130,790 used machines on RESALE, but how to find them? Machine Search
ERIKA RECORD dough dividing and warp knitting machine Automat Type 4 - used, refurbished in 2023 - Type 4, 30 pieces, working range 40 - 120 g removable plastic dough enclosing ring Piston with non-stick coating Swivel machine head for easy cleaning Dividing knife electrolyt-plated four active times and active time switch-off (parts/presses only) no oil in the working area of the machine Machine with heavy casting stand for vibration-free operation Long-lasting, low-wear drive complete with three plastic knitted plates
ERIKA RECORD dough dividing and warp knitting machine semi-automatic type 4 - exhibition machine, brand-new condition, year of manufacture: 2025 - Type 4, 30 pieces, working range 40 - 120 g removable plastic dough embracing ring dough piston with non-stick coating tiltable machine head for easy cleaning dividing knife electrolyt-plated no oil in the working area of the machine machine with heavy casting stand for vibration-free operation complete with three plastic moulding plates
Erika Record Gr. 7 20 pcs dough dividing and knitting machine Year:2017 - Manufacturer: Erika Record Karl Schmidt GmbH - Semi-automatic roll press - To share and make an impact - Weight range: 70gram to 160gram - Type: 7 20 pcs - 20 pieces - 400 Volt 0.75kW 50Hz - Year of construction 2017
A bread roll machine TWA Erika is available. Dough system range: 750g-2550g, product weight range: 20g-85g, machine dimensions X/Y/Z: approx. 700mm/600mm/1700mm. Including three rounding plates. An on-site inspection is possible.
Dough dividing and rounding machine ERIKA RECORD, type: Automatic machine No.3 -Refurbished- - For precise dividing and rounding of a wide variety of dough types - Fully automated workflow - Machine parts in oil bath (no lubrication necessary) - Machine head can be tilted, for better cleaning - Dough-friendly operation - Easy to use - Stainless steel side plates - Number of divisions: 30 pieces - Body size: No. 3 - Dough weight: 30 - 100 g - Capacity: approx. 10,000 dough pieces/h The machine has been completely overhauled and is in excellent condition.
Bread Press Erika Record Automat Erika Record Automat 30pcs Part head NEW revised Stainless Steel Knife NEW only DGUV V3 tested by us Connection 400V, 16A-CEE plug Used machine overhauled Warranty
Roll Press Record Machine Dough part and knitting machine Erika Record Automat Roll press for dividing and rounding with knitting plate Connection 400V, 16A-CEE plug Used machine
Erika Record Automatic 3-30 Roll Press Dough Dividing and Casting Machine - Manufacturer: Karl Schmidt GmbH - Model: Erika Record Automat - Type: 3-30 - 30 pieces - Incl. 3 plastic knitting plates - Machine is mobile on castors - Machine is technically and optically in very good condition Technical data: - Weight range : 30gram to 100gram -Dough insert: 900 grams to 3000 grams - Year of manufacture: refurbished 2016 - 400 volts
Roll Press Record Semi-Automatic Parting head NEWLY revised Stainless Steel Knife NEW with 3 knitting plates only DGUV V3 tested by us Connection 400V, 16A-CEE plug Used machine overhauled & SAB tested with warranty + spare parts service
used bread press Record Erika Automat Classic Q2 30 pcs, checked, with knitted plates, for 30 pieces, weight range from 25 to 120 g, mesh no. A110311, 1.5 kW, 3.8 A, 380 V, 50 Hz
Semi-automatic bun-rounding press chops and rounds; divides dough into 30 pieces; power 380 V / 50 Hz/ 3; set includes 3 press plates
Manufacturer: Maffel Erika, Type: Erika 60, kW output per motor: 1800 Watt, FREE TEXT: Maschine läuft ohne Anschläge 220 Euro inkl.Mwst,
Height=1.6 m, Overall length= 0.66 m, Overall width= 0.7 m, Producer: Erika power: 380 V/ 50Hz Made in USA Description Semi automatic rounder Erika divides and rounds divide-rounded to 30 pcs 3 moulding plate
saw blade diameter: 315/350 mm capacity 90 degrees: round: 125 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 160x90 mm capacity 45 degrees: round: 105 mm capacity 45 degrees: square: 90 mm capacity 60 degrees: flat: 80x100 mm total power requirement: 1,8/2,5 kW weight of the machine ca.: 0,2 t dimensions of the machine ca.: 0,6 x 1,22 x 1,06 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diameter: 250 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Record Panda1000 flow wrapper Serial: 300376 flow wrapper, adjustable temperature jaws and crimpers, infeed length 1500mm, overall length 3500mm, variable speed, jaw width 300mm, 3Ph
Machine vice, sturdy vice, drill press vice -Jaw width: 160 x 50 mm -Clamping depth: max. 110 mm -Dimensions: 460/160/H120 mm -Weight: 36 kg
Machine vise, sturdy vise, drill vise -Jaw width: 160 x 60 mm -Clamping depth: max. 130 mm -Dimensions: 480/160/H135 mm -Weight: 38 kg
Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck -Manufacturer: Roto Record, four-jaw chuck Ø 315 mm -Throughout: Ø 98 mm -Hole circle: Ø 290 mm -Weight: 30 kg
-) Working area X: approx. 3,300 mm -) Working area Y: approx. 1,300 mm -) Working area Z: approx. 300 mm -) Main engine: approx. 7.5 kW -) Tool change points: 2 x 24 pieces Fix and 1 x 10 with you -) Lock box unit: permanently installed -) Machine table: console table -) Positioning aid: Yes -) Workpiece special clamping system: Yes -) Software: SCM XILOG 3 -) Number of milling spindles: 1 piece -) Speed: 18,000 max rpm. -) Torque support: Yes -) Tool clamping system: HSK-F63 -) Design: boom machine -) Vacuum pump: Yes -) DXF interface: Yes -) Chip conveyor belt: Yes -) CE mark: J Yes -) Total connection: approx. 22 kW -) Weight: 9,600 kg
Face plate, face plate chuck, four-jaw chuck -Chuck size: Ø 355 mm -Admission thread pitch: 4 mm -Rezess: Ø 70 mm -Weight: 35 kg
Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 200 mm -Recess: Ø 160 mm -Bolt circle: Ø 180 mm -Passage: Ø 55 mm -Weight: 14 kg
Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Weight: 18.5 kg
Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 250 mm -Passage: Ø 80 mm -Weight: 19 kg
Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Weight: 24.5 kg
Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 160 mm -Hole circle: Ø 136 mm -Cone: Ø 115 mm -Weight: 11.9 kg
Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 200 mm -Hole circle: Ø 175 mm -Weight: 21 kg
SECOND-HAND WORKING CENTER SCM MOD. RECORD 1 - CE RULES - table mm. 2000X800 - year 1996
SCM machining centre model RECORD 220 : - Useful axis stroke 3250 x 1300 x 300 mm - workpiece useful passage 320 mm - 3180 x 1250 mm multifunctional worktop - 3+3 reference stops for pendulum machining - Becker vacuum pump of 250 mc/h - Centralized automatic lubrication - NUM 1040 electronic control, with Alphacam software - machine according to CE standards, with bumpers and perimeter protections - year of production 1998 - Machine weight kg 8100 Operating units: - vertical electrospindle with inverter 900 – 18,000 rpm, ISO30 connection, with 4th VECTOR rotary axis, served by an on-board tool changer 10-position (RAPID 10) - drilling unit with vertical axis with independent control and encoder, and with 39 spindles as follows: 15 vertical spindles on X-axis 14 vertical spindles on Y-axis 2+2 horizontal spindles on X-axis 3+3 horizontal spindle ...
Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 250 mm -Short cones: 11 -Recess: Ø 199 mm -Weight: 36.5 kg
Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 250 mm -Short taper: 11 -Rezess: Ø 199 mm -Weight: 35.8 kg
Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Weight: 25.8 kg
Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Chuck size: Ø 250 mm -Passage: Ø 83 mm -Rezess: Ø 210 mm -Weight: 17.3 kg
Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 250 mm -Passage: Ø 80 mm -Recess: Ø 209 mm -Weight: 21 kg
Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Short taper: 6 -Weight: 36 kg
Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 250 mm -Passage: Ø 80 mm -Recess: Ø 210 mm -Weight: 18.5 kg
Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Weight: 19 kg
Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Chuck size: Ø 200 mm -Passage: Ø 55 mm -Weight: 12 kg
Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 250 mm -centrically exciting: -Weight: 35 kg
Quick-change chuck, quick-change holder, quick-change head, quick-change drill holder, quick-change insert -Manufacturer: Roto Record, quick-change chuck mount: MK2 / 26 mm -Type: FW2 TGL 30 21212 -Quantity: 2x quick-change chucks available -Price per piece -Total dimensions: Ø 50 x 143 mm -Weight: 0.6 kg
Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 125 mm -exciting: centric -Replaceable jaws: soft -Weight: 6 kg
Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 125 mm -exciting: centric -Replaceable jaws: soft -Cone mounting: Ø 82 mm -Bolt circle: Ø 105 mm -Weight: 14 kg
Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 250 mm -exciting: centric -Replaceable jaws: soft -Weight: 22 kg
maximum number of results exceeded
please refine your search
