esc used for sale

Manufacturer: ESC Model: ESC-AT-60PD Type of Machine : Screen Printing Machine Semi-automatic, universal, digitally controlled precision screen printing machine for flexible and rigid materials up to 200 mm material thickness STANDARD EQUIPMENT/FEATURES - Programmable PLC control system - User-friendly operation via touch screen - High-quality linear guides for smooth, low-noise motion - Vertical, motor-driven screen frame lifting with synchronized stripping motion - Precision print head with pneumatic lift for screen change and cleaning - Digital input of desired print parameters: - Speed for print and flood squeegee - Print height - Print stroke length - Neutral position for print and flood squeegee - Single-function control for setup operation - Single-cycle operation via foot switch and automatic cycle mode - Extremely short setup times without the need for tools - Pneumatic scr ...

ESC-HIGH PRESS PLUS E3 Model 0 max. print size: 510 x 720 mm max. sheet size: 520 x 720 mm min. sheet size: 270 x 350 mm gripper margin: 10 mm Additional equipment: - RKS squeegee system - Antistatic device with control unit AFC-2 and SCPB electrodes 530 with cable length 180 cm including connector HV-4 - integrated cleaning station system TEKNEK in the machine inlet - equipped with ESC leading edge feeder Find more here - .ucymachines/

A Systec/ESC 2-color flatbed screen printing system is available. Processes: unwind unit, printing unit 1, intermediate module, printing unit 2, rewind unit. Unwind unit: Systec, intermediate module: Systec, rewind unit: Systec, printing units 1/2: ESC. Max. print format: 300mm/450mm, vacuum table dimensions X/Y: 400mm/600mm, vacuum surface dimensions X/Y: 345mm/465mm, max. frame dimensions X/Y: 500mm/750mm, print material thickness range: 0mm-50mm, working height: 945mm, printing speed: 500mm/s, max. cycle rate: 800pcs/h, fine adjustment: +/-10mm, squeegee angle adjustment: +/-9°, unwind roll diameter: 600mm, unwind roll spindle diameter: 3in, vacuum boxes: 3. Machine dimensions X/Y/Z: approx. 7900mm/1400mm/1950mm. Documentation available. An on-site inspection is possible.

Manufacturer: ESC – Europa-Siebdruck-Centrum GmbH & Co. KG Model designation according to nameplates: PAJD 1100-2C/IR and Perfection 1100 2C/IR Year of manufacture according to nameplates: 2016 and 2017 Machine/Factory Numbers: 9960-14-1065 / 11661 Electrical connection: 400 V, 50 Hz Rated current: 120 A (nameplate PAJD) Nominal power: 76 kW (Perfection nameplate) Degree of protection: IP40 Belt type: IR temperature tunnel with conveyor belt (width according to series: 1100 mm) Assembly: IR drying system for screen printing or varnishing processes Design: Closed safety enclosure with access doors Application: Drying/shortening of printed or coated components Location: Schierling Viewing possible by appointment.

A flatbed screen printing machine ESC is available. Print dimensions X/Y: 1200mm/800mm, max. print format: DIN A0, machine dimensions X/Y/Z: approx. 1550mm/1750mm/1200mm, weight: approx. 550kg. An on-site inspection is possible.

Manufacturer: ESC Model: Continuous Dryer Perfecton S with UV Year of Manufacture: 2020 Technical Specifications Heating Chamber 80°C - Galvanized nozzle plate - Process fan: TRZ 250-3 - Indirect air intake from process room - Recirculated air volume: 3,400 m³/h at 510 Pa - RRH heating register: 18 kW at max. 80°C - Drive motor: 2.2 kW / B3 / 1,410 rpm / insulation class F - Length: 2,000 mm Cooling Chamber - Process fan: TRE 250-3 - Supply and exhaust air volume: 3,400 m³/h at 800 Pa - Stainless steel drip tray for process fan - Drive motor: 2.2 kW / B3 / 1,500 rpm / insulation class F - Without cooling register and refrigeration unit - Length: 2,000 mm Discharge Element - Steel drive roller with rubber coating - Mounting for belt drive - Length: 500 mm Construction Details - All hoods and cladding panels made of electrolytically galvanized steel sheet - Heating chamber h ...

Manufacturer: ESC Model: Continuous Dryer Perfecton S Year of Manufacture: 2021 Technical Specifications Heating Chamber 80°C - Galvanized nozzle plate - Process fan TRZ 250-3 - Indirect air intake from process room - Air circulation volume: 3,400 m³/h at 510 Pa - Electric heating register: 18 kW at max. 80°C - Drive motor: 2.2 kW / B3 / 1,410 rpm / ISO F - Length: 2,000 mm Cooling Chamber - Process fan TRE 250-3 - Supply and exhaust air volume: 3,400 m³/h at 800 Pa - Stainless steel drip tray for process fan - Drive motor: 2.2 kW / B3 / 1,500 rpm / ISO F - Without cooling register and chiller - Length: 2,000 mm Discharge Element - Rubber-coated steel drive roller - Mounting for belt drive - Length: 500 mm General Construction - All hoods and cladding panels made of electro-galvanized steel sheet - Heating chamber hoods are insulated DIMENSIONS - Belt width: 1,700 mm - B ...

Four identical screen printing machines ESC are available. Rigid material thickness: 200mm, max. print format X/Y: 400mm/600mm, vacuum plate dimensions X/Y: 500mm/700mm, vacuum area dimensions X/Y: 405mm/600mm, max. frame dimensions X/Y: 600mm/940mm, frame profile range: 25mm-47mm, max. print material thickness: 200mm, working height: 960mm, frame lift: 270mm, printing speed range: 125mm-750mm/s, max. cycle rate: 600p/h, fine adjustment: +/-10mm, squeegee angle adjustment: +/-9°, working pressure range: 5bar-7bar. Machine dimensions X/Y/Z: approx. 1300mm/1100mm/1600mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible. Individual sale possible.

A continuous drying system ESC with an integrated UV intermediate module for printing use is available. Heating chamber: fan type: TRZ 250-3, length: 2000mm, recirculating air volume at 510Pa: 3400m³/h, max. temperature: 80°C, heating capacity: 18kW. Cooling chamber: fan type: TRE 250-3, length: 2000mm, air volume flow: 3400m³/h. UV intermediate module: belt width: 1700mm, emitters: 2, max. emitter power: 120W/cm. Belt height: 900mm, outlet element length: 500mm, inlet length: 1200mm, zone lengths: 2000mm, system width: approx. 2250mm, total length: approx. 10700mm. Documentation available. An on-site inspection is possible.

A continuous drying system ESC for printing use is available. Heating chamber: fan type: TRZ 250-3, length: 2000mm, recirculated air volume at 510Pa: 3400m³/h, max. temperature: 80°C, heating capacity: 18kW. Cooling chamber: fan type: TRE 250-3, length: 2000mm, air volume flow: 3400m³/h. Belt height: 900mm, discharge element length: 500mm, infeed length: 1200mm, zone lengths: 2000mm, system width: approx. 2250mm, total length: approx. 10700mm. Documentation available. An on-site inspection is possible.

A total of five identical ESC screen printing machines with different years of manufacture are available. Vacuum dimensions X/Y: 405mm/600mm, max. print dimensions X/Y: 400mm/600mm, vacuum table dimensions X/Y: 500mm/700mm, max. frame dimensions X/Y: 700mm/800mm, frame profile range: 25mm-54mm, max. substrate thickness: 300mm, max. cycle output: 800p/h, machine dimensions X/Y/Z: approx. 1250mm/950mm/1600mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible.

Size: 300 x 450 mm Equipments: max. screen frame size 500 x 750 mm table height 945 + 30 mm screen lift height 300 mm max. printing speed 100 - 500 mm/sec. max. cycling speed 800 p/h mains supply 220, 50/60 V / Hz working pressure 5 - 7 bar dimensions (LxWxH) 920 x 750 x 1710 mm weight approx. 245 kg

This ESCO Escomatic EC12 was manufactured in 2010. A Swiss type turning machine, its ideal for precision and efficiency in small part production. Contact us for more information about this machine.

ESCO ESCOMATIC D 6 SR ist ein Drehautomat, konstruiert für hohe Präzision, Genauigkeit und Zuverlässigkeit. Kapazitäten: Werkstoffdurchlass 6 mm; mit Flachkurve Drehlänge 62 mm; Spindelbohrung 6 mm. Technische Daten: 3 Spindelstufen 2400–6000 t/min; 3 Drehstähle; Revolver 1a (D6-8-Mp 103/a) mit 4 Werkzeugen; Anschluss 220/440 V (60Hz); Leistung 2.5 CV; Gewicht ~1150 kg; Abmessungen L1500×B1000 mm. Ausstattung: Revolver/Turret. Erreicht enge Toleranzen; geeignet für Automotive, Uhrmacherei, Maschinenbau, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

ESCO ESCOMATIC D 6 SR ist ein Drehautomat, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Kapazitäten: mit Flachkurve Drehlänge 62 mm; Spindelbohrung 6 mm; 3 Drehstähle; Revolver 1a (D6-8-Mp 103/a) mit 4 Werkzeugen. Techn. Daten: 3 Spindelstufen 2400–6000 t/min; Anschluss (60Hz) 220/440 V; Leistung 2,5 CV; Gewicht ~1150 kg; Abmessungen L1500×B1000 mm. Ausstattung: Revolver und Flachkurve. Erreicht enge Toleranzen; Einsatz: Automotive, Uhrmacherei, Werkzeugbau, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

ESCO ESCOMATIC D 6 S ist ein Drehautomat, ausgelegt für Präzision, hohe Genauigkeit und zuverlässigen Betrieb. Bearbeitungsvermögen: Werkstoffdurchlass rund 6 mm (62 mm mit Flachkurve), Spindelbohrung 6 mm, 3 Drehstähle. Haupttechnische Daten: 3 Spindeldrehzahlen von 2400 bis 6000 t/min, Anschluss 60 Hz 220/440 V, Gesamtleistung 2,5 CV, Maschinengewicht ca. 1150 kg, Abmessungen L1500 × B1000 mm. Erreicht enge Toleranzen; typische Einsatzbereiche: Automotive, Uhrmacherei, Maschinenbau, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr

ESCO ESCOMATIC D 6 SR ist ein Drehautomat für präzise, hochgenaue und zuverlässige Fertigung. Kapazität: Werkstoffdurchlass rund 6 mm; mit Flachkurve Drehlänge 62 mm; Spindelbohrung 6 mm. Technische Daten: 3 Spindeldrehzahlen von 2400 bis 6000 t/min; 3 Drehstähle; Revolver 1a (D6-8-Mp 103/a) mit 4 Werkzeugen; Anschluss 60Hz 220/440 V; Gesamtleistung 2.5 CV; Gewicht ca. 1150 kg; Abmessung L1500 × B1000 mm. Ausstattung: Revolver und Flachkurve. Erreicht enge Toleranzen; geeignet für Automotive, Uhrenindustrie, Werkzeugbau, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr

Centrifugal deposition Hydro Zyclone Liquid Particle Separator Hydro Cyclean HC5/HCH5 used Hydrocyclone Gravity-Water-Particle Separator Cyclone Water filter Water cleaner Watercleaner For separating heavier, larger particles in liquids or sludges. Was used to separate particles from washed-up pappier & cardboard solids. Price per pc3 3 x available Manufacturer: SULZER-ESCHER WYSS GmbH Type: HC5-TB5B.40 Y.O.M.: 1993 Main pipes dN400 1x Masch.Nr: 11835 (EQ.Nr 11GE01/1st stage) 1x Masch.Nr: 11837 (EQ.Nr 11GE01/1st stage) 1x Masch.Nr: 11836 (EQ.Nr 11GE01/1st stage) 1x available Manufacturer: SULZER-ESCHER WYSS GmbH Type: HC5-TB6B.48 Y.O.M.: 1993 Main pipes dN400 1x Masch.Nr: 11835 (EQ.Nr 11GE02/2nd stage) Cyclone & Distribution Material: Plastic Frame & Pipe Material: Stainless Steel Size Total approx.: 6200 x 1100 x 2800 mm Weight each approx.: 2.5 to T ...

EPSM / Biological Safety Station ESCO AIRSTREAM PLUS (AC2-5E8-TU) 1.5m New equipment in its original packaging Complete package including: PSM ESCO Airstrem plus class II AC2-5E8-TU with a length of 150cm (1.5m) A UV-30A UV lamp A fixed stand with levelling feet Height: 71cm SAL-5A0 GEN2 2 internal sockets TüV NORD EN 12469 certified model Automatic regulation and malfunction alarm and dry contact for alarm reporting Economical dual motors ensure permanent and stable flow control Removable stainless steel worktop, with a large work surface and inclined undermount for liquid retention LED lighting Control panel with clear flow display, glass position Quiet operation The PSM are equipped with 2 electrical outlets and a UV lamp Depth without armrest: 767 mm / with armrest: 823 mm Motorized front window, stops at working position External stainless steel arm rest on  ...

General SKU385T1160 MakeEsco-Labor TypeEL-10 LocationBarneveld Main Features MaterialStainless steel Volume12.5 Ltr. Motor0.14 KW Specified Features - Processing vessel Closed stirring vesselcheck Capacity±12.5 Ltr. Vessel sizesDia 240x275 mm Flat top sidecheck With covercheck Top connectionsDN 50, 12 mm(2x) Outlet28 mm Half coil jacketedcheck With anchor stirrercheck Motorindur antriebtechnik AG, 0,14 kW, 180 Volt With homogenisercheck MaterialStainless steel With jacketcheck General No.365/1 Year of construction1991 Mounted on legscheck With switchgearcheck Floorspace1x0,55 m Total height1,3 m Weight180 kg Extra information Motor on cover: esco-labor x40/38, factory no: 749, 220 Volt, 1.7kW, 22000rpm Vacuum pump : type N726.3 FT.18, NR:689428, 220 Volt, 0.15 kW Generic medicinesOintmentsGreen FridayBiotechnologyPlastic & polymersProcessing vesselsDeter ...

Hydropower - Power: 240 kW consisting of: 1 piece turbine Pelton/ paygap 225m, water quantity 130 l/s, manufacturer; Escher-Wyss 1 piece generator power 240 kW, manufacturer; Barthold

CNC Thread rolling and gear burnishing machine ESCOFIER P440 CN CNC Siemens New 2004 - like new 2-roll 2 moving heads 4000 daN rolling pressure workpiece diameter: 100mm max. tool diameter: 180-245mm Swiveling: +/-6°, forward speed: 0.1-20mm/s, reverse speed: 0.1-30mm/s motor power: 8.6kW New: 2004 Condition: like new

Kaplan turbine Escher Wass with standing shaft, used very good condition Gradient 7.00m-7.2 m Water volume 6000l/sec, power 500 hp, speed 375T/min

Sensor-actuator distributor, distribution strip, distribution box, HV distributor, HV distributor -Manufacturer: Escherich, High Voltage Distributor -Type: 100082 (ES108) HVD-05 -Quantity: 2x distribution block available -Price per piece -Dimension: 130/120/H50 mm -Weight: 0.5 kg

General SKU391U1101 MakeEsco-Labor TypeEL1 (glas) LocationBarneveld Pressure Vacuum possiblecheck Main Features MaterialGlass Volume1 Ltr. Motor0.75 KW Specified Features - Processing vessel Closed stirring vesselcheck Capacity1 liter Vessel sizesDia. 120 mm x 150 mm Dished bottomcheck Flat top sidecheck Top connectionscheck Outletcheck With jacketcheck With anchor stirrercheck Motor65 W (3500 rpm) Speed mixing shaftmax 540 rpm With homogenisercheck Motor750 W (2800 rpm) MaterialGlass, Stainless steel With jacketcheck General No.635/1 Year of construction1993 Mounted on legscheck With switchgearcheck Floorspace1 x 0,5 m Total height0,75 m Weight40 kgGeneric medicinesOintmentsGreen FridayBiotechnologyPlastic & polymersProcessing vesselsDetergent & surf.CosmeticsFood additivesLubricants & oleoConfectioneryBiopharmaceuticalAPIEsco LaborIndustries > Pharmac ...

General SKU224X117 LocationBarneveld Main Features MaterialStainless steel Motor3 KW Surface1.7 m2 Specified Features - Roll dryer Roll coolercheck Rolls chromium platedcheck Roll surface1,7m² Roll sizesDia. 600x600 mm Cooling medium(Glycol) Feeding with rollscheck With knife dischargecheck Motor3,0 kW, (380 V, 2700 rpm) With variable speed drivefrequency converter Roll speed22 rpm MaterialHard chrome General MakeEscher Wyss Year of construction2010 Mounted on framecheck With switchgearcheck Floorspace2,80x0,90 m Total height1,50 m Weight2150 kg Extra information With control cabinet, dimensions 0,80x0,30x1,80 m, - with scraper knife, length 600 mm,  - jacketed aplication roll, dimensions 600 mm, 0,75 kW, 240/380-415 volt, 2700 rpm, roll speed 17 rpm,  - product application tray with jacket -pneumatic knife control and wall control, -insulated vertical tan ...

General SKU279U510 MakeEscher Wyss TypeFTK 135/450 No.2710214 Year of construction1980 LocationBarneveld Main Features MaterialMild steel/Stainless steel Motor0.6 KW Surface1.35 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Surface1.35m² Bed sizes3000x450 mm Product inlet450x200 mm Product outletDia: 80 mm Number of sections:3 Air inletDia:380x300 (3x) Air outletDia: 270mm Vibro motor0,6 kW,220/380 volt, 980 rpm (2x) Without motorcheck MaterialMild steel, Stainless steel 1.4301 (304) General Mounted on mild steel framecheck Floorspace3,8x1,03 m Total height2,7 m Weight2000kgPowdered foodsTea, herbs & coffeeStarchBiotechnologyAgrochemicalsSpicesFluid bed dryers continuousCatalysts & fillersFeed additivesCosmeticsAnimal feedSolid pharmaceuticsDyes & pigmentsMinerals & inorganicEscher WyssIndustries > Food & Feed > Powdered fo ...

General SKU201P083 MakeESCHER WYSS TypeH100 No.2652 Year of construction1979 LocationBarneveld Main Features MaterialStainless steel Motor37 KW Inlet diameter1000 mm Specified Features - Peeling centrifuge Peeler centrifugecheck Capacity180 Ltr Basket sizesdia.1000mm x600mm Max. loading weight232 Kg Hydraulic drivecheck With hydraulic unitcheck Motor+/- 37 kW, 380 Volt With variable speed drivecheck Max. basket speed1530 rpm With hydraulic unitcheck Motor0,75 kW Inletdia.155mm Solids outlet200x200 mm (screw) Liquid outlet440x185 mm MaterialStainless steel General Mounted on foundation platecheck Floorspace3,4x1,6 m Total height2,3 m Weight3600 kgGeneric medicinesPeeling centrifugesBiotechnologyCatalysts & fillersFeed additivesCosmeticsFood additivesSolid pharmaceuticsDyes & pigmentsBiopharmaceuticalAPIMinerals & inorganicEscher WyssIndustries > Pharmaceuti ...

Power supply, power converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, dual power supply -Manufacturer: Escherich high-voltage power supply Power Unit 55 FC -Type: PU55 FC-230V / ES023 -Voltage: 230V/50-60Hz -Quantity: 2x power supply available -Price: per piece -Dimension: 235/120/H140 mm -Weight: 2.9 kg/pc.

Homogenizing Machine Manufacturer: EscoLabor Type EL-3

ESCHER Spiral Mixer M-500 R-P - Used machine, little used, year of manufacture: 2021 - for 300 kg flour or 500 kg dough, kettle volume 700 litres, Boiler, kneading arm and middle rod in stainless steel, Boiler lock and boiler drive by patented cone system, two timers, two speeds, automatic switching from low to high speed, hydraulic lifting and lowering of the machine head, closed flour dust protection hood made of stainless steel, Machine incl. two tank cars

General SKU291Y550 LocationBarneveld MakeEsco Labor Pressure Vacuum possiblecheck Main Features MaterialStainless steel Volume15 Ltr. Motor0.14 KW Specified Features - Processing vessel Closed stirring vesselcheck CapacityCa. 15 l. Vessel sizesDia. 240x315 mm Dished bottomcheck With covercheck Outlet28 mm With jacketcheck Max. temperature30-110°C With anchor stirrerwith scraper Motor0,14 kW, 230 V. 3000/60 rpm With homogenisercheck MaterialStainless steel 1.4301 (304) With jacketcheck General TypeEL10 Mounted on legsand wheels With switchcheck Floorspace0,60 x 0,65 m Total height2,00 m Weight180 kg Extra information With Edwards high vacuum pump,  temperature meter,  External heating  Generic medicinesOintmentsGreen FridayBiotechnologyPlastic & polymersProcessing vesselsDetergent & surf.CosmeticsFood additivesLubricants & oleoConfectioneryBiopharmaceu ...

CNC Thread rolling and gear burnishing machine, ESCOFIER P440 CN, CNC Siemens, New 2004 - like new, 2-roll, 2 moving heads, 4000 daN rolling pressure, workpiece diameter: 100mm max., tool diameter: 180-245mm, Swivelling: +/-6°,, forward speed: 0.1-20mm/s, reverse speed: 0.1-30mm/s, motor power: 8.6kW, New: 2004, Condition: like new, under power in our warehouse, Mimu Machine Tools (Italy)

CNC Thread rolling and gear burnishing machine ESCOFIER P440 CN CNC Siemens New 2004 - like new 2-roll 2 moving heads workpiece diameter: 100mm max. tool diameter: 180-245mm Swivelling: +/-6°, forward speed: 0.1-20mm/s, reverse speed: 0.1-30mm/s motor power: 8.6kW New: 2004 Condition: like new This machine can be inspected under power in our warehouse in Gussago BS (Italy) Mimu Machine Tools

Y.O.M.: 1999 No.: 900/1 Scraper and Homo speed-controlled Vertical stroke, double jacket, swivel Temperature gauge, Vacuum, Ystral-Turrax Temperature control device GWK Type teco CS 90 Y.O.M.: 2002 Heating capacity: 9 kW Cooling capacity 23 kW, temperature maximum 95°C Dimensions LWH: 1200 x 800 x 1000 mm Weight: approx. 100 kg

Scraper and homogenizer (Ystral) speed-controlled Vertical stroke, double jacket swiveling with heating and vacuum pump on a mobile cart switchgear, timers, etc. Condition very good Dimensions LWH: 700 x 600 x 1900 mm Weight: approx. 150 kg

Max. size= 55 x 35 cm, Availability= 062024, Automatic thermography machine (Thermo Relief continuous furnace) stand model for transformation of offset/letterset printing into raised printing with powder. With belt of 35 cm, control panel, electronic heating control, conveyor control, powder vibrator. In good working condition LOT Loaded in truck or container

Stainless steel tank, Mobile, tilting, double envelope, Tank bottom drain, Total volume 75 litres, Useful volume 50 litres, Dimensions between wheel passage: 645 mm, tipping height: 560 mm, Volume: 76, Useful volume: 50 L , Pneumatic: 2 bar , Cover diameter: 440 mm, Bottom tank outlet diameter: 36 mm, Mobile tank: Yes, Double envelope: Yes, Dimensions (mm): 850x850 H 1250, Side tapping: 1, Tank bottom outlet diameter: 36 mm

ESCO D 2 ist ein Drehautomat, ausgelegt für höchste Präzision, hohe Genauigkeit und Zuverlässigkeit. Werkstoffdurchlass rund 4 mm; mit Flachkurve 24 mm; Anzahl Drehstähle 2. Spindel mit 2 Drehzahlen 4000–6000 t/min; Anschluss 3x 220 V 50 Hz; Gesamtleistungsbedarf 1.5 CV; Maschinengewicht ca. 700 kg; Abmessungen L1400×B1000×H1500 mm. Erzielt enge Toleranzen; geeignet für Automobil, Uhrenindustrie, Werkzeugmaschinen, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr

Max. volume flow rate: 1,260m³/h, possible number of filter stages: 1, 2, operating voltage: 3x 400V, PE, N, frequency: 50Hz, rated power: 1.8-2.9kVA, max. rated current: 2.7-6.6A, upstream fuse: 16A, mains connection three-phase AC: 400V, max. rated power: 2.9kVA, max. rated current: 6.6A, upstream fuse: 16A, control cabinet protection rating: IP54, max. differential pressure: 2,380Pa, compressed air quality: factory-supplied, oil-free, dry, max. inlet operating air pressure: 8bar, operating temperature: 5-40°C, weight: 165kg. On-site inspection is possible.

Tubular frame lock, locking body, door fitting, mortise lock, escape door lock, panic mortise lock -Manufacturer: BKS, mortise lock panic mortise lock, unused Ovp -Type: B-21160-02-R-8 -Number: 4x mortise lock available -Price per piece -Dimensions box: 240/140/H30 mm -Weight: 0.9 kg/piece

USED ESCOFIER M6 NET ROLLING MACHINE Power: 6 Tons Diving work Dimensions and weight Euro pallet: 1200x800xH2000mm - weight 300kg Auction-ID: A1-50950-12

ESCO LABOR Model mixer-reactor: EL3. Stainless steel tank with 3 L useful double jacket (4 L total), low-speed scraper and rotor-stator homogenizer, integrated heater, PT100 probe and pressure gauge.2 solenoid valves on the cooling to be replaced. Two motors, pig motor and emulsion motor Can be connected to an external cooler. Auction-ID: A1-51318-2

ESCO LABOR reactor-mixer (Swiss manufactured) with Glass reactor. Possibility of operating under vacuum. Offered with vacuum pump and external cooler. External control console, double-walled glass tank, pressure controller, temperature probe and scraper/mixer up to 1000 rpm. Emulsion option not present. Auction-ID: A1-51318-1

ESCO CYT Cytotoxic Safety Station, 120cm, 3 filters including 2 main ULPA filters and extraction; 1 activated carbon filter in the foot. UV lamp. Used 6 months. Auction-ID: A1-51320-73

Condition: New (traces of storage available) Part Number: 8256016 Serial Number: 19293766 Type: 1724 Suitable for: Mitsubishi S12R

Auction-ID: A1-51025-4

Auction-ID: A3-46100-20637

Powerful and particularly robust metal band saw with mAlu die-cast saw table and infinitely variable cutting speed for mitre cuts up to 60° Without machine base ! Cutting range at 90 degrees: around 172 mm Cutting range at 90 degrees: square 170 mm Cutting range at 90 degrees: rectangle 170 x 170 Saw blade dimensions 2035 x 20 x 0.9 mm Dimensions L x W x H 430 x 960 x 520 m Belt speed 30 - 80 m/min Total power requirement 1.5 kW Machine weight approx. 38 kg Condition: never used / new (5) Auction-ID: A7-51438-486