essor used for sale

Inert gas welding machine, arc welding system, MIG/MAG welding system -Manufacturer: Ess, inert gas welding machine MIG-MAG 520-2 MW -Type: 520-2MW -Max. Welding power: 500 A -Water cooled -Wire feed case: ESS DVK 17 -Dimensions: 1160/500/H1220 mm -Weight: 379 kg

Module converter, electronic module -Handover: in the current state as viewed -Electronic module: defective -Board type: ESS FE13-3 US4-1 -Dimensions: 260/180/H100 mm -Weight: 0.8 kg

Machine type: Fully automatic TIG welding system with turntable Manufacturer: ESS Model: 211 DTG / DT50 / PS 8 Year of construction: 1999 Condition: very good Type of offer: used machine Specifications: Control: Control unit: ESS PS 8, Pulse remote control FSP 100 Table: swivelling turntable Type: DT 50 Diameter: 300 mm Load: 50 kg Speed range: 0.43 – 13.0 rpm. Drive: 3 – 205 Amp. / 230 V, automatic ignition Remark: with three-jaw chuck and various accessories, Complete documentation The machine is in a very good and immediately ready condition and can be viewed and demonstrated with us. We would be pleased if you are interested in our offer. Subject to errors, changes and prior sale.

Container turning device, welding turning device, welding turning device, welding device, welding turning table, welding turning and tilting table, welding turning device, welding turning tilting table -Manufacturer: ESS, double welding turning device, swiveling -Turntable distance: 975 mm -Program control device: 2x ESS type PS 2-3 -Direction of rotation: right / left rotation -Welding smoke extraction pipe: without welding smoke filter, can be supplied at an extra charge -Dimensions: 2000/1400 / H1950 mm -Weight: 552 kg

Inert gas welding machine, arc welding system, MIG/MAG welding system -Manufacturer: Ess, inert gas welding machine MIG-MAG type 310 MW -Max. Welding power: 310 A -Water cooled -Wire feeder: ESS PS 12-8 -Accessories: including hose package, ground cable -Dimensions: 1020/480/H910 mm -Weight: 208 kg

Welding turntable ESS type DT 50 Fabr. No. 86 / 1125 Year of manufacture 1986 Load max. 50 kg Face plate diameter 300 mm Face plate speed 0.19 to 5.7 rpm. Control voltage 24 volts , motor power 100 watts , mains connection 220 volts, 50 Hz. - Face plate in the position, infinitely swivelling by 180 - speed control via rotary potentiometer - clockwise, clockwise rotation, foot switch - 2-stroke and 4-stroke operation - sliding contact for the mass up to 200 Amp. - new control ESS PS3 from 2009 Space requirement L x W x H 600 x 500 x 350 mm Weight 45 kg very good condition; used

ESS 220 WS Wig only suitable for aluminium as it is a pure verk-stream device Elktroden welding machine 230 and 400Volt possible Size 500 1000'700mm Technical data see pictures

DC TIG shielding gas - welding system Sweat strom_ 40 - 360 Amp. Incl. cooling system, ESS type: KG 1, good hose package, fitting, various new 2 mm needles, various new ceramic nozzles and rolling chassis. Power supply: 380 Volt, 32 Amp. Weight: approx. 120 kg. Freely loaded from stock. Good operational condition. Without bottle. The system can be inspected and tested under electricity and is immediately available. Shipping with forwarding agency possible by arrangement. Please also note my other entries.

MIG-MAG Impulse welding machine make ESS type Transmig 401Machine -No: 06880396 Year 1996Power range: 40 - 400 A100% ED at: 360 A80% ED at: 400 AWith- separate wire feeder type DVK 11- water cooled- Hose package with burnerused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Portable TIG welder make ESS type 160 DTGMasch. -No: 0498036 Year 1998 for DC-TIG and electrode weldingAdjustment range: 5 - 160 A50% ED at: 160 A60% ED at: 145 A100% ED at: 110 AIdling speed: 100 VStick electrode: 1.5 - 3.25 mmWeight approx: 13.5 kgOutside dimensions approx: 340 x 210 x 360 mmWith- TIG hose package with burner- Ground cable- Pressure reducerlittle used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

TIG welding machine make ESS type Uniarc 5Machine -No: 0290650 Year 1990Max. Power: 210AED at 210 A: 35%ED at 160 A: 60%ED at 130 A: 100%External dimensions approx: 600 x 900 x 850 mmWith- mobile- 5.0 m hose package with TIG torch- Ground cable with ferrule- Gas hose with pressure gauge- Foot remote controlused, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Amperage range maximum: 300 A Amperage range minimum: 240 A Welding machineESS - SynMag 4000 MACH-ID 7643 Make: ESS Type: SynMag 4000 Year: 2008  Rated power 60 %:300 Rater power 100 %:240 Imput:           400A Length:          900mm Width:           600mm Height:          900mm Weight:          180kg

Inert gas welding device, arc welding system, MIG/MAG welding system -Scope of delivery: without wire feed unit with hose package, according to the pictures -Manufacturer: Ess, inert gas welding machine MIG-MAG 520 MW without wire feed -Type: 520-2MW -Max. Welding power: 500 A -Water-cooled -Dimensions: 1160/500/H810 mm -Weight: 303 kg

TIG welder, inverter welder, TIG welder, inverter welder -Manufacturer: Ess, TIG welder AC -Type: 130 TG -Voltage: 220V -incl.: ground cable, gas fitting, hose package -Welding power: max. 130 A, see type plate -Air-cooled -Dimension: 590/220/H400 mm -Weight: 56 kg

Wire feed case for inert gas welding device, shielding gas device, wire feed case -Manufacturer: Ess wire feed case, water-cooled -Type: DVK 300-3 -Accessories: hose package -Dimensions: 750/410/H430 mm -Weight: 32 kg

TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Ess, TIG and hand electrode welding machine, water-cooled -Type: THYROARC 3 AC/DC direct/alternating current -incl.: earth cable, gas valve, hose package 7500 mm long -Welding power: max. 280 A, see nameplate -Dimensions: 1300/570/H900 mm -Weight: 262 kg

TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Ess, TIG and hand electrode welding machine, water-cooled -Type: THYROTIG 250 -Welding power: max. 250 A, see nameplate -Accessories: incl. hose package, ground cable see photos -Dimension: 1180/675/H900 mm -Weight: 264 kg

TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Ess, TIG and hand electrode welding machine -Type: Squarearc 306 -Welding power: max. 300 A, see nameplate -Air cooled -Accessories: including hose package, ground cable, gas fitting see photos -Dimension: 820/440/H945 mm -Weight: 127 kg

TIG and Electric Inverter Welding Machine ESS Type Transtig 231 (DC) TIG Welding Machine Fabr. No. 0507214 Year of construction 2007 Power TIG 225 Amp. = 40% ED 180 Amp. = 60% ED 140 Amp. = 100% ED Power Electrode 180 Amp. = 50% ED Mains connection 400 Volt, 50 Hz. 16 Amp. Plug- DC welding machine - infinitely variable power adjustment - 2 stroke and 4 stroke operation - HF ignition - pulse welding mode- rod electrode operating mode- water-cooled - 8 meter TIG hose package with hand torch - inert gas pressure reducer - operating instructions space requirements L x W x H 1000 x 450 x 710 mm Weight 90 kg very good condition; used

TIG and Electric Inverter Welding Machine ESS Type 170 ATG (AC-DC) TIG Welding Machine Fabr. No. 0907036 Year of manufacture 2007 Power TIG 170 Amp. = 35% ED 130 Amp. = 60% ED 110 Amp. = 100% ED Power Electrode 140 Amp. = 35%ED Mains connection 230 Volt, 50 Hz. • DC and AC welding • HF ignition • Infinitely variable power adjustment • 2-stroke and 4-stroke welding operation • Pulse welding mode• Rod electrode operating mode• 8 meter hose package with TIG burner• Inert gas pressure reducer • Fan cooling • Portable Space requirement Welding machine L x W x H 400 x 270 x 500 mm Weight 26 kg very good condition; used

From insolvency: ESS Synmag 4000 Year of construction 2007 with feed case DVK 5000 with 5meter intermediate package 4 Roller drive Water cooling 2/4 stroke Welding range 40-400Ampere Duty cycle at 100% 240Ampere at 60% 300Ampere with 4meter burner, ground cable --without pressure reducer--

From operating resolution: ESS Squarearc 356 C Year of construction 2011 AC/DC Welding range 5-350 amps Pulse function HF Ignition Water cooling 350Amps at 60% ED complete, with 6meter burner, ground cable and pressure reducer Dimensions in mm approx. 980x450x930 --Very neat device-

From insolvency: ESS Pulsarc 350 Year of construction 2008 with feed case DVK 400 with 5meter intermediate package 4 Roller drive Water cooling 2/4 stroke Pulses Welding range 40-350Ampere Duty cycle at 100% 300Ampere at 60% 350Ampere with 4meter torch, ground cable and a roll of Drahr 1.0mm----without pressure reducer

- Adjustment range: 3 - 225 A - TIG open circuit voltage: 90 V - Total power: 6.5 kW - Machine weight: 84 kg - Space requirements (W x D x H): 0.83 x 0.46 x 0.64 m Details with cooling, additional foot switch Accessories Documentation, ground cables

TIG welding machine, welding machine, TIG welding machine -TIG welding machine: AC direct current -Hose package: 1 -with accessories: gas nozzles, needles, mixing nozzles, ceramic nozzle shells ... -Max. Welding power: 220 A. -Air cooled -Incl. Ground cable -Gas valve -Dimensions: 870/455/H665 mm -Weight: 112 kg

Inert gas welding machine, arc welding system, MIG/MAG welding system -Max. Welding power: 320 A. -4 roller drive -Water-cooled -Incl. Ground cable -with: removable wire feeder -Gas valve -Hose package -Also suitable for: robots -Number: 2x devices available -Price: per piece -Dimensions: 1155/500/H1030 mm -Weight: 263 kg

Container turning device, welding turning device, welding turning device, welding device, welding turntable, welding turning and tilting table, welding turning device -Table is: tiltable -Clamping diameter: 450 mm -Center bore: Ø 62 mm -Drive: 0.2 kW -Speed: 0.08 - 2.4 rpm -Load: 120 kg -Control: PS3 -Footswitch -Dimensions: 800/460/H480 mm -Own weight: 112 kg

Container turning device, welding turning device, welding turning device, welding device, welding turning table, welding turning and tilting table, welding turning device -Table is: tiltable -Clamping diameter: 450 mm -Drive: 0.2 kW -Speed: 0.08 - 2.4 rpm -Load: 120 kg -Control: PS3E -Foot switch -Dimensions: 520/450/H475 mm -Own weight: 110 kg

Container turning device, welding turning device, welding turning device, welding device, welding turning table, welding turning and tilting table, welding turning device -Table: is tiltable -Load: 75 kg -Clamping diameter: 300 mm -Hollow shaft: Ø 42.5 mm -Drive: 0.1 kW -Speed: RPM -Number: 1x welding turning device available -Price: per piece -Dimensions: 830/450/H920 mm -Own weight: 174 kg

serial number: 0493373 ampere: 420 A water cooling unit: kW total power requirement: kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: welding device is defective max 300 A water-cooled Approx. Onsite Dimension. (l x w x h): 440 x 900 x 950 mm, weight approx.: 127 kg

Description: . weight approx.: 200 kg, Approx. Onsite Dimension. (l x w x h): 1,100 x 600 x 1,100 mm

Essilor SLE 60 slit lamp: -High quality slit lamp in excellent condition - Manufacturer: Essilor -Type: SLE 060 -Year of manufacture: 1999 Essilor AKE 500 Computer: - High quality keratometer in excellent condition - Manufacturer: Essilor -Type: AKL 001 / AKE 500 Refractive diopter meter: -Focus rangefinder focimeter Essilor LME 60 - Manufacturer: Essilor -Type: LME 60 Essilor diets hand grinder: - Manufacturer: Essilor FHG Heat Gun Frame Heater: - Manufacturer: Essilor -Type: FHG 001 N -Electrical data: 230 V, 51 Hz, 10 A UV tester: - Multifunctional anti-UV tester, matching lenses and for testing banknotes Essilor PD Meter - Manufacturer: Essilor -Digital CRP meter Motorized table -Adjustable height The devices are sold together! All devices are in good condition and can be tested and can be viewed on site.

SPECIFICATIONS: Automatic drilling and dowel insertion machine with horizontal loading and unloading system, consisting of: Loader: ESSEDUE CNC transverse drilling machine: Biesse FTT Year of construction 2003 4 upper drill heads with automatic change of vertical drills 2 X-axes 4 Y-axes 4 electrospindles with automatic tool change A total of 12 slots for tool changes Inline transverse plate turner for double-sided drilling CNC transverse drilling machine: Biesse FTT Year of construction 2004 2 upper drill heads with automatic change of vertical drills 1 X-axis 2 Y-axes Biesse FHT Transversal Drilling and Dowel Insertion Machine Year of construction 2004 High pressure bonding system: Csnpgoz93 5 + 5 injectors Large vibrating baskets with dowels ESSEDUE unloader with additional transverse outlet for individual panels

General SKU377S917 LocationBarneveld MakeNeumann & Esser TypeICM-15 No.02.300.0166 Main Features Motor7.5 KW Inlet diameter55 mm Specified Features - Classifier mill MaterialMild steel, Stainless steel Classifier Mills Grindercheck Rotor sizedia. 305 mm Grinding room sizedia. 320x70 mm With grinding trackcheck Housing dimensions dia. 315x70 mm InletDN 50 Feeding with rotating valvecheck Motor1,1 kW 380-420/660-690 Volt: 7,5 kW 380-420/660-690 Volt Information Year of construction2002 Floorspace1,25x0,85 m Total height1,4 m Weight750 kg Extra SpecificationsWith: Dosing airlock Dust collector Cyclone collector Ex barier valve TurbofanClassifier millsNeumann & EsserMills > Classifier millsBrand > Neumann & Esser What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worl ...

General SKU377S919 LocationBarneveld MakeNeumann & Esser TypeICM-19 Main Features Motor12 KW Inlet diameter119 mm Specified Features - Classifier mill Grindercheck Rotor sizedia. 305 mm Grinding room sizedia. 320x70 mm With grinding trackcheck Housing dimensions dia. 315x70 mm Inletdia. 119 mm Feeding with rotating valvecheck Motor1,1 kW 380-420/660-690 Volt: 12 kW 380-420/660-690 Volt Classifier Mills MaterialMild steel, Stainless steel Information Floorspace1,45x0,85 m Total height1,4 m Weight750 kg Extra SpecificationsWith: Dosing airlock Dust collector Cyclone collector Ex barier valve TurbofanClassifier millsNeumann & EsserMills > Classifier millsBrand > Neumann & Esser What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect t ...

Complete Printshop package: HP DesignJet T7100PS (42 ", 1067 mm) 3 roll feed plotter Printing capacity 9,490 m² see usage report HP DesignJet T7200 (42 ", 1067 mm) 3 roll-fed plotter Printing capacity 74,460 m² see usage report HP DesignJet Z6800 (60 ", 1520 mm) overhauled plotter Printing capacity 1,195 m² see usage report HP PageWide E77660 (50/70 ppm) with finisher (Punsh, Staples) Printer Printing capacity 258,424 (total) see consumption page HP LaserJet 4050 TN (3 trays paper feed) Printer DYMO LabelWriter 310 Printer Konica C754 (1 underfeed bin) Printer including toner (x8) € 25.00 each EFI Model: Color Profiler Spectrometer ES-1000 Spectrometer HP Sanner 4520 (42") scanner Avision AV 220 C2 A4 scanner Avision FB 2080E Scanner A3 Rowe 721-1 (folding width 96 cm) including cross folding Folding machine P ...

Stainless steel mixing tank with liftable, heated lid. Manufacturer: Essiccatore Granplast Type: AS2 Dimensions: 800 x 950 x 1900 mm Tank size: diameter 800 x 200 mm

Bindemaschine - Binding machine Esselte 3000 -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-

General SKU377S918 LocationBarneveld MakeNeimann & Esse GmbH TypeICM-19 No.702331 Main Features Motor15 KW Inlet diameter119 mm Specified Features - Classifier mill Grindercheck Rotor sizedia. 305 mm Grinding room sizedia. 320x100 mm Without sieve cagecheck Housing dimensions dia. 315x70 mm Inletdia. 119 mm Feeding with rotating valvecheck Motor15 kW 380/420 Volt, 1,1 kW 380/420 Volt Classifier Mills MaterialMild steel, Stainless steel 1.4301 (304) Information Year of construction2006 With switchgearas is Floorspace1,3x0,8 m Total height1,6 m Weight1650 kg Extra SpecificationsWith: Dosing airlock: NEA RAL 125/12/0,526 PSR 11, 0,55 kW, Dust collector Cyclone collector NEA CAR P 19-178/397 Air intake coller: airflow: 19 m³/min, air in: 35 °C at 60 % rel. humidity, air out: 11 °C at 100% rel. humidity, water in/out: 8°C / 11 °C Ex barier valve TurbofanC ...

Esseteam/maxima Work Center With Two 1500mm Tables Tool Holder With 12 Pieces Vertical Drilling Group With 18 Drills / Horizontal With 8 Drills, Two Tupias, Engine With Circular Saw And Drill With 360 Rotation.

Powerful rough terrain forklift from Esslingen (today Still) Has been restored before. Good condition. At call. Robust engine from Mercedes-Benz (OM314 3.8l diesel) known from the Unimog or LP808 Battery a bit weak at the moment, Engine + Hydrostat Top! Fork length 130cm Lifting height 3.3m Lifting capacity 3t Curb weight approx. 4.5t The truck can be viewed at any time. Several available. Take a look at our other listings. Transport possible throughout Europe If you have any questions, just write or call Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg Tel. 016096679844

Description: ESSEPIGI MODULA 300 Drilling and Dowel Inserting Machine Approx. Onsite Dimension. (l x w x h): 1,260 x 1,400 x 2,000 mm, weight approx.: 1,200 kg

Description: ESSETEAM SPRINT B12 CNC Machining Centre Working range of the X axis: 3000 mm Y axis useful working range: 1000 mm Maximum piece thickness (with movable shelves or Bakelite top): 120 mm Maximum piece thickness (with rexilon top): 200 mm X axis travel: 3350 mm Y axis travel: 1550 mm Z axis travel (with moving floors or Bakelite top): 200 mm Z axis travel (with rexilon table): 280 mm Maximum speed in X axis: 85 Maximum speed in Y axis: 85 Maximum speed in Z axis: 25 Worktop height: 920 mm Static frequency converter: 7.5 kW Installed electrical power: 20 kW Suction mouth diameter: 180 mm Minimum suction speed: 30m/s serial number: 95,120,038, Approx. Onsite Dimension. (l x w x h): 6,000 x 3,650 x 2,000 mm, weight approx.: 4,500 kg

Suction slot duct system for passenger cars and trucks, exhaust extraction duct unit Npnfl Complete system with suction duct, trolley, suction hose, suction blower. Length approx. 20m, 3 suction hoses Aspirator

Working range X mm: 7200 Working area Y mm: 2010 Working area Z mm: 300 No. 2 working areas mm: 2700 x 1500 Main motor kW: 11 Tool change stations 12 Machine table: console table Speed max rpm: 18000 Tool clamping system: HSK 63F Number of consoles 8 Vacuum pump: Yes Total connection kW: 78 Weight Kg: 12,300