76538 offers

maximum number of results exceeded > 1000
please refine your search

Category: 200: wood working machines
New in: 2010
Price: request quote
Location: Land-ba BA 74270 Teslic, Svetog Save 4a
Seller: Unipak

For sale complete plant for wood pellet production, made from CPM, capacity 6t/h. A most of the maschines from line are produced in between 2008-2010.y., except presses for making pellets (its bit older then rest of the line, but completly renewed before restarting. Line is consisting from: 1.Chain conveyer for logs transport. 2.Lift with angle platform for dosing material. 3.Entrance belt transporter with magnetic section for detection of iron. 4.Grinder (hammer mill) BRUKS 500kW 5.Verticaly basket transporter for chip wood. 6.Horisontal belt transporter for chip wood with three side ejectors into depoos (separated with type of the wood) 7.Hidraulic floor platform for dosing wood  ...

Category: 103: milling machines
New in: 1990
Price: request quote
Location: Abgeber
Seller: Sperling Werkzeugmaschinen

x-travel: 560 mm y-travel: 500 mm z-travel: 450 mm control: Grundig Contour 3 tool taper: SK 40 turning speeds: 40- 4000 U/min feed: 2- 3600 m/min rapid traverse: 4.000 m/min Weight: 3400 kg workpiece tool changer: 30-fach dimensions of the machine ca.: 4358 x 4200 mm Coolant System: The machine is in a very well-maintained condition, fully functional and ready to use. The machine is energized by the issuer and can be used at any time be visited.

Category: 102: lathes
New in: 1990
Price: request quote
Location: Land-de DE
Seller: Czech Industrie Service

Tip height: 265 / 360 mm Top width: 3050 mm Spindle bore: 81 mm Speed range: 33-2000 RPM Total power: 7,5 KW / 400 V Machine weight: 4100 kg Equipment / Accessories: 3 jaw Chuck Multifix quick change Toolpost removable bed bridge All technical data are created according to our best knowledge and existing documents; Expressly reserved by mistake. Anyone can test the machine before making a purchase in our factory under power.

Category: 110: accessories for machine tools
New in: used
Price: request quote
Location: Tönisvorst
Seller: SK Maschinen-Service GmbH

t-slottted clamping plate 2500 x 1500 x 250 mm, like new.

Category: 842: paper converting: die cutters
New in: 1994
Price: request quote
Location: Land-de DE 50933 Köln, Eupener Str. 135-137
Seller: PP Lion Trade e.K.

Bobst SP 103-ER, 1994 Ref.Nr: 2587 manufacturer Bobst model SP 103-ER year built: 1994 speed: 7500 sh/h Max sheet size: 103 x 72 cm availability: immediately condition: good price: on technical request spezification: â?¢ centerline â?¢ NON-stop feeder & delivery â?¢ Double sheet control â?¢ ONE stripping frame, one universal lower blanking frame, 2 cutting frame â?¢ max speed of 7500 sheets/hour â?¢ Total hours functions 35865

Category: 102: lathes
New in: 2001
Price: request quote
Location: Deutschland
Seller: Gromag AG

turning diameter: 300 mm swing diameter: 400 mm turning height: 350 mm control: Siemens Sinumerik 840 D spindle diameter in front bearing: 100 mm feed range: 0,1 - 20000 mm/min spindle head DIN 55026 - Size: A 6 : 50 - 6500 1/min rapid traverse Z-axis: 20 m/min total power requirement: 40 kW weight of the machine ca.: 8 t dimensions of the machine ca.: 4,5 x 4,0 x 3,5 m equipped with: - CNC Control Siemens 840 D - Tool turret for 12 tools VDI 40 - conveyor belt - oolant tank

Category: 101: boring mills and machining centers
New in: 2008
Price: request quote
Location: Land-fr FR 67500 HAGUENAU, 20 RUE AMPERE
Seller: SOCIETE FIMOTEC

Machine type machining center - vertical make DOOSAN DAEWOO type NM 410 HS year 2008 control type CNC storage France origin KORREA delivery immediately cargo base factory technical details longitudinal 762 mm 410 mm, transverse vertical 510 mm tool changer 30 POS. maximum tool length 300 mm tool diameter 80 mm max Werkzeugdurch. free neighboring box. 130 mm rapid traverse 48 m/min weight approx. 5 t power 100% ED 11 kW 40% ED 18 kW speed range 20000 1 RPM tool holder SK 40 top 920 X 430 mm admissible load (table Center) 600 kg keyway width 18 mm number of grooves 4 PCs Additional information FANUC21 I el MB series. Handwheel, Chip conveyor 20000 RPM RPM MAGAZINE 30 SPECIALIZE ...

Category: 102: lathes
New in: 2005
Price: request quote
Location: Deutschland
Seller: Gromag AG

turning diameter: 250 mm swing diameter: 350 mm turning height: 250 mm control: Siemens 840 D travel -x axis: 745 mm travel -z axis: 200 mm weight: 6 t Turret: 12fach VDI40 with automatic loading and unloading station

Category: 709: other food machines
New in: 2005
Price: request quote
Location: Land-uk UK Wolvey
Seller: Machinery World Ltd

The PMG machine by Trepko has been designed for forming and wrapping of a great number of different food products. Different infeed systems allow for filling a wide range of products including edible fats (butter, butter with vegetable oils, margarine), fresh cheese (tvorog), minced meat, lard, yeast and similar products. This is a Used PMG4 twin head machine, manufactured in 2005 and is currently working with butter bricks of 200 gram. The output capacity is between 100 - 200 bricks per minute. Please scroll down for a video of this machine installed and running in the previous factory. Features Manufacturer: Trepko Model: PMG4 Function: Butter forming / packing ...

Category: 102: lathes
New in: 2010
Price: request quote
Location: Deutschland
Seller: Gromag AG

turning diameter: 260 mm x-travel: 626 mm z-travel: 250 mm control: Siemens Sinumerik 840D turning speeds: 5500 U/min rapid traverse X-axis: 60 m/min rapid traverse Z-axis: 30 m/min tool turret with 12 work positions: angetrieben VDI 40 chip convoyer

Category: 101: boring mills and machining centers
New in: 1997
Price: 26.500 €
Location: Land-de DE 58515 Lüdenscheid, Stüttingshauser Ringstr. 39
Seller: WTS Maschinenhandels KG

Control: HEIDENHEIN TNC 426 Spindle cooling IKZ with reprocessing on band filter Table dimensions: 1450 x 610 mm travel: X: 1270 mm Y: 600 mm Z: 760 mm spindle speed: 0-6000 RPM. High speed spindle 30,000 rpm for three-dimensional milling,. Spindle Collet Cone: SK50 tool changer positions: 2 x 16 motor power: 38 kW machine dimensions: L 3250 with a chip conveyor 4400 mm T 2300 mm, 3200 mm machine weight: 8000 kg Coolant system Electronic Handwheel Chip conveyor Machine runtime 23145 h On-time 46620 h

Category: 106: presses
New in: 2000
Price: request quote
Location: Land-CH Switzerland, 9527 Niederhelfenschwil
Seller: ProdEq Trading GmbH

pressure: 12 t no of strokes: Hub/min sheet width: mm --------------------------------------------------: PRESS DESIGN: - drive system: eccentric / crank: PRESS FORCES: - total force (nominal): 12 to PRESS TABLE: - table surface (left-right): 490 mm - table surface (front-back): 400 mm - thickness of bolster plate: 50 mm - opening in bed (left-right): 250 mm - opening in bed (front-back): 90 mm - number of T-slots: 3 SLIDE: - slide force: 12 to - table surface (left-right): 294 mm - table surface (front-back): 168 mm - spigot hole diameter: 32 mm SLIDE (MECHAN. PRESS): - slide adjustment: 30 mm - automatic stroke adjustment: yes: - stroke min.: 8 mm - ...

Category: 107: sheet metal working
New in: 2001
Price: request quote
Location: Land-at AT 4661 Roitham, Kemating 16
Seller: ZIEGLER - Maschinen & Werkzeuge

Motor plate shear Cutting length: 2040 mm Sheet thickness: 3 mm Motor: 4 kW Voltage: 400 V Dimensions W Ã? H Ã? t: approx. 2600 x 1400 x 850 mm Weight: 1750 kg

Category: 101: boring mills and machining centers
New in: used
Price: request quote
Location: Land-de Germany, 47877 Willich - Neersen
Seller: Markus Hirsch GmbH

x-travel: 762 mm y-travel: 560 mm z-travel: 1020 mm control: Ultimax III taper ISO: 40 Table dimensions: 1300 x 700 mm work piece spindle speed: 30 - 4000 U/min voltage: 380 V total power requirement: 7,5 - 5,5 kW weight of the machine ca.: t dimensions of the machine ca.: m

Category: 709: other food machines
New in: 2004
Price: request quote
Location: Land-uk UK Wolvey
Seller: Machinery World Ltd

This is a Used Tetra Pak Hoyer Frigus 1200 C self-contained continuous freezer ready to operate after connection to power, compressed air, water and mix supply. This is the standard model with twin piston pump on the inlet, rotary pump on the outlet and simple controls. It is a desirable machine for anyone looking to upgrade or increase capacity. Features Manufacturer: Tetra Pak Model: Hoyer Frigus SF 1200 C Function: Continuous ice cream freezer Serial number: 1240401 Capacity: 400-1200 litres/per hour Year of manufacture: 2004 Refrigerant: R404A (5,3 kg) Total installed power: 32 kW Horizontal freezing cylinder Twin piston pump for accurate mix and air intake (Inlet) ...

Category: 101: boring mills and machining centers
New in: 2017
Price: request quote
Location: Süddeutschland
Seller: 5X Machines GmbH

x-travel: 750 mm y-travel: 600 mm z-travel: 500 mm Control: Heidenhain TNC620 weight of the machine ca.: 8 t dimensions of the machine ca.: 4,5x3,2x2,9 m

Category: 401: filling machines
New in: 1995
Price: 80.000 €
Location: Land-de DE 70192 Stuttgart, Spitzwegstr. 8
Seller: CBV - Chistoph Binder Verpackungsmaschinen

Used fully automatic tube filling and cartoning line for capacities up to 200 PE - or laminate tubes including accessories and numerous format sets

Category: 102: lathes
New in: 1971
Price: request quote
Location: ab Werksstandort,unter Strom
Seller: Kemmerich Werkzeugmaschinen GmbH

faceplate diameter: 1400 mm swing diameter: 1450 mm turning height: 1630 mm max. workpiece weight: 6300 kg reus: max. 250 U/min cross rail adjustment - vertical: 1250 mm max. ram stroke: 1100 mm Control: Siemens 840 D total power requirement: - kW weight of the machine ca.: - t - general reconditioned and modernized in 2001 - CNC - control SIEMENS SINUMERIK 840 D - chip conveyor - paperband Filter Knoll - machine wasnt in use in production

Category: 709: other food machines
New in: 1998
Price: request quote
Location: Land-uk UK Wolvey
Seller: Machinery World Ltd

This is a Used 7,500 LPH APV Gaulin Type 55-3 P Homogeniser which is a poppet valve machine & has a max. working pressure of 3000 psi (200 bar). Features •Manufacturer: APV •Model: Gaulin 55-3 P •Serial Number: 98L35278 •Function: Homogeniser •Capacity: 7.500 litres/per hour •Year of manufacture: 1998 •Max. working pressure: 200 bar (3000 PSI) •Valve design: Poppet •Number of stages: 2-Stage •Total installed power: 55 kW •Electrics: 380V / 3Phase / 50Hz •Finish: Stainless steel covers •Includes control panel •Instruction manual included Dimensions •Depth: 175 cms •Width: 140 cms •Height: 170 cms •Weight: 2550 kgs ...

Category: 109: other metal working machines
New in: used
Price: 1.022 htt
Location: http://mhpdocs.logotech.de/1022/1022-H07206-09122014152824947.jpg
Seller: Knops Werkzeugmaschinen

1

Category: 403: labeling machines
New in: used
Price: 1.800 €
Location: Land-de DE 70192 Stuttgart, Spitzwegstr. 8
Seller: CBV - Chistoph Binder Verpackungsmaschinen

tube labeler

Category: 102: lathes
New in: 1982
Price: request quote
Location: Metzingen
Seller: Hans-Jürgen Geiger Maschinen-Vertrieb GmbH

turning diameter over bed: 430 mm turning diameter over slide rest: 260 mm turning length: 1000 mm total power requirement: 8 kW weight of the machine ca.: 2.500 kg dimensions of the machine ca.: m

Category: 709: other food machines
New in: 1996
Price: request quote
Location: Land-uk UK Wolvey
Seller: Machinery World Ltd

Features Manufacturer: Laska Model: KU 200 Function: Stainless steel bowl cutter Serial number: H5919 Bowl capacity: 200 litres Year of manufacture: 1996 Knife shaft speed: 0-4800 RPM Stainless steel construction Total installed power: 97 kW Electrics: 380 V / 50 Hz / 3 Phase Dimensions Length: 275 cms Width: 265 cms Height: 137 cms Weight: 2900 kgs Country of Manufacture Austria

Category: 104: grinding machines
New in: 2000
Price: request quote
Location: Metzingen
Seller: Hans-Jürgen Geiger Maschinen-Vertrieb GmbH

grinding length: 1.000 mm grinding width: 750 mm workpiece height: 700 mm total power requirement: 25 kW weight of the machine ca.: 12 t dimensions of the machine ca.: 4,5 x 3,0 x 2,0 m

Category: 401: filling machines
New in: 1963
Price: 900 €
Location: Land-de DE 70192 Stuttgart, Spitzwegstr. 8
Seller: CBV - Chistoph Binder Verpackungsmaschinen

Can filler

Category: 102: lathes
New in: 1964
Price: request quote
Location: Metzingen
Seller: Hans-Jürgen Geiger Maschinen-Vertrieb GmbH

turning diameter over bed: 680 mm turning diameter over slide rest: 480 mm turning length: 6000 mm total power requirement: 18 kW weight of the machine ca.: 6000 kg dimensions of the machine ca.: m

Category: 804: presses: sheetfed 4-color
New in: 1998
Price: request quote
Location: Land-de DE 68789 St.Leon-Rot/Heidelberg, Porschestr. 12
Seller: BOZAL Graphische Maschinen GmbH

- CPC 1-04 - CP Tronic - Preset feeder - Alcolor dampening units - Technotrans cooling - HEIDELBERG Autoplate - Perfecting 2/2 or 4/0 - standard wash-up devices - Grafix Alphatronic 200 powder spray - Low pile delivery - Plusversion - 91 mio. impr.

Category: 107: sheet metal working
New in: used
Price: request quote
Location: D-74889 Sinsheim
Seller: Frech GmbH

material width: 0350 mm material thickness: 8,00 mm no. of straightening rolls: 19 diam. of the rolls ca.: 24 mm thickness min. approx.: 0,14 mm straight. speed ca.: 10-18 m/ min between stands ca.: 355 mm barrel length ca.: 355 mm drive ca.: 4,20 kW weight of machine ca.: 1,2 to dimensions of the machine ca.: 1,60 x 1,30 x 1,40 m Comment: - vertical roll spacing = 8.50 mm - Central oil lubrication of the cardan shafts and straightening roller bearings - Straightening roller bearing BRONZE - Support roller bearings NADELLAGER (needle roller bearings) - inlet table - outlet conveyor belt 2018 the straightening machine was reviewed and cleaned in our factory. The electrical system is checked a ...

Category: 708: refrigeration engineering
New in: 2003
Price: request quote
Location: Land-de DE 75446 Wiernsheim
Seller: GIMA TRADE

Kühlkomperssoren Kopeland 12 PCs available

Category: 210: window production machines
New in: used
Price: 15.000 €
Location: ab Standort
Seller: Gebr. Engelfried oHG

Tenoning spindle: 1 St. Number of milling agregates: 7 St. Spindle diameter: 50/40 mm Control: CNC The plant can be visited in use Window system Okoma / Hemag for high capacity with Oppold tools IV 78 Pos. 1: OKOMA Type UF 2 S with long slotted spindle, stepless adjustment ------------------------------------------------ Cross-cut saw from above -3 kW motor, 380 volts, 50 Hz -electronic horizontal adjustment 150 mm electronic length stop, controlled, length: 3000 mm 1 slit spindle 600 mm with stepless positioning Diameter: 50 mm Power: 18.5 kW Spindle speed: 4000 rpm Tool diameter max .: 400 mm 2 profile spindles Diameter: 50 mm Length: 270 mm Motor: 11 kW, 380 Volt, 50 Hz Spindle speed: 7 ...

Category: 401: filling machines
New in: used
Price: 900 €
Location: Land-de DE 70192 Stuttgart, Spitzwegstr. 8
Seller: CBV - Chistoph Binder Verpackungsmaschinen

Used 2-head filler

Category: 107: sheet metal working
New in: 1992
Price: request quote
Location: Günzburg
Seller: Bästlein Gebrauchtmaschinenhandel GmbH

sheet width: 1040 mm plate thickness: 2,5 mm rear stop: 0-550 mm table height: 750 mm column arm: 100 mm total power requirement: 3 kW weight of the machine ca.: 750 kg

Category: 1200: machines and plants for process engineering
New in: 1959
Price: request quote
Location: Land-it IT 5101 Bergheim, Mitterwaldweg 23
Seller: HTS GmbH

Complete grinding system with task organs, mill, filter and conveyor systems Control cabinets new electric motor new transmission all wear parts All documentation

Category: 103: milling machines
New in: 2005
Price: request quote
Location: Standort
Seller: Bästlein Gebrauchtmaschinenhandel GmbH

x-travel: 500 mm y-travel: 450 mm z-travel: 400 mm Table dimensions: 700x500 mm turning speeds: 20-8000 U/min feed: 0-10000 mm/min. rapid traverse: 12 m/min spindle taper: SK 40 control: Heidenhain iTNC 530

Category: 107: sheet metal working
New in: 1992
Price: request quote
Location: Land-de DE
Seller: Reinhard Klein Maschinenhandel

-Bend tube dimensions 70 x 2 mm (material strength 400 n/mm2) -Bending sequence automatically -Maximum bending angle 180 degrees + on suspension - bending radius Max 250 mm / min. 40 mm pipe inner edge -right and left turn - bending speed max. 9.5 K rpm, adjustable -Length of pipe decking approx. 4,300 mm -Fence -8 bending angle programmable, on decadent Aster, autom. Forwarding -autom. Mandrel -Counter -Repelling device for bending of frame-closed -autom. Central lubrication system -Electro-hydraulic drive 11,5 kW -incl. bending tool (26, 9 x 2, 6 mm RM 65 mm / 33, 7 x 2, 9 mm RM 70 mm / 42, 4 x 2, 9 mm RM 75 mm / 48, 3 x 2, 9 mm RM 80 mm / 60, 3 x 2, 9 mm RM 130 mm - various ar ...

Category: 105: saws
New in: used
Price: request quote
Location: Ahaus
Seller: A+B Werkzeug Maschinen Handels GmbH

Saw blade diameter: 425 mm cutting width: 130 x 130 mm speed: 13 / 26 m/min Motor output: 2,6 kW Dimensions (L/W/H): 1,0 x 0,95 x 1,8 m machine weight ab.: 850 kg

Category: 805: presses: sheetfed 5-color
New in: 1999
Price: request quote
Location: Land-de DE 68789 St.Leon-Rot/Heidelberg, Porschestr. 12
Seller: BOZAL Graphische Maschinen GmbH

- CPC 1-04 - CP Tronic - Preset feeder - Alcolor dampening units - Technotrans cooling, air cooled - ink temperature control - HEIDELBERG Autoplate - standard wash-up devices - Perfecting 2/3 or 5/0 - Grafix Exatronic Plus powder spray - 129 mio. impr.

Category: 205: boring mills, machining centers
New in: 1975
Price: request quote
Location: Ahaus
Seller: A+B Werkzeug Maschinen Handels GmbH

bore capacity in steel (diameter): 32,0 mm Boring depth max.: 150 mm throat: 300 mm engine output: 1,6 kW turning speeds: 207 - 1.450 U/min spindle taper: 3 MK table diameter: 590 x 480 mm weight: 650 kg

Category: 107: sheet metal working
New in: 1972
Price: request quote
Location: Land-de DE 17034 Neubrandenburg, Warlinerstraße 6
Seller: Maschinenhandel Neubrandenburg

Manufacturer: Gebrüder Steiner KG mechanical engineering Type: Jung HTS 3000/12 Year of construction: 1972 Overhaul of the electrics: 1991 Three-phase: 380 V Cutting capacity: 12 mm Cutting length: 3000 mm Weight: approx. 12 t -Machine is tested -new foot switch -complete wiring diagrams for circuit after overhaul of the electrics 1991 available,. -2018 manual and schematics requested and checked

Category: 104: grinding machines
New in: used
Price: request quote
Location: Ahaus
Seller: A+B Werkzeug Maschinen Handels GmbH

drill diameter: 50 mm lip angle: 90-140 ° grinding range: 3 - 50 mm wheel dimensions: 175x22x20 mm total power requirement: 0,36 kW weight of the machine ca.: 120 kg. dimensions of the machine ca.: 810 x 570 x 1260 mm

Category: 107: sheet metal working
New in: 2008
Price: request quote
Location: Land-de DE 74632 Neuenstein, Robert-Bosch-Str. 22
Seller: mteg GmbH

Year of construction: 2008 Hours of operation machine: 65.250 h (01.10.2018) Hours of operation a laser: 64.733 h (01.10.2018) Hours of operation a beam: 17.390 h (01.10.2018) Laser power: 4000 Watts Work area: 3000 x 1500 x 115 mm Control: Siemens Sinumerik 840 d Bzwckjvc Max steel approximately: 20 mm Max stainless steel approx.: 15 mm Max aluminium approx.: 8 mm Space requirement approx.: 11,650 x 9,000 x 3.566 mm Approximate weight machine: 11,500 kg Power consumption: 88 kVA Standard equipment -Closed machine frame with integrated laser unit -Automatic pallet changer -Longitudinal conveyor for small parts/waste -Lighting of workroom -Position laser diode -Programmab ...

Category: 1900: general inventory
New in: used
Price: used machinery auction RESALE 77 €
Location: Land-it IT Italy, 25011 Zona Industriale di Calcinato
Seller: Surplex GmbH

Weight approx.: 5 kg Dimensions (l x w x h) approx.: 250 x 250 x 100 mm Description: With keys set 14-27 mm, see photos

Category: 107: sheet metal working
New in: used
Price: 795 €
Location: Land-de DE 59846 Sundern, Bruchhausen 21
Seller: Czech Industrie Service

Schneidlstg.: 1100 x 1.0 mm Drive: manual v. HD. Machine weight: 300 kg Equipment / Accessories: RIP fence Sheet holders Adjustable length stop All technical data are created according to our best knowledge and existing documents; Expressly reserved by mistake. Each party has the opportunity to test the machine before making a purchase in our factory.

Category: 202: milling machines
New in: used
Price: used machinery auction RESALE 45 €
Location: Land-de DE Germany, 47055 Duisburg
Seller: Surplex GmbH

Weight approx.: 5 kg Dimensions (l x w x h) approx.: 400 x 350 x 350 mm Description: 900 W, 8000 to 24000 rpm, incl. side stop and accessories

Category: 708: refrigeration engineering
New in: 1991
Price: used machinery auction RESALE 6.500 €
Location: Land-de DE Wilsdruffer Str. 10 01723 Grumbach
Seller: Industrial Auctions BV

Start Frost Helix spiral freezer, number: 41.255, year of construction: 1991, s/s mesh belt, belt width: 400 mm, 22 floors. All information and more pictures, see the Web site. You can copy and paste the following link to see the machine: https://www.industrial-auctions.com/auctions/377-online-auction-spiral -freezers-in-Grumbach-de/spiral-froster/spiral-froster/2-Helix-startfr ost/

Category: 1900: general inventory
New in: used
Price: used machinery auction RESALE 70 €
Location: Land-de DE Germany, 47055 Duisburg
Seller: Surplex GmbH

Weight approx.: 12 kg Dimensions (l x w x h) approx.: 500 x 400 x 300 mm Description: LAMELLO TANGA Power Tool

Category: 107: sheet metal working
New in: 1985
Price: request quote
Location: Land-De Germany, 50937 Köln
Seller: Gewerbe Dmitri Perfilov

Max. width of plate: 3150 mm Max. plate thickness: 40 mm Min. inside bending radius, mm: 460 Max. side roll stroke, mm: 460 Bending speed, m/min: 6,5 Side roll raising speed, mm/min: 150 Total power of electric motors, kw: 60 Overall dimensions: 8484 X 4830 X 3875 mm; Machine weight: 65 000 kg. New approx. 1985

Category: 1900: general inventory
New in: used
Price: used machinery auction RESALE 45 €
Location: Land-de DE Germany, 47055 Duisburg
Seller: Surplex GmbH

Weight approx.: 22 kg Dimensions (l x w x h) approx.: 600 x 500 x 400 mm Description: 5 pieces

Category: 1401: shelves
New in: 2004
Price: 14 €
Location: Land-de DE Köln / Frechen
Seller: LHS Vertriebsgesellschaft mbH

Due to location resolution we sell a pallet shelf system / reverse slider system of manufacturer's SSI Schäfer. Total 12,000 pallet places available. Possible subsets Height 11 metres of the plant at the time. Frame depth 1050 mm, profile 100 mm wide. Conditioning can be trimmed. Trussing 3600x140x50mm with professional 2800 kg = 700 kg per pallet. Field load up to 22 tonnes possible. Driving car load 322 tons. Disassembling is running at the time. Availability from immediately possible. Subsets and possible sale Price per pallete according to point way from â?¬14 NET as a standard shelf. Additional charge as Verschieberegal + â?¬60 NET

Category: 202: milling machines
New in: used
Price: used machinery auction RESALE 40 €
Location: Land-de DE Germany, 47055 Duisburg
Seller: Surplex GmbH

Weight approx.: 3 kg Dimensions (l x w x h) approx.: 500 x 200 x 150 mm Description: Power 850 W, with accessories

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)