er used for sale

max. Working Diameter 1100 mm EXCELLENT CONDITIONS

Spare parts suitable for sacred V-mix, Nautamix, NAUTA -, Foeth mixer, Vrieco - cone mixer second-hand machine You are looking for replacement parts for your cone mixer? We have the most common spare parts for various products such as E.g. Nautamix, v mix, Vrieco-mixer etc. in stock, or they can customize quickly and cost-effectively in our workshop. -Mixing augers -Spare or replacement transmission -Spare or replacement swing arms - gears, shafts, seals -Top bearings -Universal joints -Radial storage -Outlets -Etc. In addition, we have a repair and maintenance service. We like to submit a non-binding offer. Email: t.roechter@heiligbv

Used - parts, etc. Front axle - rear axle - steering cylindrical - Lenkorbitrol - diesel engine - seat - fittings - steering column cover - hood - gears - lights - hydraulic - cutting spindles - steering wheel - cooler - fuel pump - tank - snake - switch -. Bonnet etc.

Pump Allweiler SNEF120ER46D6.9W61-BGOR - see picture Next: ALWEILER pump with tank Diverse pumps ALLWEILER - for cooling etc., approx. 40 bar (see picture)

Different parts of the B & Z - sorting carriage are for sale.

Key data: 150 , 394 , 50

Manufacturer/manufacturer: Krauss Maffei Typ/type: KM 110-390 C1 Year/year: 1993 Control/controller: MC 4 Clamping force/clamping force: 1500 kN Holmabstand/Dist.Betw.Tiebars: 500 mm x 500 mm Disk size/platen size: 750 x 750 mm WZ height/mould hight: min 250 max 500 mm Opening/opening stroke: 500 mm Plate distance of max/Max open daylight: 1060 mm Auger/screw size: 50 mm Stroke volume/shot volume: 442 CC / 394 gram PS Spritzdr / injection pressure: 1946 bar General / General engine power: 30 kW Heating/heating power: 14,8 kW Dimensions/dimensions: 5.5 m x 1.6 m x 2.10 m Weight/weight: 5600 kg Screen text: German Options/optional extras Core puller / core pulling: x 1 Air valve / air valve: x 1

Mesh belt for AUMA / Rotocure new and unused Length: 14100mm Width: 2250mm

Technical description: -Trimming unit -Milling unit -Fine trimming unit -Scraper -Buffing unit

Nr. 02 VERTICAL LATHES FAMAR MODEL: ERGO 230 SERIAL NUMBER: FAMAR NR. 20.09/1-20.09/2 SWITCHABLE Ø: 250 MM SWITCHABLE HEIGHT: 125 MM Ø SELF-CENTERING: 250 MM SPINDLE ATTACHMENT: 6 ASA ROTATIONAL SPEED: 6000 RPM TOOLHOLDER STATIONS: NR. 12 MOTORABLE: NR. 12. CONTROL: SIEMENS 810

VERTICAL LATHE FAMAR MODEL: ERGO 210 YEAR: 1995 SERIAL NUMBER: FAMAR NR. 95/12 MAX MACHINABLE DIAMETER 200 MM LENGTH OF WORKPIECE MAX MACHINABLE 150 MM X-AXIS STROKE: 340 MM Z-AXIS STROKE: 215 MM FAST AT 60 M/MIN ASA CHUCK NOSE 6 " SPEED: 6000 RPM

Small vibrating sieve with two decks for three fractions. The diameter of the sieve inserts is 400 mm. This includes a bet with balls that keep the screen insert clean from below. This is suitable, for example, for the screening/classification/quality assurance of copper granules (contamination by plastics or aluminium are sifted) or for the re-treatment of plastic granules from the cable recycling. The sieve is located in our demo pool and is little needed.

VA stainless steel mixing tank mixing tank with 2 storage tanks and diaphragm pumps of new condition Manufacturer: Mischmischmischtechnik Hoffmann & Partner Type: ERA 300 Y.O.M.: 2008 / No. 6151 Stirrer tank approx. 700 mm Stirring tank capacity 300 litres Stirring drive/gear motor - North SK 100L/4 TF; 220/380 V; 9.0/5.2 A; 50 Hz; IP55 - 2.20 kW; 1440/321 rpm Outlet at the bottom with pneumatic control valve System with 2x diaphragm pump "verder CX 20 ETZ". with 2x storage tank volume 220 liters each (approx. 550 mm x 1000/1400 mm) Stirring tank with filling hopper with collecting tray (all components are attached to the tub) see more pictures Total approx. 1800 x 1300 H 2300 mm The plant was previously used to mix glycerine.

Key data: 500 , 94 , 30

Manufacturer/Manufacturer Manufacturer: Demag Typ/Type: Ergotech 50-270 per Bau-year year: 1997 Control/Controller: NC 4 Clothing Power/Clamping Force: 500 kN Schliessart/Clamping Type: Hydraulisch/Hydraulic Holmabstand/Dist.Betw.Tiebars: 355 mm x 355 mm Plate Groesse/Platen Size: 540 mm x 540 mm WZ Einbauhoehe/Mould hight: min 210 mm Oeff-weg/opening stroke: 400 mm Plate distance max/Max. Open Daylight: 610 mm Snail/Screw size: 30 mm Lifting volume/shot volume: 144 cc/128 gram hp Spez. Spray./injection pressure: 1890 bar General General Motor/Motor Power: 11 kW Heating/heating power: 7.5 kW Dimensions: 3.6 m x 1.2 m x 1.8 m Weicht/Weight: 2500 kg Screen text/Language: Deutsch/German Additional equipment/Additional equipment Euromap Core train x1 Air valve x1

Key data: 500 , 128 , 35

Manufacturer/Manufacturer Manufacturer: Demag Typ/Type: Ergotech 50-270 viva Bau-year year: 1997 Control/Controller: NC 4 Clothing Power/Clamping Force: 500 kN Schliessart/Clamping Type: Hydraulisch/Hydraulic Holmabstand/Dist.Betw.Tiebars: 355 mm x 355 mm Plate Groesse/Platen Size: 540 mm x 540 mm WZ Einbauhoehe/Mould hight: min 210 mm Oeff-weg/opening stroke: 400 mm Plate distance max/Max. Open Daylight: 610 mm Snail/Screw size: 30 mm Lifting volume/Shot volume: 106.5 cc/95 gram hp Spez. Spray./injection pressure: 2573 bar General General Motor/Motor Power: 11 kW Heating/heating power: 7.5 kW Dimensions: 3.6 m x 1.2 m x 1.8 m Weicht/Weight: 2500 kg Screen text/Language: Deutsch/German Additional equipment/Additional equipment Air valve x1

Key data: 600 , 52 , 25

Manufacturer/Manufacturer Manufacturer: Demag Typ/Type: Ergotech 60/420-200 Bau-year year: 1999 Control/Controller: NC 4 Control Clothing Power/Clamping Force: 600 kN Schliessart/Clamping Type: Hydraulisch/Hydraulic Holmabstand/Dist.Betw.Tiebars: 420 mm x 420 mm Plate Groesse/Platen Size: 570 mm x 600 mm WZ Einbauhoehe/Mould hight: min 210 mm Oeff-weg/opening stroke: 400 mm Plate distance max/Max. Open Daylight: 610 mm Snail/Screw size: 25 mm Lifting volume/shot volume: 61 cc/52 gram hp Spez. Spray./injection pressure: 2740 bar General General Motor/Motor Power: 22 kW Heating/heating power: 8.3 kW Dimensions: 3.7 m x 1.6 m x 2.1 m Weichtt/Weight: 3900 kg Screen text/Language: Deutsch/German Additional equipment/Additional equipment Core train x1 Air valve x3

Complete dairy - Plate heat exchanger / milk heater from API Schmidt boards automatic heating system including documentation and temperature recording - 3 x tank storage 1000 l. each with agitator (insulated) - CIP cleaning system 3 x stainless steel container (500 l.) with direct steam injection - Process tank 160 Ltr. Content

Manufacturer: EM HART Teknologies (Tucker GmbH) Type: ERF230000/3 3x5

STANZNIETZUFÜHRER Manufacturer: EM HART Teknologies (Tucker GmbH) Type: ERF230000/3 3x5

Key data: 500 , 41 , 22

Manufacturer: Demag Type: Ergotech 35-115 viva Built: 1998 Control: NC 4 Closing type: Hydraulic Closing force: 350 kN Tie bar distance: 280 mm x 280 mm Plate size: 410 mm x 410 mm Tool installation height: min 180 mm Opening distance: 350 mm Plate spacing max.: 530 mm Screw: 22 mm Lifting volume: 47.5 cc / 41 gram ps Spray pressure: 2440 bar General Engine: 7.5 kW Heating: 6.3 kW Dimensions: 3 m x 1.1 m x 1.6 m Weight: 2500 kg Screen text: German Additional equipment Core train: x1

Key data: 800 , 149 , 35

Manufacturer: Demag Type: 80/420 - 310 concept Built: 2005 Control: NC 4 Control Type of closure: Hydraulish Closing force: 800 kN Tie bar ratio: 420 mm x 420 mm Plate size: 580 mm x 590 mm WZ Installation height: 250 mm Opening distance: 500 mm Plate spacing max: 750 mm Screw: 35 mm Lifting volume: 149 gram PS / 168.3 cc Spray pressure: 2020 bar General Engine: 18.5 kW Heater: 8.8 kW Dimensions: 3.9 m x 1.4 m x 1.9 m Weight: 4100 kg Screen text: German Optional extras Core train: x1

Key data: 1000 , 205 , 40

Manufacturer: Demag Type: 100/420 - 430 concept Built: 2004 Control: NC 4 Control Type of closure: Hydraulish Closing force: 1000 kN Tie bar ratio: 420 mm x 420 mm Plate size: 590 mm x 600 mm WZ Installation height: 250 mm Opening distance: 500 mm Plate spacing max: 750 mm Screw: 40 mm Lifting volume: 231 cc / 205 gram PS Spray pressure: 2020 bar General Engine: 18.5 kW Heater: 11.1 kW Dimensions: 4.9 m x 1.6 m x 2.1 m Weight: 4800 kg Screen text: German Optional extras Core train: x1 Air valve: x1 Robot interface

ELKOMAK ERD 312 Compressed air dryer 312m3/h Bj 2013,

Key data: 350 , 41 , 22

Manufacturer: Demag Type: Ergotech 35-115 viva Built: 2000 Control: NC 4 Control Closing type: Hydraulic Closing force: 350 kN Tie bar distance: 280 mm x 280 mm Plate size: 410 mm x 410 mm Tool installation height: min 180 mm Opening distance: 350 mm Plate spacing max.: 530 mm Screw: 22 mm Lifting volume: 47.5 cc / 41 gram ps Spray pressure: 2440 bar General Engine: 7.5 kW Heating: 6.3 kW Dimensions: 3.1 m x 1.1 m x 1.6 m Weight: 1800 kg Screen text: German Additional equipment Picker Air valve: x1

HB QUICKMASTER 46-2 FOR SPARE PARTS M. No.: 964301 Format (cm): 34x46 Condition: Not in operation (central electronic board) // All other machine parts are in good working condition

DEMAG ERGOTECH- EL-EXIS E 1000/420-310 (130) Built: 2003 specifications Screw diameter [mm]: 35 Spray weight [g]: 150 Spray pressure [bar]: 1865 Closing force [kN]: 1000 Tie bar distance [mm]: 420x420 Clamping plate size [mm]: 600x600 Tool installation height min. [mm]: 200 control Control: ERGOcontrol Monitor: Yes Control cabinet: Yes Language: Yes other Power [kW]: 46.7 Engine hours [h]: 67455 Dimensions [m]: 4.6x1.5x2.1 Weight [kg]: 6500 - KNIESCHLIESSEINHEIT - CORE TRAIN - EUROMAP - AIR VALVE

Description 250 kVA, Machine was only in use from 1992-1996

complete set: DEMAG 50T ERGOTECH COMPACT 50-200 1999 (-) ENGEL 75T ES330/75 VICTORY 2001 (working hours 81694) working good tech. condition T557211 for both machines 10 000 EUR

Key data: 1500 , 210 , 40

Manufacturer: Demag Type: 150/475 - 440 concept Year of construction: 1999 Control: NC 4 Control Locking type: Knee lever Closing force: 1500 kN Tie bar spacing: 475 mm x 450 mm Plate size: 690 mm x 660 mm WZ Installation height: min 230 max 460 mm Opening distance: 450 mm Plate spacing max: 910 mm Screw: 40 mm Lifting volume: 231 ccm / 210 gram PS Injection pressure: 1855 bar general Engine: 22 kW Heater: 11.7 kW Dimensions: 4.9 m x 1.6 m x 2.1 m Weight: 6600 kg Screen text: German Optional extras Core train: x1 central lubrication Air valve Robot interface

Key data: 350 , 78 , 30

Manufacturer: Demag Type: Ergotech 35/320 - 120 concept Year of construction: 2005 Control: NC 4 Control Closing type: Hydraulic Closing force: 350 kN Tie bar spacing: 320 mm x 320 mm Plate size: 460 mm x 450 mm Tool height: min 180 mm Opening distance: 350 mm Plate spacing max.: 530 mm Screw: 30 mm Lifting volume: 88.3 cc / 78 gram PS Injection pressure: 1393 bar general Engine: 11 kW Heating: 8.3 kW Dimensions: 3.4 m x 1.2 m x 1.8 m Weight: 2750 kg Screen text: German Additional equipment Robot interface Core train: x1 Air valve: x1 Temperature control point for hot duct

sheet width: 1020 mm plate thickness: 2,75 mm 400N/mm² daylight opening: 45 mm bending angle max.: 0 - 135 ° weight of the machine ca.: 285 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Braking resistor, original packaging, ERBG012R01K9 Lenze, new Attention: Original Lenze product - No replica from… - incl. manual Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in ist original packaging. Function warranty! For second hand parts, we can not provide a conventional warranty and guarantee. However, we give you a functional guarantee. If the device does not work in the course of commissioning, you can return the goods and we will refund the purchase price.

clamping force: -- kN injection volume: 230 cm³ screw diameter: 40 mm platen size: 475 x 475 mm Condition: used, Specification: Horizontal injection moulding machine, injection unit: - Screw diameter: 40 mm - Cylinder diameter: 40 mm - Spraying volume: 230 cm³. Clamping unit: - tie bar distance: 475 x 475 mm - Operating hours approx.: 30000 h - Air valve - Core pull - 12-way hot runner controller The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tool adaptor: ISO 40 - 50 turning speed range: 1800 - 4000 U/min drive motor: 5 - 30 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 75 t throat: 300 mm stroke: 8 - 110 mm table surface area: 750 x 600 mm ram adjustment: 75 mm ram surface: 430 x 230 mm hole in the table: 250 x 150 mm tool hole in ram: 40 mm no. of strokes: 60 + 90 Hub/min weight of the machine ca.: 4,4 t total power requirement: 4,5 - 6,8 kW dimensions of the machine ca.: 1,95 x 1,1 x 2,35 m distance table/ram: Hub unten, Stöß. unten 19 mm distance table/ram: Hub oben, Stöß. oben 380 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t throat: 300 mm stroke: 20 - 124 mm strokes per minute: 60/90 ram adjustment: 85 mm table surface area: 920 x 600 mm ram surface: 540 x 290 mm daylight, max. stroke above - ram adjustment above: max. 440 mm hole in the table: 290 x 170 mm tool hole in ram: Dm. 50 mm total power requirement: 6,5 - 8,5 kW weight of the machine ca.: 5,7 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Steam generation plant consisting of Double flame tube boiler with economiser, 2 x SAACKE burner Teminox for natural gas H, calorific value HS 11.4 kJ/Nm³, 14MW (2 x 7 MW), 17 to. Saturated steam at 20 bar ü (25 bar hp). Boiler: Manufacturer LOOS Deutschland GmbH Type ZFR 2300 Type of large-capacity water boiler with two flame tubes (three-speed) and a flue gas water preheater (Economizer) Permissible operating pressure (PS): 24-25 bar Permissible operating temperature: 224°C Permissible steam output: 23 to. Saturated steam Burner: 2 x SAACKE Type Teminox GS 75-22 Fuel: Natural gas There is a soundproofing hood for each burner Fireplace: 37 meters above ground Outlet area: 0.507 m² Stainless steel double fireplace Water treatment plant Manufacturer CHRIST consisting of softening system and downstream reverse osmosis system Complete installation from y ...

1 of used carton erector with bottom sealer, make STORK, type SA-25L (KOALA), new 1989, size adjustable. With Siemens S5-100U PLC, Nordson 2302 hot-melt unit and blank feed conveyor. Left to right as seen from operator’s side. Capacity maximum 25 cartons/minute (depending on size). Carton dimensions: length: 150 - 450 mm, width: 100 - 400 mm, height: 180 - 400 mm. Blank dimensions: min 250 x 280 / max 850 x 750 mm. Fully guarded. Manuals available.

Grinding length: 500 mm Grinding diameter: 300 mm Grinding wheel diameter: 400 mm Equipped with: - Bezel - Grinding wheels Country of origin: Germany Machine LxWxH: 2300 x 1700 x 1700 mm Machine Weight: 3500 kg

63mm x 2mm AEF / Thermatool ERW Tube Mill Make: AEF (American Electric Fusion) Tube Diameter: 15mm – 63.5mm Material Thickness: 0.5mm – 2mm Tube Length: 6 meters Double Mandrel Uncoiler Entry Shear & End Welder TIG Power Supply Vertical Accumulator Make: Kent Driven Entry and Exit Pinch Rolls Strip Guiding Unit Forming Mill Individual Gear Boxes Universal 50HP DC Motor Six (6) Forming Stand Five (5) Side Stands Welding Section Make: Thermatool Type: Vacuum ERW Design Power: 200Kw Mechanical Welding Head Beat Removing Head with Winder Cooling Tank & Pump

Universal external cylindrical grinding machine make ZIERSCH & BALTRUSCHType URS 400 Ergonomy Masch. -No: 80052 built in 1981Technical specifications:Grinding length: 320 mmCenter height: 100 mmDistance between centers: 400 mmGrinding wheel size: 350 x 50 x 127 mmGrinding wheel speed: 1800, 1970, 2170 rpm.Pivotability of the grinding spindle head: 45 °Infeed of the grinding support: 0.001 - 0.025 mmPlunge grinding infeed: 0.05 - 10 mm / min.Swiveling of the table: 10 °Table speed stepless: 0.04 - 5.0 m / min.Drive power: 3.0 kWWeight about 1550 kgWith- Internal grinding device- Set of collets- cooling system- dresserused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries ...

screw size:30 mm injection shot weight in Polysterol:100 g clamping force:600 kN screw size:30 mm max. swept volumne:106 cm³ injection shot weight in Polysterol:100 g/PS injection pressure:2.750 bar closing pressure:60 t tie bar distance:370 x 370 mm mould hight - min.:160 mm opening stroke:350 mm microprocessor control:NC4 screen text:deutsch Manual:deutsch robot interface:Euromap 12 core pull:1 x without hopper / without water distributor:-/- pump drive power:5,5 kW total connection power:45,0 kW total weight:5.000 kg :4,6 x 1,5 x 2,0 m Electric dosing: 15 kW Electric clamping: 9,8 kW Payment: 100% prior to delivery

Shelf shelves, plug-in system, manufacturer dalminels, 1,30m x 0,60m (other dimensions available), frame height 2,20m (other heights available) – new - : Price per base field: 129.-€ (net)! Price per cultivation field: 109.-€ (net)! Acceptance only by truck, otherwise the transport costs are likely to be too high in relation to it! Approx. 300 – 350 fields can fit per truck (depending on the configuration) manufacturer: dalminels, Italy Type: Errex Year of construction: New! Galvanized Frame height approx. 2.20m (other heights e.g. 2m on request)! Payload per level: 141kg 5 floors per field – additional soils for an extra charge Shelves: approx. 1.30m x 0.60m (the floors consist of 3 sheets at a depth of 20cm) In this system, the floors on the sides are plugged into a rail. Condition: New Available: Delivery time: approx. 8 weeks, but usually faster,  ...

Shelf shelves, plug-in system, manufacturer dalminels, 1,30m x 0,60m (other dimensions available), frame height 2,20m (other heights available) – new - : Price per base field: 129.-€ (net)! Price per cultivation field: 109.-€ (net)! Acceptance only by truck, otherwise the transport costs are likely to be too high in relation to it! Approx. 300 – 350 fields can fit per truck (depending on the configuration) manufacturer: dalminels, Italy Type: Errex Year of construction: New! Galvanized Frame height approx. 2.20m (other heights e.g. 2m on request)! Payload per level: 141kg 5 floors per field – additional soils for an extra charge Shelves: approx. 1.30m x 0.60m (the floors consist of 3 sheets at a depth of 20cm) In this system, the floors on the sides are plugged into a rail. Condition: New Available: Delivery time: approx. 8 weeks, but usually faster,  ...

: 135 t : 3100 mm : 2600 mm : 400 mm : 200 mm : 800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DATA ABOUT THE MACHINE Machine type: CNC lathe Manufacturer: Gildemeister Type: CTX400 Year of construction: 1993 Condition: used Location Warstein , Germany Reference M-GIL-0922 DESCRIPTION We offer you a used CNC lathe from the manufacturer Gildemeister NEF. Technical data (without guarantee) Circulation diameter over bed: 500 mm Turning length: 600 mm Number of spindle rotations: 20 - 5000 rpm Number of tools: 12 Spindle bore: 72 mm Tailstock pinole diameter: 80 mm Tailstock pinole stroke: 100 mm Total power requirement: 45KVA Space requirement approx.: 4.5 x 2.0 x 1.8 m Drive for driven tool (tool turret) without function Machine is in continuous production. Availability: From mid-Oct. 2022 Our offer is aimed at commercial persons who are covered within the meaning of the Trade Code according to §14 GewO. The offer is subject to change, subj ...