engine used for sale

MARINE GEARBOX Reference number 20148 Brand Gearbox TWIN DISC Model Gearbox MG 518-1 Ratio 5,07:1 Power 600 HP RPM 1800 RPM General condition USED RUNNING TAKEN OUT Status AVAILABLE SPECIFIC INFORMATION SAE Housing SAE-1 Controls MECHANICAL SPECIFIC FEATURES Flexible Coupling : YES 14 Inch flexible coupling Brackets : YES Oil cooler : NO DIMENSIONS 80x120x125 (on euro pallet) Weight (kg)1200 KG

We sell our M.A.N. spare parts stock from our service warehouse here. Enclosed per picture the list of available spare parts. From the screw to the cylinder head. Feel free to take a look and send us your inquiry. You are also welcome to buy the entire stock. Sale under exclusion of any warranty and material defect performance. Shipping: DHL, DHL Express, Freight Forwarder. Request international shipping. Customs fees may apply. English requests are gladly accepted at the international level. In addition, we offer spare parts for various engine manufacturers in the gas engine sector / biogas. The spare parts can be sent to you by express as quickly as possible. This minimizes downtime. Our dedicated sales department with decades of professional experience is at your side with advice and support. This also includes maintenance E40, E50, E60 and even an E70 for MWM engin ...

We sell our M.A.N. spare parts stock from our service warehouse here. Enclosed per picture the list of available spare parts. From the screw to the cylinder head. Feel free to take a look and send us your inquiry. You are also welcome to buy the entire stock. Sale under exclusion of any warranty and material defect performance. Shipping: DHL, DHL Express, Freight Forwarder. Request international shipping. Customs fees may apply. English requests are gladly accepted at the international level. In addition, we offer spare parts for various engine manufacturers in the gas engine sector / biogas. The spare parts can be sent to you by express as quickly as possible. This minimizes downtime. Our dedicated sales department with decades of professional experience is at your side with advice and support. This also includes maintenance E40, E50, E60 and even an E70 for MWM engin ...

1) Make:Cummins Model:NT855G4 ENG.No:2.3216300 Ref No. REB2-02 ALTERNATOR Make:Stamford Type:MHC434E Serial Number:Y3157/02 KVA:325 HZ:60 2) Make:Cummins Model:NT855G4 ALTERNATOR Make:Stamford Serial Number:Y3159/01 KVA:325 HZ:60 RPM:1800 V:440/254 3) Make:Cummins Model:NT855G4 Serial Number:5324 ALTERNATOR Make:Stamford Type:HC1434D Serial Number:0113587/01 Date:Oct-99 KVA:295 HZ:50

From our current stock we sell 7 cylinder heads with the M.A.N item number / spare part number 51.03101.6923. ( New ). Our item number: 58031001. Shipping: DHL, DHL Express, Freight Forwarder. Request international shipping. Customs fees may apply. English requests are gladly accepted at the international level. In addition, we offer spare parts for various engine manufacturers in the gas engine sector / biogas. The spare parts can be sent to you by express as quickly as possible. This minimizes downtime. Our dedicated sales team with decades of professional experience is at your side with advice and support. This also includes maintenance E40, E50, E60 and even an E70 for MWM engines. These maintenance can be carried out on site, except for one E70. Our mobile response team is active nationally and internationally. They bring the necessary tools and know-how. Draw on  ...

Solenoid valve, disc valve, flap valve, electromagnetic valve, solenoid valve, gas solenoid valve -Manufacturer: Kromschröder, gas solenoid valve -Type: MK 5 R3 B2891 -Pmax.: 130 mbar -Voltage: 220/240 V -Dimensions: 375/115/130 mm -Weight: 7 kg

Reference number 20149 Brand MITSUBISHI Model S6A 2 MPTK Power 470 HP RPM 1940 RPM General condition RUNNER ENGINE EXCELLEN CONDITION Status AVAILABLE SPECIFIC INFORMATION Panel Yes including 2 extra panels and 1 alarm panel Governor MECHANICAL Exhaust system DRY Turbo DRY Cooling system Turbocharged, double cooling,charge air cooler directly cooled by seawater. (Intercooler) Starter 24 V Remarks Runnig video available on request DIMENSIONS LxWxH (cm) 178 x 80 x 1,70 Weight (kg) 2100 KG

Motor control, controller -Manufacturer: Phoenix Contact, Mosca Motor Control -Type: EG 45 ME2213 -Number: 12x available -Price per piece -Dimensions: 75/45/H130 mm -Weight: 0.3 kg/pc.

gasoline engine, gas engine, drive engine -1 cylinder -Air-cooled -Engine power: 11 HP -Drive shaft: Ø 35 mm -Dimensions: 450/370/H430 mm -Weight: 35 kg

20152 CUMMINS KTA19-M3 600 HP 1800 RPM 2374N.m @1800r/min BRAND NEW AVAILABLE SPECIFIC FEATURES Panel INCLUDED Raw water pump INCLUDED Expansion tank INCLUDED Heat exchanger INCLUDED DIMENSIONS LxWxH (cm) Weight (kg) 2450mm x 1150mm x 2000mm APPROX 2500 KG

Various engines and attachments to Caterpillar Dozer D4

Pistons 2 pieces Ø 106.5 mm Diesel engine -Piston: Ø 106.5 mm -Piston height: 112 mm -Piston pin: Ø 41.278 mm -Total price: 2 pieces -Weight: 1.4 kg/piece

Pistons 4 pieces Ø 106.5 mm Diesel engine -Piston: Ø 106.5 mm -Piston height: 112 mm -Piston pin: Ø 41.278 mm -Complete price: 4 pieces -Weight: 1.4 kg/piece

Piston 3 pieces Ø 106.5 mm diesel engine -Piston: Ø 106.5 mm -Piston height: 112 mm -Piston pin: Ø 41,278 mm -Complete price: 3 pieces -Weight: 1.4 kg/piece

Speed Control Unit, speed controller, controller, engine governor, motor controller, motor control controller -Manufacturer: Phoenix Contact, Motor control: Motor control controller -Type: ME2213 -Dimension: 130/45/H75 mm -Weight: 0.3 kg

20150 MITSUBISHI S6R2 - PTA 575 kW - 770 HP 1500 RPM Serial Number 82000 General condition BRAND NEW Status AVAILABLE SPECIFIC INFORMATION Flywheel housing Governor Exhaust system Turbo / Aspiration Cooling system Starter Remarks SAE 0 Eelectronic DRY Turbocharged WATER COOLED 24 V BRAND NEW FEATURES Raw water pump DIMENSIONS LxWxH (cm) Weight (kg) 1690 mm x 1077mm x 1578 mm APPROX 2800 KG

Starter motor, diesel engine, drive motor, marine diesel engine, diesel generator -Manufacturer: Bosch, starter motor from MWM RHS 518V16 generator -Type: Bosch 0 001 510 003 -Voltage: 24V 9PS -Teeth: 11 -Dimensions: 445/150/H210 mm -Weight: 26 kg

diesel engine, propulsion engine, marine diesel, injection pump, fuel pump, fuel injection pump, diesel generator, diesel generator -Manifold: from generator MWM RHS 518V16 -Dimensions: see photos -Total dimensions: 800/210/H70 mm -Weight: 8.7 kg

gasoline engine, gas engine, drive engine -Manufacturer: Perkins, gas engine -Type: unfortunately without type designation -Engine power: -Dimensions: see photos -Transport dimensions: 800/670/H980 mm -Weight: 426 kg

Reference number 20153 Brand Gearbox REINTJES Model Gearbox WAF 540 Ratio 3,955:1 Power 660 KW / 885 HP RPM 1650 General condition USED - EXCELLENT CONDITION Status AVAILABLE SPECIFIC INFORMATION SAE Housing SAE 30 Controls MECHANICAL SPECIFIC FEATURES Brackets YES Oil cooler YES DIMENSIONS 80X50X95 Weight (kg) 1000 KG

1998 model 2725 bhp 2005 kw Exwork delivery Aliaga/Turkey caglar@dortelgemi

Speed control unit, speed controller, controller, motor controller, motor control, motor controller -Manufacturer: Oriental Motors, Motor control unit Motor controller -Type: BMUD 120-C2 -Quantity: 1x controller available -Dimensions: 135/60/H100 mm -Weight: 0.4 kg

hydraulic pump with gasoline engine -mobile hydraulic unit -Gasoline engine: JLO L152 -Power: 4.4 KW -Hydraulic pump: Hawe R6.0 -Performance: 4.3 L/min at 1450 rpm, pressure 350 bar

Reference number Brand Model Power 20152 CUMMINS KTA19-M3 600 HP 1800 RPM PEAK TORQUE 2374N.m @1800r/min BRAND NEW AVAILABLE SPECIFIC INFORMATION Flywheel housing Flywheel Governor Exhaust system Turbo Cooling system Starter Remarks Sae-0, Sae-1 18 inch, 14 inch MECHANICAL WET TURBOCHARGED AND AFTERCOOLED WATER COOLED YES- 24 VOLT BRAND NEW SPECIFIC FEATURES Panel INCLUDED Raw water pump INCLUDED Expansion tank INCLUDED Heat exchanger INCLUDED DIMENSIONS LxWxH (cm) Weight (kg) 2450mm x 1150mm x 2000mm

Piston 2 pieces Ø 106.5 mm diesel engine -Piston: Ø 106.5 mm -Piston height: 112 mm -Piston pin: Ø 41,278 mm -Complete price: 2 pieces -Weight: 1.4 kg/piece

20153 CUMMINS 6 CTA 8.3GM 163 kW MARINE DIESEL ENGINE GENERATOR TURBOCHARGED AND AFTERCOOLED WATER COOLED YES- 24 VOLT BRAND NEW SPECIFIC FEATURES Panel INCLUDED Raw water pump INCLUDED Expansion tank INCLUDED DIMENSIONS LxWxH (cm) Weight (kg) 1200mm x 800mm x 1350mm 1300 KG

Brand ZF Model Gearbox Ratio 4.697:1 Power 452 kW RPM 1800 kW/RPM 0.251 General condition New Condition Features: SAE Housing Controls Weight (kg) 632 Dimensions (cm) 80 x 120 x 130

Caterpillar C4.4 - Unused - 69 kW - S1M

Caterpillar C4.4 - Unused - 118 kW - NRP

20154 CUMMINS 4 BTA 3.9GM 50kW MARINE DIESEL GENERATOR UC 1224F BRAND NEW AVAILABLE TURBOCHARGED AND AFTERCOOLED WATER COOLED YES- 24 VOLT BRAND NEW SPECIFIC FEATURES Panel INCLUDED Raw water pump INCLUDED Expansion tank INCLUDED DIMENSIONS LxWxH (cm) Weight (kg) 770mm x 710mm x 793mm 360 KG

Motor Perkins 704.30 # UA80973U857134J completely overhauled replacement engine incl.3.PTO finish without starter + alternator, flywheel. All wear parts renewed incl. Engine test run. 12 months warranty

Caterpillar C32 - Rebuild - 492 kW - SDN

20155 CUMMINS 4 BT 3.9GM 36kW MARINE DIESEL GENERATOR UC 1224C BRAND NEW AVAILABLE TURBOCHARGED AND AFTERCOOLED WATER COOLED YES- 24 VOLT BRAND NEW SPECIFIC FEATURES Panel INCLUDED Raw water pump INCLUDED Expansion tank INCLUDED DIMENSIONS LxWxH (cm) Weight (kg) 770mm x 710mm x793mm 350 KG

Maximum diameter to turn on the bench 2,110 mm Maximum diameter to turn on trolley 1,600 mm Maximum distance between platforms 12,830 mm Spindle hole diameter 155 mm Cone on spindle no. 120 metric Cone on spindle (with reduction) no. 6 clamps Cone on the counterpoint (6-bit reduction) no. 120 metrics Maximum stroke of the counterpoint 400 mm DSeed from the tool support plane to the axis of the 80 mm centers Main engine power 100 HP Spindle speed from 0.9 to 90 rpm with continuous variation Longitudinal feed no. 36: 0.2 to 12.8 Transverse advances No. 36: 0.1 to 6.6 Metric fillets #26: 1 to 42 Whitwoth fillets #17: 0.5 to 11 Quick forwards Maximum permissible load on the tips 50-60 ton Refrigerant liquid system

Reference number 20156 Brand Gearbox REINTJES Model Gearbox WAF 540 Ratio 3,955:1 Power 660 KW / 885 HP RPM 1650 General condition USED - EXCELLENT CONDITION Status AVAILABLE SPECIFIC INFORMATION SAE Housing SAE 30 Controls MECHANICAL SPECIFIC FEATURES Brackets YES Oil cooler YES DIMENSIONS 80X50X95 Weight (kg) 1000 KG

Peak height 2,600 mm Point distance 10,000 mm Closed bench 2,000x6,000 mm To be completed with CNC

20157 TWIN DISC MG 507-1 1.77:1 150 HP 1800 RPM RUNNING TAKEN OUT AVAILABLE SPECIFIC INFORMATION SAE Housing Flexible Coupling Controls Yes 14 inch MECHANICAL SPECIFIC FEATURES Brackets no Oil cooler no DIMENSIONS 55 X 50 X 55 Weight (kg) 144 KG

Height tips 220 mm Useful length 1,000 mm 42 mm bar pass

Turbocharger - AT for M.A.N. gas engines. 51.09100.9658. Refurbished. Shipping: DHL, DHL Express, Freight Forwarder. Request international shipping. Customs fees may apply. English requests are gladly accepted at the international level. In addition, we offer spare parts for various engine manufacturers in the gas engine sector / biogas. The spare parts can be sent to you by express as quickly as possible. This minimizes downtime. Our dedicated sales team with decades of professional experience is at your side with advice and support. This also includes maintenance E40, E50, E60 and even an E70 for MWM engines. These maintenance can be carried out on site, except for one E70. Our mobile response team is active nationally and internationally. They bring the necessary tools and know-how with them. Draw on over 25 years of professional experience. With our modern engine bogie ...

20158 TWIN DISC MG 509 4.50:1 235 HP 1800 RPM RUNNING TAKEN OUT AVAILABLE SPECIFIC INFORMATION SAE Housing Flexible Coupling Controls Sae 1 No MECHANICAL SPECIFIC FEATURES Brackets No Oil cooler - DIMENSIONS 60 X 60X 65 Weight (kg) 260 KG

Equipped with no. 03 guides Overhauled with: guide grinding, CN conversion, new electrical and hydraulic system, hydraulic self-centering installation, shaving conveyor; CN Fagor 8055 Numerical Control – BT Maximum turnerable diameter 1800 mm 3-grife hydraulic self-centering with a diameter of 1450 mm with tightening force 30 Ton with 30 bar clamp L max turnerable 3000 mm Spindle engine power 110 Kw Maximum rotation speed 180 rpm Fast value axles 4000 mm/min M3/M4 Spindle Rotation Inversion Possibility 4 speed ranges Hydraulic counterpoint Maximum capacity of workpiece on counterpoint 12500 Kg It is currently possible to work details of up to 3000 mm length but the extension pallet is available to be able to work details up to 8 m in length. (un revised); Machine installed and working

20159 TWIN DISC MG 509 U 1,45:1 235 HP 1800 RPM RUNNING TAKEN OUT AVAILABLE SPECIFIC INFORMATION SAE Housing Flexible Coupling Controls - No MECHANICAL SPECIFIC FEATURES Brackets No Oil cooler - DIMENSIONS 60 X 60X 80 Weight (kg) 325 KG

Platò diameter: 1300 mm Used lathe in good condition, available unless sold.

Various engines etc. are offered, including the manufacturers NIDEC, VEB, TECO, HEW, Motovario, Krause, SEVA, Cantoni, VEM - partly new - as a complete package. The equipment is currently at our customer's site in Pasewalk and is being sold due to restructuring. Only the offered assets are expressly sold, any items that can be seen in the photos are expressly not part of the scope of the offer. We sell the assets on behalf of our customers. The offer prices are net prices in EURO ex works. Since these are used assets, we sell them without guarantee or warranty as well as the right to take back. The offers are subject to change, subject to errors and subject to any prior sale. Our terms and conditions also apply to every sale, to which we expressly refer.

20160 TWIN DISC MG 518 4.67 :1 580 HP 1800 RPM REBUILT/RECON AVAILABLE SPECIFIC INFORMATION SAE Housing Flexible Coupling Controls Yes - SAE 1 No MECHANICAL SPECIFIC FEATURES Brackets no Oil cooler no DIMENSIONS 100 X 70X 115 Weight (kg) 1200 KG

peak heights: 250 mm point distance: 1500 mm bar pass: 105 mm

20161 TWIN DISC MG 5091 3.82:1 325 HP 1800 RPM RUNNING TAKEN OUT AVAILABLE SPECIFIC INFORMATION SAE Housing Flexible Coupling Controls - No MECHANICAL SPECIFIC FEATURES Brackets No Oil cooler - DIMENSIONS 60 X 60X 80 Weight (kg) 360 KG

Main technical data: - Tip distance: 6000 mm - Tip height: 640 mm - Lathe complete with spindle, tailstock and tool turret

Solar Mars 100 Gas Turbine Engine – 15,000 HP Specifications Manufacturer: Solar Model Mars 100 Year 2019 Power Rating 15,000 HP Fuel Type Natural Gas Configuration Two-Shaft Gas Turbine Emissions Ultra Low SoloNox Condition Used – Engine Only Hours Since Overhaul 20,040 Hours Description Available for sale is a 2019 OH Solar Mars 100 two-shaft gas turbine engine designed for demanding industrial power applications. This unit features Ultra Low SoloNox emissions technology, providing improved environmental performance while maintaining high operational efficiency. The engine has accumulated 20,040 hours since overhaul and delivers a dependable output of 15,000 horsepower, making it an excellent solution for facilities requiring robust and reliable power generation or mechanical drive capability. Designed to operate on natural gas, the Mars 100 offers a cleaner-bu ...