ergomat used for sale

Ergomat TBC 60 - Multi-slide turning center - as good as new exhibition machine - Rod passage: 60 mm - Tool holder: VDI 25 Compact multi-carriage turning center with eight CNC axes, two-channel control and backside machining. Developed for the ready-to-use production of complex turned parts. - Fanuc 31i-TB dual-channel control - 8 CNC-controlled axes - 2 vertical shaped slides and piercing slides - CNC cross slide at the front - Rear CNC cross slide with servo-driven Sauter turret and driven tools - Tapping spindle integrated in the turret - Astonishingly short cycle times - Backside processing - Coolant device - Generously dimensioned working area for unhindered chip fall - Chip collector - Year of construction: 2021 Specifications: Rod passage: - Round material: 60 mm - Hexagonal material: 52 mm - Square material: 42 mm Main drive: - max. spindle speed: ...

- spindle bore: 26 mm - max. spindle speed: 5.000 1/min - turret with 6 stations (not driven) - 2x cross slides - 2x vertical slides - only worked with plastic accessories - barfeeder FMB turbo 3-26 dimensions LxWxH: - machine 1600 x 1220 x 1740 mm - barfeeder 3300 x 700 x 1300 mm weight overall: 1.700 kg

Bar capacity round/hexagonal/square: 42/36/29mm, connected load: 22.5kW, controls: GE Fanuc Series 18i-TB, length: 2200mm, width: 1270mm, height: 1580mm, weight: 2.7t, operating hours control: 28,829h.

8 main spindles, Chucker AFH130 for complete machining means front- and back side, Control Siemens Sinumerik 840DI, complete revising and new configuration of this machine in year 2010, loading arm, for loading and disloading, Workpiece turn around station in pos. 4 , position 4 with workpiece length control, CNC compound slide in pos. 5, coolant pump with magnet candle filter, tooling: could be different like pictures option: Ergomat TB42 fot cutting off for half finnishing with FMB-Turbo

diameter: 26 mm length: 3200 mm Control: total power requirement: 1 kW weight of the machine ca.: 1,4 t dimensions of the machine ca.: 4,5 x 0,8 x 1,35 m Bar feeder FMB Turbo 3-26 1 channel and bar pusher for 26mm Bar length max. 3200 mm Was attached to Gildemeister Ergomat TDA 26 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of spindles:8 spindle passage:130 mm Cam controlled multi spindle automatic lathe, used 8 main spindles Chucker AFH130 for complete machining means front- and back side Control Siemens Sinumerik 840DI complete revising and new configuration of this machine in year 2010. loading arm, for loading and disloading Workpiece turn around station in pos. 4 position 4 with workpiece length control CNC compound slide in pos. 5 coolant pump with magnet candle filter tooling: could be different like pictures option: Ergomat TB42 fot cutting off for half finnishing with FMB-Turbo Irrtum und Zwischenverkauf vorbehalten Visiting under production condition possible Please, contact us for getting more informations and pictures on mail@tar-mc.com or www.tar-mc.com

Grinding length: 1300 mm Grinding width: 550 mm Grinding height: 560 mm Wheel diameter: 400 mm Spindle power: 7 kW CNC Brand: _Unknown / Other MACH-id    5480 MAKE        Blohm TYPE          Planomat 612 - ERGOMATIC EASY TOUCH YOP            2001 SPECIFICATIONS X - Travel        1300 mm Y - Travel         550 mm Z - Travel         560 mm Table Length       1200 mm Table Width          600 mm Table load         800 Kg Feed rate X-Axis         4.000 mm/min. Feed rate Z-Axis           4.000 mm/min. Grinding stone dimensions     400 x 127 x 50 mm Power       ...

grinding length: 1.200 mm grinding width: 600 mm workpiece height: 550 mm control: Ergomatic Blohm Grinding spindle:: max. spindle speed: 1.450 1/min driving power - grinding spindle: 7,5 kW grinding wheel diam. min/max.: 190 / 400 mm grinding wheel wide min./max.: 30 / 80 mm grinding wheel width: (Standard) 50 mm grinding wheel hole diameter: 127 mm movement areas:: x-travel: 1.300 mm y-travel: 550 mm z-travel: 560 mm work table:: distance grinding spindle - table min./max.: 150 / 700 mm table surface area: 1.200 x 600 mm table height over floor: 950 mm table adjustment - longitudinal: 1.300 mm max. table load: 800 kg feeds:: feed speeds: X: 30 - 30.000 mm/min feed speeds: Y: 4 - 3.750 mm/min feed speeds: Z: 4 - 4.000 mm/min total power requirement: - kW weight of the machine ca.: 5,4 t dimensions of the machine ca.: 5,8 x 4,5 x 2,5 m Grinding Wheel Holders: 1 x grinding wheel: 2 x  ...

Key data: 1200 mm, 600 mm

Year of construction 2004 Control Other Blohm ERGOMATIC Grinding length [mm] 1200 Grinding width [mm] 600 General: Year of construction 2004 Control Blohm ERGOMATIC X-axis 1,300 mm Y-axis 550 mm Z-axis 560 mm Clamping surface 1,600 x 600 mm Grinding area 1,200 x 600 mm Equipment / Accessories: Coolant supply for coolant system with filter Set-up shop for electronic handwheels Magnetic clamping blades 1,200 x 500 mm Accessories 2x flange, 3x grinding wheel