ep used for sale

Press capacity: max. 60 t Stroke of the punch: 125 mm Filling height: max. 110 mm Motor: 15 kW Approx: 1650x1801x3390 mm Net weight: 5800 kg

M. No.: LNDE002222 Ink Technology: Ultrachrome® Colours: Photo Black, Matte Black, Cyan, Vivid Magenta, Yellow Minimum Droplet Size: 3,5 pl Nozzle Configuration: 360 Nozzles Black, 360 Nozzles per Color Printing Resolution: 2.880 x 2.880 DPI Paper Formats: A0, A1, A2 (42.0x59.4cm), A3+, A3 (29.7x42.0 cm), A4 (21.0x29.7 cm), B1 (72.8x102.8 cm), B2 (51.4x72.8 cm), B3, B4, 17", 24", 44" Print Margins Sheet Media: Mode 1: 3 mm (top), 3 mm (right), 14 mm (bottom), 3 mm (left) Compatible Paper Thickness: 0,08 mm - 1,5 mm Duplex: No Equipment / additional information: with roll holder

Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw

Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw

Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw

COMPOSITION: 01 Motorized roller conveyor/transversal/lifting roller conveyor mm 2,500 x 1,100 for feeding 01 Motorized roller conveyor consisting of mm 18,000x1,100-1,300 for unloading; Packaging dimensions on pallet mm 2,500x1,200; Speed controlled by inverter 01 Automatic wrapper Wraptor Dinamix HS with stretch film H 2.150 mm max. 01 Heating unit for automatic roll cutting 01 Siemens touch monitor and CNC control, hourly output max 40 pallets/h

Pyrolysis furnace ECON EPO 300 Condition: as good as new, only used 10 times

clamping force: 400 kN injection volume: 125 cm³ screw diameter: -- mm platen size: 300 x 300 mm Condition: used, Specification: C-frame injection moulding machine for TPV - second-hand clamping unit: - Clamping unit: vertical - Tonnage: 40 t - clamping force: 400 kN - Heating platen size: 300 x 300 mm Injection unit: - Injection volume max.: 125 cm³ - Connected load: 3x 400 V, 50 Hz 76A fuse protection (incl. peripherals) - Pump output: 7.5 kW, 14.9 A - Total output: 28 kW Dimensions L/W/H approx.: 2,000 x 1,500 x 2,500 mm Weight approx.: 2,250 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tool taper: VDI shaft cross cut: 40 tool taper: Okuma ratio: ? turning speeds: ? U/min : ? coolant: ? Set of tool holders VDI 40 with drive ( 8 pieces ) suitable e.g. for OKUMA box dimensions approx. 500 x 300 x 200 mm weight approx. 50 kg 3 x EPPINGER 4.200.231 drilling and milling head 3 x EPPINGER 4.200.289 drilling/milling head 1 x Drill- Milling head WTO 4 1 06 1 6006 - 40 1 x COROMANT 410 1200 72 - 40 drilling and milling head 1 x 2-jaw chuck KH 1-40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stock number: 3855 ECCENTRIC PRESS Manufacturer: PMB, Type: EPF 64 Machine NO.: 744103, Year of manufacture: 1974 Specifications: Gr. pressing pressure 64 to Table size 520 x 700 mm Stroke length 8-96 mm Projection 265 mm Total power 5.5 kW Control Fabr. Pneumatic clutch. Length: 2000 mm, Height: 2500 mm, Width: 1200 mm, Weight: 4000 kg

Reference Num.: 4149 Brand: EPSON Type: Stylus Pro 7900 Construction year: 2011 Available: directly Status: Not in production Location: Deutschland Equipment: - SpectroProofer - diverse Toner und Verbrauchsmaterialien

tool clamping area: 1 - 32 mm weight: 8 - 12 kg Driven toolholders 1: Eppinger, Mod. 6035-3: 270 Euro 2: Eppinger, Mod. 6052: 360 Euro 3: Eppinger, Mod. 6049-2: 360 Euro 4: Wendel, Mod. A 3930: 720 Euro 5: Eppinger, Mod. 10809-1-3: 720 Euro Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Heinen EPC/II Diana Control EM1 Interface Module (PLC) for Jagenberg Diana Pro. Used and tested. Type: 63430-1.0-000 / SN 155 /

Heinen EPC/II Diana Control BM1 063425-1.0-000 Interface Module (PLC) for Jagenberg Diana Pro. Used and tested.

tool adaptor: VDI 40 weight: . kg material: . Approx. 49 pieces The techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8259 Type: S5-A701S Producer: EPSON Created: 2010 Parameters: Control system: EPSON RC 180 Maximum arm reach: 786 mm Axle number: 6 Machine weight: 36 kg

pressure: 8 t throat: 115 mm stroke: 8-56 mm ram - range of adjustment: 30 mm table surface area: 390x230 mm ram surface: 155x125 mm hole in the table: 105x75 mm table height: 820 mm tool hole in ram: 35 mm weight of the machine ca.: 800 kg dimensions of the machine ca.: 1000x1000x1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Membrane: PVC, 2019. - Stainless steel cage, semi-perforated - Frame: Made of steel, on castors - Mesh size: Stainless steel, Friedrich connection no. 2 40 - Central filling Dimensions: - Length: 3400 mm - Width: 1750 mm - Height: 2300 mm

Cooling unit EPCS -Model: QSI-2-6GE-40Y-H4 -Compressor type: 6F-40.2Y (x2) -Volume: 151.6 m3/h (x2)) -Cooling capacity: 201.8 kW at -5°C/40°C, 166.2 kW at -10°C/40°C, 85.6 kW at -25°C/40°C -Dimensions: 4800 x 2300 x 2250 mm -Number of fans: 4 x 1000 mm -Year of production: 2018 -Quantity in stock: 1 -Condition: used in good condition

Four Neff single-column presses are available. 1) Neff T 6.3, year of manufacture: 1989, output: 3kW. 2) Neff single-column press, operating hours: 9097h. 3) Neff EP 10 single-column press, year of manufacture: approx. 1950. 4) Neff single-column press. On-site inspection is possible.

dishwasher for dishes, Electrolux ELE 506065 type EPPWEASMS, 400 V, 13.5 kW BJ 2018, basket size 50×50 cm, automatic lowering and raising of the hood, 3 washing programs and 1 x continuous washing, self-cleaning cycle, digital display, electrical preparation for automatic washing Washing-up liquid – rinse aid dispenser, original price €17286.00 Dimensions 83x89x176 cm, minus 35% discount

Fine boring head, spindle tool, boring head, bridge tool, fine boring headBoring tool, spindle headBoring tool, spindle headBoring rodReceptacle for bridge tool = SECO - epb GRAFLEX (Made in France) Type A731 200Boring head for bridge tool = SECO - epb GRAFLEX (Made in France) Type A731-010Boring block for bridge tool = SECO - epb GRAFLEX (Made in France) Type A731-500Counterweight for bridge tool = SECO - epb GRAFLEX (Made in France) Type A731-600Tool holder: GRAFLEX Holder size G7 = 46 mmProcessing diameter: 200-280 mmAdjustment accuracy: 0.01

NORDSON control system., Elec: 24 V

A complete packaging and palletizing line for buckets is available. 1) Vollenda 2VNES2-6-E bucket filling machine, year of manufacture: 2009, bucket formats: 2kg-5kg, filling capacity 2kg/5kg: 1200/800 buckets/h. 2) Palletizer Ehcolo EPL 160, year of manufacture: 2009, empty pallet magazine positions: 15, max. pallet dimensions X/Y/Z: 800mm/1200mm/1500mm, palletizing capacity 2kg/5kg pails: 800/1200 pails/h. 3) Wrapping machine Robopac Rotoplat 3000HD, year of construction: 2009, max. rotation speed: 12 rpm, max. wrapping height: 2400mm, power: 11kW, weight: approx. 1400kg. Documentation available. On-site inspection is possible.

Manufacturer: Epilog Model: 8000 Laser System Year of Manufacture: 2017 Mass: 80 kg max Laser Classification: Class 2 Laser Product Vacuum pump: GAST DOA-P725-BN Air filter: vacu Air UML 380 (AD Oracle IQ) Find more here - / Contact us at -

Weight 52 kg Picker from IMM Engel Victory 80/50 Spex

APE gearbox (Dualbox) geabox Type: Planetary Epicenclic Reducer Brand: APE Allen Gears (UK) Reduction Ratio: 2.247:1 Input Speed: 14,210 RPM Output Speed: 1500 RPM Rated power: 860 kW (service: 3355 kW) Type: Epicacyclic (Planetary) Model: APE 43 Reduction Ratio: 2.247:1 Rated power: 860 kW Power in service: 3355 kW Input speed: 14210 rpm Output speed: 1500 rpm

CNC Control, Numeric Control, from GILDEMEISTER GDM 65/2AGILDEMEISTER Type Eltropilot EP20 GD-2ABead 1989Order: 150 299Ser. No.: 0.854.183Power supply: 220 VAC 50 HzRack with 20 module spaces - 11 built-in modulesDimensions W x H x D 480x 260 x 220 mmWeight approx. 7 kgThe control comes from a lathe Gildemeister GDM 42/2A. Further components from the Gildemeister can be found under stock numbers: 60343, 60346, 60347; used

Reciprocating compressor KAESER type EPC 630-250Fabr. No. 1802334 year of construction 1992Volume flow at 6 bar 440 litres/min. Capacity max. 630 litres/min. Pressure capacity 10 barBoiler capacity 250 litersEngine power 3 kWNerg connection 400 Volt, 50 Hz (with 16 Amp. Plug)- 2 cylinders oil-lubricated- Pressure switch set to 10 bar- Runtime from 0 bar to 10 bar Shut-off pressure = 5 minSpace required L x W x H 750 x 700 x 1750 mmWeight approx. 150 kgGood condition; used

SPECIFICATIONS: Installed power: 2.5 HP Machining on both sides at the same time RPM: 12,000 rpm

Key data: 100 t, 3000 mm

Multi axis - Servo electric

Seiko Epson Model LS6-B602S Scara Year of construction 10/2019 Weight 17 kg Max. handling weight 6 kg Equipped with Schunk gripper in very good condition Immediately available from stock.

pressure: 150 t throat: 310 mm stroke: 30-120 mm no. of strokes: 20-60 Hub/min ram - range of adjustment: 90 mm table surface area: 820x600 mm ram surface: 550x430 mm hole in the table: 330x200 mm table height: 750 mm tool hole in ram: Ø50 mm weight of the machine ca.: 9,5 t dimensions of the machine ca.: BxTxH 2500x2500x3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU440W1451 LocationBarneveld MakeChrist TypeEpsilon 2-12D No.12303 Year of construction2006 Main Features MaterialStainless steel Surface0.95 m2 Specified Features - Freeze dryer Freeze dryercheck Cooling surface0,95 m2 Number of plates6 Plate sizes350x450 mm Between the plates85 mm With condensercheck Condenser capacity2x 11,8 l. With cooling compressorcheck Make2x Bitzer TypeS4T-52Y-40P No.1669205890 Year of construction2005 Capacity2x 19,7 m3 Cooling mediumIsceon 89 Motor380-420 volt, 1450 rpm MaterialStainless steel Information Mounted on framecheck With switchcheck Weight850 kg CEcheck Floorspace1,55x1,40 m Total height1,90 m8 Extra SpecificationsWith vacuum pump, control, computersFreeze dryersChristDryers > Freeze dryersBrand > Christ What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new ...

Code: 0028 Brand: OMG Model: EPM/70 Automatic slotting machine for blinds Technical data Spindle connection mm 10 Drill speed 12000 rpm Simultaneous machining of 2 sections 18 possible pitches with a single toothed rod Slots depth up to 25 mm Drill motor Hp 1,5 Slide motor Hp 1 Up to 20 slots / minute Inclination from from 90 degrees (vertical) to 0 degrees (horizontal) Max section dimensions mm 100 x 120 Automatic stop Overall dimensions: machine mm 1500 x 1000 x 1200 h - kg 490 - Rack mm 3200 x 100 x 200 h - kg 30

EPT15H, Model 2022 (purchased April 2023), Electric Pallet Truck, Brand: Maximum; Very little used. 1220 mm; Net weight: 123 kg External charger lI-ion battery Attention: Note the dimensions in the pictures (fork width 680mm)

spindle turning speed range: 750/1500 U/min total power requirement: 2,5 kW turning speeds: 750-1500 U/min thread cutting attachment: tool adaptor: MK4 table surface area: 320x240 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used CNC valve seat processing machine NEWEN EPOC XL. Working range valve seat diameter 13-240 mm. Valve guide working range 4-20 mm. Max. workpiece weight approx. 900 Kg.

Key data: 3 mm, 1050 mm

Notching Machine COMACA type N/EPAS Maxi Sheet thickness: 3 mm Table size: Length 1050 mm x Depth 700 mm Ends tables dimensions: 900 x 470 mm Throat depth: 110 mm Orientable stop Blade length: 225 x 225 mm Voltage: 380 V Total length with ends tables: 2900 mm Length: 1200 mm (with retreated ends tables) Depth: 800 mm Total height: 1100 mm Weight: approx 1 T

PRESS DESIGN   drive system: hydraulic   frame design: C-frame, single sided   table cushion: yes   opening in table: yes PRESS FORCES   total force (nominal): 100 to PRESS TABLE   table surface (left-right): 710 mm   table surface (front-back): 560 mm SLIDE   slide force: 100 to   table surface (left-right): 560 mm   table surface (front-back): 450 mm   spigot hole diameter: 50 mm   stroke: 320 mm   thickness of bolster plate: 150 mm SLIDE (HYDR. PRESS)   approximation velocity max.: 340 mm/s   working velocity max.: 32 mm/s   return velocity max.: 330 mm/s SLIDE EJECTOR / CUSHION   nominal force: 2 to   stroke: 40 mm DIE CUSHION (TABLE CUSHION)   cushion force: 10 to   stroke: 80 mm TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 455 mm STRIP-FEEDER   feeder type: roll feeder   sheet width max.: 300 mm   sheet t ...

Aircooled chiller/heat pump Blue Box Epsilon Echos 16kW/18kW Cooling capacity: 16 kW (12/7 — 35°C) Heating capacity: 18 kW (40/45 — 7°C) Year of manufacture: 2017 Options: heat pump Heat exchanger: plate Refrigerant circuit: 1 pcs. Compressors: 1 pcs. Siam ( scroll, inverter) Type of refrigerant: R410A Number of fans: 2 pcs. Dimensions: 1.10 x 0.70 x 1.40 m Weight: 227 kg Working hours: 268 h Condition: excellent, new

Aircooled Chiller/Heat pump Blue Box Epsilon Echos DK RF HP 26 kW Cooling capacity: 26 kW (12/7 — 35°C) Heating capacity: 30 kW (40/45 — 7°C) Year of manufacture: 2018 Options: Heat pump Heat exchanger: Plate Type of refrigerant: R410A Refrigerant circuit: 1 pcs. Compressors: 1 pcs. Copeland (scroll) Number of fans: 1 pcs. high-pressure Dimensions: 1.30 x 1.15 x 1.60 m Weight: 358 kg Working hours: 3 h Condition: Excellent, new

This ERMAK EPP 1270 x 30 was manufactured in 2010. It features a punching force of 30 tons, a capacity of 6 mm, and can deliver up to 700 strokes per minute. The machine has a motor power of 11 kW and an oil capacity of 300 liters. Dimensions are 4000 mm in width, 4250 mm in length, and 2330 mm in height. Contact us for more information about this machine.

Control system

EPPENDORF Refrigerated Centrifuge Type 5417R, Maximum speed: 14000 min-1 , Elec: 230/4.0 V/A / 50 Hz / 600 W , Maximum product density: 1.2 kg/dm-3, Link to manufacturer: .eppendorf/fr-fr/Boutique-en-ligne-et-Produits/Pointes-tubes-et-plaque s/Tubes-c-WebPSub-H-44515?q=%3Arelevance&selectedResultType=Product&pa ge=1

This 4-axis EPSON LS3-401S robot arm was manufactured in 2018. It features a maximum operating speed of 6000 mm/s for joints #1 and #2, and a payload capacity up to 3 kg. Ideal for tasks requiring high speed and precision, it operates efficiently with a standard cycle time of 0.42 seconds. Consider the opportunity to buy this EPSON LS3-401S robot arm. Contact us for more information about this machine.

This 4-axis EPSON LS6-602S robot arm was manufactured in 2018. It features a 600 mm arm length and can handle payloads up to 8 kg. With speeds reaching 6800 mm/s on joints #1 and #2, and 1100 mm/s on joint #3, it ensures rapid and precise movements. Weighing only 17 kg, its designed for table mounting and includes a 15-pin D-sub electrical connection. Consider the opportunity to buy this EPSON LS6-602S robot arm. Contact us for more information.

Manufacturer: Epson Model: SureColor SC-F6300 Print Specifications - Print technology: On-demand inkjet, PrecisionCore TFP printhead - Maximum print width: 1100 mm (44 inches) - Maximum print resolution: 720 x 1440 dpi - Ink type: Epson UltraChrome DS dye sublimation inks - Ink colours: CMYK (Black, Cyan, Magenta, Yellow) - Ink capacity: 1500 ml per colour - Minimum ink droplet size: 4 picolitre with variable droplet technology - Nozzle configuration: 360 nozzles x 2 rows x 4 colours Connectivity - USB: Hi-Speed USB 2.0 - Network: Ethernet 1000Base-T / 100Base-TX / 10Base-T Find more here - / Contact us at -