equipment used for sale

Chemical pre-treatment for powder coating (3 zones) 1 Dimensions of the cabin length 3900 mm Width 1600 mm Height 2500 mm 2 dimensions of the pre-treatment complete length 4000 mm Width 3000 mm Height 4000 mm 3 Passage opening width 1000 mm Height 1700 mm The chemical pretreatment for the use of nanotechnology or phosphating consists of 3 stages in 1 spray chamber. Chemical spray pretreatment works in time and this means that the workpieces are manually pushed into the chamber. After closing the doors, the passage starts and the pumps start spraying. Each pump has different spray times. After the spraying process is finished, there is an alarm indicating that the door can be opened and the workpiece can be pulled out. All pre-treatment functions a ...

Oven, doors single-sided, electric Dimensions: 3,000 x 1,700 x 2,000 [mm] (alternatively width 1900mm instead of 1700mm) Insulation: 150 mm (mineral wool 75 kg/m³) Temperature: max. 220°C Circulating air: Q = 7500 m³/h P = 3 kW Heat output: 46 kW Auxiliary heating: electrically indirect via thermoblock

The curing furnace consists of a tunnel furnace in which the workpieces are baked after coating. The furnace is a straight tunnel furnace. The frame is made of steel with insulated panels. The mineral wool insulation becomes 150 mm thick in a special construction to prevent thermal bridges 1 Inner dimension length 7,000 mm Inner dimensions width 1,000 mm Inner dimensions height 2,500 mm 2 Outer dimensions incl. thermoblock, length 7,200 mm Outer dimensions incl. thermoblock, width 1,300/2,300 mm External dimensions incl. thermoblock, height 2,800 mm 3 substructure 1 set of steel profiles 80 x 80 and 40 x 80 mm 4 walls 1 set of double-sided galvanized sheets 1mm, outside RAL 5010 5 Insulation 1 set of rock wool 150mm 75 Kg/m³ 6 Ventilation system 1 set of galvanized steel sheet 7 Temperature max. 220°C 8 fans 1 pc. 7,500 m³/h 9 electric motors 1 pc  ...

Oven, doors single-sided, electric Dimensions: 3,000 x 1,700 x 2,000 [mm] (alternatively width 1900mm instead of 1700mm) Insulation: 150 mm (mineral wool 75 kg/m³) Temperature: max. 220°C Circulating air: Q = 7500 m³/h P = 3 kW Heat output: 46 kW Auxiliary heating: electrically indirect via thermoblock

Siebler Stick Pack packaging machine with counter for counting and packing of micro tablets, 1 lane (more lanes available on request), capacity up to 30 sticks per minute. New machine

Open Powder Spray Stand Dimensions: 2500 x 2250 x 2700 [mm] Extraction capacity: Q = 8000 m³/h P = 5.5 kW Filter: 1 stage: Filter cartridges 4 pieces à Ø 325 x 1000 [mm] 2nd stage: Pocket filter (absolute filter for fine dust) Note: The overspray during powdering is absorbed by the suction unit. The powder spray stand is delivered on rollers and is therefore mobile

Dimensions: Length: 8000 mm Width: 4500 mm Height: 3500 mm Extraction capacity: Q = 18000 m³ P = 15 kW The cab has 2 doors on one side for the insertion/outlet of the workpieces. The components are pushed into the cabin for coating via the overhead transport system. Walls, ceiling and doors are made of panels. The filters positioned on the roof absorb dust and other particles from the outside, thus ensuring clean ambient air in the cabin. The overspray during powdering in the cabin is absorbed by the extraction unit

CTP-Mitsubishi - DPX 460 – Platesetter with Rip-Mate PC Year of construction: approx. 2007 incl. software and accessories incl. roll films in their original packaging For the production of ready-to-print die-cut polyester printing plates Mitsubishi SILVER DIGIPLATE Suitable for the following printing presses: For Heidelberg QM 46, GTO 46, GTO 52 For Ryobi 5xx For Roland Edelmann Practica 400x510mm For Heidelberg Speedmaster SM 52 – PM 52 2x Supply Rolls 1x integrated register punch for PM52- SM52- Autoplate

Ultimate sealing flexibility with dual impression

ADIGE BLM LT652 Model : LT652/B Year of Manufacture : 2002 Laser Generator: DC025 (2500 Watts) Loading Length : 6500 Drain Length : 4500 Hours of Electrical Panel : 60433 Tension Laser Ore : 62285 Chiller : recently replaced Disassembly options - available now.

Salvagnini Mod. Performer Year 2000 Manual loading Manual blades

Coupon holder; suitable for Vacuumatic Vicount 3 machines. Coupon holder; used for Vacuumatic Vicount 3 machines.

Brand: Rollepaal Pipe Extrusion Technology B.V. Model: RSV 8/1 Year of construction: 2005 Pipe outer diameter max: 8 mm Cooling length: 1000 mm Spray pump: 2.2 kW

Paper counting machine Vacuumatic Vicount 3 PB; serviced and inspected by Vacuumatic Customer Service; compressor overhauled; Air table 76x144cm; Touchscreen; Max. Counting speed 2500 rpm; Max. Stacking height 220mm; Paper weight 25-240g/m2; strip bullet hole; low meter reading 1.7 million Paper counter Vacuumatic Vicount 3 PB; checked and tested by the support of Vacuumatic; compressor rebuilt; air table 76x144cm; touchscreen; max.counting speed 2500 rpm; max.pile hight 220mm; paper weight range 25-240g/m2; tape insert; low counter 1.7 million

Screw packers for valve bags Stainless steel Suitable for food and pet food Revised and Function Tested Incl. net scale and new B+L weighing electronics Suitable for valve bags from 10.0 kg - 50.0 kg

Machine type: MIG/MAG welding machine Make ESAB Type LAN 400 Connection voltage 3 x 400 volts Adjustment range 45 – 400 amps Duty cycle 60% ED at 400 amps 80% ED at 355 amps 100% ED at 315 amps Current setting 40 switching levels 3 chokes for the ground cable Cooling transformer by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Wire feeder 4-roller drive Fuse 20 Ampere Dimensions L x W x H 900 x 700 x 990 mm Weight 192 kg Age approx. 15 years Condition workshop tested, good, incl. UVV test report Scope of supply welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 1 piece pressure reducer 1 Piece Instruction Manual Warranty: 6 months from the date of delivery List factory price from stock €6,900.00 + VAT Pr ...

BRABENDER Moisture Analyzer Semi-Automatic HA includes setting thermometer and 10 sample dishes overhauled and adjusted by our laboratory specialist partner Control thermometer and weight set new Sekutest DGUV V3 newly calibrated

Shaft test device, concentricity tester PAGUS Span: max 460 mm Center height: 72 mm with quick-release device ! used ! Dimensions: 700 x 390 x 255 mm

Offer 24367 Specifications: - Orbital welding machine AXXAIR SALS 150 ( AIR LIQUIDE Prestotig 180 ) - Cooling unit ACW 015 ( SAF Prestocool ) - Circumferential seam welding device AXXAIR CC 220 with motorized concentricity - Raw cutting machine AXXAIR CC 80 -Trolley - Table height 830 mm - Connection 220 V - Space requirement approx. W 1400 x H 1450 x D 1000 mm - Weight approx. 150 kg

Machine type: MIG/MAG welding machine Make MERKLE Type RedMIG 3000 K Appendix No. 132.175 Connection voltage 3 x 400 volts Adjustment range 25 – 280 amps Duty cycle 35% ED at 280 amps 60% ED at 240 amps Current setting 14 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder 4-roller drive DV 26 Fuse 16 Ampere Dimensions L x W x H 940 x 445 x 760 mm Weight 120 kg Age 3 years Condition workshop tested, very good, incl. UVV test report Scope of supply welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer 1 roll of welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece spare parts box, complete Equipped 1 pair of welding gloves 1 Piece Instruction Manual Warranty 24 months from ...

Sourdough mixer Kitzinger Sourmat 300 - Stainless steel sourdough stirrer - Kitzinger - Type: Sourmat 300 - 400 volts - with drain tap - on castors - Shell inner diameter: 72.5cm - Shell height inside: 64.5cm

UNOTECH package press from 2018 with approx. 13 - 14,000 Bh. and a sufficient package of wearing parts. the baling press is designed for baling of metal cans and metal blanks Find more here - /

Sourdough - Fast - Fermenter Model: Hema BRSSF 100 with external LED control approx. 20 - 100 kg total rye flour for approx. 60 kg sourdough with timer Stainless steel version, mobile Agitator removable at the bottom Connection 400V, 1.5 kW, 16A-CEE plug Dimensions: 640 x 700 x 1250 mm Used machine cleaned 3 months warranty + spare parts service Option: Maintenance contract Service Package Instruction & Commissioning You will find a large selection of bakery equipment with us!

used very little (max 4000 hours) and are in excellent condition. ORC turbine of 160 kW electrical and about 700 kW thermal, Since 2001, Triogen has been developing and manufacturing systems for conversion Organic Rankine Cycle (ORC) energy conversion systems. The generator TRIOGEN ORC, which has been used in various application areas since since 2005, is similar to a steam cycle, but uses a fluid organic instead of water. Compared with steam, it allows to achieve better performance and efficiencies by exploiting sources of low-temperature heat. The Triogen ORC generator is suitable for the conversion of heat from: + Natural gas engines + Biogas engines + Landfill gas engines + Biomass + Biodiesel engines + Diesel engines + Gas from flares + Gas turbines + Process heat + Furnace heat + Any heat source >350 °C 165 kWe DI ELECTRICITY WITHOUT FUEL AND EMISSION-FREE  ...

NEW- Unused Beckman Coulter Automate 1250, a high-performance liquid handling system that is designed to meet your laboratory´s needs for precision, accuracy, and flexibility. The Beckman Coulter Automate 1250 is a fully automated liquid handling system that can handle a wide range of volumes, from nanoliters to milliliters, with unparalleled accuracy and precision. It is equipped with a variety of features that make it easy to use and highly reliable, including a touch screen interface, integrated bar code reader, and automated tip loading and unloading. With the Beckman Coulter Automate 1250, you can streamline your laboratory workflow and increase productivity. It is ideal for a wide range of applications, including sample preparation, assay development, and high-throughput screening. Its flexibility allows you to perform a variety of assays, including ELISAs, PCR, and cell-based  ...

Steam Turbine 1 and major components Plant part Manufacturer Year of construction techn. data turbine VEB EKM 1970 generator VEB EKM; VEB Bergmann Borsig 1970 31250 kVA x 6,3 kV condenser VEB EKM 1970 "Bearing oil plant, pumps, "VEB Apparatebau Leisnig-Tragnitz; Filter Cooler" VEM, Siemens, VEB EKM and KSB" 1969 Steam jet cleaner Wilhelm Wigand ca. 1970 Condensate pumps VEB EKM ca. 1970 Find more here - / Contact us at -

BD FACS Aria Fusion Systems BD FACSAriaTM Fusion Measuring Stand, Type 2 Laser 5-3 with the equipment: Safety workbench 1 BD FACSAriaTM workstation incl. BD FACSDivaTM software 1 Norton GhostTM license for data backup 1 USBII HardDisk 500 GB 1 19" LCD flat panel display 2 Xerox 8570N Colorcube Solid Ink Printer 1 BD FACSAriaTM III Basic System (IC No. 53216) o Maximum optical sensitivity due to: - Gel-coupled cuvette optics. - Maximum light yield due to complete reflection optics with patented octagon detection blocks - Simplest handling due to advanced technology:  completely alignment-free optics on excitation and emission side  Easy Nozzle change with integrated O-rings without influence on optical alignment (each 1 Nozzle 70 μm, 85 μm, 100 μm included)  Exact fully automatic adjustment of the drop delay with live control by BD AccuDropTM  Automatic s ...

Newport Optical table Bravo, very good condition Find more here - / Contact us at -

Cleaning system, for ceramic flexo and ceramic flexo sleeves. Plastic media or sodium bicarbonate is sprayed at low pressure onto the the cylinder. This media is then recycled continuously about 8 times, depending granulometry. The machine consists of a cleaning and a cyclone/filtration filtration" section. Second-hand machine. Power supply: 230V 50/60Hz 3kW Compressed air: 5 bars Media consumption : 0.5kg/hour Find more here - / Contact us at -

2012 Horiba Fluorolog FL3 - 22 Modular spectral fluorometer, very good condition, barely used. Was last serviced in 2022, but is currently in storage Features: - FL3-22 inklusiv Fluoressence Software - FL1048-FUP Peltier cooling chamber - FL1001 Front Face Option - ZK36000120SL Fixed probe holder for front-face measurements with fine adjustment - FL1044 Automatic polarization unit - FL1011 Automatic quadruple cuvette holder - FL1014 Control unit for aut. cell changer - AC200- A25 Temperature control unit - Transmission and absorption unit - DM303 Amplifier - COM-FL Computer control system Find more here - / Contact us at -

Illumina MISeq, good condition New-generation sequencer / for DNA Find more here - / Contact us at -

10X Genomics GCG-SR-1 The Chromium Controller is in very good condition Find more here - / Contact us at -

Anton Paar ProveTec GmbH Penetrometer Type: PNR 12 Year of construction: 2022 Find more here - / Contact us at -

Agilent Technologies Bravo G5522A NGS Workstation 1.1 NGS Benchtop Integrated WorkStation -Integration of plate management and liquid handling devices into a benchtop automation system. - VWorks Benchtop License: Included - VWorks Simulation License: Included Robot Disable Hub: included 1.2 Bravo Liquid Handler integrated to BenchCel with - 5 Standard Pads 2 CPAC Ultraflat heated/cooled Pad 1 Bravo Orbital Shaker - 1 Bravo Thermal Pad · Magnetic Bead Pad - PCR Plate Support 96 Well · CPAC PCR Plate Insert -Deck risers for Bravo -Thermocube Chiller 400W for Bravo Thermal Pad -Controller for CPAC Pad 1.3 Bravo Gripper Upgrade 1.4 96LT Disposable Tip Head 1.5 BenchCel 4Racks Microplate Handler - With 4 Front Loading Racks - BenchCel Risers 1.6 Labware MiniHub - Integrated with BenchCel Find more here - / Contact us at -

Description: Eagle Systems CFM 106-20K Eco-Eagle Foil Module Consisting of: 1. Bi-directional differential shaft (x2) 2. Automatic pneumatic connection 3. SS Dual hardened helical gears both shafts 4. Quick release rubber module spreader rollers 5. Lower in-feed roller assembly for proper foil path 6. Heavy duty linear thrust bearings 7. Precise air transducers 8. Air pressure control sensor 9. PID closed loop air system control 10. Eco-Power” Minimal power servo motor control 11. Closed loop sensors for foil speed control 12. Fail safe closed loop sensors for multi foil roll control 13. Foil position encoder 14. Fail safe wiring system 15. Solid state relays 16. Mode indication by lights 17. Fully automatic control 18. Fail safe press guarding 19. Full Module guarding 20. Foil shaft lifting beam 21. All electrical and pneumatic controls contained within the modu ...

Aerosol Jet Printer Model - AJ300CE The Optomec AJ300CE Aerosol Jet Printer, introduced around 2011, is an additive manufacturing system designed for high-resolution, non-contact printing of electronic and biological materials onto various substrates, including non-planar surfaces. It utilizes Aerosol Jet technology to deposit fine-feature patterns with feature sizes as small as 10 micrometers. Key Features: - High Precision Printing: Capable of producing feature sizes down to 10 µm, enabling the creation of intricate patterns necessary for advanced electronic components. - Versatile Material Compatibility: Supports a wide range of materials, including conductive, resistive, and dielectric inks, with viscosities ranging from 1 to 1000 cP. - Non-Contact, Conformal Printing: The non-contact deposition process allows for printing on complex, three-dimensional surfaces without damagin ...

This Press laminating machine is the perfect solution for automotive, aerospace, and various manufacturing applications. Built before 2015, it offers exceptional precision and durability .Designed to handle large and complex laminating projects efficiently, this machine is ideal for businesses seeking to improve quality and productivity. We have three machines from different years ( two dated before 2015 and one from 2018). Machine details : Dimensions (L x W x H): 3600 mm x 2850 mm x 4530 mm Table Size: 1600 mm x 900 mm Weight: - Overall: 4300 kg - Lower part: 4900 kg - Upper part: 4300 kg Find more here - / Contact us at -

Model Type/Number: 091 / 93 Modification/Year of Construction: November 1998 Electrical Connection: 400V, 4.5 kW, 50 Hz Heating Voltage: 230V AC Control Voltage: 230V AC / 24V DC Compressed Air Requirement: 6 bar / L/min Find more here - / Contact us at -

The Pfeiffer HiCube 80 Eco is a compact, modular turbo pumping station designed for high and ultra-high vacuum applications. Introduced around 2010, it combines a turbomolecular pump with a backing pump, offering a plug-and-play solution for various vacuum processes. Key Features: - Modular Design: Allows for flexible combinations of different turbopumps and backing pumps to suit specific application requirements. - Compact and Versatile: Its compact size makes it suitable for laboratory settings and industrial applications where space is limited. - Energy Efficiency: Features an intermittent mode that adapts the pumping station to process conditions, potentially saving up to 90% energy. Specifications: - Turbopump: Equipped with a HiPace 80 turbopump, offering high performance and reliability. - Backing Pump: Typically paired with an MVP 015-2 diaphragm pump, providing effective  ...

Digestate Dryer - RHS Rhino Agitator Dryer - Manufacturer: RHS - Model: MCT10 - Year of Manufacture: 2018 - Power Output: 33 kW - Operating Voltage: 3-phase, 400V, 50 Hz - Control Voltage: 24V DC - Power Factor: ~0.8 (capacitive) - Frequency: 50Hz - Fuse: minimum 100A - Equipped with: Underbody cleaning on one unit, control cabinets, stainless steel feed screws, heat exchanger, heating water pump, supply air fans - Quantity: 3 units - Operating hours: approx. 7000 hours - Variants: One machine equipped with underbody cleaning Functionality The RHS Rhino Dryer is engineered for the drying and hygienization of fermentation residues (digestate) and slurry. It supports efficient moisture reduction, stabilizing the material and reducing odor. The feed system utilizes DN 150 pipelines with an eccentric screw pump, and the dried material is discharged through stainless steel feed screws for  ...

Machine Details: - Type: REH 500 eco - Year of Manufacture: 2017 - Quantity: 4 units - Power Output: 500 kW - Fuel: Fermentation residues (Gärreste) - Maximum Operating Pressure: 2.5 bar - Maximum Operating Temperature: 105°C - Water Capacity: 3200 liters - Electrical Connection: 400V, 63A - Application: Combustion of fermentation residues; other fuels may be possible - Accessories: Chimney, ash discharge, dust silo, and filter Brief Description: Rotary kilns designed for the combustion of dried fermentation residues. Find more here - / Contact us at -

The Sycon Thin Film Rate / Thickness Transducer is a used piece of laboratory equipment designed for measuring film deposition rates and thicknesses accurately. This transducer is vital in environments where precise and reliable film measurements are important, ensuring efficient and consistent results in laboratory settings. Manufactured by Sycon, this transducer showcases robust performance in various industrial and research applications. It is engineered for ease of integration within existing systems and provides high-precision data crucial for maintaining quality in film applications. While specific technical specifications are not provided, the design and functionality align with the demanding standards expected in laboratory equipment. ucymachines

Manufacturer: KUKA Year of Manufacture: 2006 Model: KR 100 comp Type of Machine : Industrial Robot Find more here - / Contact us at -

Offer 24589 Specifications: - Suitable for welding steel, aluminum special metals, Cr Ni, etc. - Welding current 450 A 60% ED - 360 A 100% ED - Welding current adjustable from 3 A - 450 A - Synergic setting control FRONIUS - FRONIUS water cooling unit - Separate wire feeder case - Intermediate package device – wire feeder case 14 m - 4 rolls of wire feeder infinitely adjustable - MIG - MAG Hosepack water-cooled approx. 4 m - Ground cable -Reducer - Mobile undercarriage - Connection 400 V / 6.6 A / 8.7 kVA - Space requirement approx. W 650 x H 900 + 450 x D 1100 mm - Weight approx. 200 kg

Offer 24600 Specifications: - Suitable for welding steel, aluminum special metals, Cr Ni, etc. - Welding current 450 A 60% ED - 360 A 100% ED - Welding current adjustable from 3 A - 450 A - Synergic setting control FRONIUS - FRONIUS water cooling unit - Separate wire feeder case - Intermediate package device – wire feeder case 14 m - 4 rolls of wire feeder infinitely adjustable - MIG - MAG Hosepack water-cooled approx. 4 m - Ground cable -Reducer - Mobile undercarriage - Connection 400 V / 6.6 A / 8.7 kVA - Space requirement approx. W 650 x H 900 + 450 x D 1100 mm - Weight approx. 200 kg

Offer 24603 Specifications: - Suitable for welding steel, aluminum special metals, Cr Ni, etc. - Welding current 450 A 60% ED - 360 A 100% ED - Welding current adjustable from 3 A - 450 A - Synergic setting control FRONIUS - FRONIUS water cooling unit - Separate wire feeder case - Intermediate package device – wire feeder case 10 m - 4 rolls of wire feeder infinitely adjustable - MIG - MAG Hosepack water-cooled approx. 4 m - Ground cable -Reducer - Mobile undercarriage - Connection 400 V / 6.6 A / 8.7 kVA - Space requirement approx. W 650 x H 900 + 450 x D 1100 mm - Weight approx. 200 kg

Offer 24604 Specifications: - Suitable for welding steel, aluminum special metals, Cr Ni, etc. - Welding current 450 A 60% ED - 360 A 100% ED - Welding current adjustable from 3 A - 450 A - Synergic setting control FRONIUS - FRONIUS water cooling unit - Separate wire feeder case - Intermediate package device – wire feeder case 1 m - 4 rolls of wire feeder infinitely adjustable - MIG - MAG Hosepack water-cooled approx. 4 m - Ground cable -Reducer - Mobile undercarriage - Connection 400 V / 6.6 A / 8.7 kVA - Space requirement approx. W 650 x H 900 + 450 x D 1100 mm - Weight approx. 200 kg

Manufacturer: NORDBERG Model: HP 100SX Year of Manufacture: 1996 E-engine: 90 kW Weight: ca. 5.500 kg Capacity: ca. 80 to/h - 0/22 Find more here - / Contact us at -

Machine Type: MIG/MAG Inverter Welding Machine Make Merkle Type MobiMIG 180 K Serial No. 89.754 Connection voltage 1 x 230 Volt Adjustment range 25 – 180 amps Duty cycle 20% ED at 180 amps 60% ED at 110 amps Current adjustment infinitely variable Cooling inverter through built-in fan Cooling burner gas-cooled Portable assembly system design Wire Feeder 2-Roller Gearbox Fuse 16 Ampere Dimensions L x W x H 450 x 210 x 480 mm Special Accessories ColdMIG Welding Process E-welding, MIG soldering, cored wire welding Weight 17 kg Age 12 years Condition workshop tested, very good incl. UVV workshop test report Scope of supply welding system with the following accessories: 1 piece of welding torch SBT 157 G, 3 mtr. long 1 piece ground cable 1 piece pressure reducer 1 roll of welding wire D-200 coil, 5 kg 1 can of non-stick sp ...

available is a complete Plant with Equipment to produce Airspring! 3 Roll Calender with line and 84" Twin Mill Bias Cutter Several Building machine several hydraulic Curing presses testing machine 3 x assembly lines Winder ...