esc used for sale

Y.O.M.: 1999 No.: 900/1 Scraper and Homo speed-controlled Vertical stroke, double jacket, swivel Temperature gauge, Vacuum, Ystral-Turrax Temperature control device GWK Type teco CS 90 Y.O.M.: 2002 Heating capacity: 9 kW Cooling capacity 23 kW, temperature maximum 95°C Dimensions LWH: 1200 x 800 x 1000 mm Weight: approx. 100 kg

Hydropower - Power: 240 kW consisting of: 1 piece turbine Pelton/ paygap 225m, water quantity 130 l/s, manufacturer; Escher-Wyss 1 piece generator power 240 kW, manufacturer; Barthold

Centrifugal deposition Hydro Zyclone Liquid Particle Separator Hydro Cyclean HC5/HCH5 used Hydrocyclone Gravity-Water-Particle Separator Cyclone Water filter Water cleaner Watercleaner For separating heavier, larger particles in liquids or sludges. Was used to separate particles from washed-up pappier & cardboard solids. Price per pc3 3 x available Manufacturer: SULZER-ESCHER WYSS GmbH Type: HC5-TB5B.40 Y.O.M.: 1993 Main pipes dN400 1x Masch.Nr: 11835 (EQ.Nr 11GE01/1st stage) 1x Masch.Nr: 11837 (EQ.Nr 11GE01/1st stage) 1x Masch.Nr: 11836 (EQ.Nr 11GE01/1st stage) 1x available Manufacturer: SULZER-ESCHER WYSS GmbH Type: HC5-TB6B.48 Y.O.M.: 1993 Main pipes dN400 1x Masch.Nr: 11835 (EQ.Nr 11GE02/2nd stage) Cyclone & Distribution Material: Plastic Frame & Pipe Material: Stainless Steel Size Total approx.: 6200 x 1100 x 2800 mm Weight each approx.: 2.5 to T ...

Scraper and homogenizer (Ystral) speed-controlled Vertical stroke, double jacket swiveling with heating and vacuum pump on a mobile cart switchgear, timers, etc. Condition very good Dimensions LWH: 700 x 600 x 1900 mm Weight: approx. 150 kg

capacity 90 degrees: round: 130 mm capacity 90 degrees: square: 130 mm : 130 x 125 dimensions of saw-band: 1440 x 13 x 0,65 mm dimensions: 350 x 690 x 520 m band speed: 30 - 80 m/min total power requirement: 1,2 kW weight of the machine ca.: 19 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: ESC – Europa-Siebdruck-Centrum GmbH & Co. KG Model designation according to nameplates: PAJD 1100-2C/IR and Perfection 1100 2C/IR Year of manufacture according to nameplates: 2016 and 2017 Machine/Factory Numbers: 9960-14-1065 / 11661 Electrical connection: 400 V, 50 Hz Rated current: 120 A (nameplate PAJD) Nominal power: 76 kW (Perfection nameplate) Degree of protection: IP40 Belt type: IR temperature tunnel with conveyor belt (width according to series: 1100 mm) Assembly: IR drying system for screen printing or varnishing processes Design: Closed safety enclosure with access doors Application: Drying/shortening of printed or coated components Location: Schierling Viewing possible by appointment.

CNC Thread rolling and gear burnishing machine ESCOFIER P440 CN CNC Siemens New 2004 - like new 2-roll 2 moving heads 4000 daN rolling pressure workpiece diameter: 100mm max. tool diameter: 180-245mm Swiveling: +/-6°, forward speed: 0.1-20mm/s, reverse speed: 0.1-30mm/s motor power: 8.6kW New: 2004 Condition: like new

Kaplan turbine Escher Wass with standing shaft, used very good condition Gradient 7.00m-7.2 m Water volume 6000l/sec, power 500 hp, speed 375T/min

CNC control, control panel, control desk, control unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards, control card, circuit board -Manufacturer: KUKA, control plug-in cards printed circuit boards -Type: ESC-CI V1.60 -Item No.: 00-106-290 0018 -Dimensions: 255/160/H45 mm -Weight: 0.8 kg

Max. size= 55 x 35 cm, Availability= 062024, Automatic thermography machine (Thermo Relief continuous furnace) stand model for transformation of offset/letterset printing into raised printing with powder. With belt of 35 cm, control panel, electronic heating control, conveyor control, powder vibrator. In good working condition LOT Loaded in truck or container

Precise 0,6kw ESC 3043 +Control Unit 50k 1min. pneum. Tool change D.4mm Total weight 15kg. Only the spindle without cable weighs approx. 3.5kg Pneumatic collet/tool change. Diameter 4.00mm Max. speed 50,000, minimum 10,000 is specified. According to the controls, however, it somehow goes up to 6000 down. Water cooling is necessary during operation, this is all described in the original operating instructions. Water cooling is not included. The requirements are described. There is at least talk of liquid cooling on the technical drawing. Very good used condition, full function. You will receive an invoice in paper form. Differential taxation according to sec. 25a of the German VAT Act. Therefore, no VAT is shown on the invoice. 24 63 87 F1448 (internal article number)

CNC Thread rolling and gear burnishing machine, ESCOFIER P440 CN, CNC Siemens, New 2004 - like new, 2-roll, 2 moving heads, 4000 daN rolling pressure, workpiece diameter: 100mm max., tool diameter: 180-245mm, Swivelling: +/-6°,, forward speed: 0.1-20mm/s, reverse speed: 0.1-30mm/s, motor power: 8.6kW, New: 2004, Condition: like new, under power in our warehouse, Mimu Machine Tools (Italy)

Sensor-actuator distributor, distribution strip, distribution box, HV distributor, HV distributor -Manufacturer: Escherich, High Voltage Distributor -Type: 100082 (ES108) HVD-05 -Quantity: 2x distribution block available -Price per piece -Dimension: 130/120/H50 mm -Weight: 0.5 kg

EPSM / Biological Safety Station ESCO AIRSTREAM PLUS (AC2-5E8-TU) 1.5m New equipment in its original packaging Complete package including: PSM ESCO Airstrem plus class II AC2-5E8-TU with a length of 150cm (1.5m) A UV-30A UV lamp A fixed stand with levelling feet Height: 71cm SAL-5A0 GEN2 2 internal sockets TüV NORD EN 12469 certified model Automatic regulation and malfunction alarm and dry contact for alarm reporting Economical dual motors ensure permanent and stable flow control Removable stainless steel worktop, with a large work surface and inclined undermount for liquid retention LED lighting Control panel with clear flow display, glass position Quiet operation The PSM are equipped with 2 electrical outlets and a UV lamp Depth without armrest: 767 mm / with armrest: 823 mm Motorized front window, stops at working position External stainless steel arm rest on  ...

ESC-HIGH PRESS ´PLUS´ E3 Model 0 max. print size: 510 x 720 mm max. sheet size: 520 x 720 mm min. sheet size: 270 x 350 mm gripper margin: 10 mm Additional equipment: - RKS squeegee system - Antistatic device with control unit AFC-2 and SCPB electrodes 530 with cable length 180 cm including connector HV-4 - integrated cleaning station system TEKNEK in the machine inlet - equipped with ESC leading edge feeder A dryer can also be added /listings/3715380-used-wicket-long-term-dryer Find more here - /

Stainless steel tank, Mobile, tilting, double envelope, Tank bottom drain, Total volume 75 litres, Useful volume 50 litres, Dimensions between wheel passage: 645 mm, tipping height: 560 mm, Volume: 76, Useful volume: 50 L , Pneumatic: 2 bar , Cover diameter: 440 mm, Bottom tank outlet diameter: 36 mm, Mobile tank: Yes, Double envelope: Yes, Dimensions (mm): 850x850 H 1250, Side tapping: 1, Tank bottom outlet diameter: 36 mm

capacity 90 degrees: round: 172 mm capacity 90 degrees: square: 170 mm : 170 x 170 dimensions of saw-band: 2035 x 20 x 0,9 mm dimensions: 430 x 960 x 520 m band speed: 30 - 80 m/min total power requirement: 1,5 kW weight of the machine ca.: 38 kg SPECIAL PRICE Berg & Schmid - Assembly band saw PBS 171 ESC Powerful and particularly robust metal band saw Aluminum die-cast saw table and infinitely variable cutting speed for Miter cuts up to 60° Optional: machine base type 20508 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Code: 0389 Brand: ISVE Model: ESC JUNIOR 5 - CE Standard Vacuum dryer for drying timber planks, with top opening particularly suitable for carpenter workshops with problems of space - CE Standard Features: Top opening means that the whole length of the autoclave can be used without having to extract the carriage, thus drastically reducing the overall size The machine, operating at low temperatures, allows the timber to lose its water content without subjecting it to thermal changes which can cause cracking and warping The evaporated water which remains in suspension in the container keeps the drying material surface continuously humidified, avoiding in this way the formation of small cracks where in other drying systems is quite frequent The humidity level which is necessary between environment and material is constantly maintained by a condenser which precipitates the stea ...

capacity 90 degrees: round: 105 mm capacity 90 degrees: square: 100 mm : 100 x 105 dimensions of saw-band: 1335 x 13 x 0,65 mm dimensions: 650 x 310 x 300 m band speed: 30 - 80 m/min total power requirement: 0,95 kW weight of the machine ca.: 18 kg Action Price Berg & Schmid - assembly band saw PBS 90 ESC Powerful and particularly robust metal band saw with Die-cast aluminum saw table and stepless cutting speed for Miter cuts up to 60° Share of freight costs: EUR 25. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DEFROSTER-MIXER FOR VEGETABLES WITH ROTARY DRUM, MECALSA, TYPE: MC ESC TRL Technical description: Heating: Direct steam Voltage: 380/440V Frequency: 50/60 Hz

General SKU385T1160 MakeEsco-Labor LocationBarneveld TypeEL-10 Main Features MaterialStainless steel Volume12.5 Ltr. Motor0.14 KW Specified Features - Processing vessel Closed stirring vesselcheck Capacity±12.5 Ltr. Vessel sizesDia 240x275 mm Flat top sidecheck With covercheck Top connectionsDN 50, 12 mm(2x) Outlet28 mm Half coil jacketedcheck With anchor stirrercheck Motorindur antriebtechnik AG, 0,14 kW, 180 Volt With homogenisercheck MaterialStainless steel With jacketcheck General No.365/1 Year of construction1991 Mounted on legscheck With switchgearcheck Floorspace1x0,55 m Total height1,3 m Weight180 kg Extra SpecificationsMotor on cover: esco-labor x40/38, factory no: 749, 220 Volt, 1.7kW, 22000rpmVacuum pump : type N726.3 FT.18, NR:689428, 220 Volt, 0.15 kWProcessing vesselsEsco LaborProcessing vessels > Processing vesselsBrand > Esco Labor What yo ...

General SKU391U1101 MakeEsco-Labor LocationBarneveld TypeEL1 (glas) Pressure Vacuum possiblecheck Main Features MaterialGlass Volume1 Ltr. Motor0.75 KW Specified Features - Processing vessel Closed stirring vesselcheck Capacity 1 liter Vessel sizesDia. 120 mm x 150 mm Dished bottomcheck Flat top sidecheck Top connectionscheck Outletcheck With jacketcheck With anchor stirrercheck Motor65 W (3500 rpm) Speed mixing shaftmax 540 rpm With homogenisercheck Motor750 W (2800 rpm) MaterialGlass, Stainless steel Information No.635/1 Year of construction1993 Mounted on legscheck With switchgearcheck Floorspace1 x 0,5 m Total height0,75 m Weight40 kgProcessing vesselsEsco LaborProcessing vessels > Processing vesselsBrand > Esco Labor What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any  ...

TBVE (TVE-ESCALE) ESCALE – Three Bath Open Width Washer Model: High Efficiency Washing Range (Washing Range – ESCALE) Manufacturer: TVE-ESCALE (TBVE Group) Year of manufacture: 2023 Condition: Good, fully operational Configuration: 3-bath open width washer with 3 evacuation (vacuum) slots – one per scour bath Documentation: Manual available Status: Available for sale Three heated wash bays, counter flow, working width of 2800mm fabric specs of 100gsm – 400 gsm (can be used on heavier cloth successfully) all plc controlled with three evac slots (one on each wash bay) input from roll or plated, output plated. --------------------------------------------------------------- Machine Description The TVE-ESCALE High Efficiency Washing Range is an industrial open-width textile washer designed for high-quality washing, scouring, and bleaching of fabrics. The system combines bath ...

Manufacturer: ESC Model: ESC-AT-60PD Type of Machine : Screen Printing Machine Semi-automatic, universal, digitally controlled precision screen printing machine for flexible and rigid materials up to 200 mm material thickness STANDARD EQUIPMENT/FEATURES - Programmable PLC control system - User-friendly operation via touch screen - High-quality linear guides for smooth, low-noise motion - Vertical, motor-driven screen frame lifting with synchronized stripping motion - Precision print head with pneumatic lift for screen change and cleaning - Digital input of desired print parameters: - Speed for print and flood squeegee - Print height - Print stroke length - Neutral position for print and flood squeegee - Single-function control for setup operation - Single-cycle operation via foot switch and automatic cycle mode - Extremely short setup times without the need for tools - Pneumatic scr ...

Manufacturer: ESC Model: Continuous Dryer Perfecton S with UV Year of Manufacture: 2020 Technical Specifications Heating Chamber 80°C - Galvanized nozzle plate - Process fan: TRZ 250-3 - Indirect air intake from process room - Recirculated air volume: 3,400 m³/h at 510 Pa - RRH heating register: 18 kW at max. 80°C - Drive motor: 2.2 kW / B3 / 1,410 rpm / insulation class F - Length: 2,000 mm Cooling Chamber - Process fan: TRE 250-3 - Supply and exhaust air volume: 3,400 m³/h at 800 Pa - Stainless steel drip tray for process fan - Drive motor: 2.2 kW / B3 / 1,500 rpm / insulation class F - Without cooling register and refrigeration unit - Length: 2,000 mm Discharge Element - Steel drive roller with rubber coating - Mounting for belt drive - Length: 500 mm Construction Details - All hoods and cladding panels made of electrolytically galvanized steel sheet - Heating chamber h ...

Manufacturer: ESC Model: Continuous Dryer Perfecton S Year of Manufacture: 2021 Technical Specifications Heating Chamber 80°C - Galvanized nozzle plate - Process fan TRZ 250-3 - Indirect air intake from process room - Air circulation volume: 3,400 m³/h at 510 Pa - Electric heating register: 18 kW at max. 80°C - Drive motor: 2.2 kW / B3 / 1,410 rpm / ISO F - Length: 2,000 mm Cooling Chamber - Process fan TRE 250-3 - Supply and exhaust air volume: 3,400 m³/h at 800 Pa - Stainless steel drip tray for process fan - Drive motor: 2.2 kW / B3 / 1,500 rpm / ISO F - Without cooling register and chiller - Length: 2,000 mm Discharge Element - Rubber-coated steel drive roller - Mounting for belt drive - Length: 500 mm General Construction - All hoods and cladding panels made of electro-galvanized steel sheet - Heating chamber hoods are insulated DIMENSIONS - Belt width: 1,700 mm - B ...

This ESCO Escomatic EC12 was manufactured in 2010. A Swiss type turning machine, its ideal for precision and efficiency in small part production. Contact us for more information about this machine.

General SKU224X117 LocationBarneveld Main Features MaterialStainless steel Motor3 KW Surface1.7 m2 Specified Features - Roll dryer Roll coolercheck Rolls chromium platedcheck Roll surface1,7m² Roll sizesDia. 600x600 mm Cooling mediumcheck (Glycol) Feeding with rollscheck With knife dischargecheck Motor3,0 kW, (380 V, 2700 rpm) With variable speed drivecheck frequency converter Roll speed22 rpm MaterialHard chrome Information MakeEscher Wyss Year of construction2010 Mounted on framecheck With switchgearcheck Floorspace2,80x0,90 m Total height1,50 m Weight2150 kg Extra SpecificationsWith control cabinet, dimensions 0,80x0,30x1,80 m, - with scraper knife, length 600 mm, : - jacketed aplication roll, dimensions 600 mm, 0,75 kW, 240/380-415 volt, 2700 rpm, roll speed 17 rpm, : - product application tray with jacket -pneumatic knife control and wall control, -ins ...

General SKU279U510 MakeEscher Wyss LocationBarneveld TypeFTK 135/450 Main Features MaterialMild steel/Stainless steel Motor0.6 KW Surface1.35 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Surface1.35m² Bed sizes3000x450 mm Product inlet450x200 mm Product outletDia: 80 mm Number of sections:3 Air inletDia:380x300 (3x) Air outletDia: 270mm Vibro motor0,6 kW,220/380 volt, 980 rpm (2x) Without motorcheck MaterialMild steel, Stainless steel 1.4301 (304) With jacketcheck General No.2710214 Year of construction1980 Mounted on mild steel framecheck Floorspace3,8x1,03 m Total height2,7 m Weight2000kgFluid bed dryers continuousEscher WyssDryers > Fluid bed dryers continuousBrand > Escher Wyss What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destinat ...

General SKU201P083 MakeESCHER WYSS TypeH100 No.2652 Year of construction1979 LocationBarneveld Main Features MaterialStainless steel Motor37 KW Inlet diameter1000 mm Specified Features - Peeling centrifuge Peeler centrifugecheck Capacity180 Ltr Basket sizesdia.1000mm x600mm Max. loading weight232 Kg Hydraulic drivecheck With hydraulic unitcheck Motor+/- 37 kW, 380 Volt With variable speed drivecheck Max. basket speed1530 rpm With hydraulic unitcheck Motor0,75 kW Inletdia.155mm Solids outlet200x200 mm (screw) Liquid outlet440x185 mm MaterialStainless steel Information Mounted on foundation platecheck Floorspace3,4x1,6 m Total height2,3 m Weight3600 kgPeeling centrifugesEscher WyssCentrifuges > Peeling centrifugesBrand > Escher Wyss What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping  ...

CNC control, control panel, control desk, control unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards, control card, circuit board -Manufacturer: KUKA LP electronics, control plug-in cards printed circuit boards -Type: ESC-CI V1.40 -Item No.: 00-106-290 0018 -Dimensions: 255/160/H45 mm -Weight: 0.8 kg

Power supply, power converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, dual power supply -Manufacturer: Escherich high-voltage power supply Power Unit 55 FC -Type: PU55 FC-230V / ES023 -Voltage: 230V/50-60Hz -Quantity: 2x power supply available -Price: per piece -Dimension: 235/120/H140 mm -Weight: 2.9 kg/pc.

Size: 300 x 450 mm Equipments: max. screen frame size 500 x 750 mm table height 945 + 30 mm screen lift height 300 mm max. printing speed 100 - 500 mm/sec. max. cycling speed 800 p/h mains supply 220, 50/60 V / Hz working pressure 5 - 7 bar dimensions (LxWxH) 920 x 750 x 1710 mm weight approx. 245 kg

Four identical screen printing machines ESC are available. Rigid material thickness: 200mm, max. print format X/Y: 400mm/600mm, vacuum plate dimensions X/Y: 500mm/700mm, vacuum area dimensions X/Y: 405mm/600mm, max. frame dimensions X/Y: 600mm/940mm, frame profile range: 25mm-47mm, max. print material thickness: 200mm, working height: 960mm, frame lift: 270mm, printing speed range: 125mm-750mm/s, max. cycle rate: 600p/h, fine adjustment: +/-10mm, squeegee angle adjustment: +/-9°, working pressure range: 5bar-7bar. Machine dimensions X/Y/Z: approx. 1300mm/1100mm/1600mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible. Individual sale possible.

A continuous drying system ESC for printing use is available. Heating chamber: fan type: TRZ 250-3, length: 2000mm, recirculated air volume at 510Pa: 3400m³/h, max. temperature: 80°C, heating capacity: 18kW. Cooling chamber: fan type: TRE 250-3, length: 2000mm, air volume flow: 3400m³/h. Belt height: 900mm, discharge element length: 500mm, infeed length: 1200mm, zone lengths: 2000mm, system width: approx. 2250mm, total length: approx. 10700mm. Documentation available. An on-site inspection is possible.

A continuous drying system ESC with an integrated UV intermediate module for printing use is available. Heating chamber: fan type: TRZ 250-3, length: 2000mm, recirculating air volume at 510Pa: 3400m³/h, max. temperature: 80°C, heating capacity: 18kW. Cooling chamber: fan type: TRE 250-3, length: 2000mm, air volume flow: 3400m³/h. UV intermediate module: belt width: 1700mm, emitters: 2, max. emitter power: 120W/cm. Belt height: 900mm, outlet element length: 500mm, inlet length: 1200mm, zone lengths: 2000mm, system width: approx. 2250mm, total length: approx. 10700mm. Documentation available. An on-site inspection is possible.

PSM / 900mm Biological Safety Station ESCO AIRSTREAM AC2-3E8 Material in excellent condition Year of manufacture: 2020 Complete package including: PSM ESCO Airstrem class II AC2-3E8 length 90cm (0.9m) A fixed support, base with levelling feet 2 internal sockets Type: Microbiological Safety Station Protection: Product + Person + Environment Width: 900mm Opening system: Manual sliding glass Flow Technique: PSM Initial Airflow Speed (m/s): Intake: 0.45 / Downward: 0.30 External dimensions: 1035 x 753 x 1400 mm (W x D x H) Internal dimensions: 915 x 580 x 654 mm (W x D x H) Weight: 191 kg (excluding base) Model: AC2-3E8 Air volume: Inlet: 258.2 m3/h / Downhill: 552.2 m3/h / Exhaust: 258.2 m3/h

A total of five identical ESC screen printing machines with different years of manufacture are available. Vacuum dimensions X/Y: 405mm/600mm, max. print dimensions X/Y: 400mm/600mm, vacuum table dimensions X/Y: 500mm/700mm, max. frame dimensions X/Y: 700mm/800mm, frame profile range: 25mm-54mm, max. substrate thickness: 300mm, max. cycle output: 800p/h, machine dimensions X/Y/Z: approx. 1250mm/950mm/1600mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible.

ESCHER Spiral Mixer M-500 R-P - Used machine, little used, year of manufacture: 2021 - for 300 kg flour or 500 kg dough, kettle volume 700 litres, Boiler, kneading arm and middle rod in stainless steel, Boiler lock and boiler drive by patented cone system, two timers, two speeds, automatic switching from low to high speed, hydraulic lifting and lowering of the machine head, closed flour dust protection hood made of stainless steel, Machine incl. two tank cars

Homogenizing Machine Manufacturer: EscoLabor Type EL-3

A semi-automatic ATMA flat-bed screen printing machine is offered. Max. print size X/Y: 400mm/600mm, vacuum table dimensions X/Y: 500mm/700mm, max. screen frame size: 700mm/950mm, min./max. screen frame profile height: 25mm/54mm, max. substrate thickness: 120mm, working height: 940mm, screen frame lift: 300mm, min./max. printing speed: 125mm/s/750mm/s, control: PLC. machine dimensions X/Y/Z: 1300mm/1060mm/1600mm, weight: 485kg. Documentation available. Inspection possible by appointment. The terminology flat-bed screen printing machine, vacuum table, screen frame lift and PLC follows established industry usage.

weight max. in kg: 2000 kg fork length: 1150 mm stroke height: 200 mm : 570 mm : 160 mm : 82 mm : bis 2000 kg weight of the machine ca.: 0,1 t dimensions: 1,5 x 0,54 x 1,21 m Exhibition unit pallet truck with - Scale - Castors PU - Tandem PU load rollers - Tare function / weighing function The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Systec/ESC 2-color flatbed screen printing system is available. Processes: unwind unit, printing unit 1, intermediate module, printing unit 2, rewind unit. Unwind unit: Systec, intermediate module: Systec, rewind unit: Systec, printing units 1/2: ESC. Max. print format: 300mm/450mm, vacuum table dimensions X/Y: 400mm/600mm, vacuum surface dimensions X/Y: 345mm/465mm, max. frame dimensions X/Y: 500mm/750mm, print material thickness range: 0mm-50mm, working height: 945mm, printing speed: 500mm/s, max. cycle rate: 800pcs/h, fine adjustment: +/-10mm, squeegee angle adjustment: +/-9°, unwind roll diameter: 600mm, unwind roll spindle diameter: 3in, vacuum boxes: 3. Machine dimensions X/Y/Z: approx. 7900mm/1400mm/1950mm. Documentation available. An on-site inspection is possible.

CNC Thread rolling and gear burnishing machine ESCOFIER P440 CN CNC Siemens New 2004 - like new 2-roll 2 moving heads workpiece diameter: 100mm max. tool diameter: 180-245mm Swivelling: +/-6°, forward speed: 0.1-20mm/s, reverse speed: 0.1-30mm/s motor power: 8.6kW New: 2004 Condition: like new This machine can be inspected under power in our warehouse in Gussago BS (Italy) Mimu Machine Tools

cutting diameter: 305 mm capacity 90 degrees: flat: 350 x 200 mm capacity 45 degrees: round: 250 mm capacity 45 degrees: flat: 230 x 200 mm capacity 60 degrees: round: 175 mm capacity 60 degrees: flat: 170 x 100 mm cutting speed: 18 - 110 m/min vice: max. 350 mm dimensions of saw-band: 3370 x 27 x 0.9 mm engine output: 1.5 / 1.8 kW weight of the machine ca.: 880 kg range L-W-H: 1700 x 2200 x 2000 mm Equipment: - robust, electro-hydraulic fully automatic band saw - user-friendly controls - Mitre cuts left to 45 . possible in automatic mode - Mitre cuts up to 60° . only possible in semi-automatic mode - Hydraulic power unit with automatic . pressure cut-off when idling - Stationary base frame with large chip drawer and automatic cooling system - infinitely variable saw blade speed adjustment (ESC) - rotating chip brush - remnant min. 80 mm - operating instructions (PDF) The data for  ...

Condition: New (traces of storage available) Part Number: 8256016 Serial Number: 19293766 Type: 1724 Suitable for: Mitsubishi S12R

Tubular frame lock, locking body, door fitting, mortise lock, escape door lock, panic mortise lock -Manufacturer: BKS, mortise lock panic mortise lock, unused Ovp -Type: B-21160-02-R-8 -Number: 4x mortise lock available -Price per piece -Dimensions box: 240/140/H30 mm -Weight: 0.9 kg/piece

Nr 2 ladders with platform, equipped with: wheels, handrails and upper safety railing. Stair measurements: 155x70x325cm; Platform height: 225cm. Items sold in unverified status. Items not subject to sales restrictions Auction-ID: A7-48361-104

Exhibiting device Pallet truck with - Scales - Swivel castors PU - Load rollers Tandem PU - Tare function / weighing function Load capacity in kg 2000 kg Fork length 1150 mm Lifting height 200 mm Fork width 570 mm Tine width 160 mm Underride height 82 mm Weighing range up to 2000 kg Machine weight approx. 0.1 t Auction-ID: A7-48486-115