er used for sale

Lathe H.Ernault 250HN This lathe is brand H. ERNAULT Batignolles type 250HN, it has been used very little, the interpoint is 2m.

Capacity: 40 t Folding length: 1000 mm CNC Brand: Delem Max. bending length:        1000mm Distance between column:    800mm Max. pressing force:        40T Beam stroke:                100mm Table Width:                90mm Troth beam:                 250mm Approch speed:              110mm/min. Working speed:              11mm/min. Return speed:               105mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis:  4 Power:                      4,8kW Length:                  ...

The machine is in good technical condition. Forming force: 80t Max. sheet length: 2600mm Weight: 5500kg Dimensions LxWxH: 2900 x 2150 x 2700mm Upon prior agreement, the possibility of a tour in progress.

Capacity: 1270 x 35 tons Elgo NC control for X and Y axis 1 set of tools

Roll dough part and knitting machine Type: Record Power: approx. 2000 pcs / hour Fully automatic machine Size 3 30-piece 30-90 grams with 3 knitting plates For dividing and cylindrical grinding of rolls. Condition: mechanically repaired

Capacity: 3100 x 8 mm (steel) Cybelec NC backgauge Rear entry protection

Capacity 4100 x 175 tons Stroke 700mm ESA S640 CNC DSP laser on the front Y1, Y2, X, R, Z1 and Z2 CNC controlled Double touch fingers Walk-in protection at the rear Wila New Standard clamping Includes 1 set of tools

Pretzel plant (to Manuel Schlingen) Plant consisting of: - High conveyor belt for dough pieces (can be crosswise from a roll head machine be fed. - Winder Erka with long-acting board for pretzel - Sling table Mass: High conveyor belt (L=2100 mm, W=700 mm, height=1680 mm) Transfer width head machine: 700 mm Mass winder with long-acting device (L=2450 mm, W= 1150 mm, H= 1500 mm) Dimensions of loop table (L0 3850 mm, W= 1150 mm, H= 920 mm ) Belt width: 500 mm Table: Frequency controlled All devices in good condition, technically tested

Key data: 160

Extruder for pellet manufacturing Brand: Erema, model: RM160 TF-VSV, year: 2001, 160 mm Ø, double degasser, motor: 200 kw, agglomerator with motor: 132 kw, hydraulic filter changer, wire head, bathtub, vacuum pump and Noodle Previero with vibrating screen. Complete dehumidification installation.

Laser: IPG 1kW Snowboard: 3000 x 1500mm Including exclusion Auto focus Auto calibration Nozzle cleaning Precitec Procutter kick Including new Metalix software with AutoNest

Machine weight: 28800 kg Max. cutting length: 6100 mm Max. metal sheet thickness: 10 mm Unloading in racks: 350 mm Maximum number of strokes per minute: 8-13 min

Grinding spindle for turning steel quick-change systems for machine tools, especially for small lathes, etc. Delivery handling according to picture no. 3.

Capacity 4100 x 175 tons Stroke 700mm ESA S640 CNC DSP laser on the front Y1, Y2, X, R, Z1 and Z2 CNC controlled Double touch fingers Walk-in security at the rear More photos to follow soon

Used Ermaksan press brake Type CNCAP EVO 3100 135 CNC Bombering Y1, Y2, X, R, Z1 and Z2 CNC controlled Hydraulic Wila NS top clamp Sealing mold at the bottom

Capacity, ton 1250 Stroke, mm 500 Maximum drawing depth,mm 200 Min number of no-load stroke: 14 /per min Slider adjustment, mm 315 Max. shut height between bolster plate and slider (stroke down, adjustment up), mm 1250 Table size, mm 1600 x 1800 Slider size, mm 1530 x 1800 Aperture in a table, mm 1100 x 1100 Distance between columns, mm 1600 Cushion travel, mm 200 Cushion capacity, ton 200 Maximum push force ton 31.5 main motor power, kW 125 Press overall dimensions: 5850x3100x8950 mm Press weight, kg 195000

Ermak CNC HAP 4650 CNC Press Brake 500 Ton Cybelec Control Unit Motorized Crowning Hydraulic upper tool holder

Ermak HGS 3100x6 CNC Guillotine Shear Cybelec Contron Unit Machine is in excellent condition

Ermak HGS 4100X6 CNC Guillotine Shear Machine is in excellent condition Cutting length : 4100 mm

Ermak Power-Bend Pro 4100x175 CNC Press Brake 175 Ton Machine is in excellent condition

Ermak CNC HAP 6100 x 600 CNC Press Brake Control Unit : Cybelec

pressure: 135 t chamfer lenght: 3100 mm distance between columns: 2600 mm dayligth: 550 mm throat: 410 mm stroke: 275 mm working feed: 10,0 mm/sec return speed: 120,0 mm/sec work height max.: 900 mm quantity of oil: 200 l Control: DELEM DA 58 T total power requirement: 11 kW weight of the machine ca.: 8650 kg dimensions: 4250 x 2050 x 2800 mm -------------------------------------------------- --------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds -------------------------------------------------- --------- Furnishing: - DELEM CNC control model DA-66T graphic/touch screen 2D graphical programming 17 TFT color screen with high resolution Bending sequence calculation Product programming and real size display USB interface intuitive, graphical entry of profiles Automatic calculation of features:  ...

Ermak FIBERMAK Momentum GEN-3 6 Kw Fiber Laser Cutting Machine Lantek and UPS are included Machine is in very good condition

A well-preserved extrusion recycling product EREMA series RGA 80 TE for processing polyethylene (PE), polypropylene (PP), . Power up to 250 kg/h, electrics 240/400 volts, 50 hearts, short-term available. Auch + Technik e. Kfm. D-73728 Esslingen Phone +0049 1577 5329827

: neu : ca. 12 - 14 Wochen ab Auf : Italien : 64000 € : 1299.2 € : 4535 mm : 1145 mm : 1400 mm : 1488 kg : 18 cm³ : 76 x 3,6 mm : 76 x 2,3 mm : 70x70x3 mm : 70x50x3 mm : 70x50x6 mm : 76 mm : 200 mm : 10 mm : 195 ° : 1,5/3 (50/100Hz) : 3 kW : 50 l Three-phase NC electric-hydraulic mandrel bending machine up to 76 mm with 1 controlled axis (bending axis C) New TCPlus control • 7” colour touch screen • Icons for ease use • Automatic mode, manual mode, programming mode • Advanced OFFSET function • Easy language change • Auto-tuning of the main machine components • Programmable bending speed for each single bend of the program • Unlimited programs possibility (USB port) • Every program can contain up to 30 different bends • Available extensions of 2 meters each (optional) • Tie bar (optional - art. TB80-TI) The data for this ad was created with ModulMWS - the so ...

: neu : ca. 12 - 14 Wochen ab Auf : Italien : 35300 € : 723.65 € : 4000 mm : 950 mm : 1250 mm : 850 kg : 10 cm³ : 64 x 3,3 mm : 2 mm : 60,3 x 2,2 mm : 60 x 60 x 2 mm : 40 x 60 x 4 mm : 60 x 40 x 3 mm : 76 mm : 200 mm : 20 mm : 210 ° : 4,2 kW : 15 l with mandrel 3 m length FST closure system (Patented) with auxiliary system for stabilizing the hydraulic pressure of the slide Programmable C-axis bending Positioning of the 2-axis manual spindle carriage (Y1=Feed and B=Rotation) with high resolution encoder and standard adjustable mechanical stops Multifunction control keyboard integrated in the machine body with microprocessor control with multifunctional menu 30 programs of 9 bends each can be memorized Screen for digital display for carriage feed (Y1 Axis) and rotation (B Axis) External pressure gauges for easy setting of the system and closing pressure Variable bending speed up to  ...

: neu : ca. 12 - 14 Wochen ab Auf : Italien : 29300 € : 600.65 € : 4000 mm : 950 mm : 1250 mm : 430 kg : 6 cm³ : 50 x 3,31 mm : Ø 1”1/4 mm : Ø 50 x 2,5 mm : 40 x 40 x 4 mm : 25 x 50 x 6 mm : 50 x 25 x 2,7 mm : 60 mm : 200 mm : 20 mm : 210 ° : 1,25 / 2,5 : 3,5 kW : 15 l With mandrel 3 m length Can be used with or withoud mandrel Two bending speeds Programmable bend sequencing and mandrel retraction Independent clamp and pressure die adjustment Micrometer wiper die adjustment Auxiliary system for stabilizing the hydraulic slide pressure Quick tool change system With pneumatic material clamping and DRO system for linear and rotational positioning ALTERNATIVELY: model with mandrel 6 m length price on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ERSA HOTFLOW - 7 Tunnel Dryer / Belt Dryer / Continuous Dryer Type: HOTFLOW – 7 Convection oven as a tunnel dryer / belt dryer / continuous dryer for drying plate materials on the top and bottom. 4 heating zones at the top, 4 heating zones at the bottom, for drying on both sides. Rolling rods at a distance of approx. 4.5 cm on 2 transport chains as a support for plates Temperature range from 20° to 300°C Nominal power Pn = 72 KW Nominal current In = 106 A Voltage: 3 x 400 / 230V Back-up fuse: 3 x 125 A Frequency 50 Hz Power 67 KW Year of construction 2000 Dimensions: Length: 5250 mm Width: 1300 mm Height: 1750 mm (incl. warning light) Height: 1450 mm (Without warning light) Dry section: Length of heating zones: 3300 mm Transport width: 500 mm For possible use as a soldering oven – soldering machine – reflow oven, a cooling zone must be set up.  ...

Ermak CNCHVR 6100 x 16 CNC Guillotine Shear Cutting length : 6100 mm Cutting : 6-10 cut per minute Machine is in good working condition

Water tanks & extinguishing water tanks USED & RECONDITIONED Muensterlandtanks.de Extinguishing water tank Extinguishing water tank Storage tank Cistern AHL ASL Diesel tank Heating oil tank Water tank Service water extinguishing tank Buffer buffer tank Extinguishing water tank Water tank A used steel tank in the size of 40,000 litres is offered. Volume: 40.000 Ltr. Material: Steel tank tank, material S235JRG2 Tank shape: cylindrical, horizontal, double-walled Diameter 2.50 m, length approx. 8.50 m Exits: Dom on the top Departures top Tank according to DIN 6608 or 6616 Condition: Tank cleaned from the inside and provided with a new bitumen coating from the outside. Suitable for above-ground and underground storage of water, process water, rainwater, feed etc. Location Ascheberg. Transport can be arranged cost-effectively. The loading of the container on trucks or  ...

: R10-R260 bending speed: 2,5 U/min : 42x3 mm : 42x2,5 mm : 30 mm : 54x2 mm total power requirement: 1,5 kW weight of the machine ca.: 80 kg dimensions of the machine ca.: 410x1000x570 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Folding length : 3100 mm 135 Ton Machine is in good working condition

3100 x 6 mm CNC Cybelec with pneum. Sheet metal holding approx. 8000 kg

weight: 56000 kg engine output: 75.00 kW longitudinal stroke: der Senke 800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This ERLO TH-40 (2017) Drilling machine was manufactured in the year 2017 in Spain and has 4080 production hours. It is equipped with a Mitsubishi M700V/M70v Series contoller (Spindle speed: 750 - 4000rpm).

Refer to code 1020 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

This ERMAKSAN AP 2100-35 Bending machine was manufactured in the year 2005 in Turkey. The machine has a pressing force of 350 kN.

This ERMAK CNCHAP 3600x200 Bending machine was manufactured in the year 2005 in Turkiye. It is equipped with a CYBELEC DNC 60 control unit. The machine has a pressing force of 2000 kN and a bending length of 3600 mm.

This Ermaksan AP 3100-120 Bending machine was made in 2002 in Turkey. The machine has a pressing force of 1200 kN.

Refer to code 1026 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1027 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

An unrenovated very little used ready-to-use extrusion-recycling product EREMA type RGA 1716 TE-VSV for processing shredded washed PET flakes. The quality of the rPET for direct contact with food according to the standards of the F.D.A. (USA) and EFSA (EU) can be achieved with an additional machine with SSP technology. Year of construction 2001, Extruder screw Ø 160 mm (L/D about 34), drive 200 kW, EREMA screen changer type SW8/170RTF, high vacuum system, granulation of Previero, Siemens control with touch screen, Capacity 600 – 1,000 kg/h; usual power was 800 kg/h, Auch + Technik e. Kfm. D-73728 Esslingen Phone +0049 1577 5329827 V

Refer to code 1033 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1060 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1034 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1016 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1056 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1063 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1064 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

: gebraucht : 2021 : 3974 : prompt, Zwischenverkauf v : Spanien : 5100 € : 1 : 1 : 32 mm : MK 3 : 250 mm : 65 - 125 - 185 - 365 - 54 U/min : 1,8/2,6 kW : M24 : 600 mm : 640 mm : 2020 mm : 260 kg : 100 mm : 85 - 635 mm : 1.170 mm : 300 x 270 mm : 600 x 380 mm : 120 mm demo machine ERLO (MADE IN SPAIN) FOR DEMANDING WORKSHOP USE geardrive machine manual feed left-right drilling table with t-slots depth adustable end tool ejector drill guard CE norms user manual in GERMAN (sample photo) OPTIONS: lighting equipment € 231,-- coolant equipment and machine base with T-slots € 825,-- reverse for tapping € 737,-- DELIVERY TIME WITH OPTIONS APPROX. 6 WEEKS. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Refer to code 1067 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.