esab plasma used for sale

ESAB EAGLE 2000 plasma cutting machine was built in 2009 in Germany. The machine is designed for machining stainless steel, structural steel, low-alloy steel and aluminium with a maximum thickness of 30 mm and has a very stable and vibration-free welded construction. Excellent cutting precision with simultaneous low operating costs is ensured by the ESAB Precision Plasmarc 201 plasma source with a power of 200 A, which generates a narrow plasma beam with high energy density per small area of material. The plasma cutting machine portal was fixed by two dynamic servo drives operating with low backlash on the machined profile rails (X axis). The dynamic servo drive in the transverse carriage drives the spur gear, which then meshes with the toothed bar of the machine portal, causing transverse movement (Y axis). The plasma cutting machine is equipped with an ESAB CNC control with the late ...

CNC plasma cutting system Esab Pegasus Working area: 4x2m Esab Precision Plasma 100A, with PT24 burner automatic gas mixing console (+1 complete, new gas mixing console as replacement), complete documentation; in good condition, without suction many new and original slip parts (Duesen; electrodes), as well as other spare parts. assembly and commissioning on request; ready for immediate use

Machine type: ESAB SXE-P-5000 NC/-CNC type: CNC version 52 Year of construction: 1995/Refurbishment and conversion 2009 track width: 5,000 mm track length: 34 000 mm cutting range: width 4 000 mm Laenge 18,000 mm runway height 700 mm table height 700 mm Head: 2 head 1: Cutting head head 2: marking unit water basin: 3 sinks sinkable to cut underwater. Power sources: 2 connected in parallel 400 A cutting is possible in the VA range up to 100 mm cutting cutter, soft fillers up to max. 50 mm. The plant is in operation. Complete data about the retrofit on request ; ready for immediate use

; ready to use

; ready for immediate use

; ready for immediate use

Plasma cutting machine ESAB working area 1500 x 3000 1 x autogen up to 200 mm 1 x Plasma Hifocus 160 i with automatic gas console. see PDF document several plasma change torches available Very well maintained from: 10 / 2012; ready for use

; ready for immediate use

Burner types: PT - 600 and PT - 15 XLS plasma power source: ESP 200; 100-160 volts; 40-200 A cutting method underwater Plasma cutting cutting table L:6,7xB:1,63xH0,79m Trafo ESAB ESP200 L:1,05xB:0,55xH:1.1m/330kg Portal; Rails x-way 7500 mm y-path 2700 mm Welding speed 2-750 IPM m/min Control CNC Vision 1000 cutting width y=max. 2438 mm thickness unleg. Steel=50.8 mm thickness of alloyed steel=38 mm thickness Alu=32mmmm burner cod1 piece Adjustment burner=approx. 150mmmm Total power requirement 39.8 kVA machine weight approx. 4.0; ready for immediate use

Esab CXD 3000 P Working range: 14000 x 2500 mm 2006 completely overhauled , new control system, new plasma system installed. 1x Plasma Plasmaarc 200 Cutting up to 40mm Burning table 2 x 6m inclusive Without burning tables , without filter system assembly and commissioning on request; ready for use

CNC Portal Plasma Cutting Machine Manufacturer: ESAB Eagle 2500 Year of construction: 2004 Control: Vision DNC Connection track width: 2,500 mm runway: 5 m Working area: 2 x 3 m Extraction table 1 plasma torch with power source Kjellberg HiFocus 160i automatic gas console (see PDF) cutting tools: up to 25 mm filter cutting system: Columbus Immediately available ; ready for immediate use

Esab UXD - P 2500 Control NCE 290 1 x Plasma: Kjellberg PA S 40 cut up to 30mm 1 x Autogen Support Working area: 2500mm x 3500mm Including suction machine has two-sided drive and is very well maintained. commissioning on request ; ready for immediate use

Esab Combirex DX 3000 Working range: 2500mm x 4000mm 1x Plasma Support CNC Portal Plasma Cutting Machine Manufacturer: ESAB Type: Combirex DX 3000 Built: 2015 Control: Vision T5 Track width: 3,000 mm frame: 6000mm Working range: 2500mm x 4000 m suction table 1 plasma torch with power source m3 202 torch PT 36 Cutting rods: Punching: 38 mm Cutting: 45 mm laser pointer filter system ex protected cutting software: Columbus Very low operating hours commissioning on request

CNC Portal plasma cutting machine Manufacturer: ESAB Eagle 2500 Year of construction: 2004 Governance: Vision DNC connection Track width: 2,500 mm Career length: 5 m Work area: 2 x 3 m Vacuum table 1 plasma torch Kjellberg HiFocus 160i power source automatic gas Console (see PDF) Cutting thickness: up to 25 mm quality section Filter system Cutting software: Columbus Now available

ESAB CXD 3000 P Work area: 14000 x 2500 mm 2006 completely overhauled, new controls, new plasma system installed. 1 x plasma Plasmaarc 200 Cutting up to 40mm 2 x 6 m including burning table Without firing tables, without filter system Installation and commissioning on request

This ESAB SXE-P14500 SUPRAREX Plasma Cutting Machine was made in 2008. It is equipped with an ESAB Vision 52 control unit.

This ESAB Suprarex SXE-HD 3500 Plasma Cuttting Machine was manufactured in the year 2014 in Germany and has 10 production hours.

Working table dimensions: 1500x3000mm, including filtration system and Plasma Device HYPERTHERM Powermax 1000.

CNC flame cutting machine make ESAB type Numorex NXB 6500Machine -No: 89022, built in 1989Track width: 6500 mmTrack length: 12000 mmCutting table height: 700 mmNumber of burners: 6 oxy-fuelType of control: CNC 510With- Extraction systemused, from large company, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Plasma Cutting/Oxyfuel ESAB Numorex for sale Technical data: - Plasma source: 240/360 A - Bevel plasma torch for chamfer cutting - Vibrating suction bench for evacuating pieces - Smoke extraction system.

Plasma hose package, welding torch, MIG/MAG torch -ESAB type: PSF 410 Cw -Hose package: water-cooled -Spring contact -Length: 3.25 m -Price: per piece -Number: 2 pieces -Weight: 3.2 kg

Table width 6000 mm Table length 14000 mm Burner heads 3 Control VISION PC Total power requirement 30 kW Space requirement approx. 24 x 9 x 3.5 m Plasma cutting capacity: 1 - 25mm Oxyfuel cutting capacity: up to 100mm Modernization of the machine in 2013 1 x refit with new B3 plasma trolleys 1 x Kjellberg HiFcous 161i 2 x PerCut 210 quick-release head Submission deadline by arrangement

CNC plasma cutting machine with exhaust air system from Dodek Cutting source: Hypertherm powermax 85 Cutting program: ESAB Vision T5 from 2021

Suprarex 3500 (width 3500mm) with plasma M3 of the second generation (G2) and with WIC (water clearance for the possibility of cutting under water). The machine was bought mainly for cutting stainless steel. Of course, it can also cut carbon steel or aluminum (it can only be cut separately). Basic consumable parts for the burner are also included. The machine was practically never used and cut for a total of 1 hour (started up and tested).

This ESAB Suprarex SXE 5000 Plasma Cutting Machine was manufactured in the year 2012 in Germany. It is equipped with a ESAB control unit with english main language. This machine has a Kjellberg main drive. It can be included 2 Kjellberg HiFocus 280i Plasma Sources and 2 Kjellberg KWE 360 Hot Wire Units with the machine.

Technical data: Max height of welding 4,000 mm Max Schweissllänge 4,000 mm with ESAB A6 control

Technical data: 1 drive unit / 1 revolving unit maximum load 20 to. Roll diameter 470 mm Roll width 250 mm Drive unit dimensions 2800 x 1300 x 1600 mm Unit 2800 x 1100 x 1600 mm, running with dimensions

; Available from 37 KW 2016

CNC Portal Cutting Machine Manufacturer: ESAB Type: SXE P1 3500 LH Year construction: 2001 CNC control: Vision 51 Working area: 2x6 m Track: 8 m 2 x car use burner under power to visiton request dismantling and commissioning on request; available from 37 KW 2016

Qty. 1 Second-hand taper pole pipe production line We have following taper pole pipe production line for sale Mfc.: CMF, Delem, Merkel, Bosch, Nachi, YSD, ESAB, (France, Korean, Japan and Chinese Manufacturer) Built: 2006 Stopped: 2012 3. Product Capacity: Profile 5,000 ton/year / Round pipes 10,000 ton/year i. (Capacity : Profile 6.9 pcs/Hr, Round 3.6 pcs/Hr) Price: Please provide us with your offer! (Further information can be submitted on request!) Production Description Size for Product Pole or Pipe type Conical Pole PolygonalPole Round Pipe Thickness mm 2.6,3.7,5.2,7.5 10 2.6,3.7,5.2,7.5 10~20 20~38 O.D mm ?190 ~ ?463 ?190 ~ ?820 22”~ 32” Length M 2.45 ~ 16.0 2.45 ~ 16.0 6.2 ~ 12.8 Rake About 0.43° About 0.43° Intensity Mpa T.S=510, Y.P=360 T.S=510, Y.P=360 T.S=650, Y.P= 50 ...

Technical data: Max height of 4,500 mm / 4,600 mm Maximum throat depth 4,500 mm / 4,000 mm Welding source ESAB, LCA1200 / ESAB TAF 1250DC Welding machine carrier 1 x without welding equipment broken demotiert Type: MH45. 2 / BODE DSCN 3109

Amperage range maximum: 0 A Amperage range minimum: 0 A aligning for sections of a growing line ideal for wind tower, vessel, pipemills with rail bogie driven Load capacity per section:30 + 30 T Vessel range Minimum:    1500Ø Vessel range Maximum:    6500Ø No of wheels per section:4 Number of matching pieces:2 Length:                  4.500 mm  Width:                   2.200 mm  Height:                  1.000 mm  Weight:                  2885 + 3885 kg 

The machine is available for immediate delivery. The suction table is not included.

Technical data: -Capacity approx. 200 kg -Throat depth 800 mm -Working height in horizontal position approx. 1000 mm -Mot boom. left + right swivel - arm arm manually Tiltable -Mot face plates. left + right rotatable - faceplate speed infinitely variable - faceplate diameter 300 mm - adjustable control panel with control make ESAB, type 6 PTF, BJ. 97 - space requirement approx. B H 1100 x 1300 X 1600 mm -Weight approx. 300 kg

CNC Portal Laser Cutting Machine Manufacturer: ESAB Type: Alpharex AXC 7000 Built: 1998 CNC control: NCE620 Working range: 5,000 mm x 27,000 mm Laser type: TLF 4000 t Suction table: Beuting without suction

ESAB SXE-PI 3500 LH PT-24 plasma / oxy-fuel cutting system N.3 TORCHES AND N.1 PLASMA TORCH CUT FROM mm 1 TO mm 200 MAX SHEET 2500x3000

ESAB LAE 800 welding device The machine is located in France.

CNC Portal Cutting Machine Manufacturer: ESAB Type: Suprarex SXE-P1 4000 Built: 2009 CNC Control: Vision55 2 autogenous burners 1 plasma burner with power source Kjellberg HiFocus 160i Track width: 4,000 mm Working width: 2,500 mm Track length 18 m (shortenable) without table without filter

Post welding wire and electrodes approx. 1,000kg New, unused, original packaged. Posten Welding accessories consisting of Welding dredging roller for inert gas welding machine MIG MAG Predominantly welding wire diameter 1.2mm, per roll 15kg z.B. Union A 600 IG Various electrodes e.B. Nickel A Originally packed in a cardboard box and sealed by welding in kunsstof film. Special price

equipped with: wheels; 5m cable welding torch; 4m ground cable PLEASE NOTE: C02 bottle not included

welding current: 10 - 180 A open-circuit voltage: V connected load frequency: 230 V weight: 6,8 kg Dimensions (LxWxH): 403 x 153 x 264 mm Accessories for inert gas welding machine: Hose package 4m. Earth cable 4m Accessories for inert gas welding machine: Hose package 4m. Ground cable 4m Welding wire 1 roll, Pressure gauge Welding wire 1 roll, Pressure gauge With nozzle and gas nozzle List price: 2200, -EUR The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

including various boxes of electrodes, scaler and welding helmet

CAUTION: This is a separate device without accessories; device is defective and the plug is missing!

Please note! without bottle

without torch, ground clamp and cables

current intensivity: 400 A open-circuit voltage: 65-75 V IP protection class: IP21 Permissible load at 35% duty cycle 400 A at 60% duty cycle 315 A at 100% duty cycle 250 A Idle power 0.49 kW Application class: S - Water cooled - With hand and foot remote control - Incl. Hose package approx. 6000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

With MIG/MAG Welding System Messer Griesheim LG1200, including accessories, documentation and tests according to accident prevention regulations (UVV), an on-site inspection is possible.

Max. electrode force: 12.7kN, nominal power: 3x 80kVA.

table width: 6000 mm table length: 27000 mm burner heads: 5 cutting width: 4000 mm control: Vison T5 Vers. 4 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC Gantry Flame Cutting Machine Incl. extraction Cutting range 24 x 4 m Total table size 27 x 6 m Marking unit 4 oxyacetylene burners (mixed gas) and a 3-phase unit (acetylene). The respective conversion kits to the standard version are still available. Machine can be inspected under power. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Portal width: 6500mm, track length: 16,000mm, number of burners: 4, with documentation.