 3 Milling spindle: about 50-80 degrees elevation 1 & 3 Milling spindle: approx. 80 mm height Ung 2. Milling spindle: approx. 50 mm accessories â?¢ left / right rotation â?¢ mechanical vise â?¢ 10 pieces-various milling head attachment â?¢ various milling head dies â?¢ work lamp accessories on request price and other specifications on request
1980
Price  
    request
125490276 702

EVA Apfelschälmaschine EVA, elektr. for sale
apple-peeling-machine EVA, electr.,


Peels, cores and slices apples into slices and punctures the core casing. Put the apple on - turn it on - done!

 
Peels, cores and slices apples into slices and punctures the core casing. Put the apple on - turn it on - done!
 
Price  
    request
125479978 101

CHEVALIER VMC 2040 for sale
Numerically Controlled Machining Centres


Machining center - vertical CHEVALIER VMC 2040 bearing no 1105-02406 category machining center - vertical make CHEVALIER type VMC 2040 year 2000 State second-hand machine control CNC SIEMANS 810 D storage location from d ...
used machine
 
Machining center - vertical CHEVALIER VMC 2040 bearing no 1105-02406 category machining center - vertical make CHEVALIER type VMC 2040 year 2000 State second-hand machine control CNC SIEMANS 810 D storage location from donor country of origin taiwan s ince immediately cargo base free loaded truck technical details x way 1050 mm y-way 500 mm z trail 500 mm control SIEMANS 810 D rapid traverse X 30 m / min spindle speeds 8000 U/min rapid traverse Y 30 m / min rapid traverse Z 18 m / min Werze ugplätze in the magazine 20 BT 40 distance between spindle nose and table 100-735 mm table size table burden 1450 X 635 mm 1200 T MAX tool diameter 80 (160) mm of maximum tool weight 12 kg tool change time 2.4 sec power Haupspindel 15 power X-axis 3.3 kW motor power Y-axis 3.3 kW motor power Z-axis 3.5 kW total power 25 kVA machine weight 5.5 tons of space requirement approx. L 2.8 X 3,300 X 2.7 m description machine with X 1020
Y 500 Z 500 mm
SIEMENS 810 D
TABLE 1250 X 535
2000
18,500 €  
    request
125483401 2404

Andere FRANCE ELEVATEUR 262 TBA, STEIGER for sale
Crane trucks


; Transmission: Sonstige; Colour: Weiß
used machine
 
; Transmission: Sonstige; Colour: Weiß
2005
22,900 €  
  DE   request
125465516 107

DURMA AD-S 30100 for sale
CNC Bending Machines


OVERVIEW: Brand: Durma Model: AD-S 30100 Application type: Bending Machine type: Bending Machine Availability: Immediately Construction year: 2013 Production hours: 18979 Location: Turkey Origin country: Turkey  ...
used machine
 
OVERVIEW:
Brand: Durma
Model: AD-S 30100
Application type: Bending
Machine type: Bending Machine
Availability: Immediately
Construction year: 2013
Production hours: 18979
Location: Turkey
Origin country: Turkey

GENERAL DATA:
Measurements width: 2600 mm
Measurements depth: 4500 mm
Measurements height: 3100 mm
Machine weight: 9500 kg

MAIN DRIVE:
Pressing force: 100 kN
Bending length: 3050 mm

CONTROL UNIT:
Brand: CYBELEC
Model: ModEva 10S

MEDIA:
Main electronic connection: 400 V
Power consumption: 11 kVA

ADDITIONAL EQUIPMENT:
1 - Tools
2 - Back Guard with safety switch
3 - Laser Light Front Guards
2013
Price  
  TR   request
125442955 2500

BALZERS BA 510 for sale
Balzers BA 510 Vacuum evaporator


 
9,650 EU?  
  PL   request
125436726 102

POREBA TCA 160 for sale
Heavy Lathes


Heavy lathe POREBA TCA 160 was produced in 1959 by the famous Polish FUM POREBA. Technical data of lathe POREBA TCA 160: Operating range : - tusks elevation: 800 mm - maximum turning diameter over the bed: 1600 mm  ...
used machine
 
Heavy lathe POREBA TCA 160 was produced in 1959 by the famous Polish FUM POREBA.

Technical data of lathe POREBA TCA 160:
Operating range :
- tusks elevation: 800 mm
- maximum turning diameter over the bed: 1600 mm
- maximum turning diameter over the slide: 1300 mm
- eyepiece: fi 800 mm
- maximum diameter of turning in semi-shank: 250 mm
- maximum turning length: 6000 mm
- maximum weight of the workpiece in centers: 16000 kG
- acceptable cross-section of the chip (for turning steel Rr = 60 kg / mm2) on one slide: 30 mm2
- acceptable cross-section of the chip (when turning steel Rr = 60 kg / mm2) on one slide: 50 mm2
- allowable force on the knife: 6000 kG
- allowable torque on the spindle: 630000 kGcm
- maximum cross-cut of the knife stem: 70 x 70 mm

Headstock:
- spindle speed: 24 n
- speed ratio exponent: 1.25
- spindle speed range: 1.12-224 rpm, 1.12-224 rpm, 0.85-170 rpm.
- diameter of the front spindle journal: 260 mm
- slot in the metric cone spindle: No. 120
- reduction sleeve for metric cone canes: No. 120/80
- diameter of the hole in the spindle: 105 mm
- diameter of the grip wheel: 1600 mm

Support, normal feeds:
- 20 longitudinal feeds in the range: 0.19-5.0 mm / rev.
- 20 cross feeds in the range: 0.095 - 2.5 mm / rev.
- 20 feeds on the top drawer in the range: 0.095-2.5 mm / rev.

Support, eight-feeds:
- 20 longitudinal feeds in the range: 1.5-40 mm / rev.
- 20 cross feeds in the range: 0.75-20.0 mm / rev.
- 20 feeds on the top drawer in the range: 0.75-20.0 mm / rev.

Support, minute feeds:
- 20 longitudinal feeds in the range: 12-320 mm / rev.
- 20 cross feeds in the range: 6-160 mm / rev.
- 20 feeds on the top drawer with a range of 6-160 mm / rev.

Support, threading feeds (main screw train):
- 35 threads of thread metric about the range : 1-50 mm
- 35 increments of inch threads in the range: 24 - 1/2 coil / inch

Support, threading feeds on the top drawer:
- 25 threads pitch metric about the range 0.25-7 mm
- 35 increments of inch / roll threads. : 28-3 coil / inch
Feeds associated with turning of cones with inclinations forming: from 1: 1.5 d 1: 1000
- rapid traverse: 4000 mm / min.

Konik:
- diameter of the sleeve: 200 mm
- sleeve travel: 600 mm
- slot in the conical spindle meter .: No. 80
- transverse offset: + -30 mm

Glasses:
- scope of regulation of diameters of the eyepiece of normal equipment: 200-500, 200-600, 300-800 mm
- scope of regulation of the diameters of the special equipment eyepiece: 30-300, 50-400, 200-500 mm

Hemocular:
- semi-barrel diameters adjustment range: 50-250 mm

Drive:
- main engine power: 40 kW
- main engine speed: 750 rpm.
- fast feed motor power: 2.2 kW
- speed of the motor of rapid feeds: 3000 rpm.
- oil pump motor power: 0.37 kW
- engine speed of the oil pump: 1500 rpm.
- oil pump capacity: 25 l / min.

Size and weight:
- distance between centers: 3000-15000 mm
- weight at 6000 mm and 1 support: approx. 30000 kg
- additional weight over the difference of 1000 mm: 1200 kg
- weight of an additional slide: 1500 kg
1959
28,750 €  
  PL   request
125442915 1501

D24 for sale
Battery charger stacker ant electrical elevating


 
Price  
  DE   request
125412402 603  

MONARCH-SCALVOS PROTTI good models excellent conditio for sale


MAJOR TEXTILE Knitting PLANT LIQUIDATION (Please your intrest with confirmed target price immedaitely) KNITTING 12 Monarch FIL 8AEQ, 30", 4-18 cut, 8-24 cut, 84 feed 2 Monarch FIL 8AEQ, 30", 18 cut, 84 ...

 

MAJOR TEXTILE Knitting PLANT LIQUIDATION
(Please your intrest with confirmed target price immedaitely)



KNITTING
12
Monarch FIL 8AEQ, 30", 4-18 cut, 8-24 cut, 84 feed
2
Monarch FIL 8AEQ, 30", 18 cut, 84 feed, 50 % lycra
10
Monarch FIM 108A, 30", 24 cut, 108 feed
1
Monarch FDR Rib, 26", 14 cut, 52 feed
3
Monarch Rib, 26", 14 cut, 52 feed, Lycra
1
Monarch Rib, 20", 14 cut, 40 feed
1
Monarch SEC Electronic Striper, 30", 16 cut, 36 feed
6
Monarch FXC4S, 30', 20 cut, 122 feed
4
Monarch RACE, 30", 28 cut, 122 cut
1
Monarch STEP JACK, 30", 20 cut, 72 feed
14
Monarch RXDF, 30", 122 feed, 3-24 cut, 6-22 cut, 5-18 cut,
24
Monarch RX4S, 26", 104 fd, 2-28 cut, 4-24 cut, 9-18 cut, 9-22 cut,
7
Monarch FXC 4S, 26", 20 cut, 104 fd.
6
Monarch RX4S, 26", 20 cut, 104 fd.
8
Monarch RX WSY Striper, 30", 48 feed, 5-16 cut, 1-18 cut, 1-28 cut

FLAT KNITTING
2
Protti PV94 Doublelock, 240 cm, 12 gauge
6
Protti PT222, 213 cm, 12 cut
9
Protti PT242 Jacquard, 218 cm, 12 cut
35
Stoll JBOMB, 150 cm, 160 cm & 180 cm, 12 gauge

DYEING
1
Gaston Jet Dye, 80 lb., 1996, M6000 Controller
4
Sclavos Jet Dye, Venus HT3, 3 port, 1000 lbs., 50 PSI, 1999, updated Recore controls, 2014-15
3
Gaston Futura, 2 port, 1000 lbs., 53 psi, Barco controls, 1987
1
Gaston Futura Jet Dye, single tube, 160 lbs,, 1992, M3000 controller
4
Recore Dye Machine Controllers, 2012-14
6
Then Airflow, 1200 lbs., 3 strand/3 ports, 1988
1
Then Airflow, 400 lbs., 1 port, 1987
3
Arganthan Jet Dye, 80 lbs. each, 60 PSI, 1982-80
1
Arganthan Jet Dye, 400 lbs., 60 PSI, 1982
11
Arganthan Jet Dye, 4 ports, 1000 lbs., 60 PSI, 1980
7
Gaston 824 Jet Dye, 5-3 port, 2-2 port
200
Stainless Mixing Tanks with mixers, 50 to 250 gal.
200
Dyehouse Trucks, 72" x 42" wide x 35" dp.


FINISHING
1
Santex Santastrech Plus 120, 48" wide, 120 cm, balloon extractor, 5 to 60 YPM, 1994
1
Santex SANTASHRINK Dryer, 220 cm wide, with pin tenter entry, 1994, 6K/220 Gas IR SRS + SPR+FOUL+CUT, gas fired, 6 chambers, 2400 lbs./hour evaporation capacity, 6.1 mil BTU/HR
1
TubeTex Dryer #6 gas fired drum, entry with 3- Fabcon Padders
1
Bianco Slitter, 86" wide, Bianco slitter head (updated 2015), rope squeeze, detwister, folder, stainless steel
1
Bianco Slitter, 86" wide, opener and detwister, 2 scrolled rolls, flat folder
1
Stentex Tenter Stentotherm 3300, 1995, 2400 mm max. working width, unwind, J box, Dogal uncurler, 2 Santex Padders, 102" wide, Bianco Weft Straightner, E & L guiders, low profile gas fired 12 zones,
1
Krantz Syncro Shrink Conveyor Dryer, 100" wide belt
2
Famatex Tenter #1 & #2
3
Tube Tex Drum Dryers, 48" wide & 72" wide
1
Fabcon Drum Dryer, 8 zone
5
Tubular Inspection machines
6
6
Fabcon Tubular Gullwing Tubular Compactors, 52" wide
Fabcon & Tubetex Tubular Calendars, 50" & 60" wide
1
Argathen Bleach Range, 10 section, 2200 lbs. hour.
1
Jemco Bleach Range, Model III 2000 CBR, 2,000 lbs. hour, 1995
1
Curtis & Marble, plastic roll wrapping
1
Bespoke Dye Mixing System, Year 2000, 16 pumps, 2 Model SRD Exact Weigh liquid chemical collecting, mixing, batch weighing, 2 IR dual head centrifugal pump, Mettler intergrated scale
1
Tube Tex, drum dryer 1999, with 3 Tube Tex tubular padders
1

1
Monforts Knitgoods Toptex 92" wide, open width rubber belt compactor, Kombi Batcher, steam heated main cylinder, 1990
Fabcon Open Pin Tenter, 90" wide x 20' long, steaming section, batcher
1
LABORATORY: Raitech Quickwash, DataColor 500, Milnor Washer, Huebsch Dryer 50 lb., PLUS MANY MORE ITEMS
25
Merrow Sewing Machines, with table and motor
2
Gardner Denver Air Compressor, 60 HP
1
Gardner Denver Air Compressor, 200 HP
3
Ingersoll-Rand Screw Compressor, 2- 250 HP, 1-150 HP
3
Propane Storage Tanks, 30,000 gallon, with mixer
4
Stainless Steel Outside Tanks, 6000 gal to 10,000 gal.
3
Waste Balers, vertical style
2
Cleaver Brooks Package Boilers, 800 HP, 1988 + 1989, dearator system


PLEASE CONTACT US FOR FURTHER INFORMATION .
 
Price  
  AE   request
125442939 110

MITUTOYO 192 for sale
Elevator measuring instrument scribe and drill eq


 
Price  
  DE   request
125397296 708

GUENTNER GÜNTNER GHN 066D/37 for sale
Evaporator Air Cooler Heatexchanger


Evaporator Guentner Type: GHN 066D/37 Volume: 99 ltr Fin Spacing: 7 mm Gas defrost in block / place for electric defrost Cooling capacity : 70kW at -8 / 40 Number of fans: 3 x 660mm Refrigerant: Freon Dimension ...

 
Evaporator Guentner

Type: GHN 066D/37
Volume: 99 ltr
Fin Spacing: 7 mm
Gas defrost in block / place for electric defrost
Cooling capacity : 70kW at -8 / 40
Number of fans: 3 x 660mm
Refrigerant: Freon
Dimensions: 4261mm x 900mm x 965mm

In very good condition

Number in stock: 1 piece,

Price on request,

We have many other Kealteanlagen: BITZER, Copeland, Frascold, Lunite, Kueba, Guentner, eco, Alfa-Laval, Goedhart, Helpman
 
Price  
    request
125386359 104

GLEASON 13 for sale
Cutter Sharpener


Weight approx.: 4000 kgDimensions (l x w x h) approx.: 2300 x 1500 x 1600 mmDescription: Diameter of cutter 152-304 mm. Revacycle cutters 406-457 mm. Coniflex cutters 229-381 mm. Wheel size 12?x¼-4?. Wheel drive motor 2 ...

 
Weight approx.: 4000 kg
Dimensions (l x w x h) approx.: 2300 x 1500 x 1600 mm
Description: Diameter of cutter 152-304 mm. Revacycle cutters 406-457 mm. Coniflex cutters 229-381 mm. Wheel size 12?x¼-4?. Wheel drive motor 2 CV. Serial Nº24972. Internal reference 110.246
 
used machinery auction RESALE 3,000 €  
  ES   request
125397294 708

GUENTNER GÜNTNER GHN 080.2H/17-END50.E for sale
Evaporator Air Cooler Heatexchanger


Evaporator Guentner Type: GHN 080.2H/17-END50. E Volume: 59 ltr Fin Spacing: 7 mm Electric defrost Cooling Capacity: 38,4 kW at 8 / 40 Number of fans: 1 x 800mm Refrigerant: Freon Year of manufacture: 2007 Dim ...

 
Evaporator Guentner

Type: GHN 080.2H/17-END50. E
Volume: 59 ltr
Fin Spacing: 7 mm
Electric defrost
Cooling Capacity: 38,4 kW at 8 / 40
Number of fans: 1 x 800mm
Refrigerant: Freon
Year of manufacture: 2007
Dimensions: 2340 mm x 1060 x 1260 mm

In very good condition

Number in stock: 2 PCs.

Price on request,

We have many other Kealteanlagen: BITZER, Copeland, Frascold, Lunite, Kueba, Guentner, eco, Alfa-Laval, Goedhart, Helpman
 
Price  
    request
125373019 1108

NEDERMANN 51042.0 for sale
Suction for gas evacuation Nedermann


Suction for gas evacuation Brand: Nedermann Model: 51042 Voltage: 380 V, three-phase Power: 0.75 kW Unrollers: 3 piping Dismantling at the expense of the buyer. The installation is located at a height of + -  ...

 


Suction for gas evacuation

Brand: Nedermann

Model: 51042

Voltage: 380 V, three-phase

Power: 0.75 kW

Unrollers: 3

piping



Dismantling at the expense of the buyer.

The installation is located at a height of + - 4,5M on the ceiling


 
used machinery auction RESALE 30 €  
  BE   request
125391883 1300  

MATTER SRL MAT 00.6 for sale
AUTOMATIC SHEETS STORAGE SYSTEM


Qty. 1 Second-hand automatic sheets (pallets) storage system Mfc.: MATTER S.R.L Built: 2002 Model: Mat 00.6 Number of Automatic Retrieval Cars: 2 Number of drawers: 756 Pallets Dimension of Pal ...
used machine
 
Qty. 1 Second-hand automatic sheets (pallets) storage system
Mfc.: MATTER S.R.L Built: 2002 Model: Mat 00.6
Number of Automatic Retrieval Cars: 2
Number of drawers: 756 Pallets
Dimension of Pallets: Width: 1000/1500 mm / Length: 2000/4000 mm / Height: 250 mm Max.
Pallet Weight: Max: 3000 kg
Maximum speed of Retrieval Cars: Y Axis: 11 m/min . / X Axis: 58 m/min. / Z Axis: 20 m/min.
System is working with Picking Station for separating and handling of pallets
Dimensions of the system: Length: 74 meters x Width: 9.40 Meters
(not including the picking station) X Height: 9.6 meters ( 9 rows )
2002
Price  
  DE   request
125372906 2100

Evacuation pipes


Evacuation and ventilation pipes Galvanized steel

 


Evacuation and ventilation pipes

Galvanized steel


 
used machinery auction RESALE 20 €  
  BE   request
125378772 107

GABELLA for sale
Recoilers


Technical data/technical data: Band width max. / strip width Max: 1.500 mm Max band thickness / strip thickness Max: 1.5 mm Coil inside diameter/coil inner dia: 508 mm Coil weight/coil weight: 1,000 kg Bicycles/wh ...
used machine
 
Technical data/technical data:

Band width max. / strip width Max: 1.500 mm
Max band thickness / strip thickness Max: 1.5 mm
Coil inside diameter/coil inner dia: 508 mm
Coil weight/coil weight: 1,000 kg
Bicycles/wheels: 4 each/no.
The reel is completely outdated/the recoiler is completely overhauled
New paint, new painted
New control panel with regulator/new switchboard with inverter
2005
Price  
    request
125366056 1900

Lot of Lifting Equipment


Weight approx.: 80 kgDimensions (l x w x h) approx.: 1500 x 600 x 200 mmDescription: Scissor jack TOPAL, lifting capacity 500 kg, from 100 to 250 mm, 1 T-beam lifter CORSO, load capacity 1000 kg, from 70 to 250 mm, 2 rol ...

 
Weight approx.: 80 kg
Dimensions (l x w x h) approx.: 1500 x 600 x 200 mm
Description: Scissor jack TOPAL, lifting capacity 500 kg, from 100 to 250 mm, 1 T-beam lifter CORSO, load capacity 1000 kg, from 70 to 250 mm, 2 roller lifters, 1 car jack, 1 crane chain length 3000 mm, load capacity approx. 4500 kg, 1 crane chain length 800 mm, load capacity 2100 kg, 1 shortable crane chain length 2400 mm, 1 crane chain 600 mm, load capacity 2100 kg, attention: crane chains are safety-relevant components and have to be checked before use!
 
Price  
  GB   request
125374560 107

SCHECHTL HT 200 for sale
Hand Lever Shears


HAND lever plate shear SCHECHTL HT 200 - 01-07-010 delivery time: immediate number: 01-07-010 manufacturer: Schechtl type: HT 200 MACHINE data year: approx. 1995 L x W x H: approx. 2500 x 1500 x 1500 mm weight: approx ...
used machine
 
HAND lever plate shear SCHECHTL HT 200 - 01-07-010 delivery time: immediate number: 01-07-010 manufacturer: Schechtl type: HT 200

MACHINE data year: approx. 1995 L x W x H: approx. 2500 x 1500 x 1500 mm weight: approx. 400 kg

Very good general condition specifications control: conventional maximum sheet thickness (steel): approx. 1.25 mm max sheet thickness (aluminum): approx. 2.00 mm max sheet thickness (stainless steel): 1.00 mm max sheet thickness (copper): approx. 1.25 mm maximum sheet length: approx. 2050 mm

Manual back gauge: approx. 600 mm working height: 800 mm

Accessories on request price and more technical data on
1995
Price  
    request
125366322 1900

HONEYWELL CS 10 XE for sale
Lot of Evaporation Air Cooler


Weight approx.: 20 kgDimensions (l x w x h) approx.: 700 x 500 x 950 mmDescription: 2 pcs., see photos

 
Weight approx.: 20 kg
Dimensions (l x w x h) approx.: 700 x 500 x 950 mm
Description: 2 pcs., see photos
 
used machinery auction RESALE 50 €  
  CH   request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
More EVA models (2 or more machines):
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold

Sold machinery

Monarch-Scalvos Protti good models excellent conditio


MAJOR TEXTILE Knitting PLANT LIQUIDATION (Please your intrest with confirmed target price immedaitely) KNITTING 12 Monarch FIL 8AEQ, 30", 4-18 cut, 8-24 cut, 84 feed 2 Monarch FIL 8AEQ, 30", 18 cut, 84 feed, 50 % lycra 10 Monarch FIM 108A, 30", 24 cut, 108 feed 1 Monarch FDR Rib, 26", 14 cut, 52 feed 3 Monarch Rib, 26", 14 cut, 52 feed, Lycra 1 Monarch Rib, 20", 14 cut, 40 feed 1 Monarch SEC Electronic Striper, 30", 16 cut, 36 feed 6 Monarch FXC4S, 30', 20 cut, 122 feed 4 Monarch RACE, 30", 28 cut, 122 cut 1 Monarch STEP JACK, 30", 20 cut, 72 feed 14 Monarch RXDF, 30", 122 feed, 3-24 cut, 6-22 cut, 5-18 cut, 24 Monarch RX4S, 26", 104 fd, 2-28 cut, 4-24 cut, 9-18 cut, 9-22 cut, 7 Monarch FXC 4S, 26", 20 cut, 104 fd. 6 Monarch RX4S, 26", 20 cut, 104 fd. 8 Monarch RX WSY Striper, 30", 48 feed, 5-16 cut, 1-18 cut, 1-28 cut FLAT KNITTING 2 Protti PV94 Doublelock, 240 cm, 12 gauge 6 Protti PT222, 213 cm, 12 cut 9 Protti PT242 Jacquard, 218 cm, 12 cut 35 Stoll JBOMB, 150 cm, 160 cm & 180 cm, 12 gauge DYEING 1 Gaston Jet Dye, 80 lb., 1996, M6000 Controller 4 Sclavos Jet Dye, Venus HT3, 3 port, 1000 lbs., 50 PSI, 1999, updated Recore controls, 2014-15 3 Gaston Futura, 2 port, 1000 lbs., 53 psi, Barco controls, 1987 1 Gaston Futura Jet Dye, single tube, 160 lbs,, 1992, M3000 controller 4 Recore Dye Machine Controllers, 2012-14 6 Then Airflow, 1200 lbs., 3 strand/3 ports, 1988 1 Then Airflow, 400 lbs., 1 port, 1987 3 Arganthan Jet Dye, 80 lbs. each, 60 PSI, 1982-80 1 Arganthan Jet Dye, 400 lbs., 60 PSI, 1982 11 Arganthan Jet Dye, 4 ports, 1000 lbs., 60 PSI, 1980 7 Gaston 824 Jet Dye, 5-3 port, 2-2 port 200 Stainless Mixing Tanks with mixers, 50 to 250 gal. 200 Dyehouse Trucks, 72" x 42" wide x 35" dp. FINISHING 1 Santex Santastrech Plus 120, 48" wide, 120 cm, balloon extractor, 5 to 60 YPM, 1994 1 Santex SANTASHRINK Dryer, 220 cm wide, with pin tenter entry, 1994, 6K/220 Gas IR SRS + SPR+FOUL+CUT, gas fired, 6 chambers, 2400 lbs./hour evaporation capacity, 6.1 mil BTU/HR 1 TubeTex Dryer #6 gas fired drum, entry with 3- Fabcon Padders 1 Bianco Slitter, 86" wide, Bianco slitter head (updated 2015), rope squeeze, detwister, folder, stainless steel 1 Bianco Slitter, 86" wide, opener and detwister, 2 scrolled rolls, flat folder 1 Stentex Tenter Stentotherm 3300, 1995, 2400 mm max. working width, unwind, J box, Dogal uncurler, 2 Santex Padders, 102" wide, Bianco Weft Straightner, E & L guiders, low profile gas fired 12 zones, 1 Krantz Syncro Shrink Conveyor Dryer, 100" wide belt 2 Famatex Tenter #1 & #2 3 Tube Tex Drum Dryers, 48" wide & 72" wide 1 Fabcon Drum Dryer, 8 zone 5 Tubular Inspection machines 6 6 Fabcon Tubular Gullwing Tubular Compactors, 52" wide Fabcon & Tubetex Tubular Calendars, 50" & 60" wide 1 Argathen Bleach Range, 10 section, 2200 lbs. hour. 1 Jemco Bleach Range, Model III 2000 CBR, 2,000 lbs. hour, 1995 1 Curtis & Marble, plastic roll wrapping 1 Bespoke Dye Mixing System, Year 2000, 16 pumps, 2 Model SRD Exact Weigh liquid chemical collecting, mixing, batch weighing, 2 IR dual head centrifugal pump, Mettler intergrated scale 1 Tube Tex, drum dryer 1999, with 3 Tube Tex tubular padders 1 1 Monforts Knitgoods Toptex 92" wide, open width rubber belt compactor, Kombi Batcher, steam heated main cylinder, 1990 Fabcon Open Pin Tenter, 90" wide x 20' long, steaming section, batcher 1 LABORATORY: Raitech Quickwash, DataColor 500, Milnor Washer, Huebsch Dryer 50 lb., PLUS MANY MORE ITEMS 25 Merrow Sewing Machines, with table and motor 2 Gardner Denver Air Compressor, 60 HP 1 Gardner Denver Air Compressor, 200 HP 3 Ingersoll-Rand Screw Compressor, 2- 250 HP, 1-150 HP 3 Propane Storage Tanks, 30,000 gallon, with mixer 4 Stainless Steel Outside Tanks, 6000 gal to 10,000 gal. 3 Waste Balers, vertical style 2 Cleaver Brooks Package Boilers, 800 HP, 1988 + 1989, dearator system PLEASE CONTACT US FOR FURTHER INFORMATION .

AUTOMATIC SHEETS STORAGE SYSTEM MATTER SRL MAT 00.6


Qty. 1 Second-hand automatic sheets (pallets) storage system Mfc.: MATTER S.R.L Built: 2002 Model: Mat 00.6 Number of Automatic Retrieval Cars: 2 Number of drawers: 756 Pallets Dimension of Pallets: Width: 1000/1500 mm / Length: 2000/4000 mm / Height: 250 mm Max. Pallet Weight: Max: 3000 kg Maximum speed of Retrieval Cars: Y Axis: 11 m/min . / X Axis: 58 m/min. / Z Axis: 20 m/min. System is working with Picking Station for separating and handling of pallets Dimensions of the system: Length: 74 meters x Width: 9.40 Meters (not including the picking station) X Height: 9.6 meters ( 9 rows )

CNC Laser Cutting Machines Trumpf TruMatic 3000 fiber (K04)


OVERVIEW: Brand: Trumpf Model: TruMatic 3000 fiber (K04) Application type: Laser Cutting Machine type: Laser Punch Combination Machine Availability: September Construction year: 2011 Production hours: 34000 Laser hours: 33000 Location: Spain MAIN DRIVE: Laser power: 3000 kW Punching force: 165 kN CONTROL UNIT: Brand: Siemens MOVEMENT: X-AXIS: Movement: 2500 mm Y-AXIS: Movement: 1250 mm WORKPIECE: Workpiece weight: 120 kg MAX MATERIAL THICKNESS: Steel: 4 mm ADDITIONAL EQUIPMENT: 1 - MultiTool function 2 - MultiBend function 3 - Thread shaped function 4 - Fast marking / grooving function 5 - Function roller technology and deburring 6 - Additional clamping claw 7 - Repositioning cylinder with moving parts in height 8 - Small parts sensor for ramp evacuation 9 - Mounting on mattress 10 - Chip conveyor with folding tank 11 - Deformed sheet metal detection 12 - Teleservice via and modem 13 - SheetMaster (2500 x 1250) 14 - Off / Load parallel to the main time 15 - Sheet separation system incl. Positioning help for medium format (2500 x 1250) 16 - Suction cup frame 17 - Disp. Load control 18 - GripMaster (2500 x 1250) 19 - SortMaster Pallet (6 transversal Pallets x = 1200 mm, y = 800 mm) 20 - Double trolley load incl. connection with warehouse 21 - 18 RTC cassettes incl. Matrix plate 22 - QuickSet 23 - Conveyor belt parts 24 - TruTops Punch License 25 - Includes € 40,000 in tooling

Laser Cutting Machines Trumpf TruMatic 3000 fiber (K04)


OVERVIEW: Brand: Trumpf Model: TruMatic 3000 fiber (K04) Application type: Laser Cutting Machine type: Laser Punch Combination Machine Availability: September Construction year: 2011 Production hours: 34000 Laser hours: 33000 Location: Spain MAIN DRIVE: Laser power: 3000 kW Punching force: 165 kN CONTROL UNIT: Brand: Siemens MOVEMENT: X-AXIS: Movement: 2500 mm Y-AXIS: Movement: 1250 mm WORKPIECE: Workpiece weight: 120 kg MAX MATERIAL THICKNESS: Steel: 4 mm ADDITIONAL EQUIPMENT: 1 - MultiTool function 2 - MultiBend function 3 - Thread shaped function 4 - Fast marking / grooving function 5 - Function roller technology and deburring 6 - Additional clamping claw 7 - Repositioning cylinder with moving parts in height 8 - Small parts sensor for ramp evacuation 9 - Mounting on mattress 10 - Chip conveyor with folding tank 11 - Deformed sheet metal detection 12 - Teleservice via and modem 13 - SheetMaster (2500 x 1250) 14 - Off / Load parallel to the main time 15 - Sheet separation system incl. Positioning help for medium format (2500 x 1250) 16 - Suction cup frame 17 - Disp. Load control 18 - GripMaster (2500 x 1250) 19 - SortMaster Pallet (6 transversal Pallets x = 1200 mm, y = 800 mm) 20 - Double trolley load incl. connection with warehouse 21 - 18 RTC cassettes incl. Matrix plate 22 - QuickSet 23 - Conveyor belt parts 24 - TruTops Punch License 25 - Includes € 40,000 in tooling

Fermenting Tanks Vertical CCT 10 x 2650 hl Hinke kft, Hungary 2650 hl / 2500 hl - NH3


Fermenting Tanks Vertical CCT Hinke 10 x 2650 hl - NH3 Tanks are made by Hungarian Hinke kft in year 1995-2000. They are made of stainless steel, self-standing (with legs) PU foam insulated and cooled with direct ammonia evaporation and they have 4 + 1 (cone) cooling zones. Operation control with Siemens S7 200 PLC with InTouch based on System Platform. We have 10 identical tanks, all equipment with CIP bowl, legs, service platform, vacuum and overpressure safety valves. Tanks are in good condition. Technical data: Volume Gross 2650 hl, net 2500 hl Made by Hinke kft, Manufacturing year 1995 Number of tanks 10 Pressure 1.0 bar Insulation PUR foam 150 mm Cooling media Direct NH3 Number of cooling zones 4 + 1 (cooled cone) Diameter 4500 mm (4800 with insulation) Height 22480 (without legs) Weight 24400 kg

Numerically Controlled Machining Centres BIESSE ROVER C6.65R


Machining centre Biesse Modello Rover C6.65 R Software BIESSE WORKS Working field X mm 6200 Working field Y mm 1535 Working field Z mm 250 Work table with automatic adjustment of bars supports and sucker holder carriages 08 working areas 10 bar supports with 4 sucker holder carriages 40 Uniclamp sucker holder carriages Suction cups included: 06 of mm 140x75 20 of mm 140x140 10 of mm 140x55 18 Fittings blocks 01 Electro-spindle at 4 axels of 12 kW 01 boring head 22 spindles composed by 13 vertical spindle + horizontal spindle + 1 blade 03 Multi-function heads composed by: 01 Saw blade unit diameter mm 300 01 Boring unit at 6 counterposed bits 01 Milling unit at 2 exits Automatic chain Tool change at 22 positions installed on the machine Depression plant with vacuum pump of 250 m3/h Automatic centralized lubrication Shaving evacuation belt

Bevarage filling plants TETRAPAK TBA 19


330 Prisma, in excellent condition 2006 model

Bevarage filling plants TETRAPAK TBA 19


TBA 19 250 PRISMA IN GOOD CONDITION

CNC Pressbrakes BYSTRONIC PR 150 IPC


Bending Length: 4100 mm System: MODEVA 12 6 axes: 590, 500, 250, 250, 150, 1000, 500 mm. Pressing force: 150 ton Stroke: 265 mm Daylight 550 mm. Closing speed: 200 mm/s Engine power: 11 Kw Electric voltage: 400 V Air Pressure: 8 bar

Chiller Cooling Stations YORK - GRAM York - Gram, 2 units cooling capacity 354 kW


YORK 708 kW Chiller Cooling Stations Liguid cooling compressor package which includes two idential units of York cooling compressors with all auxilliaries, electrical and control cabinets. This station was stopped in full operational condition in begining of year 2018 Both units include the following main equipment • Cooling compressor York HC 8125A with cooling capacity 354 kW • Plate Heat Excanger / Evaporator type M10 • Liquid separator GHEA • Oil separator Sabroe Techncial specifications of main equipment Cooling compressors Manufacturer: YORK – GRAM Compressor type 2 units of HC8125A Year 1999 Operating hours Approx 52000 / unit Refrigerant type R717 (NH3) Refrigerant capacity 30 kg / unit Number of units 2 Electic motor 2 x 110 kW Compressor speed 1 120 rpm Power supply 3x400 V/3/50 Hz Power steps 4 steps Cooling Capacity 708 kW Evaporation temperature -12C Condensation temperature +36C Secondary reagent Water / Glycol Concentration 25-30% Reagent incoming temp -2C Reagent exit temp -8C ALFA LAVAL plate heat exchanger for YORK station Manufacturer: Alfa Laval Manufacturer’s type: M10 – BWFDR Manufacturing year: 1999 Capacity: 43,5 Liter Pressure 25,00 bar Operating temp. 20/120 C // - 10/70 C Technical condition: Liquid Separator Manufacturer: GHEA Manufacturer’s type: 0519R Year 1999 Capacity 425 liter Working Temp. Min -40/Max - 50C Working pressure 28,6 bar Oil Separator Manufacturer SABROE Refrigerant. Type OVUR 4107 D Year: 2000 Operating pressure 26,00 Bar

Chiller Cooling Stations YORK - GRAM x 354 kW York HC 8125A


YORK 2 x 354 kW Chiller Cooling Stations Station has two idential units of York cooling compressors with all auxilliaries, electrical and control cabinets. Both units were stopped in full operational condition in begining of year 2018 Both units include the following main equipment • Cooling compressor York HC 8125A with cooling capacity 354 kW • Plate Heat Excanger / Evaporator type M10 • Liquid separator GHEA • Oil separator Sabroe

POWDER STRIP COATING LINE OTEFAL, GEMA 800-1500 MM - 0.8-2.0 MM THICK


Qty. 1 Second-hand Powder coil coating line on aluminium strip 1500 mm wide Mfc.: TBA Built: 1991 Coating thickness: 60 microns Revamped by OTEFAL in 2003 Powder booth changed in 2011 – GEMA Coil coater for the pre-treatment changed in 2013 Degrea ...

Final packaging machines ULMA ULMA NEVADA


ULMA NEVADA FLOW WRAPPER High speed machine Ideal for cheese or vegetables but would be suitable for a variety of products Infeed and outfeed conveyors All s/s Recently in production

REBAR PRODUCTION LINE WOOJIN, HAEDUCK, KUANGNAM D10 - D32


Qty. 1 Second-hand rebar production line Mfc.: Woojin, Haeduck, Kuangnam, Built: 2-2001 Revamped in 2005 & 2009 Dismantled in 10/2014 – 2/2015 Currently in warehouse Entry Material – Billet: 120 sq.x 3,000 mm & 125sq. × 3,000 mm. Exit Material: D1 ...

Deutz TCG 2032V16


Generator Deutz TCG 2032V16 of 3720 Kw serial N° 226014 YOM 2005 with 45,000 hours run, Alternator AVK Gas train Horizontal radiator HT / Horizontal radiators BT Transformer Areva of 4.500 Kva Muffler and 1 boiler Control and command panel Compresso ...

Bevarage filling plants Jawo Tech Triblock 32-32-8


Triblok for PET botles Able to fill beverages like: water, carbonated or noncarbonated drinks Capacity 6000 bph (1.5 liters) Including: - 32 rinser heads - 32 filling heads - 8 capping heads (arol capping machine) Machine not finished yet.  ...

Spiral freezer Reco 400mm


spiral belt stainless steel with 8 tiers nett belt width ± 400 mm belt Intralox belt length : ± 80 m dimensions (l x w x h) : ± 5.400 x 4.450 x 2.700 mm motor compressor and evaporator included does not include any insulations panels

spiral freezer Reco 200mm


spiral belt stainless steel with 14 tiers nett belt width ± 200 mm belt Intralox motor compressor and evaporator included does not include any insulations panels

Stretch Blow Machine KOSME KSB 8 L 10.000 bph Kosme GmbH KSB 8 Linear


Stretch Blow Machine KOSME KSB 8 L cap 10 000 bph Very good condition recently dismantled PET bottle stretch blow machine KOSME KSB 8 L, manufacturing your 2007. Delivery includes preform orientation conveyor but preform container tipper, elevator and ...

Liquid Chiller GEA Grasso FX 2800 / S - 2.800 kW GEA Grasso GmbH Grasso FX VP 2800 / S - R717


Liquid Chiller GEA Grasso FX 2800 / s - 2 x 2800 kW Two GEA Grasso FX PV 2800 S - screw type liquid chiller compressors were installed in 2003 (made in 2002) and they still installed and in very good working condition. The compressors have flooded evap ...

Evaporative Condenser BAC VXC 1240 BAC France VXC 1240 - R717 - 4984 kW


Evaporative Condenser BAC VXC 1240 - 4984 kW This evaporative refrigerant (NH3) condenser was delivered by BAC France in 2009 but it was never installed. This unit has four separate forced draught, curved plate and belt driven centrifugal fans which ar ...

Machining Center Traub TVC 200P


1995 machine CE 400x280x400 races ISO 40 16 tool places 8000 rpm rapid 30 m / min Power 5 Kw CNC Fanuc 0-M evacuator chips equipment in top condition

Autoplaten / Die cutter Bobst SP1420E


Autoplaten/die cutter Bobst Model SP1420E Year 1969 Sheet size 500x700 - 1020x1420 mm Substrates 200 grams till 5 mm thickness (board up to 3 mm) Diecuting power 600 tons Max mech. speed 4.500 sheets per hour Details with stripping station, elevat ...

Longitudinal Turning Machines (Lathes) TORNOS M 7 - 6 units


-6 off M7 (4 off with 13Y-3 spindle att.) - Serial no. 45717/65938/65940/65805(1 spindle + milling att.14DA,evacuation long part after milling)/85547(+ long part att.17ND)/96984(1 spindle + counter-thread cutter 12CB)- one machine equipped with gravity fe ...

Stretch Blow Machine KOSME KSB 8 L 10.000 bph Kosme GmbH KSB 8 Linear


Stretch Blow Machine KOSME KSB 8 L cap 10 000 bph Very good condition recently dismantled PET bottle stretch blow machine KOSME KSB 8 L, manufacturing your 2007. Delivery includes preform orientation conveyor but preform container tipper, elevator and ...

Liquid Chiller GEA Grasso FX 2800 / S - 2.800 kW GEA Grasso GmbH Grasso FX VP 2800 / S - R717


Liquid Chiller GEA Grasso FX 2800 / s - 2 x 2800 kW Two GEA Grasso FX PV 2800 S - screw type liquid chiller compressors were installed in 2003 (made in 2002) and they still installed and in very good working condition. The compressors have flooded evap ...

Evaporative Condenser BAC VXC 1240 BAC France VXC 1240 - R717 - 4984 kW


Evaporative Condenser BAC VXC 1240 - 4984 kW This evaporative refrigerant (NH3) condenser was delivered by BAC France in 2009 but it was never installed. This unit has four separate forced draught, curved plate and belt driven centrifugal fans which ar ...

Switchgear AREVA RMU 12kV 630kVA AREVA Schneider 12kV 630Amp


We have for sale: 2 AREVA switchgeaar 12kV 630Amp busbar 2 x incoming loadbreak switch 1 x Breaker feeder

Stretch Blow Machine KOSME KSB 8 L 10.000 bph Kosme GmbH KSB 8 Linear


Stretch Blow Machine KOSME KSB 8 L cap 10 000 bph Very good condition recently dismantled PET bottle stretch blow machine KOSME KSB 8 L, manufacturing your 2007. Delivery includes preform orientation conveyor but preform container tipper, elevator and ...

Liquid Chiller GEA Grasso FX 2800 / S - 2.800 kW GEA Grasso GmbH Grasso FX VP 2800 / S - R717


Liquid Chiller GEA Grasso FX 2800 / s - 2 x 2800 kW Two GEA Grasso FX PV 2800 S - screw type liquid chiller compressors were installed in 2003 (made in 2002) and they still installed and in very good working condition. The compressors have flooded evap ...

Evaporative Condenser BAC VXC 1240 BAC France VXC 1240 - R717 - 4984 kW


Evaporative Condenser BAC VXC 1240 - 4984 kW This evaporative refrigerant (NH3) condenser was delivered by BAC France in 2009 but it was never installed. This unit has four separate forced draught, curved plate and belt driven centrifugal fans which ar ...

Closing machines SASIB BEVARAGE SP 10


SASIB BEVARAGE ALIM CAPS TYPE: SP 10

Concrete pavers HESS Multimat RH 2000


HESS Multimat RH 2000 from 2003 incl. TEKA Batching Plant 1700 L. Package consist of: 2200 boards 1200 x 1170, Crane for mould change,ROTHO Shelf system 12 rows and 2500 capacity, 10 floor elevator system, 12 moulds, strapping machine ORGAPACK,Schindler  ...

Glycol water evaporator TRM


-

EXTRUSION PRESS - 1800 MT LINDEMANN 1800 MT - 7.5 - 193 MM


Qty. 1 Second-hand extrusion press including hydraulic unit & billet furnace Trade mark: Lindeman Type: back loading standard Original year: 1972 1rst revamping: by Omav in 1988 2nd revamping: by Clecim in 2003 3rd revamping: by Electric Sogema  ...

Sawing machine with automatic tape KASTO SSB 260 V


blade rotation motor power 4.0 kW 6.5 KW power of the drives AUTOMATIC FEED SIMPLE 600 mm ADVANCE MULTIPLE 5400 mm speed taglio15-125 mm continuously adjustable evacuator chips dimensions of 2160 mm overall length - 2080 mm width - altezza2015 mm  ...

NOVA FRIGO NOVA FRIGO P 105


NOVA FRIGO Type: P 105 Year: 1993 Cooling capacity: 122.1 kw 105000 frig / h Heating capacity: 152.7 kw 131300 kcal / h Installed power: 28.5 kw Compressor Power: 25.5 kw Gas: R407 C Weight of gas: 50 kg No fans Tank capacity: evaporator 610 lt  ...

Bevarage filling plants Tetra Pak A3 Speed


Fully Refurbished Tetra Pak Filling Machines A3 Speed 200 Slim, TBA 19 200 Slim.

Refrigerating machines profroid evap duo


Sell several models of evaporators double flow, gas R404A.

Refrigerating machines EVAPCO PMCQ-604


Sell condenser evaporatif Evapco, PMCQ-604 model in very good condition with 3 drives for fans. Power 1500KW

Production lines Heat & Control Potatos Chips line


Potatos chip line made by Heat&Control, delivered but never used, capacity 500 kg /h. Line also used for banana chips. Equipment Line 1) Conveyer table for product (1) 2) Elevators to banana cutter (2) 3) Banana Cutters (2) 4) Wash system f ...

Filling line for PET Krones Line


capacity: 22000 btl/h Product: beer Bottles 1,5; 2; 0,5 Line include: Preform feed system (elevator and feed system) PET bottle blowing machine Krones Contiform 21 Compressor Francois CE 68 Air conveyor Krones K 970-140 (70 meters) Krones Vari ...

Transformers 20 KV-400 KV


TRANSFORMER 20 KV-400 KV 35.000,00 € Power: 190 MVA Weight tot.: 199 Ton Weight Oil: 40 Ton Year: 1985 – Revamped in 1995 TRASFORMER 20 KV-400 KV 45.000,00 € Power: 190 MVA Weight tot.: 234Ton Weight Oil: 46 T ...

Refrigeration systems Bitzer 4G-20.2Y-40P


Refrigeration system Bitzer 4G-20.2Y-40P Nominal capacity: 24,7 kW (-25°C evaporating and +32°C condensing)for R404a Max. power input: 14,12 kW (-25°C evaporating and +32°C condensing)for R404a Displacement: 84,6 m3/h (Volume efficiency wg s?ownika)  ...

Refrigeration compressors Bitzer 4J-13.2Y


Semi-hermetic compressor Bitzer 4J-13.2Y Displacement: 63,5 m3/h Evaporating temperature range: -5°C to -40°C Motor voltage: 400V/3/50Hz Weight: 179 kg Number in stock: 2 Price: on request Used and refubrished Czamara company has more re ...

Refrigeration compressors Bitzer 4NCS 20.2


Semi-hermetic compressor Bitzer 4NCS 20.2 Displacement: 56,25 m3/h Evaporating temperature range: +0°C to -40°C Motor voltage: 400V/3/50Hz Weight: 150 kg Price: on request Used and refubrished Czamara company has more refrigeration Equipme ...

milling machine LAGUN GBM 31 ATC


Racing 3000x1200x1000 ISO 50 Automatic head 2.5 ° Tool changer 24 ps. Evacuator chips CNC HEIDENHAIN TNC 426

MULETTO B&B ELEVATORS ES RA 12/16-SP B18


FORKLIFT, reach, 12 QL, electric, ORANGE COLOUR Bed and breakfast 12/16 RA ES-SP ELEVATORS B18

Bevarage filling plants Tetra Pak and Others Tetra Therm Aseptic flex


Complete used UHT bottle filling,seamer and packer plant Brand name UHT plant is Tetra pak Brand Name : Manufacture of Year : 2004 The line is used to produce milk for cats and a milk drink for people. The entire production line is  ...

Swiss Combi Drum dryer Type 12


Drum drying plant for forage, grass, alfalfa. Water evaporation 12 t / h. With combined gas and coal dust burner and air scrubbers. Swiss Combi for forage pellets Pellet Press. Shredder for grass and Schnitzler for potatoes. Belt cooler, silo system, dosi ...
Get the latest machine offers by email: order newsletter