er used for sale

Cutting length : 3000 mm Max. cutting thickness : 13 mm Machine is in good condition

Machine is in good condition but you need to order new Control Panel! Maximum cutting length : 3100 mm Maximum cutting thickness : 20 mm

Bending length : 3000 mm 200 Ton Control unit : Cybelec Machine is in good condition

Ermak Power-Bend Pro CNC Press Brake 135 Ton Number of axis : 7 Delem 66 control unit Machine is in very good condition

Ermak SM6000 Laser Cutting Machine All maintenance has been done Machine is in very good condition

Ermak AP 2600-60 NC Press Brake Bending length : 2600 mm 60 Ton Machine is in good working condition

Ermak Power-Bend Pro 135 Ton CNC Press Brake Folding length: 3100 mm 135 Ton Machine is in good working condition

Ermak MOMENTUM G-5 G FORCE 6 KW Laser Cutting Machine Double table: 1500 mm x 3000 mm Power: 6000 watt Resonator: IPG

Ermak Power-Bend Pro 2100x60 CNC Press Brake 60 Ton Machine is in excellent condition

Ermak 3100 x 250 CNC Press brake Folding length : 3100 mm 250 Ton Number of axes : 4 Manual Crowning Fully revised machine

Ermak Power Bend Pro 3100 x 220 Ton CNC Press Brake Folding length : 3100 mm 220 Ton Machine is in good working condition

Ermak Power-Bend Pro 2100 x 60 Machine is like new Bending length : 2100 mm 60 Ton Axes : 4 (Y1,Y2,X and Z)

THREE-PHASE INDUCTION MOTOR MANUFACTURER: EBERLE MODEL: B 130 - L8 No. 075/0106 15 HP 11KW 60 HZ 870 RPM INCOME: 90.0% COS 0.70 IP/IN 5.1 ISOL. F CAT. N REG SL IP 55 FS1.15 BEARING - INTERV. LUB - QT GREASE - TYPE OF GREASE LA 6311.03 20,000 HS 20 g POLYREX LOA 6311.03 20,000 HS 20 g MASS 134 KG

Maffel Erika DGA 900 Double miter stop G&MAFELL-038560

Manufacturer: Germany Year of release: 2005 Clamping force: 1000 t Raw material injection volume: 4372cm3 Built-in mold height max: 1200 mm Built-in mold height min: 500 mm Auger diameter: 95 mm Working equipment, serviced.

Centrifugal wastewater treatment equipment (centrifuge) Year 2019 It is used for continuous wastewater treatment with the possibility of returning the purified water for reuse. Offered device with a manual sludge removal system. Automatic control with a touch controller. Dirty water tank 200l Flow up to 800L/h

Erka Long Scooter Type: MK-B 50 Run-off belt Band width inside: 48cm Strap: 60cm with lower frame on wheelchairs ready for action tested & cleaned Height: 152cm Width: 80cm Depth: 100cm

Spare parts for Nagema packaging machines PA1 / HM4 etc. Complete format sets for Nagema flow wrapping machines. Various stainless steel fittings ( 2 & 3 - waycock, arches, butterfly valves etc. )

Control Cybelec ... DNC 60 cutting length ... 2600 mm sheet thickness ... 8mm Drive... Hydraulic L x W x H ... 3550x2020x1850mm Machine weight... 6200kg Main engine power ... 15kW The machine is in good condition, possible to test under power.

Sell a new Erowa angle head, this comes from a measuring machine and is therefore still very well preserved. No cooling medium or other liquid treatment. approx. dimensions 100mm100mm160mm high

Iberdrill Gear Column Drill Series T, TL25 drilling capacity for steel (ST 60) at continuous power S1: D25mm drilling capacity for grey cast iron (GG 20) with continuous power S1: D30mm thread cutting capacity for steel (ST 60) with continuous power S1: M 18 thread cutting capacity for grey cast iron (GG 20) with continuous power S1: M 22 Tool holder in the spindle: MK 3 spindle stroke (drilling depth): 120 mm Motor power spindle: 0.82/1.2 kW Drive: 8-speed gearbox with pole-shiftable motor Speed adjustment: manual Speed range for 50 Hz motor, n=1,500/3,000 rpm, pole switchable 65 -125 -185 - 365 - 540 - 1,055 - 1,560 - 3,060 rpm Feed: 300 mm x 270 mm Column diameter: 100 mm Distance spindle center / column (projection) 250 mm Machine weight (net) 250kg Gross weight 310kg Dimensions transport packaging (LxWxH) 2.14m x 0.6m x 0.8m Gearbox ...

Brushes + grinding machine Erma Fabr. Erma Type. DG 243 Engine. 1.5 kW Turn. 1430 rpm

sheet width: 3100 mm plate thickness: 13,0 mm thickness at Niro-steel: 8,0 mm down holder: 14 Stück no. of strokes: 11 - 20 Hub/min oil volume: 310 ltr. cutting angle: 0,05 - 2,0 ° throat: 350 mm table height: 900 mm total power requirement: 22,0 kW weight of the machine ca.: 13.300 kg range L-W-H: 5.110 x 2.570 x 2.400 mm -------------------------------------------------- heavy electr. / hydraulic CNC guillotine shears - guided by a backdrop with CYBELEC CNC touch screen control with electr. / hydr. Cutting gap and cutting angle adjustment -------------------------------------------------- Furnishing: - CNC guillotine guiding shears - with electr. / hydr. Cutting gap and cutting angle adjustment - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Number of pieces Cutting length limitation Material preselection, includi ...

roll diameter: 550 mm roll length: 1500 mm rolls drilled: peripher Nip adjustment: hydraulisch 0 total power requirement: 90 kW Condition: used, overhauled Specification: rolling mill 550 x 1500 mm - used - roll diameter: 550 mm - roll length: 1500 mm - monoblock - motor under the rolls - Fixed friction between the rolls - Rolls: peripherally drilled, for water cooling - Gap adjustments: NEW hydraulic - Hydraulic unit: NEW - tiltable steel material guide jaws - Rollers: mounted on bronze bushes with oil circulation lubrication via pump - new ball bearing slewing rings for connection to water circuit - Safety brake for EMERGENCY STOP - New AC motor 110 kW - 400 V - 50 Hz - New pan for receiving the mixture - Safety bars bi-directional - New electrical control cabinet with PLC system S7-1200 - New frequency converter for 110 kW, f ...

re-granuling-line for PO-films

sheet width: 3100 mm plate thickness: 10 mm rear stop: 1000 mm throat: 350 mm cutting angle: 2,0 ° down holder: 14 Stk no. of strokes: 13 Hub/min total power requirement: 22 kW dimensions of the machine ca.: 4050 x 2500 x 2170 mm weight of the machine ca.: 10575 kg -------------------------------------------------- --------- heavy electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment -------------------------------------------------- --------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Number of pieces Cutting length limitation Material preselection, including sheet thickness Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. Can be folded up at max.tra ...

sheet width: 3100 mm plate thickness: 6 mm rear stop: 1000 mm throat: 350 mm cutting angle: 0,5 - 1,5 ° down holder: 14 Stk no. of strokes: 16 - 24 Hub/min total power requirement: 11 kW dimensions of the machine ca.: 4100 x 2200 x 2190 mm weight of the machine ca.: 7060 kg -------------------------------------------------- --------- heavy electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment -------------------------------------------------- --------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Number of pieces Cutting length limitation Material preselection, including sheet thickness Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. Can be folded up a ...

sheet width: 3100 mm plate thickness: 6 mm rear stop: 1000 mm cutting angle: 1,2 ° down holder: 14 Stk no. of strokes: 18 Hub/min total power requirement: 11 kW dimensions of the machine ca.: 4.000 x 2.100 x 1.640 mm ----------------------------------------------------------- electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment ----------------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Number of pieces Cutting length limitation Material preselection, including sheet thickness Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. can be folded up at max.travel, for longer cuts - 1x side stop - 2x front support ar ...

sheet width: 3100 mm plate thickness: 6 mm rear stop: 1000 mm cutting angle: 1,2 ° down holder: 14 Stk no. of strokes: 18 Hub/min total power requirement: 11 kW dimensions of the machine ca.: 4.000 x 2.100 x 1.640 mm ----------------------------------------------------------- electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment ----------------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Number of pieces Cutting length limitation Material preselection, including sheet thickness Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. can be folded up at max.travel, for longer cuts - 1x side stop - 2x front support ar ...

sheet width: 3100 mm plate thickness: 10 mm rear stop: 1000 mm throat: 350 mm cutting angle: 2,0 ° down holder: 14 Stk no. of strokes: 13 Hub/min total power requirement: 22 kW dimensions of the machine ca.: 4050 x 2500 x 2170 mm weight of the machine ca.: 10575 kg -------------------------------------------------- --------- heavy electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment -------------------------------------------------- --------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Number of pieces Cutting length limitation Material preselection, including sheet thickness Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. Can be folded up at max.tra ...

Machine Type: Force Gauge Manufacturer: Erichsen Type: 465-5KN Condition: used / good Offer will only be sent if a complete imprint is provided! Price 950 Euro incl. 19% VAT Location Warstein , Germany Reference M-SCH-SCH-0623 DESCRIPTION We offer you a used force gauge from the manufacturer Erichsen, incl. undertable. Exclusive load cell. Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers are excepted!

Press type: PME 315 T Drive system: Eccentric Type of used tools Progressive Nominal force: 3150 kN Rating above BDC mm Material flow L->R - Maximum SPM: 75 1/min Minimum SPM: 20 1/min Maximum shut height: 525 mm Minimal shut heigh:t 325 mm Slide adjustment: 130 mm Maximum slide stroke: 210 mm Minimum slide stroke: 40 mm Bolster specification Bolster dimension: 2220 x 1225 mm T-slots in bolster: T28 H8 DIN650 - Draw cushion N/A - Draw cushion stroke: N/A mm Draw cushion force: N/A kN Draw cushon dimension: N/A mm Maximum weight: kg Ram specification Ram dimension: 2220 x 1225 mm T-slots in ram: T28 H8 DIN650 - Max. upper die weight: 3600 kg Tool manipulation Tool is manipulated by forklift - Max. tool weight: 5500 kg Forks size/pitch: 150x60/940 mm Lower die clamp height: 50 mm Upper die clamp height: 50 mm Tool locating (centering) stůl/bolster  ...

10000 liters diesel storage tank, tested as new.

tube diameter: 42,0 mm Stahl wall strength: 3,0 mm Stahl tube diameter: 54,0 mm CU/Alu wall strength: 2,0 mm bar material - diameter: 30,0 mm revolutions per minute: 2,0 U/min voltage: 400 Volt total power requirement: 1,1 kW weight: 80,0 kg range L-W-H: 410 x 1000 x 570 mm ERCOLINA MediBender MB 42 M - Capacity steel tube 42 x 3.0mm - Gas tube capacity 11/4 gas x 3.5 mm - Capacity square profile (FE 42) 35 x 35 x 3 mm - Max. bending radius 10-260 mm - Minimum radius 2 x D - Hex tool holder - Min. outer diameter 5 mm - 1/8 gas Furnishing : - Patented quick tool change system - a bending speed - free-moving footswitch including ERCOLINA microprocessor control: - with 30 programs (0 - 29) - Each program can be programmed with up to 9 bending angles - In addition, in the work mode for each bending angle necessary correction angle must be entered The data for this ad was created with Modu ...

Grinding machine for machine tools, especially small lathes, etc.

BN 102 C Producer Tos Swing 280 mm Distance between centres 630 mm Cross table adjustment 250 mm Longitudinal table adjustment 510 mm Vertical milling head adjustment 290 mm Machine weight 1000 kg

3 axes: Y1 / Y2 / X Capacity: 200 ton x 3600 mm Backgauge: CNC Control: Elgo Passage between uprights: 3050 mm Depth of throat: 400 mm Locking speed: 80 mm/sec Working speed: 7 mm/sec Returning speed: 70 mm/sec Electric motor (power): 15 kW Length: 4000 mm Depth: 2200 mm Height: 2800 mm Weight: 12 ton

All-stainless steel visual inspection box EREA, year 2013 Set of 4 units

Mettal cutting shears BEM Berlin-Erfurter Maschinenfabrik STA3/3/2050 2 Working condition.

Ermak Fibermak Momentum Gen-3 4 KW Fiber Laser Cutting Machine 6000 mm x 2000 mm Machine is in very good condition All maintenance has been done regularly

Manufacturer Ermak Model Lasermak 6000.6x2 Year 2012 Co2 laser cutting machine 6000 x 2000 6000 kW

Ermak Fibermak 4000.6x2 Fiber Laser Cutting Machine Double tables 6000 mm x 2000 mm Power : 4 KW Machine is in very good condition

Ermak Lasermak 2500.2,5 x 1,25 Laser Cutting Machine Machine did not cut anything thicker than 1 mm Maintenance has been done by Ermak Machine is in very good condition Power : 2500 W

Ermak Fibermak Momentum Gen-2 Laser Cutting Machine Power : 2 Kw 3000 mm x 1500 mm Machine is in good working condition

Ermak Lasermak 4000 3x1.5 Laser Cutting Machine Machine is in good working condition Power : 4000 W

Ermak Fibermak Momentum Gen-2 Fiber Laser Cutting Machine Working hour: 22900(December 2023) Machine is in good working condition

Compressors on chiller unit are new Resinator has been renewed in 2012 ( by Ermaksan) 4000 W Power 3000 mm x 1500 mm Machine is in good condition

tube diameter: 60 mm wall strength: 3 mm bending radius min.: 2 x Rohr-Ø ÷ R200 mm bending angle: 0 - 180 ° gas tube pipelines: 2 (60.,3mm) mm speed: stufenlos 0,5 - 2,0 total power requirement: 1,5 kW weight of the machine ca.: 0,7 t - Powerful mandrel bending machine up to 2 gas pipe (60.3mm) in semi-automatic design (6000 mm pipe slide length) - Electromechanical drive of the bending axis - hydraulic clamping - mandrel feed / extract - 30 programs x 9 bending angle + correction angle The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.