erc used for sale

: R10-R260 : 210 ° bending speed: 2 U/min : 1 1/4 x 3,5 mm : einphasig - 230 V drive motor: 1,1 kW : < 70 dB weight of the machine ca.: 80 kg dimensions of the machine ca.: 410 x 1000 x 570 mm Accessories / equipment: Hard copper and aluminum: 54x2 mm Steel tube: 42x3 mm Stainless steel: 42x2.5 mm Solid material: 30 mm Number of programs: 30 each 9 bends Control: Soft-touch control panel in 8 different languages Mobile by driving device The controller allows easy programming of the automatic cycle The controller is equipped with a system diagnostics and has a great language selection. Patented fast tool change system A single bending speed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 48x3,5 mm : 48x2,5 mm : 32 mm : 64x2 mm bending speed: 2 U/min : R10-R300 total power requirement: 1,5 kW weight of the machine ca.: 110 kg dimensions of the machine ca.: 410x1000x570 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 63x4,2 mm external diameter: min. Ø 5 mm bending radius min.: 10 mm bending radius max.: 270 mm Bending Angle: max. 210 ° bending device: gegen Uhrzeigersinn total power requirement: 0,75 kW weight of the machine ca.: 130 kg dimensions of the machine ca.: 740x470x1030 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 60x3 mm : 60x2,5 mm : 35 mm : 64x4 mm : R10-R300 bending speed: 2 U/min total power requirement: 1,5 kW weight of the machine ca.: 130 kg dimensions of the machine ca.: 595x363x900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: R10-R260 : max. 210 ° : 54x2 mm : 42x2,5 mm : 42x3,5 mm : 30 mm bending speed: max. 4 U/min Amount of programms: 30x9 voltage: dreiphasig 220-400 V total power requirement: 1,1 kW dimensions of the machine ca.: 1000 x 410 x 570 mm weight of the machine ca.: 80 kg Accessories / equipment: - Machine structure: aluminum alloy - Base: welded steel - Standard accessories (including footswitch, operating instructions) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 560 mm roll length: 1500 mm rolls drilled: Peripher Nip adjustment: hyraulisch 0 total power requirement: 150 kW Condition: used, completely overhauled, with warranty Specification: rolling mill 560 x 1500 mm - used model external gearbox - motor sideways placed at the machine - roll diameter: 560 mm - roll length: 1500 mm - model: Duplocom / pluridrive - Peripherally drilled rollers for water cooling - Cardan joints between gearbox and rollers - Individual drive for the rollers, for variable friction - hydr. gap adjustment - Hydraulic unit - Tilting steel guide plates - rollers mounted on roller bearings with appropriate lubrication - rollers with new ball bearing slewing rings, make Maier, for the connection to the water circuit - One gearbox - two individual drives, each with: 2x 75 kW - 400 V - 50 Hz - two new frequency conv ...

roll diameter: 550 mm roll length: 1500 mm rolls drilled: peripher Nip adjustment: hydraulisch 0 total power requirement: 90 kW Condition: used, overhauled Specification: rolling mill 550 x 1500 mm - used - roll diameter: 550 mm - roll length: 1500 mm - monoblock - motor under the rolls - Fixed friction between the rolls - Rolls: peripherally drilled, for water cooling - Gap adjustments: NEW hydraulic - Hydraulic unit: NEW - tiltable steel material guide jaws - Rollers: mounted on bronze bushes with oil circulation lubrication via pump - new ball bearing slewing rings for connection to water circuit - Safety brake for EMERGENCY STOP - New AC motor 110 kW - 400 V - 50 Hz - New pan for receiving the mixture - Safety bars bi-directional - New electrical control cabinet with PLC system S7-1200 - New frequency converter for 110 kW, f ...

: R10-R260 bending speed: 2,5 U/min : 42x3 mm : 42x2,5 mm : 30 mm : 54x2 mm total power requirement: 1,5 kW weight of the machine ca.: 80 kg dimensions of the machine ca.: 410x1000x570 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Refer to code 1020 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Specifications Ø tubes / radius in mm: Ø 22 / 67 Ø tubes / radius in mm: Ø 10 / 36

Gear motor, electric motor, electric gear motor -Speed: 5 rpm -Power: 0.37 kW -Construction: B3 angle -Diameter hollow shaft: 25 mm -Protection class: IP 55 -Number: 1x motors available -Price: per piece -Dimensions: 570/160/H215 mm -Weight: 18.2 kg

Refer to code 1026 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Chassis, electric motor, DC motor, traction motor, drive motor -Manufacturer: Jungheinrich, chassis drive motor for pallet stacker type: ERC 205 -Motor: Type GF106-G3 24V 2.0 kW -Engine brake: Type IQ BFK458-10E -Wheel: 230 x 082 mm -Dimensions: 300/210/H650 mm -Weight: 64 kg

Chassis, electric motor, DC motor, traction motor, drive motor -Manufacturer: Jungheinrich, chassis drive motor for pedestrian stacker type: ERC 205 -Motor: Type GF106-G3 24V 2.0 kW -Motor brake: Type IQ BFK458-10E -Wheel: Type 1537 -Dimensions: 300/270/H650 mm -Weight: 65kg

Refer to code 1027 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Chassis, electric motor, DC motor, traction motor, drive motor, steering motor -Manufacturer: Jungheinrich, steering motor from pedestrian stacker type ERC 205 -Type: GNM 5460-G18.5-MIR1 Ser. H -Motor: 24V/240W -Dimensions: 140/130/H360 mm -Weight: 7.5 kg

Chassis, electric motor, DC motor, traction motor, drive motor, steering motor -Manufacturer: Jungheinrich, steering motor from pedestrian stacker type ERC 205 -Type: GNM 5460-G18.5-MIR1 Ser. H -Motor: 24V/240W -Dimensions: 135/130/H365 mm -Weight: 7.5 kg

Refer to code 1033 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Tiller head, pedestrian stacker, pedestrian pallet truck -Manufacturer: Jungheinrich, tiller head complete from pedestrian stacker type ERC 205 -Number: 2x tiller head available -Price per piece -Dimensions: 700/500/H180 mm -Weight: 10 kg/pc.

Control, control part, interface -Manufacturer: Jungheinrich, control from pedestrian stacker ERC 205 -Type: MP 1510C/6 -Mat no.: 50313640 -Voltage: 24V -Number: 1x control unit available -Price per piece -Dimensions: 245/190/H140 mm -Weight: 3.9 kg/pc.

Refer to code 1016 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

: 60x3 mm : 60x3 mm : 35 mm : 64x4 mm : max. 210 ° : R10-R300 bending speed: 1,25/2,5 U/min total power requirement: 1,5 kW weight of the machine ca.: 130 kg dimensions of the machine ca.: 595x363x900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Refer to code 1159 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1056 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

A high-temperature rolling machine for glass fiber reinforced compounds is available. 1) Large roller Comerio Ercole, year of construction: 1970, working width: 1500mm, roller diameter: 600mm, roller gap: electrically adjustable, lubrication: circulating oil lubrication. 2) Small roller Meccaniche Moderne, year of construction: 1966, working width: 800mm, roller diameter: 400mm, lubrication: circulating oil lubrication. 3) Horizontal mixer, volume: 2.5m³. 4) Big bag frame with crane. 5) 2x gravimetric dosing scales with control. 6) Conveyor belts and spiral balancing conveyor. 7) Condux HM 45/60 LA hammer mill (lined) with a 1000 mm vibrating screen. 8) 2x Lauda heaters. Including cement mixer, bucket elevator, silo, bagging scales, glass feed rack and a control cabinet for overall plant control. Documentation available. On-site inspection is possible.

tube diameter: 60 mm wall strength: 3 mm bending radius min.: 2 x Rohr-Ø ÷ R200 mm bending angle: 0 - 180 ° gas tube pipelines: 2 (60.,3mm) mm speed: stufenlos 0,5 - 2,0 total power requirement: 1,5 kW weight of the machine ca.: 0,7 t - Powerful mandrel bending machine up to 2 gas pipe (60.3mm) in semi-automatic design (6000 mm pipe slide length) - Electromechanical drive of the bending axis - hydraulic clamping - mandrel feed / extract - 30 programs x 9 bending angle + correction angle The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Chassis, support wheel, swivel wheel -Manufacturer: Jungheinrich, chassis support wheel swivel wheel from pallet stacker type: ERC 205 -Wheel size: 140 x 54 Type GF106-G3 2.0 kW -Dimensions: 240/190/H280 mm -Weight: 16.6 kg

Refer to code 1077 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

roll diameter: 350 mm roll length: 700 mm rolls drilled: Kernbohrung Nip adjustment: hydraulisch 0 total power requirement: 22 kW Condition: used, overhauled Specification: Rolling mill 350 x 700 mm - second-hand model with motor on the side of the rollers - roller diameter: 350 mm - roller length: 700 mm - Rollers: with core bore, with central chamber for water cooling - Fixed friction between the rollers - Rollers mounted on bronze bushes with circulating oil lubrication via pump, - equipped with new slewing rings for connection to the water circuit - Gap adjustment: hydraulic, NEW - Hydraulic unit NEW - Tilting guide plates made of steel - New roller container, made of stainless steel, for holding mixture - bi-directional bars - two safety brakes for NOT stop - AC motor: 22 KW - 400 Volt - 50 Hz - New frequency converter system for va ...

Refer to code 1079 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

tube diameter: 33,7 x 3,4 GAS mm tube diameter: 35,0 x 2,5 STAHL mm tube diameter: 35,0 x 1,5 EDELST mm bending radius min.: R10 - R 190 mm bending angle max.: 0 - 180 ° tool taper: 6-kant 40 mm voltage: 230 V total power requirement: 0,9 kW weight of the machine ca.: 23,0 kg Description: - MediBender 070 digital - with maximum bending performance for 35 x 2.5 mm steel tubes - Excellent bending quality with very tight bending radii . (from 2 x tube diameter) and bending angles between 0° and 180° - Easy to operate - High accuracy and reliability - Fast tool changes (within seconds) - Easy to transport - Huge selection of affordable standard tools (metric, gas inch, inch) BENDING SEGMENT AVAILABLE FOR AN ADDITIONAL CHARGE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : EC0006 : 468 € : 1 for tubing diameter: 2 gas / 60,3 mm R150: Hex50: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : EC0002 : 303 € : 1 for tubing diameter: 1 gas / 33,7 mm R82: Hex40: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Jungheinrich ERC-Z-12 Load capacity 1200kg Year of construction 2002 Battery renewed in 10/2019 Very good condition, has been regularly serviced Only 333 operating hours with Timetronic charger Bipqiakbhfd Lifting height 4300mm Free stroke 1500mm with initalhub Triplex mast Height 1900mm Emergency stop button

tube diameter: 42,0 mm Stahl wall strength: 3,0 mm Stahl tube diameter: 54,0 mm CU/Alu wall strength: 2,0 mm bar material - diameter: 30,0 mm revolutions per minute: 2,0 U/min voltage: 400 Volt total power requirement: 1,1 kW weight: 80,0 kg range L-W-H: 410 x 1000 x 570 mm Demonstration/demo machine () from our exhibition (like NEW) with very few operating hours current new price approx. 8.000 euros special price on request ERCOLINA MediBender MB 42 M - Capacity steel pipe 42 x 3.0mm - Capacity gas pipe 11/4 gas x 3.5 mm - Capacity square profile (FE 42) 35 x 35 x 3 mm - Max. bending radius 10-260 mm - Minimum radius 2 x D - 6-edge tool holder - Min. outside diameter 5 mm - 1/8 gas Equipment: - patented fast tool change system - one bending speed - freely movable foot switch - bending tools on request for an additional charge including ERCOLINA microprocessor control: - with 30 pro ...

Key data: 1200 mm, 141 , 35

Screw diameter: 35 mm Stroke volume: 154 cm³ Injection weight in polystyrene: 141 g/hp Injection pressure: 2,177 bar Clamping force: 120 t tie-barless Tool installation height min.: 300 mm Opening distance: 500 mm CONTROL: CC200 Screen text: german / german Operating instructions: german / german incl. ERC 23/1-F robot, with integrated storage belt Pump drive power: 15kW Total connected load: 24.2 kW Total weight: 7,300 kg Dimensions L x W x H: 4.4 x 1.5 (+0.8) x 2.0 m m m m Payment terms: 100 % before taking over the machine, net only

Refer to code 1071-1072-1073-1074-1075-1076 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Engine Brand: MERCEDES, Conditie: CORE, Nominal Power @ Nominal Rpm: 441 Kw, Engine Injection Type: DIRECTE INJECTIE , Engine Aspiration Type: TURBO INTERCOOLER , Bore: 128 mm, Stroke: 142 mm, Engine Capacity: 21930 cc, Qty Cylinders: 12 Qty, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Blue , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 393 Kw, Rated Speed: 2100 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/mercedes-om-424-901-500-co re/763, , = More information =, , Type: Engine, Empty weight: 1.650 kg, Type number: OM 424.901-500

tube diameter: 60.3 x 4.5 mm ST tube diameter: 60.3 x 5.4 mm ALU tube diameter: 2 x 3.91 mm GAS bar material - diameter: 35.0 mm revolutions per minute: 2.0 U/min bending radius min.: 10.0 mm bending radius max.: 270 mm external diameter: min. 5.0 mm external diameter: min. 1/8 Zoll voltage: 230 V total power requirement: 1.5 kW weight: 76.0 kg range L-W-H: 302 x 243 x 674 mm Equipment: - mandrel-less tube bending machine - Model M = ELECTRO-HYDRAULIC SINGLE-PHASE - high performance and compact design - completely hydraulic machine - bends 210° without the need to catch up - no electronic control - Ercolina patent n. 102017000142179 - control of the bending angle via adjustable angle scale - mobile machine base BENDING SEGMENT AVAILABLE AT AN EXTRA CHARGE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Refer to code 1063-1064-1067 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1152 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

: neu : ca. 4 Wochen ab Auftragse : Italien : 3620 € : 38 mm : 245 mm : 300 mm : 320 mm : 23 kg : 19 cm³ : 38 x 1,5 mm : 38 x 1,5 mm : 35 x 3 mm : 30 x 2 mm : 35 x 1,5 mm : 42 x 1,5 mm : 42 x 1,5 mm : 50 x 2 mm : 50 x 2 mm : 50 x 4 mm : 20 mm : 10 x 25 mm : 25 x 20 (stehend), 25 x 1 mm : 180 mm : 36 mm : 10 mm : 2,8 U/min : 0.9 kW digital adjustment of the bending angle from 0 - 180 ° single phase motor 220V / 900W electric engine brake indicator light for indicating overload basement made of cast iron, suitable for mounting a tripod (tripod not included) 90° bend in 6 seconds foot pedal without tools OPTIONAL EQUIPMENT: tripod € 330,- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Refer to code 1089-1090 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Hydraulic pump, traction motor, drive motor, servo tank, hydraulic tank, servo oil tank -Manufacturer: Jungheinrich, servo tank hydraulic tank from pedestrian stacker type ERC 205 -Add-on parts: see photos -Number: 2x container available -Price per piece -Dimensions: 270/220/H370mm / 270/215/H360mm -Weight: 2.2 kg / 2.9 kg

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump -Manufacturer: Rexroth, hydraulic pump from pedestrian stacker JungheinrichTyp ERC 205 -Gear pump: Type 0541 100 054 -Drive: 24V 3kW -Number: 2x unit available -Price per piece -Dimensions: 140/130/H330mm / 150/130/H330mm -Weight: 14.3 kg / 13.9 kg

Refer to code 1153 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Manufacturer: 2 Lakierroboter Yaskawa, Type: ENCM und ERCS, Year: 2005/2007, Control: Yaskawa, Spraying heads - total: 2, Working width mm: 1500, Conveyour system: Transportwagen gesteuert, gesteuerte Achsen: 6, Ex-geschützt: yes, S-Achse Grad [°]: +/- 170, L-Achse Grad [°]: +/-120-65, U-Achse Grad [°]: +/-205-165, R-Achse Grad [°]: +/-190, B-Achse Grad [°]: +/-145, T-Achse Grad [°]: +/-360, Max.Tragkraft kg: 5, Max Drehmoment Nm: 3/8, Stainless steel design: yes, Spraying stations: 2, Colour circuits: 1, Laquer circles: 1, FREE TEXT: beide Anlagen Roboter sind gekoppelt einem Transportsystem für den Tisch, Year :2005/2007

: neu : ca. 12 - 14 Wochen ab Auf : Italien : 38900 € : 742.99 € : 64 mm : 4000 mm : 950 mm : 1250 mm : 850 kg : 10 cm³ : 64 x 3,3 mm : 2 mm : 60,3 x 2,2 mm : 60 x 60 x 2 mm : 40 x 60 x 4 mm : 60 x 40 x 3 mm : 76 mm : 200 mm : 20 mm : 210 ° : 4.2 kW : 15 l with mandrel 3 m length FST closure system (Patented) with auxiliary system for stabilizing the hydraulic pressure of the slide Programmable C-axis bending Positioning of the 2-axis manual spindle carriage (Y1=Feed and B=Rotation) with high resolution encoder and standard adjustable mechanical stops Multifunction control keyboard integrated in the machine body with microprocessor control with multifunctional menu 30 programs of 9 bends each can be memorized Screen for digital display for carriage feed (Y1 Axis) and rotation (B Axis) External pressure gauges for easy setting of the system and closing pressure Variable bending spee ...

Refer to code 1154 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

: neu : ca. 8 Wochen ab Auftragse : Italien : 39500 € : 754.45 € : 127 mm : 850 mm : 1200 mm : 850 mm : 720 kg : 80 cm³ : 127 x 7,1 mm : 4 x 8,56 mm : 127 x 7,1 mm : 114,3 x 5,6 mm : 114,3 x 5,6 mm : 139,7 x 8,8 mm : 139,7 x 8,8 mm : 64 x 6 mm : 88,9 x 3,65 mm : 50 x 4 mm : 90 mm : 130 x 25 stehend, 130 x 6 mm : 700 mm : 36 mm : 10 mm : 0 - 0,75 U/min : 3.5 kW digital read out for bending angle 4 hexagonal tool holders (40, 50 80 and 110 mm) Possibility to bend left and right Users manaul Tools on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.