ep used for sale

Additional options New/unused EPA marked Yes Engine Mitsubishi S12R-PTA 1425 kVA generator power Generator Mecc Alte ECO43-2LN/ CE marked Yes Frequency 50 Hertz Voltage 400 V 2000 l tank capacity Total weight GVW 13,170 kg Dimensions (Lxwxh) 750x230x250 m Country of production Netherlands Additional Tank, Battery, Control Panel Other information

Te Koop: Vlinderklep van FLX. Butterfly valve. Type: wafer DN125, PN 16 EPDM

Complete printshop from one place in germany: Manufacturer: Ryobi 5 colors Model: 755 (S-5-A) Year: 03-2006 Equipment: aut. Print provision, pallet feeder, oscillating FA IVS equipment, Spectro Pro densitometer serial no. B201004, plate punch Beil, Connection for Foellmer counting tape inserter OK-90 Possibly. Number of prints: 38 million Availability: spring 2021 Price expectations: Defects: none, regular maintenance Manufacturer: Horizon Model: VAC-100A, SPF-200A HMU-100, ST-40, FC-200A, SC-200 Year: 04/2008 Equipment: Small format equipment MS-100, additional blower f. VAC-100, stacking lowering table, manual system HMU-100 Availability: spring 2021 Defects: none Manufacturer: Polar 92 Model: XT Year: 02-2007 Availability: spring 2021 Defects: none, regular maintenance Manufacturer: Horizon folding machine Model: AFC-504AKT Year: bought used 04 - 2009  ...

Polystyrene compressor Styropactor NANO | Polystyrene press for polystyrene EPS Polystyrene compressor. Combination of shredder and press for polystyrene, EPS polystyrene beetle NANO 1-phase Commodity code 42020 Throughput: Measured with fish crates of 25 KG/M3 Material space weight EPS: 10-15 kg/h Throughput in fish crates with lid measured 650 grams per piece and about 800x400x220mm): 10-15 boxes/pc Wet boxes: YES Stainless steel version: YES 40'HC container YES Mobile version (with wheels): YES Density (after compaction): 200-500 kg/m³ Connection: 1.5kW, 1-phase, 230/110 V, 50-60Hz Insertion opening: 300×490 mm Length: 1850 mm Height: 1400 mm Width: 660 mm KBM Styroverdichter reduce the volume of EPS (STYROPOR) by about 20-40 times with dry and moist material (including fish crates) The NANO is suitable for industrial use and smaller volumes and quantities. Al ...

Polystyrene compressor Styropactor MICRO | Polystyrene press for polystyrene EPS Polystyrene compressor. Combination of shredder and press for polystyrene, EPS MICRO 1-phase Commodity number 42025 Throughput: With fish crates of 25 KG/M3 Material space weight EPS measured: 15-20 kg/h Throughput measured in fish crates with lid (650 grams per piece and about 800x400x220mm): 23-30 Density (after compression): 175-225 kg/m³ Connection: 1.5kW, 1-phase, 230/110 V, 50-60 Hz MICRO 1F-3-phase Commodity number 42026 Throughput: With fish crates of 25 KG/M3 Material space weight EPS measured: 15-20 kg/h Throughput measured in fish crates with lid (650 grams per piece and about 800x400x220mm): 23-30 Density (after compression): 250-350 kg/m³ Connection: 2.2kW, 3-phase, 400 V / 50 Hz, 480 V / -60 Hz Wet boxes (yes): YES Stainless steel version: YES Mobile version (wi ...

Styrofoam compressor Styropactor MINI | Polystyrene press for polystyrene EPS Polystyrene compressor. Combination of shredder and press for polystyrene, EPS MINI 1-phase Commodity number: 42030 Throughput with fish crates of 25 KG/M3 Material space weight EPS measured: 15-20 kg/h. Throughput measured in fish crates with lid (650 grams per piece and about 800x400x220mm): 23-30 Boxes/ST Density (after compression): 175-225 kg/m³ Connection: 1.5kW, 1-phase, 230/110 V, 50-60 Hz Insertion opening: 400×780 mm Length: 2220 mm Height: 1600 mm Width: 630 mm MINI 1F-3 phase Commodity number: 42032 Throughput with fish crates of 25 KG/M3 Material space weight EPS measured: 15-20 kg/h. Throughput measured in fish crates with lid (650 grams per piece and about 800x400x220mm): 23-30 Boxes/ST Density (after compression): 250-350 kg/m³ Connection: 2.2kW, 3-phase, 400 V / 50 H ...

Te Koop: vlinderklep handbediend. Wouter Witzel butterfly valve; Type: EVFS DN150 PN16 EPDM.

The YC2500HR Large Format Printer was manufactured by the Chinese company Linyi Win-Win Machinery Co., Ltd. in 2019. The digital printer provides the highest print quality thanks to the LED UV curing system and eight 6th generation Ricoh print heads with CMYK + 2x WHITE + 2x VARNISH configuration. The machine allows you to print at a speed of 30 m2 / hour on items such as: ceramics, PVC plates, corrugated cardboard or plastic. The maximum width of printing on an object is 2500 mm. The plotter is equipped with RIP ONYX Software, Panasonic servo motor and TAIWAN HIWIN linear motor. Technical data of the YC2500HR large format printer - type of carrier: PVC, metal plates, glass, wooden boards, acrylic, ceramics, wallpaper, corrugated cardboard, plastic - RIP software: ONYX Software - print heads: 6th generation Ricoh - number of print heads: 8 - configuration of heads: CMYK + 2x WH ...

100 m³ / 100,000 l extinguishing water tank according to DIN 14230 Tank volume: 100,000 liters / 100 m³ Length: approx. 15,750 mm Diameter: approx. 2,900 mm Weight approx. 16,300 kg Material: Steel material S 235 JRG 2 Underground tank for underground storage according to DIN 6608, single or double-walled, suitable for the walkable and passable area (load class SLW 30) with 1 dome (manhole) DN 600 with blind lid, seal and screws. New or used immediately available! The container is emptied, cleaned, overhauled and tested for leaks by us as a specialist company. The container complies with the regulations of DIN 14230 (Underground extinguishing water tank): - Extinguishing water suction connection according to DIN 14244 with a mounted Fire brigade coupling / fixed coupling A according to DIN 14319 in the Form B version without bearing nozzle - Vent flange nozzle in  ...

Additional options New/unused EPA marked Yes Engine Mitsubishi S12RPTAA2 Generator power 1650 kVA Generator Mecc Alte ECO46-1S/4 CE marked Yes Frequency 50 Hertz Voltage 400 V 2000 l tank capacity Total weight GVW 18,000 kg Dimensions (Lxwxh) 900x280x348 m Country of production Netherlands Additional Tank, Battery, Control Panel Other information Available with soundproof canopy as well. For more information, please download the specification sheet.

90 m³ / 90,000 l extinguishing water tank according to DIN 14230 Tank volume: 90,000 liters / 90 m³ Length: approx. 13,500 mm Diameter: approx. 3,000 mm Weight approx. 11,000 kg Material: Steel material S 235 JRG 2 Underground tank for underground storage in accordance with DIN 6608, single or double-walled, suitable for walkable and passable areas (load class SLW 30) with 1 dome (manhole) DN 600 with blind lid, seal and screws. New or used immediately available! The container is emptied, cleaned, overhauled and tested for leaks by us as a specialist company. The container complies with the regulations of DIN 14230 (Underground extinguishing water tank): - Extinguishing water suction connection according to DIN 14244 with a mounted Fire brigade coupling / fixed coupling A according to DIN 14319 in the Form B version without bearing nozzle - Vent flange nozzle in N ...

80 m³ / 80,000 l extinguishing water tank according to DIN 14230 Tank volume: 80,000 liters / 80 m³ Length: approx. 12,780 mm Diameter: approx. 2,900 mm Weight approx. 13,250 kg Material: Steel material S 235 JRG 2 Underground tank for underground storage according to DIN 6608, single or double-walled, suitable for the walkable and passable area (load class SLW 30) with 1 dome (manhole) DN 600 with blind lid, seal and screws. New or used immediately available! The container is emptied, cleaned, overhauled and tested for leaks by us as a specialist company. The container complies with the regulations of DIN 14230 (Underground extinguishing water tank): - Extinguishing water suction connection according to DIN 14244 with a mounted Fire brigade coupling / fixed coupling A according to DIN 14319 in the Form B version without bearing nozzle - Vent flange nozzle in NWN  ...

60 m³ / 60,000 l extinguishing water tank according to DIN 14230 Tank volume: 60,000 liters / 60 m³ Length: approx. 12,680 mm Diameter: approx. 2,500 mm Weight approx. 9,500 kg Material: Steel material S 235 JRG 2 Underground tank for underground storage according to DIN 6608, single or double-walled, suitable for the walkable and passable area (load class SLW 30) with 1 dome (manhole) DN 600 with blind lid, seal and screws. New or used immediately available! The container is emptied, cleaned, overhauled and tested for leaks by us as a specialist company. The container complies with the regulations of DIN 14230 (Underground extinguishing water tank): - Extinguishing water suction connection according to DIN 14244 with a mounted Fire brigade coupling / fixed coupling A according to DIN 14319 in the Form B version without bearing nozzle - Vent flange nozzle in NWN 1 ...

Additional options New/unused EPA marked Yes Engine Mitsubishi S16R-PTA 1915 kVA generator power Generator Mecc Alte ECO46-2S/4 CE marked Yes Frequency 50 Hertz Voltage 400 V 2000 l tank capacity Total weight GVW 18,950 kg Dimensions (Lxwxh) 900x280x348 m Country of production Netherlands Additional Tank, Battery, Control Panel Other information Available with soundproof canopy as well.

50 m³ / 50,000 l extinguishing water tank according to DIN 14230 Tank volume: 50,000 liters / 50 m³ Length: approx. 10,700 mm Diameter: approx. 2,500 mm Weight approx. 8,000 kg Material: Steel material S 235 JRG 2 Underground tank for underground storage according to DIN 6608, single or double-walled, suitable for the walkable and passable area (load class SLW 30) with 1 dome (manhole) DN 600 with blind lid, seal and screws. New or used immediately available! The container is emptied, cleaned, overhauled and tested for leaks by us as a specialist company. The container complies with the regulations of DIN 14230 (Underground extinguishing water tank): - Extinguishing water suction connection according to DIN 14244 with a mounted Fire brigade coupling / fixed coupling A according to DIN 14319 in the Form B version without bearing nozzle - Vent flange nozzle in NWN 1 ...

Additional options New/unused EPA marked Yes Engine Mitsubishi S16R-PTA2 2100 kVA generator power Generator Mecc Alte ECO46-1 l/4 CE marked Yes Frequency 50 Hertz Voltage 400 V 2000 l tank capacity Total weight GVW 20,100 kg Dimensions (Lxwxh) 900x280x348 m Country of production Netherlands Additional Tank, Battery, Control Panel Other information Available with soundproof canopy as well.

Several 150 m³ storage tanks made of steel (extinguishing water tanks) lying underground Volume: 150,000 liters Diameter: approx. 3,000 mm Length: approx. 22,500 mm Weight: approx. 28,000 kg The tanks are converted into underground extinguishing water tanks in accordance with DIN 14230: The tank has an extinguishing water suction connection according to DIN 14244 with a mounted fire brigade coupling / fixed coupling A according to DIN 14319 in the version form B without bearing nozzle. Furthermore, the tank has a vent flange nozzle in NW/DN 100 with cap in a total length of approx. 1,300 mm suitable for 800 mm earth cover and 500 mm above ground. - the container is emptied, cleaned and has been provided with a bitumen exterior paint by us at the factory - if necessary, we can equip the tank with an inner full coating based on bitumen (against corrosion) or epoxy res ...

100.000 Liter water tank - Earth tank for underground storage, single or double walled, 1 dom DN 600 with blind lid incl. seal and screws - used - Tank volume: 100,000 liters / 100 m³ Length: approx. 15,750 mm Diameter: approx. 2,900 mm Weight approx. 11,600 kg Material: Steel material S 235 JRG 2 - the container is emptied, cleaned and has been provided with a bitumen exterior paint by us at the factory - if necessary, we can equip the tank with an inner full coating based on bitumen or epoxy resin inner coating (against corrosion) - it is also possible to line the container with a plastic inner shell - as standard, the container receives an inflow or overflow suitable for 100 KG pipe (other nominal diameters are also possible) A cost-effective delivery with your own truck is possible. Simply tell us the place of delivery, you will then immediately receive the exact ...

Additional options New/unused EPA marked Yes Engine Mitsubishi S16R-PTAA 2250 kVA generator power Generator Mecc Alte ECO46-1 l/4 CE marked Yes Frequency 50 Hertz Voltage 400 V 2000 l tank capacity Total weight GVW 21,100 kg Dimensions (Lxwxh) 900x280x348 m Country of production Netherlands Additional Tank, Battery, Control Panel

Te Koop: JLX vlinderkleppen handbediend. Butterfly valve. Wafer. Type DN 250 Pn16 EPDM

Product name: Compressor Manufacturer: Kaeser Type: EPC 340-100 Article number: 1.5746.7 Year of construction: 2011 Condition: in good used condition, checked technical details: operating pressure: 10 bar • Delivery quantity: 230 l/min (6 bar) • Speed: 1,500 rpm • Container: 90 l • Weight: 73 kg without consoles (per console 15.0 kg) • Sound pressure level dB(A): 73 Engine data: • Motor: 400 V, 1.7 kW Metrics: L x W x H: 1,120 x 350 x 910 mm Transport dimensions: • L x W x H: approx. 1,200 x 800 x 1100 mm • Transport on pallet: 1,200 x 800 mm Our price: 839,00 € (EUR) FP plus VAT from location Grunow (Brandenburg) (Subject to changes and errors regarding technical data and prices!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.

Additional options New/unused EPA marked Yes Engine Mitsubishi S16R2PTAW Generator power 2500 kVA Generator Mecc Alte ECO46-1.5 L CE marked Yes Frequency 50 Hertz Voltage 400 V 2000 l tank capacity Total weight GVW 21,300 kg Dimensions (Lxwxh) 900x280x348 m Country of production Netherlands Additional Tank, Battery, Control Panel

GS12 - used approx. 26 m³ / 26,000 litres steel tank, gravel filter, pressure tank, water cistern. The container is used and in good condition. capacity: 26.2 m³ / 26,200 litres material: steel tank, pressure tank 6 bar outer dimensions: approx. Ø 2.90 m x height 5.70 m inner dimensions: approx. Ø 2,80 m x height 3.80 m weight: 6 tons output: 42 m³/h year of production: 2000 comm. nr. 22857/3 other: painted blue, threefold epoxy resin coating inside Aboveground pressure tank made of steel, standing vertically on four feet, with two acces holes DN500, one DN300, former gravel filter. Incl. flanged / welded nozzle floor with screwed-in filter nozzles, inner mud funnel, all required connections for untreated water inlet, treated water outlet, backwash in- and outlet and ventilation. This steel tank can be used as gravel filter for filtration, de-icing and  ...

M. No.: 821301-10002 Equipment / further information: Hardware • OptiPrint™ Media Cleaner • Driven roller feed system with media flanges • Driven reel system with media flanges • Baskets • Rear and front media sensor • Hard disk (2 GB job space) Interface • Control panel with 8 buttons. • 4x20 character liquid crystal display. • English display language. • Metric or English units. Functionality • 16 user configurations. • Automatic alignment system. • Up to eight colors/job • OptiTrac Save Ribbon • Right side of the tape • OptiTrac colors: mirror silver and gold Cut: • Concatenation and curve smoothing to achieve better cutting quality. • OptiCut drag motion optimization. • Overlap for easy weeding. • Multiple reprint function (up to 999). • Flash Eproms With 5 cassettes and various ribbons Operating instructions

Cable Extension Sensors, WDS-40000-P200-M-S0, Miro Epsilon, new, Manufacturer: Micro Epsilon Type: WDS-40000-P200-M-S0 Measure length: 40000mm including test report Attention! We have set the lowest price for the new part on the market. We have other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Function guarantee! For second hand parts, we can not accept any conventional guarantee and warranty. Since we know that the device works, we give you a functional guarantee when you buy it. If the device does not work within 6 months after purchase you can return the goods and we will refund the purchase price.

consists: punching machine IBICO EP-28: Watt 510/ Volts220/ AMPS 2.3/ no. 10394/ Hz50 punch binding machine IBICO EPK-21: Watt 250/ Volts 230/ AMPS 1.5/ No. 118713/ Hz50 punching machine IBICO HB-28 Perforator

Cold water high-pressure cleaner with 15 kW output 380 bar pressure and 21 l/min. Connection: 3 x 400 V; 50 Hz or 3 x 460 V; 60 Hz.; 32 A Equipment: - Epoxy coated steel frame - Stainless steel cover - Compact, narrow chassis with stop function - Crane lifting device - Triplex high-pressure pump - Water inlet temperature max. 60°, thermal valve - Main switch with emergency stop function - Soft automatic start-up - Grid monitoring (phase control and undervoltage) - Connection cable 5.0 m with 32 A plug (50 Hz/60 Hz) - Water inlet filter Standard accessories: - 10m high pressure hose DN10, kink protection on both sides - High pressure gun with isotube - Double jet tube and high pressure nozzle 030 Special equipment (included in the price): - Automatic start-stop with flow switch and switch-off delay 30 seconds - Water inlet filter 10" with sand filter insert and ...

24 PICANOL PCB boards from PICANOL looms composed of: 3 x PICANOL AISQ-B/2C-1 ref. BE151623, 1 x PICANOL AISQ-B/4C-1 ref. BE151624, 4 x PICANOL GDLP-2 ref. BE152373, 1 x PICANOL J-1 ref. BE152379, 2 x PICANOL DTS-1 ref. BE153319, 4 x PICANOL AIS-C/HP/4C-4 ref. BE153947, 2 x PICANOL AISE/HPT280/TI/6C-4 ref. BE153951, 3 x PICANOL CPUE-3 ref. BE154114, 3 x PICANOL AUT-S/EP2C-3 ref. BE154180, 1 x PICANOL SUP-3 PH600S ref. BE205734

Cold water high-pressure cleaner with 15 kW output 380 bar pressure and 21 l/min. Connection: 3 x 400 V; 50 Hz or 3 x 460 V; 60 Hz.; 32 A Equipment: - Epoxy coated steel frame - Stainless steel cover - Compact, narrow chassis with stop function - Crane lifting device - Triplex high-pressure pump - Water inlet temperature max. 60°, thermal valve - Main switch with emergency stop function - Soft automatic start-up - Grid monitoring (phase control and undervoltage) - Connection cable 5.0 m with 32 A plug (50 Hz/60 Hz) - Water inlet filter Standard accessories: - 10m high pressure hose DN10, kink protection on both sides - High pressure gun with isotube - Double jet tube and high pressure nozzle 030 Special equipment (included in the price): - Automatic start-stop with flow switch and switch-off delay 30 seconds - Water inlet filter 10" with sand filter insert and ...

GEA Plate heat exchanger NT50T CDS-10 with 10 plates in very good condition Material: 1.4405 Min./Max. permissible pressure: 0 bar / 6 bar (both sides) Min./Max. permissible temperature: 0.0 °C / 100 °C Test pressure: 7.8 bar Volume: 0.82 / 1.03 L Kerb weight: 83 kg Width: 320 mm Height: 670 mm Depth: 600 mm Connections: 2x Flange DN50 2x Flange DIN 11851 (milk pipe thread) Number of plates: 10 Last refrigeration/heat medium: water-glycol mixture Seals: EPDM

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Alpine Mikro Classifier CC22, from our former generation previous to our current technological evolution. This air classifier can operate off-line as a stand alone system or in-line as the perfect companion for a Hosokawa Alpine ACM 10 or ACM 15 impact classifier mill, to ensure no undesired fine dust particles are present in the final micronized product, usually in the ...

GEA Plate heat exchanger NT50T CDS-10 with 10 plates in very good condition Material: 1.4405 Built: 2007 Min./Max. permissible pressure: 0 bar / 6 bar (both sides) Min./Max. permissible temperature: 0.0 °C / 150 °C Test pressure: 7.8 bar Volume: 0.82 / 1.03 L Kerb weight: 88 kg Width: 320 mm Height: 670 mm Depth: 600 mm Connections: 2x Flange DN50 2x DIN 11851 (milk pipe thread) Last heat medium: steam Seals: EPDM

Electronic Components Drilling Rig StankoImport Stanko-Import 2A622/1600 Electronic components from a Stanko Import drilling rig How 3-pulse thyristor amplifier Bosch Siemens Sikostart Bosch PC200 ZE with Bosch Eprom Bosch PC200 E24V Input Bosch PC200 AR/2A Output Bosch PC200 NT5V Gvvrsw Murrelektronik Type NLS 100-220/24 Uprim 110/220 Upc 24V= Mat.Nr. 031447-102401 Mat.Nr. 031447-102303

Measuring machine make MORA type 0190Fabr. -No: 16079/0888 year 02/88 for measuring rotational parts(as used to measure propellers)in 2 levels, in conjunction with a pivot point with encoderMeasuring height: 1500 mmMeasuring width: 1200 mmDistance of the pivot point from the measuring stand: 1400 mmInstallation height from the chuck to the highest position of the chuckProbe: 1260 mmChuck with inner jaws: 240 mm Drm.Space requirement with internal jaws: 2550 x 750 x 2550 mmWeight estimated approx .: 700 kgWith- Digital display with keyboard for X and Z attached to the machine- Turn-Check-Program MS-DOS Version 1.3 for measuringxa0propellers- EPSON FX 1000 printer- Calculator PEALOCK- Monitor- Measuring head RENISHAW with various buttons- technical documentsused, from an operational resolution, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Pay ...

- net.weiht 641 kg - Liquid wolume 253 L - Design pressure 10 bar - Total area 91,9 m2 - material AISI 316 - sealing material EPDMF CLIP-ON

Vehicle data: Make: Komatsu, Type: PC16R-3H, Drive type: Diesel, \Year of construction: 0, Internal no.: 1305, Mast data: Dimensions: Battery & Charger: Description & Special equipment: Attachments: Quick coupler, Bucket, bucket in 400 mm and 600 mm -Ditch clearing bucket hydraulic 1000 mm Special equipment: Front tyres: 0 x / Rear tyres: 0 x / / Description: We rent a brand new KOMATSU mini excavator type PC16R-3H with tiltable ROPS/FOPS cab and heating, proportional control (via EPC lever) HCU-A and 2 work lights on the cab front (HCU-A/EPC) (NOT in conjunction with Utility KOMTRAX for cabin) Basic machine with hydr. adjustable undercarriage, 2 speeds with auto-shift-down, servo pre-control, swivel boom, 2-way additional hydraulics to boom (switchable to hammer operation), variable displacement pump (210 bar), protective cover on the boom lifting cylinder, work lights on the boom, doz ...

TECHNICAL SPECIFICATIONS Manufacturer: SBM Basic Construction / SANDVIK Crusher Designation: Crawler mobile pre-crushing system Version: With SANDVIK double roller crusher Year of construction: 2016 Throughput: 1,000 t/h Total weight: 230,000 kg Operating mode: Hand/Automatic Mains voltage: 3400 V (AC), main switch 1000A Controller: - Control cabinet with enclosure - Incl. control with visualization - Incl. error display with operator panel COMPOSED OF 1) Feed bunker Dimensions (LxW): approx. 4.5 x 6.0 m Content: approx. 30 cbm 2) Record tape Type: PA 18 x 9.5 m Version: with crawler chain Plate width: 1,800 mm Plate tape length: 9.5 m Drive power: 90.0 kW (2 x 45.0 kW) 3) SANDVIK Double Roller Crusher Type: Hybrid CR810/12-20 Roll diameter: 1,200 mm Roll length: 2,000 mm Drive power: 2 x 200 kW (direct drive) Throughput: 1,000 - 1,200 t/h Total weight ...

This palletising system processes with container transport, turning station, grouping station, automatic liner magazine, Motoman robot EPL, 250KG Lifting power Designation: Palletizer Manufacturer: Profipack, Robopack, Logopack. Year of Construction: 2007 very few operating hours Capacity: about 160-200 layers/h Availability: from now on

Storage tanks/ steel tanks/ extinguishing water tanks/ water cisterns pressureless, standing Content: 30,000 litres Available: 4 pieces UNI-OFF-FOR B. No. 20-137 GL internal epoxy resin-coated steel containers (wine tanks) Dimensions: Diameter approx. 3,000 mm Zyl. Height approx. 3,820 mm Total height with feet approx. 5,000 mm Containers with curved floors Wall thicknesses: sheath 9 mm, floors 10 mm on top floor in the middle: 1 block flange DN 50 on the coat: 1 manhole 450 x 350 swivel 1 flange trim NW 40 2 Block flanges NW 20 in the middle of the underbody: 1 block flange DN 65 otherwise according to sketch + photos

Description CNC lathe from Gildemeister suitable for tooling, fixture construction, training as well as mold making Circulation over bed 400 mm Circulation over flat sleds 225 mm Technical data Type NEF CT 40 12500 hours according to display Circulation over bed 400 mm Circulation over flat loops 225 mm longitudinal path 660 mm spindle bore 68 mm Speed range 25 – 4000 rpm Control EPL 1 Holder VDI 30 12-fold tool disc

1 gebr. Corundum disc mill type T4, in vertical version Technical data: Make: KORUMA Type: T4 Drive power: 18.5 KW three-phase motor (completely new drive motor) Operating voltage: 400 V, 50 Hz, 3 phases Protection: IP 54 Speed: 3000 rpm Material of the product-contacting parts: 316 L (1.4404/1.4435) Shaft sealing: shaft sealing ring Side seals: EPDM Connections: Suction side DN 80 DIN 11851 Capacity: 300-1800kg/h Grinding discs: 240mm Gehäuse_ with double sheath for heating/cooling

Order No. 6720 TECHNICAL DATA - diameter of the main saw 500mm - 35mm spindle diameter - max cutting height 70mm - max material width 210mm - min / max length of the material before cutting 500 / 4000mm - pneumatic blade slide - diameter of the extraction port 100mm, 140mm - overall dimensions: length / width / height 2700x1200x1650mm + control - 3kW engine - feeding table with pull rollers - 0.37kW engine - overall dimensions: length / width / height 5100x900x1000mm - sorter with 4 pneumatic ejectors - 0.75kW engine - overall dimensions length / width / height 5500x1000x1050mm - constant feed speed - total weight 2245 kg - Italian production - original DTR + CE documentation - used machine, very good condition PRODUCT FEATURES The Cursal TRV 2200E 500 optimizer is designed for cross cutting of material. Truncated elements can be grouped according to their le ...

750 MW each, UNUSED Gas Based Complete Combined Cycle Power Plants 2 units available Technical Specifications: The Project Details: 1. EACH module has two Gas turbines GE 9FA.03 (DLN2+) and one Steam turbine GE D11. Each GT exhaust is directed to the triple pressure unfired, natural circulation horizontal, type CMI USA HRSG. This configuration helps turndown operation of station up to 45%. 2. The Station is based on robust design of GE Gas Turbine with high efficiency DLN2+ Dry low Nox system, each GT is site rated for an output of 235 MW and the triple pressure reheat GE D11 Steam Turbine with downstream Exhaust, is site rated at 266 MW. The HRSG is a Triple pressure, Natural circulation, Horizontal design type with Deaerator atop the LP drum. Thus Net Combined cycle efficiency at Site condition is approx 57% on LHV basis. The inherent design of the gas turbine reduced the N ...

40,000 litres of earth tank for storing rainwater, service water, extinguishing water, etc. on request with extinguishing water suction connection DIN 14230 Dimensions: D = 2,50m - L = 8,70m The container is equipped with a high-quality POLYURETHANe coating on the outside and has a manhole DN 600 with dome lid, screws and seal. On request, the container can be fully equipped with a extinguishing water suction connection, the container then meets the requirements of DIN 14230 - underground extinguishing water tank: Extinguishing water suction connection / suction line made of stainless steel V2A - according to DIN 14230 - consisting of: - 1 pc. suction line DN125 made of stainless steel - V2A - 1 pc. extinguishing water suction connection, overfloor, according to DIN 14244 - Form B, incl. A-fixed coupling according to DIN 14319 and A-deck capsule according to DIN 1 ...

60,000 litres of earth tank - new from the factory - single-walled - for storing rainwater, service water, extinguishing water, etc. on request with extinguishing water suction connection DIN 14230 Dimensions: D = 2,50m - L = 12,80m The container is equipped with a high-quality POLYURETHANe coating on the outside and has a manhole DN 600 with dome lid, screws and seal. On request, the container can be fully equipped with a extinguishing water suction connection, the container then meets the requirements of DIN 14230 - underground extinguishing water tank: Extinguishing water suction connection / suction line made of stainless steel V2A - according to DIN 14230 - consisting of: - 1 pc. suction line DN125 made of stainless steel - V2A - 1 pc. extinguishing water suction connection, overfloor, according to DIN 14244 - Form B, incl. A-fixed coupling according to DIN 1 ...

L 45 Kw POWER 680 Kg/h (material-dependent/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSING SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for the wood chip raw material - Pellet mill with main motor 45 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system for controlling the clogging of the matrice Moisture monitoring - Cooling and dedusting system for the pellets produced via a screw

80,000 litres of earth tank - brand new - single-walled - for storage of rainwater, service water, extinguishing water, etc. on request with extinguishing water suction connection DIN 14230 Dimensions: D = 2,90m - L = 12,80m The container is equipped with a high-quality POLYURETHANe coating on the outside and has a manhole DN 600 with dome lid, screws and seal. On request, the container can be fully equipped with a extinguishing water suction connection, the container then meets the requirements of DIN 14230 - underground extinguishing water tank: Extinguishing water suction connection / suction line made of stainless steel V2A - according to DIN 14230 - consisting of: - 1 pc. suction line DN125 made of stainless steel - V2A - 1 pc. extinguishing water suction connection, overfloor, according to DIN 14244 - Form B, incl. A-fixed coupling according to DIN 14319 and ...

Microbiological protection and PCR cabinet with vertical air flow General characteristics Vertical hood with laminar flow, Class 100 is used for handling different samples in a sterile environment without turbulence and without impurities in the working room. Protects the work area both against microorganisms and other air contaminants, chemically toxic vapors and unpleasant odors, .. etc. Automatic electronic monitoring system controls all functions and all safety alarms of the system according to EU norms offers many working possibilities: 1) Overpressure system: part of the sterile air is evacuated through the front opening. 2) Pressure lowering system: part of the filtered air is evacuated while the outside air is partially brought inside creating a protective barrier without affecting the laminar flow. Protection of personnel and the environment, but can also be used for work ...

L 30 Kw POWER 450 Kg/h (material-dependent/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSING SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for the wood chip raw material - Pellet mill with main motor 30 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system for controlling the clogging of the matrice Moisture monitoring - Cooling and dedusting system for the pellets produced via a screw

Enlargement: 0 x Table length: 0 mm Table width: 0 mm Technical data Screen width: 560 mm Screen height: 460 mm Microscope stage length: 210 mm Microscope stage width: 150 mm Longitudinal way: 50 mm Transversal way: 30 mm Diameter of the glass table: 80 mm Amplifications: 10: 1 x 20: 1 x 50: 1 x 100: 1 x Change of objective with: slide Lighting: Diascopy lighting episcopy Voltage 50 Hz 3x: 220 Volt Machine´s weight about: 250 kg Overall dimensions machine: Length: 1100 mm Width: 700 mm Height: 1900 mm Various accessories: Colour filter Obscuration device