espe used for sale

ESPERA fully automatic weight and price labellers ESPERA LABELLER labeller

This ESPE CTO 250/4000N Bending machine was manufactured in the year 1995 in Czech Republic. The pression force of this machine is 250 T.

Hydraulic guillotine for cutting sheet metal by ESPE Strojarne Piesok, type CNTA, 3150 mm x 6.3 mm (ST40). The machine has a variable knife gap and a hydraulically variable knife angle of 1 -2.5 degrees, set from the desktop. 11 kW motor. Machine weight 7 tons. Bumper departure 950 mm. Electrically adjustable cutting length in the range of 10-3150 mm. 2 supports to hold sheets of metal at the front of the machine, plus a ruler for cutting at a 90-degree angle. Light line enabling line cutting. Original O&M documentation and occupational health and safety manual in Polish. The machine is designed for continuous operation - 3 shifts.

Key data: 315 t

Inv. Num. : 4650 Type: LODD 315 Producer: ESPE Created: 1996 Parameters: Compressive force: 315 t Maximum bending length: 4000 mm Machine height: 4150 mm Machine length: 4000 mm Machine width: 2200 mm Machine weight: 33 t Equipment: Tools

Year 1996, CE norm, complete instructions, control Delem, machine in TOP condition with warranty, more details on request

Espec Temperature Shock Chamber Here we offer you an Espec temperature shock chamber. Thermal shock environmental chamber (cold load: -65° to 0°C). Conventional thermal shock chambers with three zones can be quite large, since three separate chambers are used. The TSA series has only one chamber, which significantly reduces its size. Instead, it circulates cold, hot or ambient air as needed. The air-conditioned air can be pre-cooled or preheated beyond the setpoint, allowing for faster recovery of the desired state after transmission. Espec Temperature Shock Chamber Water Cooled TSA-201S SN: 153000154 Hot chamber: +60 to 200°C Cold chamber: -70 to 0°C Working temperature: 0-40°C System: Two zones or three zones test by flap switching Achievement: Test area: High temperature. Exposure range: +60 to +200°C Low temperature. Exposure range: –70 to 0°C Temperature fluctu ...

ESPERA ES 7000 ID.NO. 2106 Espera ES 7000 labeler over + below and extra labeler. Year against 2004. Dimensions 235 x 80 cm H 185 cm.

Counting scales, scales, parcel scales, weighing platform without terminal, operating unit, display, evaluation device -Weighing platform without: evaluation device for scales -Weighing range: min.0.02 kg -Weighing range: max. 12 kg -Number: 1x available -Dimensions: 330/235/H90 mm -Own weight: 4.7 kg

Top used ESPERA labeling machine ES 5000

Espec PR-3KP Climatic Test Chamber -20 to +100 °C Characteristics: Manufacturer: Espec Type: PR-3KP Temperature range: -20 to +100 °C Humidity: 20 to 98% RH Refrigerant R-404A:- CFC-free – ozone-friendly Hours: 56530 Metrics: External dimensions: HxWxD= 1680 x 1050 x 1200 mm Chamber dimensions: HxWxD= 850 x 600 x 800 mm More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

Machine number: 91 B 3576

Properties: Used foil welding machine of the manufacturer Italdibipack Angle welder with shrink tunnel Condition: fully functional with signs of use Ideal for fast material transport Expertly dismantled and packaged Specifications: Total length: 2,200 mm Total width: 850 mm Total height: 1.500mm Shrink tunnel length: approx. 700mm Working height: 930mm film width: 600mm Weight machine: 270Kg Rated power: 5Kw Year of construction: 2012 Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt tracks, inclined conveyors or telescopes for loading and unloading your goods! We are happy to prepare your individual offer or advise you on the conception or assembly questions. Simply let us know your needs and local conditions. Take advantage of our many years of experience and our excellent network of professionals ...

Year: ca. 1988 plate thickness: bei Stahl max. 3,3 mm table:: 1100 x 700 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I sell italdibipack angular cellophaning machine also for large formats Thermoretractable

Working height (on stand): 930mm, tunnel entrance dimensions: 450mm/230mm, tunnel length: 700mm, sealing range: 500mm/400mm. Weight: 270kg, dimensions X/Y/Z: 2200mm/850mm/1500mm.

diameter: mm Cutting (quantity): 0 weight: kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number 56 positions

pressure: 100 t throat: 260 mm stroke: 300 mm table-size: 500 x 500 mm ram head dimension: 650 x 500 mm dayligth: 700 mm oil volume: 600 l capacity of ejector in table: 40 t return capacity: 13 t total power requirement: 22 kW weight of the machine ca.: 7 t dimensions of the machine ca.: 2.07 x 2.48 x 3.3 m - Ejector in the table, pressure 40 t, stroke 100 mm - Laterally movable work area protection with ESPE (light barrier) this with cycle operation - Cooling, behind the machine, backwater boiler (beige) air cooler (grey- blue), along with complete piping and control etc. - Press safe for unrestricted manual insertion operation - Documentation in german available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cat.-Nr. 09-2900-2 in a very good condition for Ketchup, Mayonnaise, Dressing, Mustard In the industrial production of salad dressings, and mayonnaise, you will achieve optimum quality and maximum performance. The entire process plant is built compact and on a central base frame, and this allows easy transportation, quick installation and commissioning. Low Commissioning Cost Plant design ensures smooth production of your products The plant is quickly ready for operation Standardised Machines for best performance and value Our vacuum-process systems are designed to produce products such as Mayo, Ketchup, dressing, sauces, etc. The products can be produced in hot and cold method, also according to customer requirements. The product heating, and cooling is via a double jacket with insulation. The optional direct steam injection is used for rapid product heating, for ...

Cat.-Nr. 09-2900-1 in a very good condition for Ketchup, Mayonnaise, Dressing, Mustard In the industrial production of salad dressings, and mayonnaise, you will achieve optimum quality and maximum performance. The entire process plant is built compact and on a central base frame, and this allows easy transportation, quick installation and commissioning. Low Commissioning Cost Plant design ensures smooth production of your products The plant is quickly ready for operation Standardised Machines for best performance and value Our vacuum-process systems are designed to produce products such as Mayo, Ketchup, dressing, sauces, etc. The products can be produced in hot and cold method, also according to customer requirements. The product heating, and cooling is via a double jacket with insulation. The optional direct steam injection is used for rapid product heating, for ...

C-Module AUSTRIA ERICH PETER MASCHINEN-PLANTS GMBH A - 7083 Purbach - Austria office@machines-plants.at www.machines-plants.at Affordable housing, affordable houses, Hotels - Residential complexes - Residential complexes - Detached houses - cheap houses we have sold our used ones, we also offer NEW C-Module 3000 mm x 6000 mm NEW FORMEN Cheap houses - cheap apartments I am proud to introduce you to our improved system for building affordable homes. Especially for villages and small towns. But hotels have already been built in this way - we can do all the planning for them. A useful system also for stairwells, corridors and elevator shafts - easy to manufacture. It is a modular system, but still flexible in the size of the room and in the positioning of the windows and doors. Connecting to other materials such as wood, glass and concrete slab is easy. Th ...

From the current promotion we offer cheap 20ft first trip containers! Sea containers are extremely stable and are made of 2mm-sifted rust-coated Corten steel, which is also coated with saltwater-resistant ship paint. They have a reinforced forklift-passable floor, which is covered with 28mm waterproof plywood panels made of hardwood. 20 feet (6m) of sea containers have two forklift pockets incorporated into the floor scaffolding and can therefore be easily lifted and implemented without damage by means of forklifts, i.e. no crane is required for lifting. Due to their massive and weather-resistant design and the fact that sea containers are manufactured according to ISO and CSC standards, they are perfectly suited as storage, material or workshop containers and can be sold again, especially after many years of use, almost without any loss of value. TECHNICAL DATA / TECHNICA ...

We have 500 kg Schraubnaegel, nails, screws, deck pencils on camp. are used, above all, in carpentries and in the palette construction. -for especially good hold. length 38 mms and 68 mms also to sell kilo way with questions all around the nails we stand to you with pleasure any time under the telephone number 09945 417 or by e-mail: autoteilekollmer@t on-line at the possession.

1 high quality, factory-tested, well preserved double girder crane especially suitable for the Coilumschlag Load approx. 80,000/32,000 kg Wingspan approx. 25,600 mm Hook way approx. 8,500/13,500 mm Make SIEMAG/SIEMENS Overhaul and rebuild/workshop test 2009/2016 Trolley in robust wind plant design, between the crane bridge catwalk one-sided lowered to optimize the installation height, cabin control (expandable easily on radio), operating speeds: Main hoist 80 t to approx. 4.25 m / min auxiliary hoist 32 t up to approx. 10.8 m / min Katz LG 32/80 t Max approx. 40.0/20,0 m / min Crane chassis 32/80 t Max 80.0/40.0 m / min

Etikettierer (semiautomaton) to application of round etiquettes 230 V of connection / air pressure inevitably an easy service / quick arrangement this Etikettierer is suitable especially for smaller production loose dimensions. further information on inquiry

Specifications / Technical data S-1400/T 3-axis CNC-portal-machine and engraving machine (Attention: Pictures show the High-Z S-1400 with trapezoidal thread spindles, this differs exclusively by the spindles . With the T-variant of the high-Z CNC fraes machine, you acquire old-fashioned technology with the certain I-meat in TUeV-certified quality (EMC). The High-Z/T is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. Through the ball-circulation spindles used, the High-Z/T portalfraes machine achieves fantastic accuracy and an almost unmeasurable reverse play of about 0.01mm. At the same time, high travel speeds of up to approx. 108mm / second ( 6500 mm / minute ) can be achieved. This means engraving and fraes speeds of up to approx. 4500mm/min can be realized and urgent journeys up to approx. 7000mm/min. Here you can s ...

Specifications / Technical Data S-1400/T CNC-Router and CNC-Engraver / Engraving Machine (Attention: Pictures are showing the type with trapezium spindles, thats the only different to the t-series ) With the purchase of the T-variation of High-Z CNC-router you get a proven technology with a certain icing of the cake in TÜV-certified quality. High-Z/T cnc-routers are conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T cnc-machines achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this 3D-cnc-machine you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on ...

Specifications / Technical data S-1000/T Portalfraesmaschine / Engraving machine With the T-variant of the High-Z CNC-Fraese you acquire old-fashioned technology with the certain i-tuepfelchen in TUeV-certified quality (Emc). The High-Z/T Fraese is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. Through the ball-circuit spindles used, the High-Z/T achieves fantastic accuracy and an almost unmeasurable reverse play of about 0.01mm. At the same time, high travel speeds of up to approx. 108mm / second ( 6500 mm / minute ) can be achieved. This is how engraving and fraes speeds of up to approx. 4500mm/min can be realized and urgent journeys up to approx. 7000mm/min. Here you can see a video about empty runs with the new high-Z/T 3D CNC machine. This makes this machine series in the industrial sector just as applicable for work ...

Etikettierer (semiautomaton) to application of etiquettes on all angular bundles and especially for the Nachlabeln of tubes suitably 230 V of connection / air pressure inevitably an easy service / quick arrangement this Etikettierer is suitable especially for smaller production loose dimensions. further information on inquiry

Specifications / Technical Data S-1000/T CNC-Router / CNC-Engraver With the purchase of the T-variation of High-Z CNC-router you get a proven technology with a certain icing of the cake in TÜV-certified quality. High-Z/T was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T CNC-engraver achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machine you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This cnc-router series is usable in the industrial field as well as for works like engraving, milling, dr ...

Specifications / Technical Data S-720/T CNC-Fraesmaschine und Graviermaschine / Fraese With the T-variant of the High-Z CNC Fraes.-and engraving machine you acquire old-fashioned technology with the certain i-Tpuelchen in TUeV-certified quality (EMC). The High-Z/T CNC-Fraese is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. The high-Z/T CNC-Fraese achieves fantastic accuracy and an almost unmeasurable reverse play of about 0.01mm due to the ball's circulation spindles. At the same time, high travel speeds of up to 108mm/second ( 6500mm/ minute) can be achieved. This allows engraving and feeding speeds of up to approx. 4500mm/min and express ingesses up to approx. 7000mm/min. Here you can watch a video of empty journeys with the new High-Z/T. This series of mechanical engineering is just as applicable in the industrial sec ...

Granulator especially designed for inline size reduction of thin film (like BOPP / BOPET). Feeding via roller feeder. Extreme througput rate ! brand: NEUE HERBOLD made in germany - heavy duty model - drive 250 kW - size reduction of film - feeding via roller feeder - Rotor diameter: 800 mm - working width: 1950 mm - for very high throuput rates for the size reduction of film, tangled or bunched tapes and bands, PP big bags, crates or other hollow containers, BOPP / BOPET / PP in-line and off-line film extrusion lines.

Specifications / Technical Data S-720/T CNC-Engraving-Machine / Milling machine / CNC-Router With the purchase of the T-variation of High-Z CNC-router you get a proven technology with a certain icing of the cake in TÜV-certified quality. High-Z/T 3D-cnc-engraver was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T cnc milling machines achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machines you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This cnc-machine series is usable in the industrial ...

Specifications / Technical Data S-400/T CNC portal fraesmachine / engraving machine, TUeV certified Already more than 4500 CNC machines of type High-Z sold worldwide ! With the T-variant of the High-Z CNC-Fraesmaschine you acquire old-fashioned technology with the certain I-T-Tpfelchen The High-Z/T is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. The high-Z/T CNC fraes machine achieves fantastic accuracy and an almost unmeasurable reversal of about 0.01mm due to the ball-circuit spindles used. At the same time, high travel speeds of up to 108mm/second ( 6500mm/ minute) can be achieved. Thus, engraving and fraes speeds of up to approx. 4500mm/min can be realized and fast-moving speeds up to approx. 7000mm/min. This is just as applicable in the industrial sector for work such as engraving, frause, drilling, measuring, cutti ...

Specifications / Technical Data S-400/T CNC-Portal-Router / CNC-Engraving machine with TÜV certification With the purchase of the T-variation of High-Z cnc-router you get a proven technology with a certain icing of the cake in TÜV-certified quality. High-Z/T cnc-routers was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T 3D-cnc-engravers achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machines you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This 3D-milling-machine series is usable in the ...

Specifications / Technical data S-400/T CNC-Portalfraesmaschine / Engraving machine Granite, marble, slate, soapstone engraving, photoengraving, fraesen... With the T-variant of the High-Z CNC-Fraesmachine you acquire old-guarded technology with the certain i-Tuepfelchen in TUeV-Qualitat. The High-Z/T is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. Through the ball-circulation spindles used, the High-Z/T CNC-Fraes machine achieves a fantastic accuracy and an almost unmeasurable reverse play of about 0.01mm. At the same time, high travel speeds of up to approx. 108mm / second ( 6500 mm / minute ) can be achieved. This means engraving and fraes speeds of up to approx. 4500mm/min can be realized and urgent journeys up to approx. 7000mm/min. Here you can see a video about empty journeys with the new High-Z/T. This makes t ...

Stone Disc Grinder is especially preferred by high-capacity coffee makers, spice makers and it is used for grinding Turkish coffee and also Black Pepper, Allspice, Cumin, Salt and Feed Grain. Capacity 75 kg/h.

Specifications / Technical Data S-400/T CNC-Portal-Router / CNC-Engraving machine Grabite marble soapstione slate engraving photo engraving, milling .. With the purchase of the T-variation of High-Z cnc-router you get a proven technology with a certain icing of the cake. High-Z/T cnc-routers was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T 3D-cnc-engravers achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machines you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This 3D-milling-machi ...

Item condition: New. Machine is delivered pre-assembled and tested! Specifications / Specifications S-720/T CNC-Fraesmaschine and G raviermaschine / Fraese With the T-variant of the High-Z CNC Fraes.- and engraving machine you acquire old-fashioned technology with the certain I-Tpfelchen in TUeV-certified quality (EMC). The High-Z/T CNC-Fraese is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. The high-Z/T CNC-Fraese achieves fantastic accuracy and an almost unmeasurable reverse play of about 0.01mm due to the ball's circulation spindles. At the same time, high travel speeds of up to 108mm/second ( 6500mm/ minute) can be achieved. This allows engraving and feeding speeds of up to approx. 4500mm/min and express ingess esons up to approx. 7000mm/min. Here you can watch a video of empty journeys with the new High-Z/T. This i ...

Specifications / Technical Data S-720/T CNC-Engraving-Machine / Milling machine / CNC-Router With the purchase of the T-variation of High-Z CNC-router you get a proven technology with a certain icing of the cake in german TÜV-certified quality. High-Z/T 3D-cnc-engraver was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T cnc milling machines achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machines you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This cnc-machine series is usable in the indus ...

FOOD conveyor belt from the manufacturer IN PREMIUM quality + large stock! -Stable conveyor belt / conveyor belt made of PVC for many purposes, especially for the food industry, with 2 tissue deposits, coated on both sides run page from PVC diamonds profile (rollers band), oil - and grease-resistant! -New, endless welded, in blue (white also available) -Dimensions: 12.330 mm x 400 mm width x thickness 3.2 mm -Special price! On request we can cut the belt conveyors / conveyor belts to your individual measurements. (All lengths and widths possible) Hook connection on request. Additional versions, with pimples, Stollen or structured surfaces available. Statable VAT! Not is your desired size? No problem! We customize for you! More belts, drive belt and flat belt in all other sizes available immediately . We ship worldwide we deliver worldwide, please ask for shipping costs! BELTe ...

Beer Filler Krones, VP-VI 104-087 104 valves, Crown capper 18 heads, Labellers Krones Starmatic 600-158-6-130. Filler is fully electronically controlled by computer, each valve can be regulated independly. Machine has all new installed SMC electric valves – exchanged in 2016. Several pre-evacuation steps and the bottle treatment with gas from the ring ensure minimum oxygen. Sensomatic Filler can work without problem with beer directly after Flasch pasterisation, with beer temperature of 15 Celcius, or even more. Capacity: 36 000 b/h This machine worked exellentlly, especially after instalation of new SMC valves. THE PRICE APPLIES TO THE FULLY RENOVATED DEVICE. WARRANTY - 2 YEARS

Collar shelving used, 4.70 m x 1.20 m condition very good, no content -4 shelf stand unilaterally 4700 mm high -usable foot and arm depth 1200 mm -Holes for the arm fixation all 100 mm -with 12 height-adjustable standard rack arms (3 PCs per rack) -Load capacity at load Centre 600 mm -900 kg each arm / 2700 kg per stand -Wheelbase with longitudinal and diagonal associations: 1.30 m / length shelf number approximately 4.00 m -all parts galvanized -including all screws and nuts, without ground anchor. The shelf is available in stock in stock and within 4-12 working days. Freight charges please enquire. Pickup is also possible in 32339 Espelkamp. Phone: 05743-933770 Email: info@bruckamp.de For questions we are gladly available.

Collar shelving used, 4.20 m x 1.20 m condition very good, no content -4 shelf stand double-sided 4200 mm high -usable foot and arm depth 1200 mm -Holes for the arm fixation all 100 mm -with 24 height-adjustable standard rack arms (3 PCs per rack page) -Load capacity at load Centre 600 mm -750 kg each arm / 2250 kg per stand side -Wheelbase with longitudinal and diagonal associations: 1.30 m / length shelf number approximately 4.00 m -all parts galvanized -including all screws and nuts, without ground anchor. The shelf is available in stock in stock and within 4-12 working days. Freight charges please enquire. Pickup is also possible in 32339 Espelkamp. Phone: 05743-933770 Email: info@bruckamp.de For questions we are gladly available.

Collar shelving needed, 4.70 m x 1.20 m, state very well, without content -4 shelf stand double-sided 4700 mm high -usable foot and arm depth 1200 mm -Holes for the arm fixation all 100 mm -with 24 height-adjustable standard rack arms (3 PCs per rack page) -Load capacity at load Centre 600 mm -900 kg each arm / 2700 kg per stand side -Wheelbase with longitudinal and diagonal associations: 1.30 m / length shelf number approximately 4.00 m -all parts galvanized -including all screws and nuts, without ground anchor. The shelf is available in stock in stock and within 4-12 working days. Freight charges please enquire. Pickup is also possible in 32339 Espelkamp. Phone: 05743-933770 Email: info@bruckamp.de For questions we are gladly available.

Overhaul year 2018 Year of manufacture 2010 Saw blades carbide 500 mm Saw motor power 7,5 KW Speed saw motor 2000-38000 min-1 Cutting speed blade 3100-6000 mm / min Saw blade feed adjustable 0-40 mm / s Working range 90 ° Max: 460 x 50 mm Supply length Pneumatic: Single stroke: Max 300 mm Servo controlled: Single stroke: Max 300 mm Multiple Hub: maximum 9999 mm Nachschubgeschw. Servo-controlled replenishment unit 300 mm / s Compressed air connection of be 6 bar Gewicht(Saege)CA.: 1000 kg Dimensions LxBxH(Saege)ca.: 2100mm x2000mm x1600mm Hydraulikagregat) approx.: 900 mm x600mm x800mm Technical description Pressta Eisele Profilma 540 retrofit Pressta Eisele Profilma 540 retrofit Fully automatic high-speed sawing machine for non-ferrous metals and plastics The machine is both technically and optically after completed retrofit in mint condition. The machine  ...

) Mortising depth 100 / 150 mm-) nominal no load speed 1/min - 4050) rated power 2500 W-) weight 8.7 kg-) universal motor 230 V / 50 Hz transverse stop best. No. 200954 1 Allen key 4 mm best. No. 093074 1 Allen key 8 mm best. No. 093070 1 connection cable 10 m best. No. 087612 â?¾Zapfenlöcher â?¾Materialeinsatz such as: Solid wood, laminated wood â?¾Ergonomische handle and switch arrangement - for safe, efficient and energy-saving work. â?¾Geringes weight - ideal for use on construction sites. â?¾Extrem powerful motor - for high efficiency and saving time. â?¾Einzigartiges light-weight 8.7 kg. â?¾Der long cross fence holder with large adjustment range allows you to work on large-scale wood. â?¾DAS clamping system in the LS 103 EC allows a quick chain change. Even a tighten ...

V10 - used approx. 32 m³ / 32,000 litres stainless V4A steel tank, transportation tank, insulated, with 3 internal walls, on a steel frame. technical details: capacity: approx. 32 m³ / 32,000 litres material: stainless V4A steel tank, Inox, AISI 316L: WNr. 1.4404 (X2CrNiMo17-12-2), (V4A, A4L) Austenitic, stainless steel, L stands for low carbon content. use: for mechanical components with increased corrosion resistance requirements, especially in chloride-containing media and for hydrogen. AISI 316L is used in a wide range of fields, in the pharmaceutical industry (manufacture of cleaning, disinfection and drying machines), in medical and dental technology, as well as in swimming pool construction. weight: approx. 4 t without frame test pressure: 4 bar dimensions: approx. 2.00 m x 9.00 m; total height incl. frame approx. 2.70 m Other: Used tank in good condition,  ...

We offer new shopping trolleys in the colours red or anthracite grey from stock. Thanks to the additional single handle, the trolley's can also be used as a hand basket for your customers. We are happy to offer further colours on request with corresponding delivery time. An imprint of your company logo it is also possible depending on the quantity, this must be requested separately. Especially in smaller markets or shops, these roll trolleys are a space-saving alternative to the shopping cart as they only use a very small area stacked. Used items are all checked for functionality, cleaned and reconditioned if required. Example images are shown. In the case of used goods, the goods may differ visually. A sale is made only to entrepreneurs, traders, freelancers, public institutions and not to consumers in accordance with Section 13 of the German Civil Code (BGB) Shopping tro ...

Sell a tool grinding machine especially for grinding stools or similar. One side is equipped with a chuck that can be adjusted in all directions. The whole thing is on a cross support Dimensions 16001000'1500mm High Clamping range chuck 4040mm Grinding wheels diameter 175mm50mm and 320mm50mm Voltage probably 110V