er used for sale

Semi-automatic bun-rounding press chops and rounds; divides dough into 30 pieces; power 380 V / 50 Hz/ 3; set includes 3 press plates

Table dimensions: 1300x650 mm Working height: 350 mm 0: . mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 150 t throat: 350 mm stroke: 20-120 mm no. of strokes: 50 / 75 Hub/min ram - range of adjustment: 85 mm table surface area: 1150x670 mm ram surface: 800x380 mm hole in the table: 330x200 mm table height: 800 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 8 t dimensions of the machine ca.: BxTxH 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Clamping force: 800kN, tie-bar spacing: 400mm, injection unit: 430, max. flow rate: 76l/min, max. hydraulic pressure: 210bar, control: CDIAS, weight: 3.6t, an on-site inspection is possible.

Clamping force: 1250kN, tie-bar spacing: 475x450mm, injection unit: 440, max. flow rate: 100l/min, max. hydraulic pressure: 190bar, weight: 6.6t, an on-site inspection is possible.

pressure: 110 t throat: 295 mm stroke: 20-120 mm no. of strokes: 60/90 Hub/min ram - range of adjustment: 85 mm table surface area: 920x580 mm ram surface: 540x280 mm hole in the table: 300x180 mm table height: 830 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,1 t dimensions of the machine ca.: BxTxH 1500x2000x2500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Engine Brand: CATERPILLAR, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Working Hours: 123 Hour(s), Engine Condition: Used , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: No , Starter Voltage: 24 Volt , Rated Power: 202 Kw, Rated Speed: 1800 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 252 , Generator Hz: 60 , Generator Volts: 480 , Generator Amps: 315 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/used-caterpillar-g3406-generat or-202-kva-gas/22424, , = More information =, , Empty weight: 7.500 kg, Type number: CATERPILLAR G3406 GENERATOR 202

Wide belt sanding machine for wood, veneer and varnish Ernst LBK 1300 Grinding width: 1300mm Transverse grinding unit Longitudinal grinding unit

Chip shredder for material from the gunmetal or brass sector. Manufacturer: Erdwich Zerkleinerungsmaschine GmbH Condition: Little used; good to very good. - Range of application: Shredding of gunmetal or brass chips - Throughput capacity: 150 kg/h - Process sequence: The containers with the chips are fed into the hopper of the shredding machine by means of a forklift truck. The dumping height is approx. 2,950 mm. The shavings are crushed by the crushing plant and discharged into the on-site container. Occasional impurities are discharged via the impurity flap and and discharged into a separate container. Operating Instructions: 1 x in paper form; 1 x as CD-ROM in German or English. Temperatures: The system/machine as well as its switchgear combination (control) are designed for operation from 0 to 35 degrees room temperature at 60 % humidity. Deviating operating conditions r ...

For sale is a Krones Ergomatic labeller in mint condition. The system can be used for large, small and small glass, as well as bottles. Top condition. Is given away inexpensively.

Refer to code 1159 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Erika Record Gr. 7 20 pcs dough dividing and knitting machine Year:2017 - Manufacturer: Erika Record Karl Schmidt GmbH - Semi-automatic roll press - To share and make an impact - Weight range: 70gram to 160gram - Type: 7 20 pcs - 20 pieces - 400 Volt 0.75kW 50Hz - Year of construction 2017

bore capacity in steel (diameter): 70 mm throat: 420 mm bore stroke: 260 mm thread capacity: 50 M spindle taper MT: 5 MK column diameter: 220 mm bore spindle turning speed range: 51-966 U/min table-size: 600x600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Refer to code 1071-1072-1073-1074-1075-1076 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

bore capacity in steel (diameter): 35 mm throat: 300 mm bore stroke: 150 mm thread capacity: 27 M spindle taper MT: 4 MK column diameter: 125 mm bore spindle turning speed range: 100-2000 U/min table-size: 480x480 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used concrete block, pavers production plant Brand: ERMAK Country of Origin: Türkiye Model: 8 X 8 QUATRO Year: 2021 Scope of Supply • Main press (single-layer machine, servo-driven) • Pallet dimensions: 1,400 x 1,150 x 50 mm • Cycle time: 15 seconds • Finger car • Buffer rack • Elevator – de-stacker unit (dry and wet towers) • Dry-side pallet conveyor • Stone centering robot • Product collection robot • Omega product discharge conveyor • ZENO horizontal and vertical PET strapping machines • Integrated shot-blasting machine and feeder (servo-driven) • Transverse conveyor • Pallet storage system (conveyor and robot) • Machine infeed conveyor Additional Equipment • ColorMix • Double washing machine Excluded from the Scope of Supply • Pallets (production boards) • Curing chamber racks • Moulds • Batching plant (mixers ...

Refer to code 1063-1064-1067 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

bore capacity in steel (diameter): 35 mm throat: 300 mm bore stroke: 150 mm thread capacity: 27 M spindle taper MT: 4 MK column diameter: 125 mm bore spindle turning speed range: 132-1852 U/min table-size: 420x400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mm throat: 300 mm bore stroke: 160 mm thread capacity: 30 M spindle taper MT: 4 MK column diameter: 125 mm bore spindle turning speed range: 75-2100 U/min table-size: 480x480 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Refer to code 1152 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1089-1090 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Manufacturer: Ernst , Type: AB 1 1300, Year: 1982, Control: no, Compressed air cleaning: yes, Number of units: 2, Units mounted upright: yes, Roll transport: yes, Feeding speed continous adjustable: gekoppelt an Schleifmaschine, rotor jets: Kanal, FREE TEXT: Arbeitsbreite 1400/Arbeitshöhe 80/inkl.Turbine, Year :1982

screw size:45 mm injection shot weight in Polysterol:149 g/PS closing pressure:100 kN

Pressure:175 t chamfer lenght:4100 mm distance between columns:3600 mm column arm:410 mm ram stroke speed:180 mm/sec return speed:135 mm/sec working speed:10 mm/sec work stroke:275 mm oil volume:200 l dayligth:550 mm table height:900 mm table width:90 mm total power requirement:15 kW weight of the machine ca.:12000 kg dimensions of the machine ca.:5100 x 2150 x 2850 mm

Refer to code 1153 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Manufacturer: Ernst, Type: 830 J-2, Monting of the machine: quer / längs / längs, Sanding width mm: 1380, Sanding hight mm: 3 - 120, Number of sanding belts: 3, Sanding belt dimensions: 5.400 x 150 + 3.150 x 1.400, Transverse sanding units: 1, Längsschleifaggregate: 2, Band 1 Leistung kW : 15, Band 2 Leistung kW : 30, Band 3 Leistung kW : 37, Continous adjustable feeding speed m/min: 12 - 36, Intermediate sanding of lacquer: no, Constant table hight: ca 880, Vacuum table: 7,5, Brushing unit: 1,1, Weight in kg: 7.400,

Refer to code 1154 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

bore capacity in steel (diameter): 50 mm throat: 350 mm bore stroke: 180 mm thread capacity: 35 M spindle taper MT: 4 MK column diameter: 150 mm bore spindle turning speed range: 132-1852 U/min table-size: 480x480 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 35 mm throat: 300 mm bore stroke: 150 mm thread capacity: 27 M spindle taper MT: 4 MK column diameter: 125 mm bore spindle turning speed range: 100-2000 U/min table-size: 420x400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Refer to code 1168 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

bore capacity in steel (diameter): 40 mm throat: 300 mm bore stroke: 160 mm thread capacity: 30 M spindle taper MT: 4 MK column diameter: 125 mm bore spindle turning speed range: 75-2100 U/min table-size: 480x480 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ERCA Cup Form-Fill-Seal Machine – Oystar ERCA M-FFS-14 High-performance cup form-fill-seal (FFS) machine designed for efficient production and packaging of dairy and food products in plastic cups. The ERCA / Oystar ERCA M-FFS-14 offers reliable operation and high-speed output, making it suitable for industrial food processing lines. General Information - Manufacturer: ERCA - Model: Oystar ERCA M-FFS-14 - Year of Manufacture: 2011 Technical Specifications - Production Capacity: 14,300 cups per hour Cup Formats - The machine is designed for the following cup sizes: - 80 g cups - 125 g cups - 150 g cups Machine Type - Process: Form – Fill – Seal (FFS) - Suitable for automated cup forming, filling, and sealing operations Typical Applications - Ideal for packaging products such as: - Yogurt - Dairy desserts - Cream products - Other liquid or semi-liquid  ...

DEMAG ERGOTECH VIVA 800-400 injection moulding machine was built in 2001 in Germany by Demag Kunstofftechnik (currently Sumitomo (SHI) Demag Plastics Machinery GmbH). This highly efficient machine is used for the economic production of plastic parts of different colours, shapes and sizes. These parts are produced using the reliable injection moulding method, which involves feeding plasticised plastic into a mould and then clamping it with high press force. The machine’s high-performance components, including a precision mould clamping system operating at a maximum force of 80 tonnes, ensure high repeatability of the manufactured products. The DEMAG injection moulding machine weighs 3750 kg. Technical specifications of the DEMAG ERGOTECH VIVA 800-400 injection moulding machine - maximum mould clamping force: 80 t (800 kN) - screw diameter: 35 mm - maximum injection weight PS: 157  ...

Offer 25059 Specifications: - Bending capacity pipe at 45 kg / mm² to Ø 48 X 3.5 mm - Solid material up to 30 mm - Bending angle 0 - 180 ° - Largest average bending radius Rm 225 mm - Smallest inner bending radius Ri 10 mm - Drive 220 V / 1.7 Kw - Space requirement approx. W 400 x H 950 x D 600 mm - Weight approx. 100 kg - with - bending angle preselection - Digital bend angle display + bend angle fine adjustment - Bending tools , Ø 1/2" R 67 mm, Ø 1" R 67 mm ,

A renovated extrusion recycling brand EREMA INTAREMA 1310 TVEplus for processing polyethylene (PE) and polypropylene (PP), polystyrene (PS), with laser filter and screen changer, degassing for processing printed films. Output up to 850 kg/h, electrics 240/400 volts, 50 hertz, immediately available. Financing possible without personal liability. Auch + Technik e. Kfm. D-73728 Esslingen Official agent for EREMA GmbH A-Ansfelden Phone +0049 1577 5329827

A renovated extrusion recycling brand EREMA INTAREMA 1310 TVEplus for processing polyethylene (PE) and polypropylene (PP), polystyrene (PS), with laser filter and screen changer, degassing for processing printed films. Output up to 850 kg/h, electrics 240/400 volts, 50 hertz, immediately available. Financing possible without personal liability. Auch + Technik e. Kfm. D-73728 Esslingen Official agent for EREMA GmbH A-Ansfelden Phone +0049 1577 5329827

New shrink foil packaging machine Brand: Erregi Type: EASY 250 This plant consists of the wrapping machine and the shrink tunnel. The wrapping machine is formed of a suitably reinforced steel chassis, an infeed and an outfeed conveyor belt. In machine chassis there are the following components: - The driven upper roller - The system for unrolling the lower roller, consisting of a driven roller and a pneumatic assisted idle roller. - The system for welding and cutting the upper and lower PE sheets consisting of a special alu profile, with temperature controll and changable steel blade for carry out the cold cut. - The infeed and outfeed transport belt is likewise made up of reinforced steel chassis on which a closed link belt is mounted. The shrink tunnel consists of two chassises. - One holding the heated part and one supporting the former. - This system wi ...

Lock cylinders, carriage cylinders, WDS cylinders, holding arms for punching tools, screw S 30/24D, and much more

Key data: 700 mm, 250 mm, 350 mm

Universal Milling Machine ERNAULT SOMUA HES ZHV1 Travel X : 700 mm Travel Y : 250 mm Travel Z : 350 mm Rotation : from 40 to 2000 RPM Table size : Length 1200 mm x Width 300 mm Vertical/horizontal universal swivel head Scale 3 axes EAE Rapid 3 axes Voltage380 V Width: 2000 mm Depth: 1800 mm Total height in height: 1600 mm Weight: approx 1,5 T

A high-temperature rolling machine for glass fiber reinforced compounds is available. 1) Large roller Comerio Ercole, year of construction: 1970, working width: 1500mm, roller diameter: 600mm, roller gap: electrically adjustable, lubrication: circulating oil lubrication. 2) Small roller Meccaniche Moderne, year of construction: 1966, working width: 800mm, roller diameter: 400mm, lubrication: circulating oil lubrication. 3) Horizontal mixer, volume: 2.5m³. 4) Big bag frame with crane. 5) 2x gravimetric dosing scales with control. 6) Conveyor belts and spiral balancing conveyor. 7) Condux HM 45/60 LA hammer mill (lined) with a 1000 mm vibrating screen. 8) 2x Lauda heaters. Including cement mixer, bucket elevator, silo, bagging scales, glass feed rack and a control cabinet for overall plant control. Documentation available. On-site inspection is possible.

Widebelt Sander line with 3 machines Working width: 1300 Composed of: Boere Elite - 1 x calibration unit with contact roller - sandinmg unit from below Ernst LKB - Cross Sanding Unit - Longitudinal Sanding Unit OTT RSO - Calibration Roller - Sanding pad

working width: 1380 mm workpiece height: 70 mm : total power requirement: 45 kW weight of the machine ca.: 5.500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Erka dough machine Model: HK 30 for approx: max. 30 kg dough 2 courses Machine mobile with locking foot Connection 400V, 16A-CEE plug Machine You can find many more bakery machines with us.

tube diameter: 28 mm wall strength: 2 mm bending radius min.: 90 ° Control: 3D TubeSoft Slim total power requirement: 3,5 kW weight of the machine ca.: - kg dimensions of the machine ca.: - mm Description: Round tube steel (S235): 60.0 x 6.0 mm Round tube stainless steel (S 355): 60.0 x 4.0 mm Square tube steel: 50 x 50 x 4.0 mm Rectangular tube steel: 60 x 40 x 2.0 mm max. usable length: 3048 mm Bending speed: 10°/sec including tools (see photos) Mandrel is no longer available, can be retrofitted The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

numbers of pallets: 10 0: 40 kg Overall size: 120 x 120 x 150 mm weight of the machine ca.: 620 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 350 mm roll length: 700 mm rolls drilled: Kernbohrung Nip adjustment: hydraulisch 0 total power requirement: 22 kW Condition: used, overhauled Specification: Rolling mill 350 x 700 mm - second-hand model with motor on the side of the rollers - roller diameter: 350 mm - roller length: 700 mm - Rollers: with core bore, with central chamber for water cooling - Fixed friction between the rollers - Rollers mounted on bronze bushes with circulating oil lubrication via pump, - equipped with new slewing rings for connection to the water circuit - Gap adjustment: hydraulic, NEW - Hydraulic unit NEW - Tilting guide plates made of steel - New roller container, made of stainless steel, for holding mixture - bi-directional bars - two safety brakes for NOT stop - AC motor: 22 KW - 400 Volt - 50 Hz - New frequency converter system for va ...

Two similar Stanley riveting punches are available. Both machines include rivet dispensers ERF 23 and 23.1. An on-site inspection is possible.