er used for sale

: neu : ca. 8 Wochen ab Auftragse : Spanien : 16960 € : 325.63 € : 40 mm : MK 4 : 360 mm : 61 - 1.169 (9) U/min : 2.2 kW : M33 : 550 mm : 950 mm : 2363 mm : 610 kg : 0,1 / 0,2 / 0,3 / 0,4 mm/U : 200 mm : 175 mm : 35 - 835 mm : 1240 mm : 550 x 550 mm : 950 x 550 mm ERLO(MADE IN SPAIN) FOR MANUFACTURING USE automatic feed gear drive fixed machine table displaceable and rotatable drill head tiltable turntable front wheel for sensitive fine feed coolant equipment lighting OPTION (PRICE ON REQUEST): Manual tapping system ALTERNATIVE: ERLO B-40 VERSION WITH ELECTROMAGNETIC CLUTCH PRICE ON REQUEST The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mm plate thickness: 6 mm rear stop: 1000 mm cutting angle: 1,2 ° down holder: 14 Stk no. of strokes: 18 Hub/min oil volume: 150 l total power requirement: 11 kW dimensions of the machine ca.: 3900 x 1900 x 1600 mm weight: 5500 kg Equipment: - Hydraulic swing cut shears - ELGO control system - Electric backgauge 1000 mm - Manual cutting gap adjustment - Cutting length limitation - Ball rollers in the table - 2x front support arms - 1x front side stop with scale - Front finger guard, hinged - Rear safety device (protective grille + light barrier) - Foot switch - Operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 600 kN, 94 g/PS, 30 mm

Clamping force: 60t Year of Make: 2001 Injection weight in hp: 94g Injection Unit .../200 Screw diameter 30 mm Spec. Spray pressure 1995 bar Injection volume 106 cc Injection weight in hp 94 g L/D Screw Ratio 20 Clamping unit 600/... Clamping force 60 t Size of the clamping plates 600 x 600 mm Lights spar spacing 420 x 420 mm Tool installation height 200 mm Opening way 550 mm Max. panel spacing 750 mm Weight 3950 kg Dimensions(m) LxWxH 4.2 x 1.4 x 2.0 m Year of construction 2001 Control type NC4

Key data: 600 kN, 94 g/PS, 30 mm

Clamping force: 60t Year of Make: 2001 Injection weight in hp: 94g Injection Unit .../200 Screw diameter 30 mm Spec. Spray pressure 1995 bar Injection volume 106 cc Injection weight in hp 94 g L/D Screw Ratio 20 Clamping unit 600/... Clamping force 60 t Size of the clamping plates 600 x 600 mm Lights spar spacing 420 x 420 mm Tool installation height 200 mm Opening way 550 mm Max. panel spacing 750 mm Weight 3950 kg Dimensions(m) LxWxH 4.2 x 1.4 x 2.0 m Year of construction 2001 Control type NC4

: neu : ca. 10 Wochen ab Auftrags : Türkei : 55300 € : 1045.17 € : 2550 mm : 2.5 mm : 1.5 mm : 3.5 mm : Motorisch : 3830 mm : 2200 mm : 1900 mm : 4050 kg : 1000 mm CNC control with tabular programming - 15,6", touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page Motorized drive (servo motors) of the upper and bending beam (Z and Y axes) Motorized back stop (X axis) with servo drive, 1000 mm, rectangular configuration, with ball roller ...

: neu : 2024 : 3983 : prompt, Zwischenverkauf v : Spanien : 7400 € : 142.82 € : 1 : 1 : 32 mm : MK 3 : 250 mm : 65 - 125 - 185 - 365 - 54 U/min : 1,8 / 2,6 kW : M24 : 600 mm : 640 mm : 2020 mm : 260 kg : 100 mm : 85 - 635 mm : 1.170 mm : 300 x 270 mm : 600 x 380 mm : 120 mm ERLO (MADE IN SPAIN) FOR DEMANDING WORKSHOP USE geardrive machine manual feed left-right drilling table with t-slots depth adustable end tool ejector drill guard CE norms user manual in GERMAN (sample photo) OPTIONS (PRICES ON REQUEST): lighting equipment coolant equipment and machine base with T-slots reverse for tapping DELIVERY TIME WITH OPTIONS APPROX. 6 WEEKS. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GLUING MACHINE, STORK, TYPE: ERT 630 Technical description: Bandwidht: 630 mm Material: Stainless steel Aisi 304 Power supply: 380/440 V - 50/60Hz Dimensions: 1500 x 1200 x 1800 mm

: neu : ca. 10 Wochen ab Auftrags : Türkei : 57100 € : 1079.19 € : 3200 mm : 2 mm : 1.2 mm : 3 mm : Motorisch : 4450 mm : 2200 mm : 1900 mm : 4500 kg : 1000 mm CNC control with tabular programming - 15,6", touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page Motorized drive (servo motors) of the upper and bending beam (Z and Y axes) Motorized back stop (X axis) with servo drive, 1000 mm, rectangular configuration, with ball rollers in ...

General SKU215X091 MakeOlsa TypeER3 Machine number70037 Year of construction1987 Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure trays3 Bar Main Features MaterialStainless steel Volume1000 Ltr. Surface5 m2 Specified Features - Tray dryer MaterialStainless steel 1.4301 (304) Tray dryercheck Stainless steel housingcheck Stainless steel trayscheck Heating surface5 m2 Drying chamber capacity1000 l Drying chamber sizes1050x1050x1000 mm Max. temperature130 deg C With jacketcheck Max. temperature130 Number of trays11 (24 sample plates) Tray sizes40x480x960 mm (sample plate) Distance between the trays65 mm Tray capacity15 l per sample plate With 1 doorcheck Connection for the vacuum pumpcheck Without vacuum pumpcheck Information Mounted on framecheck LocationBarneveld Floorspace1,5 x 1,5 m Total height2 m Weight1000 kg Extra Specificati ...

: neu : 2026 : 080200 : Mai 2026, Zwischenverkauf : Türkei : 5900 € : 113.87 € : 1250 mm : 1.25 mm : 0.8 mm : 2 mm : 150 ° : 500 mm : 200 mm : 1500 mm : 750 mm : 1715 mm : 315 kg : geteilt, 45° : Verstellbereich 35 mm Sectioned upper- lower- and bending tool, material 42CrMo4, hardened to 60HRC Manual back gauge Adjustable angle gauge Shelve and box for tools Machine on rolls with brakes Operating manual in German or English The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Italien : 29100 € : 555.81 € : 100 mm : 500 mm : 1200 mm : 850 mm : 480 kg : 43 cm³ : 100 x 6 mm : 3 1/2 x 4 mm : 100 x 6 mm : 100 x 3,6 mm : 100 x 3,6 mm : 114,3 x 6,3 mm : 114,3 x 6,3 mm : 114,4 x 6,3 mm : 88,9 x 3,65 mm : 100 x 5 mm : 70 mm : 100 x 25 stehend, 100 x 5 mm : 400 mm : 36 mm : 10 mm : 0 - 1,3 U/min : 3.5 kW quick-change tooling system digital display of bend material spring back compensation remote control of bend, return and emergency stop functions accurate counterbending die positioning footswitch 3 hexagonal tool holders heavy-duty steel gear case users manaul tools not included, prices on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Spanien : 7160 € : 138.19 € : 30 mm : MK 3 : 250 mm : 245 - 4000 U/min : M25 : 400 mm : 655 mm : 1185 mm : 280 kg : 120 mm : 100 mm : 85 - 635 mm : 1.195 mm : 300 x 270 mm : 600 x 380 mm ERLO(MADE IN SPAIN) FOR MANUFACTURING USE V-belt drive manual feed left-right drilling automatic tool ejector adjustable depth stop table with T-slots drill guard with micro switch lightening equipment user manual in English or GERMAN CE OPTIONS (PRICES ON REQUEST): Variable speed incl. digital display (VE+TAK) Tapping device (IR/RS) Coolant equipment incl. T-slots in the ground plate (ERB) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data: Speed (infinitely variable) 0-3.3300 rpm Basket load (max) 8 kg Equipment/accessories: Parts cleaning Denios washing trough Other accessories for various operating resources

: neu : EC0009 : 72 € : 1 for tubing diameter: 3/4 gas / 26,9 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2024 : 3984 : prompt, Zwischenverkauf v : Spanien : 10090 € : 193.73 € : 1 : 32 mm : MK 3 : 250 mm : 65 - 125 - 185 - 365 - 54 U/min : M24 : 665 mm : 640 mm : 2100 mm : 260 kg : Automatisch 0,10 - 0,20 - mm/U : 100 mm : 85 - 635 mm : 1.170 mm : 300 x 270 mm : 665 x 400 mm : 120 mm ERLO (MADE IN SPAIN) FOR DEMANDING WORKSHOP USE geardrive machine 3 aut. feeds left-right drilling table with t-slots depth adustable end tool ejector drill guard CE norms user manual in GERMAN Incl. following optional equipment: lighting equipment coolant equipment and machine base with T-slots (symbol photo) OPTION (PRICE ON REQUEST): reverse for tapping Time of delivery with options: approx. 8 weeks The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Wochen ab Auftragse : Italien : 9340 € : 180.26 € : 48 mm : 570 mm : 410 mm : 1000 mm : 110 kg : 6 cm³ : 48 x 3,5 mm : 11/2 x 3.68 mm : 54 x 1,5 mm : 50 x 4 mm : 48 x 2 mm : 48 x 2 mm : 60 x 3 mm : 64 x 2 mm : 64 x 2 mm : 60 x 2 mm : 50 x 4 mm : 32 mm : 45 x 16 stehend, 45 x 25 mm : 300 mm : 10 mm : 10 mm : 2/3 U/min : 1.5 kW 3 phase digital display of bend material spring back compensation quick-change tooling system 2 hexagonal tool holders accurate counterbending die positioning portable with base wheels footswitch users manual ALTERNATIVELY ALSO AVAILABLE AS FOLOWING MODEL (PRICE ON REQUEST): SB 48M (single phase, 2 r/min) Model with TCPlus control on request MACHINE-KIT WITH TOOLS (PRICES ON REQUEST): Art.Nr. maschine tube radius SB 48M K2D SB 48M Gas inch 2 x Ø SB 48T K2D SB 48T Gas inch 2 x Ø tools: Ø 1/2", (21,3 mm), R46 Ø 3/4", (26,9 mm), R56 Ø  ...

: neu : ca. 8 Wochen ab Auftragse : Spanien : 6840 € : 132.01 € : 25 mm : MK 3 : 250 mm : 245 - 4000 U/min : 0,7 / 1,3 kW : M18 : 400 mm : 655 mm : 1900 mm : 280 kg : 120 mm : 100 mm : 85 - 635 mm : 1.195 mm : 300 x 270 mm : 600 x 380 mm ERLO(MADE IN SPAIN) FOR MANUFACTURING USE V-belt drive manual feed left-right drilling tool ejector adjustable depth stop table with T-slots drill guard with micro switch lightening equipment user manual in English or GERMAN CE OPTIONS (PRICES ON REQUEST): Variable speed incl. digital display (VE+TAK) Tapping device (IR/RS) Coolant equipment incl. T-slots in the ground plate (ERB) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 106340 € : 2009.83 € : 150 mm : 1000 mm : 1900 mm : 1475 mm : 2700 kg : 170 cm³ : 150 x 7,1 mm : 6 x 7,11 mm : 150 x 9 mm : 141,3 x 6,55 mm : 141,3 x 6,55 mm : 168,3 x 9 mm : 168,3 x 9 mm : 64 x 6 mm : 88,9 x 3,65 mm : 110 mm : 150 x 45 stehend, 150 x 6 mm : 800 mm : 100 mm : 10 mm : 1 U/min : 15 kW TCPlus Control with 7 Touchscreen Programmable bending speed for each individual bend Possibility to bend left and right Users manaul The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : EC0006 : 468 € : 1 for tubing diameter: 2 gas / 60,3 mm R150: Hex50: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : EC0002 : 303 € : 1 for tubing diameter: 1 gas / 33,7 mm R82: Hex40: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2024 : 9721 : prompt, Zwischenverkauf v : Italien : 7780 € : 150.15 € : 1 : 1 : 42 mm : 400 mm : 570 mm : 1000 mm : 80 kg : 4 cm³ : 42 x 3 mm : 48 x 1,5 mm : 42 x 4 mm : 42 x 2 mm : 42 x 2 mm : 50 x 3 mm : 54 x 2 mm : 54 x 2 mm : 60 x 2 mm : 50 x 4 mm : 30 mm : 40x20 (liegend), 40x12 (s mm : 260 mm : 10 mm : 3,3 U/min : 1.1 kW manual clamping electronic preselection of bending angle digital read our for Clamping position 30 programms with each 9 bends material spring back compensation overload protection mobile by rolls and handle foot pedal tools not included Alternatively also available as following models (prices on request): MB 42M (single phase, 2 U/min) MB 42PM (portable, single phase, 2 U/min) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Spanien : 50410 € : 952.75 € : 35 mm : MK 4 : 390 mm : 94- 2.225 (16) 50 Hz 113 U/min : M35 : 1660 mm : 1510 mm : 2600 mm : 910 kg : 180 mm : 190 - 650 mm : 1310 mm : 125 mm : 400 x 420 mm : 0,10 - 0,18 - 0,24 (3) mm/min : 750 - 1.500 U/min ERLO (MADE IN SPAIN) FOR DEMANDING WORKSHOP USE drilling and milling machine automatic feed precision electromagnetic clutches geared drive cross table fixed base and displaceable headstock control panel cooling equipment with electric motor pump hand wheel for fine tuning clamping device for tools adjustable stop drill guard OPTIONAL EQUIPMENT (PRICES ON REQUEST): Digital read out for drilling depth Tapping device Motorized longitudinal and/or transverse feed Digital read out for table axes and/or drill head height adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oH ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 63900 € : 1207.71 € : 4200 mm : 1.5 mm : 1 mm : 2 mm : Motorisch : 5450 mm : 2200 mm : 1900 mm : 5350 kg : 1000 mm CNC control with tabular programming - 15,6", touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page Motorized drive (servo motors) of the upper and bending beam (Z and Y axes) Motorized back stop (X axis) with servo drive, 1000 mm, rectangular configuration, with ball rollers in ...

A medium- to low-voltage distribution transformer France Transfo is available. Power: 800kVA, upper voltage: 10000V, overvoltage: 12kV, impulse voltage: 75kV, winding test: 28kV, connection: D YN05, insulation class: A, rated current: 46.2A/1155A, short-circuit voltage: 6%, cooling type: ONAN, oil weight: 450kg, weight: 2100kg. Documentation available. An on-site inspection is possible.

: neu : 2025 : 080093 : prompt, Zwischenverkauf v : Türkei : 5530 € : 106.73 € : 1 : 1050 mm : 1.5 mm : 1 mm : 2.2 mm : 150 ° : 500 mm : 200 mm : 1300 mm : 750 mm : 1515 mm : 280 kg : Verstellbereich 35 mm Sectioned upper- lower- and bending tool, material 42CrMo4, hardened to 60HRC Manual back gauge Adjustable angle gauge Shelve and box for tools Machine on rolls with brakes Operating manual in German or English The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 3935 : ca. 10 Wochen ab Auftrags : Spanien : 18150 € : 348.48 € : 50 mm : MK 4 : 400 mm : 54 - 1032 (9) U/min : 2.9 kW : M36 : 600 mm : 1200 mm : 2500 mm : 710 kg : 0,1 / 0,2 / 0,3 / 0,4 mm/U : 230 mm : 200 mm : 50 - 850 mm : 1290 mm : 550 x 550 mm : 1060 x 600 mm ERLO(MADE IN SPAIN) FOR MANUFACTURING USE High quality gear drilling machine cooling equipment VDE electric chuck protection left right drilling lighting front handwheel for sensitive feed table turn and tiltable user manual in GERMAN OPTIONS (PRICES ON REQUEST): manual tapping systemIR/IRS electronic speed variator with digital read out VE+TAK digital read out for drilling depth LBC ALTERNATIVE: ERLO B-50 VERSION WITH ELECTROMAGNETIC CLUTCH PRICE ON REQUEST The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Spanien : 10930 € : 209.86 € : 35 mm : MK 4 : 300 mm : 132-194-277-319-466-666-8 U/min : 1.5 kW : M27 : 755 mm : 480 mm : 2205 mm : 385 kg : 125 mm : 90 - 890 mm : 1250 mm : 400 x 420 mm : 150 mm Manual feed Geared drive Hardened and ground high quality steel gears Speed plate and selecting levers on head front Depth scale and adjustable depth stop Thermomagnetic switch Emergency STOP push button Spindle reversing switch Worklight Fixed table Safety drill guard with microswitch CE mark OPTIONS (PRICES ON REQUEST): Electronic speed variator with speed digial reader (VE+TAK) A) 66-211 B) 97-310 C) 138-443 D) 160-510 E) 233-746 F) 333-1066 G) 440-1413 H) 648-2074 I) 926-2963 Depth digital reader(LBC) Manual tapping system (IR/RS) Manual tapping system for models with variator(IR/RS-VE) Rotating and tilting table(MGI) Coolant equipment with T-sl ...

: neu : 2024 : 3982 : prompt, Zwischenverkauf v : Spanien : 10830 € : 207.94 € : 1 : 35 mm : MK 4 : 300 mm : stufenlos 100 - 2.000 U/min : 3 kW : bis M 27 : 1100 mm : 600 mm : 1950 mm : 360 kg : 0,10 / 0,20 / 0,30 (3) mm/U : 150 mm : 125 mm : 90-890 mm : 1250 mm : 480 x 480 mm ERLO (MADE IN SPAIN) FOR DEMANDING WORKSHOP USE column drilling machine with vario gear 1-stage V-belt drive with stepless variable speed with a frequency converter and digital speed display 3 automatic feeds chuck guard left-right drilling T-Slots and integrated coolant equipment in base stand integrated lighting drill guard HEIGHT ADJUSTABLE, ROTATING AND TILTING TABLE WITH T-SLOTS reverse for tapping fast and precise setting and control of the speed without switching operations and without defined levels more particularly robust parts for wear resistant operation and smooth running compact design with high p ...

General SKU900WP052 LocationBarneveld MakeChemieanlagenbau Erfurt-Rudisleben ( D ) No.2.65662.00/2.7805 Pressure Working pressure1 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume315 Ltr. Motor0.55 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity315 Ltr. Dished bottomcheck Dished top sidecheck Top connectionscheck Outletcheck With jacketcheck Max. temperature 0/165°C With turbo stirrerplat blade open turbine Motor0,55kW, 230/400Volt, 1380rpm (EX) Stainless Steel Reactors MaterialStainless steel Information Year of construction1985Catalysts & fillersStainless Steel ReactorsSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsLubricants & oleoSolid pharmaceuticsDyes & pigmentsAPIMinerals & inorganicPlastic & polymersAgrochemicalsRubberOther chemicalFine chemicalsOintmentsGeneric medicinesPaints & coatingsChemiean ...

General SKU900WP053 LocationBarneveld MakeChemieanlagenbau Erfurt-Rudisleben ( D ) No.2.65662.00/2.7808 Pressure Working pressure1 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume315 Ltr. Motor0.55 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity315 Ltr. Dished bottomcheck Dished top sidecheck Top connectionscheck Outletcheck With jacketcheck Max. temperature 0/165°C With turbo stirrerplat blade open turbine Motor0,55kW, 230/400Volt, 1380rpm (EX) Stainless Steel Reactors MaterialStainless steel Information Year of construction1985Catalysts & fillersStainless Steel ReactorsSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsLubricants & oleoSolid pharmaceuticsDyes & pigmentsAPIMinerals & inorganicPlastic & polymersAgrochemicalsRubberOther chemicalFine chemicalsOintmentsGeneric medicinesPaints & coatingsChemiean ...

General SKU069C301 MakeErnst Haage Apparatebau GmbH Mülheim a/d Ruhr No.9312003 Year of construction1993 Mounted on legsMounted on wheels Pressure Working pressure70 Bar Working pressure jacket0 Bar Main Features MaterialStainless steel Volume5 Ltr. Motor0.12 KW Specified Features - Stainless Steel Reactor ReactorHigh pressure Capacity5 Ltr Vessel sizesdia. 140x350mm Dished bottomcheck Outletdia. 5mm With jacket(3 Ltr) Max. temperature100 Degr. C. With propellor stirrertype PDR 360 B-SS (mixing head is missing) Motor0,12 KW, 230/400 Volt (Ex) Speed mixing shaftvariable (frequency inverter) Stainless Steel Reactors MaterialStainless steel 1.4404 (316L) Information LocationBarneveld With switchgearcheck Floorspace0,8x0,9 M Total height2,0 M ATEX compatiblecheckCatalysts & fillersStainless Steel ReactorsSolventsDiscountDetergent & surf.Other pharmaceuticsCos ...

Bobst Cartonpack 4 with Case Erector, Year: 2022, Designation: Packer, Landtech Case Erector, Typ: C-2000-Tape, Year 2021�

: neu : ca. 6-8 Wochen ab Auftrag : Spanien : 8970 € : 173.12 € : 30 mm : MK 3 : 250 mm : 65 - 3.060 (8) U/min : 380 mm : 600 mm : 2060 mm : 260 kg : 100 mm : 170 - 660 mm : 1.216 mm : 300 x 270 mm : 600 x 380 mm ERLO(MADE IN SPAIN) FOR MANUFACTURING USE High quality geardrive machine 2 automatical feed Left-right drilling Automatic tool ejector Adjustable depth stop Table with T-slots Drill guard with micro switch Lightening equipment User manual in English or GERMAN CE OPTIONS (PRICES ON REQUEST): coolant equipment with T-slots in base plate ERB Reverse for tapping IR/RS The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 35000 € : 668.5 € : 2550 mm : 1.5 mm : 1 mm : 2 mm : Motorisch : 155 ° : 110 mm : 3800 mm : 2100 mm : 1650 mm : 2500 kg : 750 mm : 300 mm/s : 0.1 +/- mm : 0-20 mm : 100 °/sek : 90 mm/s CNC CONTROL WITH TABULAR PROGRAMMING - 15,6", touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page BACK GAUGE 750 MM with servo drive, pull back sliders to create space for down flanges at the back of the b ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 53600 € : 1013.04 € : 2050 mm : 3 mm : 2 mm : 4 mm : Motorisch : 3350 mm : 2200 mm : 1900 mm : 3800 kg : 1000 mm CNC control with tabular programming - 15,6", touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page Motorized drive (servo motors) of the upper and bending beam (Z and Y axes) Motorized back stop (X axis) with servo drive, 1000 mm, rectangular configuration, with ball rollers in t ...

: neu : ca. 8 Wochen ab Auftragse : Spanien : 12570 € : 241.34 € : 50 mm : MK 4 : 350 mm : 93 - 152 - 204 - 298 - 44 U/min : 3 kW : M35 : 480 mm : 755 mm : 2265 mm : 435 kg : 0,1 / 0,18 / 0,24 mm/U : 180 mm : 150 mm ERLO (MADE IN SPAIN) FOR DEMANDING WORKSHOP USE Gear drive 3 aut. feeds sliding machine table solid drill head tiltable turntable front wheel for sensitive fine feed (sample photo) OPTIONS (PRICES ON REQUEST): lighting equipment L coolant equipment and machine base with T-slots ERB Reverse for tapping IR/RS The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working width:1400 mm Workpiece thickness max.: 80 mm work height max.:1000 mm Feed speed:4m/min I Stufe, 8 II Stuf m/min. Required air-pressure:max. 5 bar voltage:50 Hz, 380 V workpiece length:320 mm workpiece thickness min.:1 mm weight of the machine ca.:3500 kg Documents:vorhanden

working width:880 mm workpiece height:1- 70 mm work height max.:1000 mm Feed speed:4- 8 m/min. voltage:50 Hz, 400 V weight of the machine ca.:2.800 kg dimensions of the machine ca.:2500 x 1715 x1675 mm width:min. 350 mm Sanding cylinder diameter:420 mm electr. connected load:20 KW Required air-pressure:1 x R3/ 8 " pressure:5 bar tank:des Bandfilter ca.200 l automatic magnetic filter unit:vorhanden grinding tools:1540 x 900 mm accessories::9 Bänder Documents:vorhanden

Article: turning lathe Manufacturer: Ergomat Type: TBA-42 Yob: 20006 The machine was powered exclusively by oil (no emulsion) and was used only for machining brass The turret is currently not operational. A sensor likely needs to be replaced Includes IEMCA loading magazine BOSS 545 E, Type 32 N Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

pressure:250 t throat:450 mm stroke:36 - 126 mm no. of strokes:40 /min distance table/ram, max. stroke up, adjustment up:525 mm table surface area:1000 x 750 mm hole in the table:400 x 360 mm table height over floor:1000 mm ram surface:600 x 500 mm ram adjustment:111 mm power requirement:19,0 kW weight:13,5 t Dimensions (WxDxH):1,3 x 3,2 x 3,35 m clutch:pneumatic overload protection in ram:mechanical ram adjustment:motoric

Cylindro-conical fermentation tank made of austenitic steel., Additional title: vertical, coolable stainless steel tank, Capacity: 6300 l, Max. overpressure: 1 bar, Temperature range: 50 °C, Length: 1700 mm, Height: 4359 mm, Material: stainless steel 1.4571, 1.4404, 1.4301, Position: standing, vertical, Base construction: feet, Features: 2 x jacket cooling, 1 x cone cooling

new foil wrapping machine brand: ERREGI type: Compact 250 line consisting of 2 parts: wrapping machine and shrinking tunnel, with infeed and outfeed elements With automatic selection of 3 or more foil widths. wrapping machine: length of welding bar: 2.500 mm number of reel pairs top: 3 max. width of top reels: 2.450 mm number of reel pairs bottom: 3 max. with of bottom reels: 1.450 mm width of conveyor belts: 1.300 mm length of exit belt: 2.400 mm length of infeed belt: 3.500 to 2.200 mm (telescopic) working height (conveyor): 800 mm opening height (max. workpiece height): 700 mm min. workpiece weight: 5 kg shrinking tunnel: installed power: 54 kW average hourly consumption: 35 kWh length of shrinking area: 2.700 mm total length of tunnel: 3.700 mm width of conveyor: 1.500 mm working height (conveyor): 800 mm opening height (max. wor ...

Throughfeed case clamp Make: ERREGI Type: Tecnopress VR2/2 New machine Fast - Silent - Clean - Lean - Universal - Service by Wehrmann Technical data:  Self-positioning thru-feed carcase press The load bearing structure of the machine consists of a double portal in welded tubular steel, inside of which the two mobile heads and the presser table run. -The presser table and the mobile head are driven by motors. - Each of the mobile head and fixed is fitted with three horizontal pressure beams with programmable positioning moved vertically by an electro mechanical system. - The belt system is positioned on either side of the machine to allow the carcase to be clamped equally well, whether is his depth. -The carcase transfer system is located at the bottom of the bed and consists of an electro-welded steel structure on which a closed loop belt r ...

sheet width: 1020 mm plate thickness: 2.5 mm : 45.0 mm bending angle max.: 0 - 135 ° weight of the machine ca.: 285 kg range L-W-H: 1175 x 850 x 1175 mm Description: Swivel bending machine with patented hydraulic auxiliary cylinder and Remote control. The machine is both manual (for thinner sheets) and motorized (for thick sheets) operated. The motorized function is over a remote control operated with an emergency stop. Version S - with segmented upper beam for boxes and special profiles - Max. Bending angle 135 ° - Max. Opening upper beam 45 mm - The HS Ergo is a further developed machine that uses a patient hydraulic auxiliary cylinder is supported - The machine is both manual (for thinner sheets) and motorized (for thick sheets) operated. - the motorized function is operated via a remote control with emergency stop The data for this ad was created with ModulMWS - the software so ...

: neu : ca. 8 Wochen ab Auftragse : Spanien : 11530 € : 221.38 € : 40 mm : MK 4 : 300 mm : 75 - 150 - 235 - 325 - 47 U/min : 1.3 kW : Stahl: M 30, Guss: M 32 : 600 mm : 640 mm : 2020 mm : 305 kg : 0,1 — 0,2 — 0,3 mm/U : 160 mm : 125 mm : 420 x 400 mm ERLO (MADE IN SPAIN) FOR DEMANDING WORKSHOP USE geardrive machine 2 aut. feeds left-right drilling drill guard CE norms user manual in GERMAN OPTIONS (PRICES ON REQUEST): lighting equipment coolant equipment and machine base with T-slots Reverse for Tapping The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 36800 € : 702.88 € : 3200 mm : 1 mm : 0.6 mm : 15 mm : Motorisch : 155 ° : 110 mm : 4500 mm : 2100 mm : 1650 mm : 2900 kg : 750 mm : 300 mm/s : 0.1 +/- mm : 20 mm : 100 °/sek : 90 mm/s CNC CONTROL WITH TABULAR PROGRAMMING - 15,6", touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page BACK GAUGE 750 MMwith servo drive, pull back sliders to create space for down flanges at the back of the bo ...

Erweka VDT/S Packaging Leak Tester Blister Density Tester Untested from Laboratory Closure Auction-ID: A7-45427-9

CAP.: 25 CARTONS/MIN., 300-395 x 227-300 x 250-273 MM - L x W x H, 8 KW