136,419 used machines on RESALE, but how to find them? Machine Search
Designed to ISO2858 the ECC (close coupled) Plastic Mechanical Seal Pumps are heavy duty pumps.
Hydraulic press 1500 tons. Clearance between the two side pistons = 1400 mm. Clearance between uprights = 400 mm. Vertical clearance between open boards 3200 mm. Moving table dimensions = 1700 x 1800 mm. Fixed table size = 1500 x 2000 mm. This press has been used to produce forks for forklift.
Specifications: Capacity 63 tons Stroke rate 140 h/min Projection 250 mm Plunger stroke 8-100 mm Table , WxD approx. 700 x 480 mm Installation height approx. 400 mm
Designed to ISO2858 the ECC (close coupled) Plastic Mechanical Seal Pumps are heavy duty pumps.
Waste press Strautmann RC 1100TT after renovation Specifications Maximum pressure: 4 tons Use for: 1100 L Power supply: 230V/1.5 kW Year of construction: 1996 Price: on request If you have any questions, please call us: +48 696 072 985
Specifications: Press force adjustable 10 – 100 kN Projection 210 mm Table size W x D approx. 500 x 400 mm Installation height with/without clamping plate 300 mm Stroke 100 mm
Functional, used chamber filter press with motorized hydraulics and closed filtrate outlet.
800-chamber filter press with motor hydraulics, closed filtrate drain and automatic plate displacement. When the filtrate drain is closed, the filtrate runs through channels within the plate pack to the connections on the fixed stand.
Key data: 80 , 1050 , 450
MODEL ST-80 Power t 80 Motor power kw 3 Working speed mm/s 3.8 Approach speed mm/s -- Return speed mm/s 4.7 Maximum pressure bar 315 Piston stroke – J mm 450 Lower table mm 1,000 x 1,750 Head Displacement – C mm 730 Bridge Displacement – D mm 1,100 Front light – A mm 1.050 Vertical light – B mm 500 Working height – E mm 800 Total front – G mm 2,000 Total side – H mm 1,750 Overall height – I mm 2,250 Weight kg 1,700 STANDARD DESCRIPTION: We have designed ST series motorized hydraulic presses, with movable gantry and adjustable head, available in three powers from 80 to 150 tons. They are specifically designed for the straightening of welded structures and plates cut by oxy-fuel or laser. Its design facilitates the loading and unloading of large parts, plates or structures, optimising working times. Thanks to the lateral displace ...
USED OBEDINENT ECCENTRIC PRESS DESCRIPTION: The frame and slide are constructed of cast steel, with dovetail guides, with a base intended for oil recovery and equipped with mechanical extractor. For the protection of the press and dies. It has two compensating cylinders, pneumatically driven, for balancing the slide and dies. The connecting rod is built in alloy steel and long dimensioned. The clutch-brake is electro-pneumatic actuated, equipped with a double-body safety solenoid valve with cross-flows. Lubrication is carried out by means of a centralised manual pump and the pneumatic installation is equipped with a compensation tank, filter-regulator-lubricator unit with a control pressure switch and safety valve. On the front of the press is the two-handed shot, with an emergency stop button and a stop button in upper neutral. OB-100 TECHNICAL SPECIFICATIO ...
pressure: 40 t distance between columns: 695 bzw. 215 mm stroke: 100 mm table surface area: 650 x 440 mm ram surface: 580 x 285 mm dayligth: 400 mm total power requirement: 15 kW weight of the machine ca.: t dimensions of machine L x W x H: 1,63 x 1,05 x 2,61 m - with die cushion - with light bareer make SICK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 642 t
CNC Press Brake Manufacturer: SMD Yawei Type: PBB-630/6200 Year of construction: 2018 CNC control: CYBELEC ModEva 15 Pressure: 6,300 kN Working width approx. 6,200 mm DSP-Laser-TX Connected load: 400 V / 95 kVA
Korsch EK II single station eccentric tablet press, maximum tablet diameter 50 mm, maximum depth of fill 40 mm, Maximum pressure 120 kN. capacity up to 3600 tablets per hour using a single-tip tooling, machine net weight approx. 600 kg
200 ton x 4000mm with Rolleri Pneumatic clamps
Promess KA-EMF80 Servo Press 80 KN Manufacturer: Promess Type: KA-EMF80 Type: Servo Press KN: 80 Item Condition: New Calibrated: Yes Strain gauge amplifier: BA 624.u2 More servo presses new and used - you can find them in our shop! International shipping costs on request!
Maximum force: 1600 tons Slider stroke length: 400 mm Unattainable-course: 12 mm Number of courses of a slider per minute: 16 Number of single turn-on: 12 The closed height: 870 mm Adjustment: 220 mm Under-forginig plate: -From left to right: 1600 mm -From front to rear: 1600 mm -Thickness: 650 mm Slider overall dimensions: 1600x1600 mm Aperture in a table: 1000x1000 mm window dimensions in cheeks: 1650x1650 mm Course of a rigid pusher in a slider: 100 mm Force of a rigid pusher in a slider ton-force: 80 Main electric motor power: 110 kW Course of pneumatic pillow: 160 mm Force of pushing out of a pneumatic pillow ton-force: 71 Hydropneumatic pillow: -Working course: 250 mm -Force of pushing out ton-force: 25 -Force of a clip ton-force: 250 Press overall dimensions: 4670x4670x8110 mm Press weight: 147 tons
Promess KA-EMF20/150 Servo Press 20 KN Manufacturer: Promess Type: KA-EMF20/150 Type: Servo Press KN: 20 Item Condition: New Calibrated: Yes Strain gauge amplifier: BA 62601 More servo presses new and used - you can find them in our shop! International shipping costs on request!
5 and 10 liter capacity, up to 6 bar Auction-ID: A1-50251-521
Specifications: Capacity 63 tons 2 strokes 105 rpm and 140 rpm large projection 450 mm ! Plunger stroke 8-100 mm Plunger adjustment approx. 70 mm Table , WxD approx. 700 x 780 mm Plunger, W x D approx. 450 x 280 mm
Bale size (W x H) approx. 1,100 x 700 mm Bale weight approx550kg
Hand spindle press, mandrel press, spindle press, hand spindle press, printing press, balance printing press -Spindle press: Hand spindle press -Pressure: max. kg -Stroke: 60 mm -Intermediate dimension: 200 mm -Dimensions: 1020/600/H1520 mm -Weight: 120 kg
Specifications: Capacity 50 tons Stroke rates 115 rpm Projection 250 mm Plunger stroke 8 - 120 mm Plunger adjustment approx. 70 mm Table , WxD approx. 650 x 500 mm Diarrhoea och approx. 250 x 180 mm
Specifications: Capacity 300 to Stroke rate 35 strokes Plunger width 1000 mm Projection 450 mm Plunger stroke 20 - 140 mm Plunger adjustment 80 mm Engine power 30 hp Weight roughly estimated 18 tons
\" General Description Continuous fusing press manufactured by Oshima Co., Ltd. , model OP-1000SP . Industrial textile machine designed for continuous heat-and-pressure bonding of fusible interlining to fabrics in garment and textile production. Technical Details Manufacturer: Oshima Co., Ltd. Model: OP-1000SP Machine type: Continuous fusing press Year: 2024 Serial number: 23 (partially legible) Fusing width: 1,000 mm Maximum temperature: 200°C Maximum pressure: 0.5 MPa Fusing time: 7–34 sec Power supply: 3-phase, 380 V, 50/60 Hz Rated current: 45 A Heater power: 28.8 kW Drive motor: Approx. 0.2 kW Two-stage pressure system Silicone-covered pressure rollers Upper and lower continuous fusing belts Separate heating chambers with temperature control Automatic belt guiding / correction system Cooling system Fabric stripping system Emergency stop and pressure gauge ...
automatic baler Manufacturer: WELGER Type: SB 2000L Machine No.: 1307 51 321 specifications: Pressing force: 7 t Drive power: 11 kW Bale format 500 x 400 x length in mm Machine weight: approx. 1.9 t
Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw
1 Gebr. Hose press Uniflex HM 18.2, built in 1982 Technical data: Manufacturer: Uniflex-Hydraulik GmbH Model: HM 18.2 (robust production hose press with the proven, lubricant-free plain bearing technology for less wear and cleaner work) Application / Suitable for: 2-wire hoses: up to DN 60 4-wire hoses: up to DN 60 6-wire hoses: up to DN 50 Press jaws / tools: Number of press jaws per set: 8 pieces Overall dimensions (W x D x H): approx. 780 x 860 x 1,500 mm Electrical connection: 400 V / 380 V (three-phase current) Motor power: approx. 7.5 kW Typical features Plain bearing technology: Requires no grease, which means that dirt and scale do not stick to the crimping jaws, minimizing wear and extending the service life. Control: A wide range of programs can be selected (fully automatic, semi-automatic, manual control) for precise and repeata ...
HOT PRESS model SIMI 4LP second hand machine plates useful size mm. 2500 x 1300 n.04 pistons diam.mm. 80 max. thrust Ton. 60 specific pressure max. kg.2 / cm2 opening mm. 320 hot water plates heating via wood boiler (optional) weight kgs. 3000
Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw
General Description Industrial high-pressure water pump manufactured by PTC , model MLR 300/200 . Heavy-duty electrically driven pumping unit designed for high-pressure water applications. The unit was used exclusively on one project to operate a Wassara water-powered down-the-hole (DTH) drilling hammer. Technical Details Manufacturer: PTC Model: MLR 300/200 Machine type: High-pressure water pump Year: 2022 Operating hours: 578 h Maximum working pressure: 200 bar Maximum flow rate: 300 l/min Electric motor power: 132 kW Power supply: 400 V, 3-phase, 50 Hz Rated current: 250 A Starting system: Star-delta Starter manufacturer: Formis Davide Electrical cabinet protection: IP66 Application Previously used to supply high-pressure water to a Wassara water-powered DTH hammer. Suitable for demanding industrial, drilling and high-pressure water pumping applications where hig ...
VORONEZH K8544 Hot Forging press YEAR : 1980 / 2008 OVERHAUL AND INSTALLED FORCE : 2500ton RAM STROKE : 350 mm RAM SIZE : 1120X1070 mm TABLE OVERALL SIZE : 1400X1200 mm NUMBER OF STROKES IN CONTINUOUS MODE : 60 NUMBER OF STROKES IN MANUAL MODE : 26 SHUT HEIGHT : 890 mm STROKE OF UPPER KNOCK OUT : 60 mm STOROKE OF LOWER KNOCK OUT : 70 mm MAIN MOTOR : 132KW (CHANGED TO HYUDAI HEAVY Y2012) PRESS OVERALL DIMENSION : 5380X4680X6400 mm HYDRAULIC BOLSTER NEW IN 2007 CONDITION : VERY GOOD WORKING CONDITIONS Trimming press available
Specifications Maximum pressure: 60 tons Press force: 156 t/m² Bale size: 1100 x 1100 x 700 mm Bale weight: 400 kg Power supply: 400V/ 13kW Year of construction: 2014 Dimensions of the tailgate: 2815 x 1085 x 2250 mm Machine weight: 7.5 t The machine is functional
SECOND HAND BENDING PRESS - plates dimensions mm. 3100X800 - opening mm. 800 - 8 cyl. diam. 80 mm.
pressing area: 2500mm x 1100mm; opening: 400mm; heating: elektrisch; plate surface: ALU - Gold eloxiert; Emergency stop switch: yes; pressure: 65t; number of cylinder: 4; electricity: 22A; machine length: 3500 mm; machine width: 1300mm; weight: 3000kg;
Metal press manufactured in 2018. This Dunkes HR75 features a nominal straightening force of 750 kN and a maximum ram stroke of 160 mm. The machine has a usable shaft length of 3000 mm and a throat depth of 250 mm. If you are looking to get high-quality straightening capabilities, consider the Dunkes HR75 machine we have for sale. Contact us for further details.
Gluing Press / Press Rotor / Gluing Stars For the production of solid wood panels or similar Manufacturer: ACMA Levels: 4 Hydraulic Cylinders: 6 per level Hold-down: 2 frames per level Working area per level approx. 2900 x 1150 mm
Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw
maximum number of results exceeded
please refine your search
10 € 
