equipment used for sale

Modular labeling machine 14 heads cold glue adhesive 8000 14 000 BPH This New modular labeling machine can be customized as needed Suitable for applying labels COLD GLUE AND ADHESIVES GLUE collar GLUE back U or L seal ADHESIVE front ADHESIVE back Bottles Containers CYLINDRICAL and SHAPED No labeling stations No 3 COLD GLUE groups N 2 adhesive groups 60 meters ON THE MODULAR TRAY Head diameter 960 mm Plates number 14 Min max label length 10 150 Min max label height 15 200 Container diameter height min max 30 80 mm Height 100 400 mm Max required speed 8 000 bph Basic machine composition 1 System built according to CE regulations 2 Machine operation via PLC Schneider 3 Touch screen control panel for labeler functions installed on a mobile and rotating support 4 Automatic variation of production speed with inverters and detection sensors installed on the conveyor belts 5 Light column indicat ...

Description:  ,DESCRIPTION OF THE EQUIPMENT  , The 'SUPER LINE NEW GENERATION' type vacuum forming equipment is suitable for the automatic processing of thermal annealing sheets up to 8mm thickness. Specifically, they are suitable for the production of inner chambers for domestic refrigerators with the use of a few operators. The tools used are designed for positive forming. The automatic operation of the machine requires the manual selector switches to be set in the correct position. The machine is fitted with the following equipment: - Electrical equipment for the control of the manual and automatic operation of the machine, SIMATIC S7-300 'Siemens' PLC and ET200B peripheral modules for the physical operation of the machine and a 'Comi' PLC for the control of the heating panels, using a computer for data input. - Hydraulic unit with 9 Tons of pressure (lower, tool tabl ...

Cat.-Nr. 11-3200 new Necessary space for mash and lauter tun: LxWxH: 3 x 2 x 2,80 m Necessary space for tanks: LxWxH: 4,0 x 5,0 m complete 2 brews / day = 10hl Basic Equipment The Brew House is complete with all equipment. All equipment are with high standard an very simple to use. This 5 hl Brew House is built as 2 devices-brew house manual version with manual butterfly valve. It is possible to make 2 brews/day (10 hl) Technology All the pipes can be cleaned and sterilized in the circuit over the pump included. a) In the mash boiler the mash will be cooked, then it will be pumped with one beer pump made of stainless steel from mash boiler to the lauter tun. b) After the lauter wort will be pumped back to the mash boiler. c) After emptying the lauter tun the grit floor will be removed. The lauter tun will be changed to a whirlpool. d) After cooking th ...

Cat.-Nr. 11-3210 new Basic Equipment The Brew House is complete with all equipment. All equipment are with high standard an very simple to use. This 10 hl Brew House is built as 2 devices-brew house manual version with manual butterfly valve. It is possible to make 2 brews/day (40 hl) Technology All the pipes can be cleaned and sterilized in the circuit over the pump included. a) In the mash boiler the mash will be cooked, then it will be pumped with one beer pump made of stainless steel from mash boiler to the lauter tun. b) After the lauter wort will be pumped back to the mash boiler. c) After emptying the lauter tun the grit floor will be removed. The lauter tun will be changed to a whirlpool. d) After cooking the hops a special injection valve is introduced inside the lauter tun so that it can be used as a whirlpool. Mashing Tun / Wort Boiler Volume brutto: ...

Max. testing force 10 kN, actual WINDOWS software (free programmable testing procedure) more than 600 ready prepared testing results - demo machine for special price The machine state is as new. Price of machine is without clamping heads (shown on the photo) because this equipment will be delivered as option according to your requirements. Price includes: - Machine 100 % functional - incl. load cell 10 kN (quality class 0.5 from 100 - 10000 N) - warranty 24 month - software Graphwork 6 (actual) - without clamping heads (as option) - without costs for delivery (depending on distance) - incl. setup, training Optional: - clamping heads - bending support - compression plates - extensometer - climatic chamber Even everything for to perform standard test procedures or according to you company requirements up to high performance testing equipment like MICRON LASER SPECKLE (optical Laser Speckle ...

Max. testing force 5 kN, actual WINDOWS software (free programmable testing procedure) more than 600 ready prepared testing results - demo machine for special price The machine state is as new. Price of machine is without clamping heads (shown on the photo) because this equipment will be delivered as option according to your requirements. Price includes: - Machine 100 % functional - incl. load cell 5 kN (quality class 0.5 from 50 - 5000 N) - warranty 24 month - software Graphwork 6 (actual) - without clamping heads (as option) - without costs for delivery (depending on distance) - incl. setup, training Optional: - clamping heads - bending support - compression plates - extensometer - climatic chamber Even everything for to perform standard test procedures or according to you company requirements up to high performance testing equipment like MICRON LASER SPECKLE (optical Laser Speckle ext ...

This evaporative dryer was built in Hungary by DKG-EAST RT in 1995. The equipment was transported to Finland, where it was inspected by Finnish Inspecta in 1999. The original purpose of this equipment was to concentrate waste water solution from a molasses production process by evaporating water, but the system was never installed. The certified pressure for the equipment is max 2.0 bar, min -1.0 bar. The input heat for the evaporation comes from steam of 200 °C. The equipment is suitable for similar purposes, concentrating waste water streams from various processes and thus reducing the amount of waste water to handle. Capacity in molasses wash water evaporation: Input of thin stillage: 30.0 t/h, 8.5 % Output of product stillage: 3.54 t/h, 72 % Steam input: 3.9 t/h, 200 °C, 11018 MJ/h Heater 1. Price 90.000 € Nominal heat surface 512 m², actual heat surface 518 m². Max ...

GeneralVertical Machining Centres; Control: Control F0iMF CharacteristicsTable surface1400 x 560 mmMovement X / Y / Z1100/560/510 mmSpindle taperBT 40 Tool Magazine with60 PositionsDrive power (25% DC)15 kWDrive power (100% DC)11 kWSpeed max.12000 rpmMaximum load (table centre)1000 KgRapid feed X / Y / Z36/36/30 m/minDimensions (L x W x H)3,19 x 2,76 x 2,94 (3,82 x 3,58 x 3,01) mWeight approx.5500 KgStandard spindle 12,000 min-1, 15/ 11 kWStandard Spindle 12,000 min-1, 15/ 11 kW Spindle speed: 12,000 min-1 Output: 15/13/11 kW (20/17.33/15 HP) (25%ED/30min/cont) Torque: 119/70/57 Nm (87.76/51.62/42.04 ft·lbf) (25%ED/30min/cont)Spindle Taper 7/24 Taper #40/ Grip MAS Spindle Taper 7/24 Taper #40/ Grip MAS This specification uses the spindle No. 40 7/24 taper / Grip MAS tool holder. The grip type and retention knob type of ATC are specified separately.Retention Knob: Special (Center-Throug ...

Hiwell batter mixer II, Hiwell DJJ100-II batter mixer utilizes ingenious mixer to evenly combine water and batter. This stainless steel mixer is applicable for high viscosity batters such as Tempura batter., Advantages, 1. Our parry battering machine involves utilization of cutting-edge control system, thus realizing repeatable operation cycles of high-speed mixing, low speed mixing and alarm on application of batter. Therefore, batter is prevented from sedimentation., 2. Mixing tank in this fruit battering equipment is endowed with separation layer, which is aimed to keep batter temperature between 10-20℃ by ice or cold medium., 3. Our batter mixing equipment comes with batter output pump, which offers excellent connectivity to battering equipment to form batter feeder., 4. Thanks to reliable protection system and Siemens electronic components, thisfruit processing equipment is operat ...

Fully automatic optimization and sorting system for wood friezes, hard and softwood Plant is for sale due to cessation of operation. Plant was only in use for 1/2 year. Equipment of the plant: 2 pieces bunker/silo loading Collection Division into 2 parallel lines Sorting out waste Merge/isolate scanners Feeder WoodEye SortCut Scanner Scanner WoodEye SortCut Equipment: 4-sided profile measurement 4-sided fiber/texture analysis/angle measurement for hardwood and softwood Parallel division into 1.) to the optimization line or 2.) to the sorting line Equipment 1.) Optimization line: Equipment 2.) Sorting line: Fully automatic sorting of friezes in 2 sorting lines with a total of 6 sortings + 2 x waste and subdimensions Fully automatic feeding of the sorting stations Fully automatic exchange of sorting boxes full/empty Fully automatic output and coding of the full sortin ...

BIZERBA checkweigher, Check-Weigher CWM model. High quality equipment. Used equipment, its condition is excellent, fully restored and with guarantee. Includes Bizerba touch screen, GT-CT model. Internal checkweigher. Weighing tolerance from 6000 gr to 100gr. Maximum production capacity of 100 packs per minute. Electrical power 220V, 50Hz, 2.4 A. Total equipment measurements 1950 mm long x 1510 mm high x 580 mm wide, total work tape measurements 1430 mm long x 580 mm wide x 800 mm high (adjustable), work tape measurements 430 mm long x 300 mm wide x 3 units including the scale. Checkweighing, checkweigher, dynamic scale, control scale, checkweigher. Its condition is excellent re-release. Equipment reviewed and guaranteed.

LIQUIDATION of labeling and automatic weighing train of the German manufacturer BIZERBA model GV1260.  Automatic labeling and weighing system for packaged products in the food area, cardboard boxes, large containers. Industrial equipment. Electrical power: Voltage 220 V, Frequency 50 Hz Current 1.7 A. Dimensions of ribbon width 650 mm long x 600 mm wide. Minimum and maximum dimensions of the package: length 100 mm-600 mm, width 50 mm-600 mm, height 20 mm-350mm. External dimensions of the machine: (mm) 2150 long x 1000 wide x 1880 high. Thermal print head - 8.0 point resolution. Weighing from 5gr to 30.000gr. Maximum labeling capacity 32 packs/minute. The equipment reviewed, rebuilt and guaranteed with the following maintenance performed: change of conveyor belts, thermal print head and motor belts.  High quality equipment and great performance in terms of speed and ...

Automatic labeller and weigher from the German manufacturer BIZERBA model GV. Automatic labeling and weighing system for packaged products in the food area. Industrial equipment. Equipment ready for PC connection, Bizerba software allows the realization and design of labels adapted to your needs. Ability to print all types of barcodes, customer logos, etc. The equipment reviewed, rebuilt and guaranteed with the following maintenance performed: change of conveyor belts, thermal print head and motor belts. High quality equipment and great performance in terms of speed and reliability. Electrical power: Voltage 220 V, Frequency 50 Hz Current 1.7 A. Dimensions of tape width 300 mm. External dimensions of the machine: (mm) 1860 long x 720 wide x 1300 high. Blower labeling compressed air feed: air pressure: 6 bar, air flow: min. 100 l/min, compressed air. oil-free ...

Key data: 500 mm, 160 mm

Optimisation cross-cut saw OptiCut S 90 Speed - Left-hand version Max. wood entrance length 7.2 m Wood dimensions to be processed Sawing unit for large wood cross-sections with saw blade diameter Ø 500 mm Saw blade made of tungsten carbide, Z=144, WZ 20° Saw Blade Drilling 30 mm Saw blade speed max. 3600 rpm. Input lengths min./max. Widths min./max. Thicknesses/thicknesses min./max. Nominal cross-sections (without board curvature) Min. 500 - 7200 mm 23 - 160 mm 12 - 100 mm 23 x 12 mm .max. 160 x 100 mm Package size at max.9 strips per package Packet Ratio Width and Length to Thickness 160x100 mm 2:1 Fixed length min. 60 mm Performance / Positioning Moving speed of the positioning slide infinitely variable max. approx. 240 m/min. Cutting time / cutting height Adjustable The practical daily output depends to a large extent on the production  ...

Vehicle: • Make: Nissan – machine overhauled 2023 • UVV Audit 11-2023 • Type: EGH02 F30U • Drive type: Diesel • Engine: Nissan 4 cyl. • Transmission: Automatic • Load capacity: 3000 kg • Load center: 500 • Lifting height: 3300 mm • Hours: 6557 • Internal no.: 03122023 Mast data: • Mast: Duplex with free lift and side shift • Lifting height: 3300 mm • Fork carriage: 1200 mm • Fork length: 1200 mm • Fork width: 100 mm • Fork thickness: 50 mm Dimensions: • Length: 2530 mm • Width: 1120 mm • Overall height: 2050 mm • Weight: 4390 kg Battery: NEW Tyres: • Front tyres: solid rubber tyres • Rear tyres: pneumatic tyres Attachments & special equipment: - Longer forks are available at an additional cost - Operating instructions available Extras: Preparation for road approval Mirror 3 Auxiliary h ...

• Meat lift for cutter carts, manufacturer ROCASA. • High-performance equipment, quality in terms of speed and reliability. • Basic Features of the Column Lift: - Model: T-500 - Construction: 100% Stainless steel structure. (Commercial parts or equipment assembly accessories, which are not in direct contact with food, may be in different materials) - Function: Lift and dump a cutter trolley with raw material inside equipment such as mixers and stuffers. - Designed: For lifting and tipping 200L, 300L and 500L EUROBIN cutter trolleys. - Adjustable tipping height: 2,130 mm maximum, minimum up to 5 positions of 100mm. - Maximum overall height: 3300 mm - Power: 3.0 KW. - Safety: With a lock nut that prevents the carriage from falling when the drive nut wears out. - Complies with CE Regulations. 380 V Three-phase. - Dimensions: Width: 1,300 mm, Depth: 1,000 mm, Height:  ...

Key data: 2070 , 5

Ostas SMR-S 2070x170 Premium - 3-roll sheet metal rolling machine with premium equipment Bending length: 2070 mm Capacity: 5 - 6 mm Standard equipment - Steel machine body ST-52 - large shafts made of certified steel with SAE 1050 (CK-45) - Chain and belt driven spiral gearbox for top and bottom rolls - Precision bending with brake motor - rear roller motorized - Manually extendable roller - Tape bending roller - Central lubrication system - Mobile control panel - Compliance with CE standards -User guide Included additional equipment - Digital display for lower roller - Digital display for rear roller - lower roller motorized - Hardened rollers - Extended roller shafts for fastening profile and tube bending rollers Optional equipment - Profile tube rollers Specification - Bending length: 2070 mm - Capacity with pre-bending: 5 mm - Capacity without pr ...

Ostas OPK 45 Premium - Profile & tube bending machine with premium equipment Standard equipment - Direct drive with gears -Steel frame - the two lower rollers are driven - the upper roller is idle - Hardened rollers - Shafts made of special steel material, hardened and ground - Horizontal and vertical working position - Roller shafts are hardened and ground made of special steel material - A set of hardened rollers - Adjustable guide rollers - Mobile control panel - Compliance with CE standards -User guide Included additional equipment -Digital readouts - 3-roller drive - Two-speed motor Optional equipment - Special rollers for tubes, profiles and angles - Angle bending rollersSpecification- Motor power: 0.75 + 1.5 kW - Roller Ø: 158 mm - Shaft Ø: 50 mm - Working speed: 4.5 m/min - Dimensions WxHxD: 775 x 1465 x 1035 mm - Weight: 420 kg

Equipment for plastic recycling Co-Extrusion system composed of two double spindle extruders BAUSANO MULTIDRIVE system 4 x 2, Series 92-BGP-5031. Year 1.985 - Its general condition is excellent, it has always had a permanent and impeccable maintenance. Suitable for the treatment of virgin materials and those from thermoplastics recovered from HDPE, LDPE, PS, PP, UPVC, PVC, and also for the manufacture of polymeric alloys such as the composition of PC + PAY + PB + Fiberglass, etc. Also the Composition of: PP, PAG, Fiberglass, Alloys with sawdust, nut shells, natural fibers and the like. You can also work only with the main extruder, in which case the production would drop only 30/40% The MULTIDRIVE transmission system, with corrotating spindles and four efficient motors, is a reference technology in the world of extrusion, guaranteeing the highest quality and precision, even in ...

Overview Most of the equipment, which belongs to this brewery, was manufactured in 2021 and 2022. There are several components which have never been used. The owner had purchased all the equipment to set up a micro brewery but then decided to shift the production of his beer to a bigger brewery, producing for him. Therefore all the equipment is for sale. List of components Manufacturer: Bühler AG Machine Type: malt mill Model: Smartgrist YOM: 2022 (used since February)   Manufacturer: Spadoni Machine Type: 25 hl brew house Model: RMB 2500 YOM: 2022 (not used yet) Capacity: 25 - 30 hl in one brewing process, two processes possible in ten hours   Manufacturer: ABC Perello Machine Type: steam generator Model: PMY - 12 YOM: 2022 (not used yet) Capacity: 1250 Kgv/h   Manufacturer: --- Machine Type: water softener Model: --- YOM: 2022 (used since January)   Manufacturer: Isma S.A. Machine ...

CLEARANCE of automatic labelling and weighing train from the German manufacturer BIZERBA model GS. High-quality equipment from the prestigious BIZERBA brand. Automatic double upper and lower labelling and weighing system for packaged food products up to 540 mm long. Labeling throughput: 100 packs per minute, maximum. Package dimensions: length 60/540mm, width 40/300mm, height 1/250mm. Container weight: 20/6000 gr. Label dimensions: width 30/100 mm, length 30/100 mm and distance between labels 2/20 mm. Printhead: thermal. Labeling technology. Top and bottom by blowing, positioning the label perfectly in place. The equipment is fully checked, guaranteed, certifying the quality of the product. Update to the latest version of the program. High quality equipment and great performance in terms of speed and reliability. Automatic Labeling Train, Automatic Weighing Labeling Machine, Tra ...

Equipment for speciation of metals, HPLC (Flexar) coupled to inductively induced plasma mass spectrometry (ICP-MS). The current state of the equipment is functional, it is in perfect condition. We also have some consumables that we would deliver with the equipment, torches, coils and some tubing and rubber bands. The time of use of the equipment from its acquisition in 2013 to December 2022 with daily use for metal analysis and chromium (VI) speciation.

Combined Cycle Gas Turbine Power Plant 75 MW/50 Hz – Zero Hours This equipment was delivered in 2017 by an EPC contractor who selected Rolls-Royce and Siemens as main equipment suppliers. This was a greenfield project and therefore delivery contained all equipment needed for 75 MW power plant operation, like fuel gas treatment plant, water treatment plant and complete switchyard with step-up transformers Manufacturing year: 2017 Gas turbine: Rolls-Royce Trent 60, Dry Low Nox Steam turbine: Siemens SST-300 Step up tranfomers: 2 pc Alstrom 11kV to 154 kW Complete switchyard: Siemens 154 kV Nominal output 100%: 60 MW + 15 MW Max efficiency: Single cycle 42 %, combi cycle 54% Heat recovery steam boiler: 30 bar / 300 C Water treatment: Sand and active coal filters + RO Documentation: Complete original in English Delivery: Complete plant equipment from water and gas t ...

GeneralUniversal Milling Machine Stealth Design; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal550 mmCross450 mmVertical420 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minIntegrated motor spindle speedMASTER®Drive power (100% DC) 25 kWDrive power (40% DC) 35 kWClamping System DIN ISO 7388-3-A, ADSpindle taper SK40Speed range - 20000 rpmTorque (40% DC) 130 NmTorque (100% DC) 86 NmSpecial equipmentSwivel rotary table capable of simultaneous operation Clamping surface D505 x 500 Swivel range -35 to +110°, 360° rotation axis including direct measuring systems B and C axis and level transformation Tool magazine 60 places SK40 Vertical chain with douSpecial equipmentWork area flushing Flush strips on the right side wall, Machine bed rear, cabin left and right front Working ...

Used Filling Monoblock Cerma 1998 The Cerma 46 MB filling monoblock is a highly efficient and reliable equipment that was manufactured in 1998 It is currently in storage but is ready to be put back into action at any time This monoblock is specifically designed for filling glass and PET containers with vinegar and it uses a volumetric fill type and fixed nozzle to ensure accurate and consistent results The monoblock is equipped with 23 valves which help to ensure that the filling process is fast and efficient It also has 4 capping heads for aluminum screw caps which helps to seal the containers securely and prevent any spills or leaks The rotation direction of the monoblock is counterclockwise This helps to ensure smooth and seamless operation In terms of safety the Cerma 46 MB filling monoblock has all the necessary features to ensure the safety of operators and the integrity of the pro ...

Modular labeling machine 10 heads Modular labeling machine Cold glue 4 stations Front back seal L neck ring self adhesive 3 stations Front back neck ring Bottles round square Label stations nr N 3 self adhesive stations N 3 Cold glue stations Central diameter 960 Plates nr 10 Length of the labels min max 10 150 Height of the label min max 15 200 Container diameter height min max 30 80 mm Altezza min max 100 400 mm Plate transmission Motorized plate Optical centering Yes Special inlet stars No 3 multi format in out stars D 50 120 mm Industria 4 0 yes predisposed other request Double screw input in phase Max speed request 6 500 bph Modular labeling machine basic machine composition 1 System built according to CE regulations 2 Machine operation via PLC Schneider 3 Touch screen control panel for labeler functions installed on a mobile and rotating support 4 Automatic variation of production  ...

Used Complete Bottling Line R Deckert 2012 The Used Complete Bottling Line footprint on the CAD is very large but the area covered by the 3 machines is relatively small and neat Filling Monoblock Rinser Filler Capper R Deckert F AVM 738 The machine due to the pucks has great flexibility on what bottles can be filled with very low changeover times The Company Chivas were running 50cl to 1 5l down the line and bottle shapes from Revolve to their standard Chivas 25 bottle The corker capper was running T cork and EST The speed is the slowest on the machines at up to 30 bpm Capsule spinner Kematec MBK 3 AR 3 head spinner with speed up to 45 bpm Scotserve has said although badged as Kematec the machine is built by Norton Krones equipment Labeller Solomodul II 1 200 15 Modular labeller with 3 station points on the machine and speeds up to 150 bpm There is also a 4th station as a spare or to all ...

Used Pasteurizer brand PG Completely Overhauled Used Pasteurizer Completely Overhauled for jars or cans in d b PG brand all stainless steel with squared stainless steel mesh complete with 4 water recycling tanks with relative pumps Pasteurizer equipment for sale with inlet and outlet belt blower for drying jars or boxes at the outlet steam modulating group shell and tube heat exchanger various pipes connections and all its accessories for operation The pasteurizer equipment for sale is totally overhauled Pasteurizer equipment is made up of two sectors of 9500 mm each Overall dimensions of the Used Pasteurizer PG Total length 19 00 m Useful belt length axis by axis 18 60 ms Useful net width 2 50 m Overall width 2 70 m machine body Overall width including trays 3 30 m Total useful area of the Used Pasteurizer Completely Overhauled sq m 46 Features by section Sterilization length mm 8 600 P ...

Oel-Diffusion pump Manufacturer: Leybold Type: DIP 50,000 Status: used Technical data Product: DIP 50000 Catalogue: 22240 Connection flange Suction side: DN 1000 ISO-F Connection flange Print side: DN 160 ISO-K Suction Below 1.0 x 10-4 mbar / 7.5 x 10-5 Torr: 50000 l/s working range: 1.0 x 10-2 - 5.0 x 10-7 mbar 7.5 x 10-3 - 3.8 x 10-7 Torr Final pressure: < 5.0 x 10-7 mbar < 3.8 x 10-7 Torr Max. pre-vacuum pressure: 6.0 x 10-2 mbar 4.5 x 10-2 Torr Equipment: Pump is delivered without equipment quantity of equipment min.: 12.0 l 12.7 qt max.: 25.0 l 26.4 qt grid connection: 3-ph Y, 400 V, 50/60 Hz Heating capacity: 24 kW Number of heating cartridges: 24 Heating time: < 30 min Number of cooling water circuits: 3 Cooling water minimum pump: 1500 l/h 6.6 gal/min Duesenhut steam barrier: 150 l/h 0.66 gal/min Max. Cooling water pressure: 6 bar 87 psi Cooling water connection pump: 1/ ...

Laser printer for plastics FARSOON eForm 3D built in 2017. The printer is offered with complete equipment for preparing powder and cleaning prints. The equipment was used to a small extent for about 12 months, it worked for about 2000 hours. The device operated in a gas shield from a cylinder. Complete with printer: 8 nitrogen regulators. Technical data of the FARSOON eForm 3D printer: - open control software: any modification of printing parameters - laser type: CO? - laser power: 30 W - dimensions of the printing chamber (W × D × H ) : 250 × 250 × 320 mm - single print layer: 0.06 ~ 0.3 mm, adjustable - maximum creation / build speed: 0.8 l / h (depending on the material) - precise scanning system: Galvo - scanning speed: 7.6 m / s - power requirements: 380 VAC, 50/60 Hz, 16 KVA, three-phase five-wire - maximum temperature in the chamber: 190 degrees C - heating el ...

LAMINATING SYSTEM POLYTYPE BB 2200 LAMINATION LINE Coating/- lamination equipment for solvent based resin system. On an existing film or composite material. Year: 2008 Condition: Excellent The different film thicknesses what can be used depending on the materials, see references: Plastic foils 25-250 microns Metal foils (copper, aluminium) 20-150 microns Total composite thickness max. 500 microns Machine data: Production speed 0 - 150m/min Production speed 840 - 2160mm Resin 1 - 40g/m2 Winding units (main winder-/ lamination winder-/tensilized film winder): For unwind of the base film there are two winders (main winder/ lamination winder). Winder performance: - Winding direction clockwise / anticlockwise - Brakes ystem for constant and regulated tension e.g. alu foil with max. 2000 kg roll weight - Roll system centerless for steel,plastic-, carton tubes with optimal  ...

Made in Italy Peak: 300 mm Rotary diameter over bed: 600 mm Rotary diameter via sled: 380 mm Peak: 1,500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8 " Spindle speeds: (12) 16-1200 U/min Engine power: 9.2 kW (special equipment/standard: 7.5 kW) Reprimor Z-axis: (93) 0.028-6.43 mm/U Feed X-axis: (93) 0.012-2.73 mm/U Thread, metric: (54) 0.5-224 mm Threads, Witworth: (55) 72-1/4 x8 TPI Thread, module: (54) 0.5-112 mm Threads, Diametral Pitch: (54) 64 -1/4 D.P. Crossleigh hub: 340 mm Oberslitten hub: 150 mm Riding stock pinol diameter: 85 mm Riding stove pinol stroke: 200 mm Ridstock cone: MK 5 Weight: About 3,200 kg Facilities: -3-axis digital display -Step-by-step speed adjustment -Automatic lubrication of the management railways -LED lighting -Micrometer bed strike -9.2 kW engine instead of 7.5 kW -Quick change holder system mul ...

Sales are made on behalf of the customer. Professional high-pressure cleaner DYNAJET 500th HELI Blue Performance The No. 1 in efficiency, power and performance. Professionals from all industries worldwide rely on dynaJET's highly efficient high-pressure water cleaners. These high-pressure units impress with their universal application possibilities, extreme cost-effectiveness, absolute reliability, long product life and uncompromising quality. Standard safety equipment offers you and your employees the highest level of safety. The latest generation of DYNAJET high-pressure units offers reduced fuel consumption, lower emissions and improved ease of use. Get efficiency, or even the opportunity to conquer new business areas, in your company. All DYNAJET high-pressure cleaners are comprehensively tested by our quality management before they are delivered. Our product and accessor ...

Sales are made on behalf of the customer. Professional high-pressure cleaner DYNAJET 350th HELI The No. 1 in efficiency, power and performance. Professionals from all industries worldwide rely on dynaJET's highly efficient high-pressure water cleaners. These high-pressure units impress with their universal application possibilities, extreme cost-effectiveness, absolute reliability, long product life and uncompromising quality. Standard safety equipment offers you and your employees the highest level of safety. The latest generation of DYNAJET high-pressure units offers reduced fuel consumption, lower emissions and improved ease of use. Get efficiency, or even the opportunity to conquer new business areas, in your company. All DYNAJET high-pressure cleaners are comprehensively tested by our quality management before they are delivered. Our product and accessory portfolio ensu ...

TECHNICAL DATA: Working area 3,000 x 1,500 x 115 mm Control Siemens Sinumerik 840 D Laser power 5,000 watts Max. sheet thickness structural steel 25 mm Max sheet thickness stainless steel 20 mm Max sheet thickness aluminium 12 mm Machine regularly serviced by TRUMPF! Standard: - Closed machine frame with integrated laser unit - TRUMPF laser TLF 5000 - Laser unit: CO2 laser, high-frequency excited, maintenance-free turboradial blower, cooling unit, logbook function - Automatic pallet changer and longitudinal conveyor belt - Drives: Gantry drive in combination with linear direct drives - Laser power control - Position laser diode - HI-LAS high-pressure cutting - Plasma sensor inges, PMS - Automatic sheet metal edge detection - Programmable performance cycles - Microweld - Automatic nozzle cleaning - Fast editing with SprintLas - ContourLas for making small ho ...

DYNAJET 500th HELI Blue Performance INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! For purchase: Including 1st UVV WITH arrival and maintenance (plus spare parts) on the same date (value approx. 1,500 net). The mobile and universally applicable dynaJET 500th cold and hot water high-pressure cleaner with up to 500 bar working pressure is characterized not only by its user-friendliness but also by its low weight, compact dimensions and high performance and safety level. Construction: • 1-axle chassis for easy manoeuvring • Self-supporting and indestructible framework for weight optimization • Central crane eyelet for optimal transport in hard-to-reach places • Frame in dip painting technology for high corrosion protection and hi ...

ULMA Super Chik, year of manufacture 2002 • Extended infeed conveyors. • Centralized lubrication. • Sanitary clean out tray. • Gravity and motorized exit conveyors: in line, 90º, 180º, ... • Additional 1 meter sealing device. • Automatic image centering device for printed films. • Printed band attachment. • Transparent tray detection. • Sealer Cooler. • Others (Ask). A high performance wrapping machine, specially developed for the wrapping of trays in central processing facilities (meat, poultry, fish, vegetables, fruits) and high volume supermarkets. A large range of models for customer requirements. Its strength, reliability, ease of operation, and automatic size change, make it the most automatic size change, make it the most productive and versatile machine available, possibility to wrap with several kinds of film: PVC, polyethylene and poly ...

Type: LT200-MY Twin Star Year of construction: 12/2006 Commissioning: 2007 Control: OSP – P200L Delivery time: ex stock The lathe is in very good general condition. Due to the basic and additional equipment, this used machine is versatile. With the automatic bar feeder, the double turret equipment, the additional Y-axis and the parts catcher, the machine produces your workpieces completely independently. From start to finish. Due to the equipment with main and counter spindle, production can be economically effective and fast. Machinery Collet chuck SMW on both sides Main and counter spindle Y-axis Conveyor Bar loading magazine Turbo 5-55 Parts catcher - B-turret with swivel ejection to the collection box (at the door). Onward transport by internal parts conveyor belt. Technical details Swing diameter: mm 400 turning diameter: mm 210 turning length: mm 960 2 tool ...

Packaging machine Beck Series Packer S 1732 - Used equipment built in 1986 -Operational The machine is equipped with a photo-electric control and regulates the work rhythm depending on the length of the packaged goods. This allows unequal parts to be packed in any order. The height and side adjustment of the machine takes place in seconds by means of a hand wheel. Functioning The machine works cycle by cycle, fully automatically with photo-electric control. The goods to be packed are introduced into the machine by means of a special infeed belt and shrink-wrapped on four sides. Oil hydraulics ensure exact operation of the welding system. The welding is carried out according to the impulse separation welding process and can be equipped with additional special welding elements. Odour nuisances are avoided by means of an exact, infinitely variable temperature adjustment of the w ...

The machine is already in Poland with us on site. , a drilling rig from the well-known Swedish brand Sandvik. Used for rocks mainly underground but can also work on the surface. This model is An excellent tool for securing high workings and tunnels, ensuring a safe working environment and constant access to the workplace. The universal screwdriver head design allows all common screw types and combinations to be used, with bolt lengths of up to 6 meters (20 feet), depending on the screwdriver head alternative chosen. The telescopic boom allows you to mount several rows of bolts without moving the machine. An optional second boom – screen holder or basket boom – increases productivity and versatility. Additional automatic functions allow the operator to focus on safe, fast and efficient rock reinforcement. The air-conditioned, soundproofed and tilting cab further enhances safety an ...

(Schloemann) Beche DGH 40 Ton ( Revamped by Schuler group 2019) Manufacturer: BECHE (Schloemann) Type: DGH 40 YOM: Revamped 2019 Machine Number: 2412-HW Including 12 Ton Wellman manipulator Impact work: 40,000 mkg Total bar lift.:1.250 mm Maximum number of strokes:80 Pro Minute Average score: 6 Pro Minute Air consumption per ten blow Blow in . m in required air at the strongest hit: 6.8 Cold Air Compressor performance in m3/min: 41 Cold Air Compressor performance in m3/min:27 Hot air (160° C) Power requirement of the compressor in hp:260 Cold Air Power requirement of the compressor in hp:180 Cold Air Air tank capacity:30 m3 Steam consumption per hit with the strongest hit:3.5 kg Steam consumption per minute (saturated steam):21 kg Clear width between the guides: 1200 mm Maximum singing sounds: 2700 mm Lowest overall height of the dies without dovetail: 575 mm O ...

Key data: 500 mm, 200 mm

JANUS HTC2050 CNC lathe was built in Poland in 2010. The machine, characterised by high stability and operational reliability, uses the necessary equipment for high-speed and finishing machining, allowing for precise machining of internal holes, columns, cones, arches and all types of screw threads. The machine uses a high-speed spindle with infinitely variable rotation speed from 40 to 4000 rpm and a bed inclined by 45°, which facilitates chip removal and increases the cutting force transmitted by the horizontal bed and its head. Rear and front spindle angular contact bearings simultaneously transfer radial and axial loads, ensuring low spindle temperature rise and less thermal deformation during high-speed finishing. The JANUS lathe equipment includes a state-of-the-art FANUC Series 0i Mate-TC CNC controller, a chip conveyor and the tools shown in the photos. The total weight of th ...

AUTOCLAVE HOBART Manufacturer HOBART model 304. The Hobart 304 pressure cooker is the fastest and most cost-effective way to produce the highest quality end product, while retaining all natural vitamins and minerals. Used equipment, its condition is excellent, fully restored and with guarantee. Cooking with dry steam, under pressure, produces food of exceptional color, appearance and flavor. It has an automatic one-touch control. The Hobart has a stainless steel cooking compartment and has the function of automatic defrost. The Hobart can produce 650 servings per hour. Power supply - 400/50/3 / N. Water supply (5) - R 3/4 ". The dimensions of this machine are: - 600 x 810 x 1000. It has 4 heights inside. Tray measurements for each height: 520 mm x 330 mm. This is a used item, but in good condition and in perfect working order. Pressure cooker, pressure steamer. Used equipment, its con ...

LIQUIDATION of automatic debarking machine from the manufacturer MAJA, mod. VBA500A. Its condition is of occasion equipment totally revised in its entirety (re-release) guaranteed. Characteristics: Tape width 450mm, blade width 450mm. Measures input tape: 1000 mm long x 450 mm wide. Output belt: 870 mm long x 450 mm wide. External measurements: 920 mm wide x 1190 mm high closed lid – 1790mm open lid, 960 mm high entrance tape x 2130 mm long. Electrical power: 1.1Kw, 2.6A, 380V, 50HZ, Equipment to plug and work. Its condition is excellent re-release. Equipment reviewed and guaranteed. OCCASION. NEGOTIABLE PRICE. Transport costs on behalf of the buyer. If you need any information, more photos, or videos and do any type of test in our exhibition pavilion you have at your disposal by calling the commercial attention phone. If you are really interested in the team, call us at our sho ...

Automatic labeling and weighing train from the German manufacturer BIZERBA model GV. Automatic labeling and weighing system for packaged products in the food area. Superior double labeling. Industrial equipment. Electrical power: Voltage 220 V, Frequency 50 Hz Current 2.4 A. Maximum package dimensions: 300 mm wide x 540 mm long x 240 mm high External dimensions of the machine: (mm) 3100 long x 720 wide x 1700 high. Thermal printhead - 8, 0 dot resolution Memory: 2 MB Weighing from 1gr to 6000gr. Maximum labeling capacity 60 packs/minute. The equipment reviewed, rebuilt and guaranteed with the following maintenance performed: change of conveyor belts, thermal print head and motor belts.  High quality equipment and great performance in terms of speed and reliability.

Traysealer from the manufacturer RETON FRESH PACKING , model RT -702. Equipment with gas flush option. Its condition is of occasion equipment totally revised in its entirety (re-release) guaranteed. Measures of the last of the tray to be sealed 145 mm x 230 mm x 70mm x 2 units. Acta for film reels of width 350mm. Overall machine size 1200 mm x 740 mm x 1760 mm high. Machine weight 450kg. The RETON tray seamer has been designed to package food products with a modified atmosphere, in industrial environments. Low investment, multiplicity of uses and flexibility explain the popularity of the RT-702 mod. With this you can close trays of different materials and sizes at high speed. Like all RETON packaging machines, it offers speed, reliability, quality and excellent performance, as well as easy maintenance. The mold can be changed in a few minutes and the machine is very eas ...

Skinetta ASK 450 Penalty Banding Machine Machine Purpose The tightening banding machines of the SKINETTA series serve the purpose of tightening individual products or several individual products with polyethylene film. banding (wrapping). In contrast to shrinking machines, the wrapping film is pulled tightly around the container before sealing. This streamlining is the main advantage of the procedure. The result is up to 20% less film consumption. A special advantage of the patented SKINETTA tightening system is the infinitely variable, fine dosing. The sealing (welding) of the film takes place in the smallest of spaces and a clean sealing seam with very small protrusions is created. By connecting a SKINETTAther or SKINETTAshrink heat cover and using a correspondingly wide film, the film protrusion protruding beyond the container can be shrunk laterally. This pre-singing m ...

GeneralIntegrated Mill Turn Center; Control: Control F31iB5 with CELOS CharacteristicsSwing- Ø, max.700 mmSpeed max.12000 rpmSlewability of B-Axis±120 degreeMovements X / Z / Y675/1562/300 (±150) mmMilling spindle upper side1 Bar diametre80 mmMax. Turning Length1530 mmSpeed max.4000 rpmMax machining diameter670 mmDrive power tool spindle5,5/3,7 kWDrive power milling spindle28/23 kWDrive power main spindle18,5/15 kWMovements X / Z200/1542 mmLower Turret10 PositionsNumber of Toolmagazine positions38 Weight approx.18500 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and p(Left Spindle) through-spindle hole dia. 91 mm, 4,000min-1 (STD)(Left Spindle) Through-spindle Hol ...

Make and Model: MAN E3268L E212 Fuel: Biogas/Natural Gas Year: 2017 Hours: 0 Capacity kW: 370 HZ: 50 Voltage: 400V Scope of supply: Engine, Alternator, Base Frame, Gas Line, ComAp Control System, Motortech Ignition boxes, Heat Exchanger and all the associated equipment. More details below. 1 x IV 8 control screen 1x AIO-NTC-BB - Base Box with AFR dongle 1 x InteliDrive Mobile MAN logger unit 2 x I-IO8/8 Binary input/output cards 2 x I-AIN8 analogue input cards 1 x I- AIN8TC thermocouple input card 1 x DN 100 throttle body with stepper motor and wiring harness 3 x Varistep 3 controllers - the system only needs 2 1 x Varifuel 2 gas mixer and all the adapters, bolts and gaskets 1 x Detcon 20 Knocking controller with 8 knock sensors and cables 1 x MIC 4 ignition controller with output harness 1 x Cam pick up with harness 1 x speed pickup with harness 1 x Set of ...

Six ABB 9100kVA (11kV 440V 720rpm 60Hz) synchronous generators plus six Unitrol 1020 AVRs. 2015 year of manufacture. Zero running hours after FAT. Designed and built for an offshore marine vessel, construction of which did not proceed. Necessary mechanical power for driving equipment approx. 7,5MW The following documentation is available and can be provided to interested parties upon request. - Technical specification, GA, and other drawings and documentation - American Bureau of Shipping (ABS) approval documentation - 2015 FAT reports witnessed by ABS - 2021 ABB inspection reports concluding the generators are in good internal condition The equipment is stored in the Vaasa area of Finland and is offered EXW under INCOTERMS 2020 on an as is, where is basis. Arrangements can be made for inspection. Wärtsilä Finland Oy has and can demonstrate clear title to the  ...