137,482 used machines on RESALE, but how to find them? Machine Search
LISTING ID 22412 BRAND: CATERPILLAR MODEL: 3412 POWER: 537 kW - 720 hp 1800 rpm RPM: 1800 CONDITION: Used Running Take Out Features Flywheel housing Governor Exhaust system Cooling system Starter / Panel Engine Mounts Weight (dry): 2459
Crankcase for Mitsubishi S6R-PTA for sale. Year of Make: 2012 Power: 515KW/1500RPM
MITSUBISHI S16R-C2 MPTK (FW) Power: 1700 HP 1600 rpm Features: Flywheel housing,Flywheel,Starter,Governor,Exhaust system,Turbo, Cooling system Engine Specification: 16-cylinder 4-stroke Water-cooled diesel engine With direct-injection, turbocharger Air-cooler Fresh water cooling Bore x stroke (mm) : 170 x 180 Displacement (l) : 65.37 Dimensions (cm): 308.6 x 162.2 x 196 Dry weight (kg) : 6900 Type Approved: Yes
Swing over bed 840 mm Swing over support 530 mm Center distance 2000 mm Spindle bore 82 mm Spindle diameter in front bearing 160 mm Spindle taper - metric 100 Morse Tailstock 6 Maximum workpiece weight at the lowest speed of 6000 kg Largest blade profile 40 x 40 mm Electric motor for headstock drive 18.5 kW Machine dimensions L x W 3420 x 1880 mm Machine weight (according to the spike distance) 5700 kg
LISTING ID: 22764 BRAND:MITSUBISHI MODEL: S12R-MPTA POWER: 880 kW (1180 HP) RPM: 1600 RPM Running Take Out Features: Flywheel housing,Flywheel,Governor,Exhaust system,Turbo,Cooling system,Starter,Water Pump Weight Dry (kg) 5,470 Dimensions (cm) 241 x 158 x 180
Key data: 195 KW, 2300 1/min
Used diesel engine Volvo Penta D7C-B TA identical to Deutz BF6M1013 MC
Key data: 1600 KW, 1500 1/min
Dear Ladies and Gentlemen, We have 2 engines MTU 16V4000 Diesel 1600KW 1500 rpm We have another 2x MTU 20V4000 Diesel 2420KW 1500 rpm Operating hours 260 only and have been regularly serviced. If you have any questions or details, please do not hesitate to contact us. Best regards, Schmidt Mobile: 0172 72 653 24
Key data: 195 KW, 2300 1/min
Used diesel engine Deutz BF6M1013 MC identical to: Volvo Penta D7C-B TA
Center height: 300 mm Center width: 2000 mm Circumferential Ø: over bed 620 mm Spindle bore: 83 mm Spindle mount: size 8 Pick-up cone tailstock: 5 MK Spindle speeds: 14 - 1000 rpm Feeds: longitudinal/flat 0.086-4.842/0.04-2.258 mm/rev Thread pitches: 0.5 - 28 mm Electrical connection: 380/400 V, 15 kW Space requirement: 3600 x 1200 x 1350 mm Weight: 3400 kg
Key data: 89 KW, 1900 1/min
Diesel engine used, with gearbox ZF220 1.5:1 reduced Volvo Penta D5A-B TA identical to Deutz BF4M1013
Key data: 38 KW, 2100 1/min
Scania DC13-313A AT engine completely overhauled only in exchange on request with starter, light nose + belt drive. Engine is completely overhauled ready for installation with 12 months warranty. Old engine must come back to us within 14 days without breakage, cracks and repairable.
turning diameter over bed: 320 mm turning diameter over slide rest: 200 mm turning length: 900 mm turning diameter in the gap: mm turning speeds: 75 - 2000 U/min centre height: 160 mm spindle bore: 50 mm tailstock quill taper MT: 3 MK connected load frequency: 230 V total power requirement: 1,5 kW weight of the machine ca.: 0,29 t dimensions of the machine ca.: 2,0 x 0,8 x 1,56 m Professional lathe 3-jaw chuck 4-jaw chuck faceplate bezel fixed running bezel Quick-change steel holder with 4 cassettes Halogen machine light Chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system feed protection machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 260 mm, 520 mm, 16 U/min
mcm TC 260-105-1500 Premium - Lathe (new) Included premium equipment: - Heidenhain ND5023 3-axis position indicator - 5-position longitudinal stop for the saddle - SRW-Amestra Multifix C quick-change holder with 4 inserts - LED workplace lighting - Set of leveling pads from Spinelli Standard equipment: - Bed, base, headstock, tailstock & sled made of cast iron - Bed guides are induction hardened and ground - Headstock with induction hardened and ground gears - High-precision spindle bearing - Double mechanical coupling - electromagnetic brake - Fast feeds - Pneumatically assisted tailstock movement - Electronic components from Siemens and/or Schneider - Safety devices in accordance with EC standards: plexiglass safety lining guard with microswitch, turret plexiglass safety guard, rear guard along the entire length of the machine, protection of lead screw and feed r ...
Key data: 625 KW, 2 1/min
2x Jenbacher gas engines JMS 312 built in 2008, with brand new generator, exhaust gas heat exchanger next to the engine, additional oil tank. No NOX control. Modules are stored and preserved, location Schleswig, Holstein, modules immediately available, ideal as exchange modules in the event of inspections or fire damage.
Key data: 400 mm
Description Lead and pull spindle lathe VDF Boehringer Göppingen Details Height 1,500 mm Width 1,700 mm Length 4,000 mm without tailstock Bed width 550 mm Bed height 800 mm Bed length 2,000 mm Face Plate Ø 900 mm Forkardt Chuck Ø 500 mm without tailstock, but can be placed Max. workpiece lengths without tailstock 1,500 mm Turning diameter over bed 800 mm Turning diameter over support 640 mm Center height 400 mm 6 pieces of baking 4-fold turning steel holder
Key data: 340 mm
Description Lead and pull spindle lathe VDF Boehringer Göppingen Details Height 1,400 mm Width 1,300 mm Length 4,150 mm Bed width 480 mm Bed height 850 mm Bed length 3,000 mm Face plate Ø 600 mm Forkardt Wedge Bar Chuck Ø 315 mm max. workpiece lengths 2,000 mm Turning diameter over bed 680 mm Turning diameter over support 480 mm Center height 340 mm Drive power 6.5 / 10 kW Lynette Ø 320 mm Multifix holder size C with 5 cassettes
maximum number of results exceeded
please refine your search
