erc used for sale

: neu : ca. 8 Wochen ab Auftragse : Italien : 12460 € : 239.23 € : 60 mm : 500 mm : 760 mm : 1000 mm : 186 kg : 10 cm³ : 60 x 4 mm : 2 x 3,91 mm : 60 x 4 mm : 60 x 2 mm : 60 x 3 mm : 60 x 6 mm : 64 x 6 mm : 64 x 6 mm : 63 x 4 mm : 50 x 4 mm : 35 mm : 35 x 35 mm : 60 x 20 stehend, 60 x 35 mm : 380 mm : 10 mm : 10 mm : 1,5 / 3 U/min : 1.5 kW quick-change tooling system digital display of bending angle material spring back compensation foot pedal for hands-free operation accurate counterbending die positioning users manual tools not included, priced on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2026 : 090209 : prompt, Zwischenverkauf v : Italien : 7780 € : 150.15 € : 1 : 1 : 42 mm : 400 mm : 570 mm : 1000 mm : 80 kg : 4 cm³ : 42 x 3 mm : 48 x 1,5 mm : 42 x 4 mm : 42 x 2 mm : 42 x 2 mm : 50 x 3 mm : 54 x 2 mm : 54 x 2 mm : 60 x 2 mm : 50 x 4 mm : 30 mm : 40x20 (liegend), 40x12 (s mm : 260 mm : 10 mm : 3,3 U/min : 1.1 kW manual clamping electronic preselection of bending angle digital read our for Clamping position 30 programms with each 9 bends material spring back compensation overload protection mobile by rolls and handle foot pedal tools not included Alternatively also available as following models (prices on request): MB 42M (single phase, 2 U/min) MB 42PM (portable, single phase, 2 U/min) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Refer to code 1168 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

: neu : ca. 12 - 14 Wochen ab Auf : Italien : 32900 € : 628.39 € : 50 mm : 4000 mm : 950 mm : 1250 mm : 430 kg : 6 cm³ : 50 x 3,31 mm : Ø 1”1/4 mm : Ø 50 x 2,5 mm : 40 x 40 x 4 mm : 25 x 50 x 6 mm : 50 x 25 x 2,7 mm : 60 mm : 200 mm : 20 mm : 210 ° : 1,25 / 2,5 : 3.5 kW : 15 l With mandrel 3 m length Can be used with or withoud mandrel Two bending speeds Programmable bend sequencing and mandrel retraction Independent clamp and pressure die adjustment Micrometer wiper die adjustment Auxiliary system for stabilizing the hydraulic slide pressure Quick tool change system With pneumatic material clamping and DRO system for linear and rotational positioning ALTERNATIVELY: model with mandrel 6 m length price on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ERCA Cup Form-Fill-Seal Machine – Oystar ERCA M-FFS-14 High-performance cup form-fill-seal (FFS) machine designed for efficient production and packaging of dairy and food products in plastic cups. The ERCA / Oystar ERCA M-FFS-14 offers reliable operation and high-speed output, making it suitable for industrial food processing lines. General Information - Manufacturer: ERCA - Model: Oystar ERCA M-FFS-14 - Year of Manufacture: 2011 Technical Specifications - Production Capacity: 14,300 cups per hour Cup Formats - The machine is designed for the following cup sizes: - 80 g cups - 125 g cups - 150 g cups Machine Type - Process: Form – Fill – Seal (FFS) - Suitable for automated cup forming, filling, and sealing operations Typical Applications - Ideal for packaging products such as: - Yogurt - Dairy desserts - Cream products - Other liquid or semi-liquid  ...

: neu : ca. 4 Wochen ab Auftragse : Italien : 10900 € : 209.28 € : 60 mm : 595 mm : 363 mm : 900 mm : 130 kg : 10.5 cm³ : 60 x 3 mm : 2Gas x 3,91 mm : 60 x 4 mm : 60 x 2 mm : 60 x 4 mm : 60 x 4 mm : 64 x 4 mm : 64 x 4 mm : 60 x 4 mm : 50 x 4 mm : 35 mm : 60x30x4 stehend, 60x40x5 mm : 300 mm : 10 mm : 10 mm : 1,25 / 2,50 U/min : 1.5 kW digital read out for bending angle manual clamping material spring back compensation digital read out and zero setting for clamping point 2 speeds overload protection mobile by rolls and handle tools not included The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 25059 Specifications: - Bending capacity pipe at 45 kg / mm² to Ø 48 X 3.5 mm - Solid material up to 30 mm - Bending angle 0 - 180 ° - Largest average bending radius Rm 225 mm - Smallest inner bending radius Ri 10 mm - Drive 220 V / 1.7 Kw - Space requirement approx. W 400 x H 950 x D 600 mm - Weight approx. 100 kg - with - bending angle preselection - Digital bend angle display + bend angle fine adjustment - Bending tools , Ø 1/2" R 67 mm, Ø 1" R 67 mm ,

Manufacturer: Mattei Schraubenkompressor, Type: ERC 200 AP 200 H 4, Screw compressor: yes, Final sealing pressure bar 1: 9, Driving power kW 1: 37, Volume flow rate m³/h: ca.5, Compressed air min/max bar: 9, Dimensions mm: 2000 X 1000 X 1400, Available: sofort, Preis zzgl. Mwst: 1750,

: neu : ca. 4 Wochen ab Auftragse : Italien : 3620 € : 38 mm : 245 mm : 300 mm : 320 mm : 23 kg : 19 cm³ : 38 x 1,5 mm : 38 x 1,5 mm : 35 x 3 mm : 30 x 2 mm : 35 x 1,5 mm : 42 x 1,5 mm : 42 x 1,5 mm : 50 x 2 mm : 50 x 2 mm : 50 x 4 mm : 20 mm : 10 x 25 mm : 25 x 20 (stehend), 25 x 1 mm : 180 mm : 36 mm : 10 mm : 2,8 U/min : 0.9 kW digital adjustment of the bending angle from 0 - 180 ° single phase motor 220V / 900W electric engine brake indicator light for indicating overload basement made of cast iron, suitable for mounting a tripod (tripod not included) 90° bend in 6 seconds foot pedal without tools OPTIONAL EQUIPMENT: tripod € 330,- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This ERCOLINA Megabender TOP 030 die bending machine was manufactured in 2011. It features a maximum pipe diameter of 2 (60.3 mm) and a pipe slide length of 3,000 mm. With 30 programs and the capability to work with various materials, consider the opportunity to buy this ERCOLINA Megabender TOP 030 die bending machine. Contact us for further details.

The KEBA keypad HT511-221/ENGEL/50200/19 - 2-stage enabling button - comes from an ENGEL ERC 34-1-E Handling from 2007. The serial number is 50200-01062. The device is ready for connection with a coupling plug.

The KEBA keypad HT501-221/ENGEL/24244/18 - 2-stage enabling button - comes from an ENGEL ERC 24 Handling. The serial number is P21305-02216. The device is ready for connection with coupling plug incl. soft case.

The KEBA keypad HT501-221/ENGEL/24244/18 - 2-stage approval button - comes from an ENGEL ERC 24 Handling. The serial number is P21305-02213. The device is ready for connection with coupling plug incl. soft case.

Auction-ID: A1-40262-70

Auction-ID: A1-40262-69

Youtube function and status video: https://youtu.be/3eyfAb14C7g Battery: 20/2019, 24V 375Ah, very good performance measured at 25.7V very clean device from clean laboratory Auction-ID: A1-45453-448