We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,781 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
With upstream feed conveyor belt Working width 1000 mm Drive 11 kW
used
This ERMAKSAN RPP 12730 Punching machine was manufactured in the year 2009 in Turkey. It has 2 axis. The machine has a punching force of 300 kN.
used
Refer to code 1071 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.
used
Refer to code 1072 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.
used
Refer to code 1073 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.
used
Refer to code 1074 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.
used
Refer to code 1075 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.
used
Erem steel switch cabinet with 14 Control Techniques Commander SK frequency converters and 12 Danfoss VLT AutomationDrive frequency converters, dimensions: 1600 mm x 600 mm x 2000 mm.
used
Refer to code 1076 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.
used
Profile bending machine Ercolina Model TOP 030 - Three-phase 6 meters. With complete sets of rollers diam.20/25/30/35/35/35/43/50,8mm and 15/20/22mm hangers.
used
Refer to code 1077 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.
used
Refer to code 1079 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.
used
Refer to code 1089 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.
used
Refer to code 1090 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.
new
Pressure:175 t chamfer lenght:4100 mm distance between columns:3600 mm column arm:410 mm ram stroke speed:180 mm/sec return speed:135 mm/sec working speed:10 mm/sec work stroke:275 mm oil volume:200 l dayligth:550 mm table height:900 mm table width:90 mm total power requirement:15 kW weight of the machine ca.:12000 kg dimensions of the machine ca.:5100 x 2150 x 2850 mm
used
Sheet metal deburring machine Manufacturer: ERNST Type: EM5/N900 Year of construction: 1999 Control type: conventional Working width: 880 mm Workpiece height: 1-70 mm Grinding drum diameter: 420 mm Machine weight approx.: 2,800 kg Dimensions approx.: 2,500 x 1,715 x1,675 mm automatic sheet metal deburring machine working in wet grinding process automatic magnetic filter system Wet sanding device Washing and drying facilities Maglev width: 200 mm Minimum length of small parts: 80 mm
used
used
Equipped with 4 spindle drill head
used
Cutting bench cutting scissors sheet metal shears Type: Hydraulic Manufacturer: ERMAK Type: CNC-HVR 4100x10 Year: 2008 Control: DELEM DAC-360 Cutting width: 4100mm Cutting thickness: 10mm Unloading: 350mm Back gauge depth: 1100mm Motor power: 22kW Including support arms: 3000mm Including protractor; for cutting in corners. Including pneumatic holding system Total size: 5420x2270x2460mm Machine weight: 17000kg Video available
used
used
Bar capacity round/hexagonal/square: 42/36/29mm, connected load: 22.5kW, controls: GE Fanuc Series 18i-TB, length: 2200mm, width: 1270mm, height: 1580mm, weight: 2.7t, operating hours control: 28,829h.
used
Ram stroke: 80mm, ram adjustment: 100mm, max. working width: 4750mm, machine needs overhauling.
used
For melting and curing powder-coated parts, as well as drying and baking painted parts, max. charge weight: 500kg, operating temperature: 100-320°C, calorific value: 10kWh/m³, heating capacity: 90kW, internal dimensions: 2500x1200x1850mm, volume: 5.55m³, connected load: 8.075kW, length: 3800mm, width: 2700mm, height: 3100mm, with instruction manual, without spare parts or accessories.
used
Compressed air supply: 5bar, connected load: 45kW, operational hours counter: 21,712h.
used
An electric drying oven. Operating temperature: 50°C-250°C, usable space: 2.6m³, heating connection values: 18kW, motors: 0.74kW. On-site inspection is possible.
used
Capacity: 160 t Sheet length: 1200 mm Sheet width: 400 mm Width between standards: 400 mm Capacity Kg: 160000 Distance between column:850mm Table Length: 1200mm Table Width: 400mm Table Height: 400mm Ram stroke: 500mm Power: 11kW Length: 4200mm Width: 1500mm Height: 1500mm Weight: 6250kg
used
Clamping force: 420t, screw diameter: 70/ 15mm, injection volume: 1212/ 292cm³, length: 7900mm, width: 2200mm, height: 5000mm, weight: 25t, with robot.
used
Clamping force 250t, clear tie bar width: 560mm, operating pressure: 190bar, weight: 10.7t, with documentation, an inspection is possible.
used
There are two Injection Moulding Machines Demag Ergotech System 250/630-1450 available, clamping force 250t, clear tie bar width: 630mm, operating pressure: 190bar, weight: 13.1t, year of construction machine 1/ 2: 2001/ 2006, with documentation, an inspection is possible.
used
Clamping force 350t, clear tie bar width: 710mm, operating pressure: 190bar, weight: 16t, with documentation, an inspection is possible.
used
Screw diameter: 35mm, operating hours: 73,500h, on-site inspection is possible.
used
Output: 50-300kg/h, operational hours counter: 10h, with edge trim extraction.
used
Current: 3A, connected load: 298VA.
used
There are two shredders available, blade width: 3x 46mm, power: 30kW, machine 2 has a cracked casing and needs overhauling.
used
Connected load: 41kW, an inspection is possible.
used
Working width: 250mm, transport angle: 4-7°, transport speed: 0.3-2.5m/min, solder volume: 120kg, preheating length: 800mm, connected load: 8kW, length: 1980mm, width: 770mm, height: 1430mm, weight: 250kg, filled with lead-free solder, with documentation, on-site inspection is possible.
used
pressure: 400 t throat: 400 mm stroke: 40 - 140 mm number of strokes - idle run: 32 min-1 ram adjustment: 125 mm table surface area: 1250 x 750 mm dayligth: min/max 450/590 mm total power requirement: 31,5 kW weight of the machine ca.: 23 t Overall size: 3,7 x 1,7 x 3,9 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Capacity, ton 1250 Stroke, mm 500 Min number of no-load stroke: 8 /per min Slider adjustment, mm 215 Max. shut height between bolster plate and slider (stroke down, adjustment up), mm 1100 Table size, mm 1600 x 1850 Slider size, mm 1300 x 1400 Table gap size, mm 1100 x 1100 Distance between columns, mm 1630 Distance between slides, mm 1580 Cushion travel, mm 200 Cushion capacity, ton 200 main motor power, kW 90 Press weight, kg 110000
CCM turret bearing / Slewing bearing Drawing: 190.40.4140.000.41.1502 Dimensions / Dimensions: 4405 / 3886 x 222 mm
used
Complete bottling line for 6 liters PET bottles 3.000 bph Composed by: 1. PET blowing machine manufacturer STM (Poland) type Blue line 3 Manufacturing year: 2015 Capacity: 3.000 BPH with 3 cavities mould for 6 litres with water chiller and full HP compressor unit. 2. Air conveyor system exit PET blower conveying the PET bottles to the filling tribloc 3. Rinsing filling capping Tribloc STM ARROW PET 16/16/6 NC/BIG for filling still mineral water in 5 liters PET bottles manufacturing year 2015. 4. Labelling machine UNO ADE adhesive labels on reels manufacturing year 2016 5. Automatic handle setting machine Ersey Makina manufacturing year 2015 6. Full bottles conveying system 7. Automatic Palletizer Ersey Makina manufacturing year 2015 8. Automatic stretch wrapper Ersey Makina manufacturing year 2015 Exceptional opportunity. Line available immediately.
new
pressure: 175 t chamfer lenght: 3100 mm distance between columns: 2600 mm dayligth: 550 mm throat: 410 mm stroke: 275 mm working feed: 10 mm/sec return speed: 135 mm/sec work height max.: 900 mm quantity of oil: 200 l total power requirement: 15 kW weight of the machine ca.: 9450 kg - DELEM CNC control model DA-58T graphics / touchscreen 2D graphic programming 15 high definition color TFT screen Bending sequence calculation Product programming and display in real size USB interface - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Upper deer foot tool with PS 135.85-R08, system A with quick-change clamp - Additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm holder - BOSCH / ...
used
dimensions: 3500 x 3000 mm max load: 50 ton longitudinal travel: 2700 mm rated torque of turning motor: 22 mkg circular feed: 0,0006 gt; 0,6 rpm rated torque of longitudinal travel: 9,4 mkg 13 T-slots (width 36 mmnbsp; H7) power: 50 kVa weight: 31 ton
new
pressure: 220 t chamfer lenght: 4100 mm distance between columns: 3600 mm dayligth: 550 mm throat: 410 mm stroke: 275 mm working feed: 10,0 mm/sec return speed: 185 mm/sec quantity of oil: 300 l Control: DELEM DA 66T total power requirement: 18,5 kW weight of the machine ca.: 13900 kg dimensions: 5150 x 2250 x 3000 mm HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke increased projection -------------------------------------------------- ------- Furnishing: - DELEM CNC control model DA 66T - swiveling touch screen control unit - 7 controlled axes : Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split deer foot upper tool Roleri 135.85.R08, System A - with additional crowning of the upper wedge - Universal die block ...
used
Industrial gas spring, gas spring Eriks GS-19-250-CC-100N stroke 250 mm extended 564 mm extension force 100 N
used
Industrial gas spring, gas spring Eriks RX-GF-19-200-CC-200 stroke 200 mm extended 464 mm extension force 200 N
used
pressure: 100 t chamfer lenght: 2600 mm distance between columns: 2200 mm column arm: 410 mm ram stroke speed: 200 mm/sec return speed: 155 mm/sec work speed: 9,5 mm/sec work stroke: 275 mm dayligth: 530 mm table height: 900 mm table width: 90,0 mm oil volume: 150 ltr. voltage: 400 Volt total power requirement: 7,5 kW weight: 6.850 kg range L-W-H: 3.750x1.950x2.800 mm Current new price ~ 60.000 euros Special price on request from a maintenance workshop - good condition () -------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA-56 (ER 70) 2D graphical programming 10.4 TFT color screen with high resolution Bending sequence calculation USB interface - Swiveling cont ...
used
: 60x3 mm : 60x2,5 mm : 35 mm : 64x4 mm : R10-R300 bending speed: 2 U/min total power requirement: 1,5 kW weight of the machine ca.: 130 kg dimensions of the machine ca.: 595x363x900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Fully automatic machine, Fabr. Erika, Rekord Automat 2
used
Raisin washing machine, Fabr. Ernens, Type Junior
A brand-new extrusion recycling product UMAC (EREMA Group) series READYMAC Type 1109 TVE for processing polyethylene (PE), polypropylene (PP), polystyrene (PS), polycarbonate (PC), and polyamide 6 (PA6), with screen changer type SW RF, for processing printed films. Fully equipped. Capacity up to 450 kg/h, electrics 240/400 volts, 50 heart, immediately available. Auch + Technik e. Kfm. D-73728 Esslingen Phone +0049 1577 5329827