engel 200 used for sale

Key data: 360 , 450 , 400

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Scania Engine: DC 13 72 A (02-13) Engine No.: in production Power: 393 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: S4L1D-G41 Gene. No.: in production Generator power: 450 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Emergency power operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 800 Dimensions of the power unit: Width approx. mm: 1.600 Height approx. mm ...

Key data: 400 , 500 , 400

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Volvo Penta Engine: TAD 1641 GE Engine No.: in production Power: 430 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: HCI 544 C Gene. No.: in production Generator power: 500 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Parallel operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 800 Dimensions of the power unit: Width approx. mm: 1.600 Height approx. mm: 2.460 ...

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Leuco DIA wood router: 200X12/SB11X30 -Speed: 3800 - 6500 rpm -DP222145-80261567 -with: box -Dimensions: 305/305/H40 mm -Weight: 2.7 kg

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Leuco DIA wood router: 200x10/SB9x30 -Speed: 3800 - 6500 rpm -DP222145-80261568 -with: box -Dimensions: 300/300/H80 mm -Weight: 4.1 kg

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: MTU Engine: 12 V 2000 G 26 F Engine No.: 544101778 Power: 709 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Heating oil or diesel B7 Technical data generator: Generator manufacturer: Stamford AvK Generator type: HC 634 G Gene. No.: 23011477 Generator power: 810 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Emergency power operation Switch: Generator switch 4 poles Delivery: Built-in Tank: Execution: Base frame tank with drip pan Content / liter: 990 Dimensions of the power unit: Width approx. mm: 2.050 Height approx. mm:  ...

Execution: Aggregate type: stationary Execution: Contianer 20 Ft. Technical data engine: Engine manufacturer: Volvo Engine: TAD 733 GE Engine No.: in production Power: 201 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Heating oil or diesel B7 Technical data generator: Generator manufacturer: Leroy Somer Generator type: VALLEY 044 M M 6S/4 Gene. No.: in production Generator power: 200 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Emergency power parallel operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 360 Dimensions of the power unit: Width approx. mm: 2.460 ...

Three-jaw chuck, 3-jaw chuck -Chuck size: Ø 200 mm -Passage: Ø 55 mm -Weight: 12.5 kg

Three-jaw chuck, 3-jaw chuck -Chuck size: Ø 200 mm -Passage: Ø 55 mm -Weight: 14 kg

Stopping and stirring machine Rego SM 2000 M with 1 stirring tank and 2 whisks immediately available in stock. -with manual boiler lifting crank -380 volts -with automatic timer -with digital speed control -Machine is completely repainted

Motor for folding machine Eurofold / Foldmaster 235 / 435 / 200 / 400 Art.: PS2356

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Feed size: Ø 200 m -Through hole: Ø 54 mm -Weight: 12 kg

Cutter head, milling chuck, carbide cutter, indexable insert cutter -Diameter: 200 mm -Number of teeth: 12 -Indexable inserts: Carbide -Recording: SK50 -Manufacturer: Kelch -1x SK50 shank for end mill: Ø 40 mm -Weight: 18 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 200 mm -Hole circle: Ø 176/Ø 11 mm -Hole circle: Ø 114/4 x M10 -Dimensions: Ø 200/H20 mm -Weight: 3.4 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: 120 mm -Piston rod: Ø 36 mm -Stroke: 200 mm -Price: per piece -Number: 3 pieces -Dimensions: 755/120/H120 mm -Weight: 20.8 kg

Stock# UG6367 Used stainless steel contact parts planetary mixer by Tonelli, Universal Model P300 (IT). Machine has two agitators and is equipped with three mobile stainless steel mixing pans, each with volume 300 l. Last time used in food industry.

Running weight floor scale 2 to 200 kg, Fabr. Soehnle

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 200 mm -Hole circle: Ø 133 mm -Passage: Ø 20 mm -Weight: 22.1 kg

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -DH: 200x3-III -TGL: 30-2332 -Chuck size: Ø 200 mm -Weight: 16.7 kg

Three-jaw chucks, three-jaw lathe chucks, power chucks -Chuck size: Ø 200 mm -Short taper: 6 -Weight: 25 kg

Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 200 mm -Hole circle: Ø 175 mm -Weight: 21 kg

Hubkneter, Fabr. Diosna Type D200 A

Bread dough dividing machine, W & P, Parta S 2000

Pretzel strand machine , Fabr. Kasper Universe

turning diameter: 330 mm turning length: 510 mm control: FANUC 18i - T turning diameter over bed: 600 mm turning diameter over slide: 550 mm x-travel: 250 mm z - travel: 580 mm y-travel: 100 (±50) mm b-axis: 0.001 mm rapid travel x/y/z: 20/7,5/24/ m/min rapid taverse: B- Achse 20 m/min c-axis: 4.500/ 6.000 ° spindle passage: 76/ 45 mm spindle nose: A2#6 spindle turning speed range: 4.500/ 6.00 U/min spindle drive: 15/ 7,5 kW Turret: 12- fach Stationen Chip coveyor: Inkl. chuck: Hauptspindel 210 mm chuck: Subspindel 160 mm total power requirement: 50,7 kVA weight of the machine ca.: 4,9 t dimensions of the machine ca.: 3.118 x 1.705 x 2.076 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Boiler lifting tipper Kemper HK 200 for Kemper President boiler - Lifting tipper - Manufacturer: Emil Kemper GmbH - Model : HK 200 - with boiler drive and boiler peeling - for Kemper President Kessel

Used RO station by EPURO type RO 2000 PL. New 2017. Technical data: Medium - water, Nominal capacity Q [m3/h] - 2.0, SDI -

Technical data for the shelving rack: Shelving system: Dexion Type: HI280 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 1,340 mm Number of fields / row of shelves: 01 pcs. á 1,290 mm Number of levels plus floor level: 04 pcs. The scope of delivery includes: 02x Shelf stand, used Material color: sendzimir galvanized Frame profile dimensions: 50 x 55 mm Adjustment grid: 25 mm incl. transverse and diagonal struts The stands are pre-assembled 1,200 mm high 610 mm deep 04x Shelves, used Material color: sendzimir galvanized Dimensions: 1,275 x 575 x 30 mm Weight / pcs.: approx. 4,78 kg max. load per floor at evenly distributed load: 120 kg 04x Compensating plates, new Type: HI280 U-PL. STD 42X50X1.2 VZ Material color: sendzimir galvanized 04x Rack trusses, used Total length: 1,275 mm Z-profile: 50 x 25 mm N ...

Clip guide plate 36br and deflector for clipping machine FCA 160 Poly Clip Item Number : Clip guide plate - 200623 Deflector - 162262 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60

Technical data for the shelving rack: Shelving system: Dexion Type: HI280 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 2,630 mm Number of fields / row of shelves: 02 pcs á 1,290 mm Number of levels plus floor level: 04 pcs. The scope of delivery includes: 03x Shelf stand, used Material color: sendzimir galvanized Frame profile dimensions: 50 x 55 mm Adjustment grid: 25 mm incl. transverse and diagonal struts The stands are pre-assembled 1,200 mm high 610 mm deep 08x Shelves, used Material color: sendzimir galvanized Dimensions: 1,275 x 575 x 30 mm Weight / pcs.: approx. 4,78 kg max. load per floor at evenly distributed load: 120 kg 06x Compensating plates, new Type: HI280 U-PL. STD 42X50X1.2 VZ Material color: sendzimir galvanized 08x Rack trusses, used Total length: 1,275 mm Z-profile: 50 x 25 mm Nu ...

Repair service Reparatur Service Part: Axle amplifier type MR-S1-200-E Servo Drive For MAZAK MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Technical data for the shelving rack: Shelving system: Dexion Type: HI280 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 6,500 mm Number of fields / row of shelves: 05 pcs á 1,290 mm Number of levels plus floor level: 04 pcs. The scope of delivery includes: 06x Shelf stand, used Material color: sendzimir galvanized Frame profile dimensions: 50 x 55 mm Adjustment grid: 25 mm incl. transverse and diagonal struts The stands are pre-assembled 1,200 mm high 610 mm deep 20x shelves, used Material color: sendzimir galvanized Dimensions: 1,275 x 575 x 30 mm Weight / pcs.: approx. 4,78 kg max. load per floor at evenly distributed load: 120 kg 12x compensating plates, new Type: HI280 U-PL. STD 42X50X1.2 VZ Material color: sendzimir galvanized 20x shelving trusses, used Total length: 1,275 mm Z-profile: 50 x 25 mm ...

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 200 mm -Hole circle: Ø 133 mm -Passage: Ø 20 mm -Weight: 28 kg

Repair service Reparatur Service Part: Axle amplifier type MR-S11-200-E Servo Drive For MAZAK MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

2000 Ton Sumitomo Hot Forging Press line Year 2006 Stroke 350 mm (13.78") Strokes per min 75 Shut height 850 mm (33.47") SlideAdj. 7 mm (.27") Ram size 1200 mm LR X 1300 mm FB Bed size 1320 mm LR X 1300 mm FB 4 stage transfer system Slide knockout Bottom knockout Scrap System Dual Die Changer Extra Die Shoes Billet Heater and Billet Saw Also Available This line was used by HONDA to make transmission gears, It takes a billet, cuts it to size, heats it to 1300 C then the press hits it 4 times. It can determine good from bad parts, the bad parts get sent to a quench tank, the good parts get sent into a cool down conveyor that you can pick the parts up by hand at the end. The entire system was ran by one operator.

Repair service Reparatur Service Part: Axle amplifier type MR-S12-200-E Servo Drive For MAZAK MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Dematic Conveyor Roller Conveyor 3000/2500/2000/1500/1000-600-540 RA1938 Gravity conveyors - roller conveyors without drive Nominal/outer width (NB): 600 mm Available conveyor lengths (FL): 3000 mm, 2500 mm, 2000 mm, 1500 mm, 1000 mm Further information Manufacturer: Siemens Dematic Type: Roller conveyor Year of manufacture: unknown Condition: good (used) roller width (RB): 540 mm roller pitch: 62,5-125 mm variable drive types: none or head and center drive weight of conveyed material: up to 30 kg The following accessories are optionally available e.g.: Motors with and without frequency inverter of the brand SEW Eurodrive / Movimot. supports side guides Features: condition: new Conveying length in mm: 1000, 1500, 2000, 2500, 3000 Nominal / outside width in mm: 600 Roll width in mm: 540 Roll division in mm: 62,5, 130 Driven: möglich scope of delivery: without supports and side guides F ...

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -DH: B200x3x6 -TGL: 30-2332 -Chuck size: Ø 200 mm -Cone: Ø 104 mm -Hole circle: Ø 132 mm -Through hole: Ø 54 mm -Weight: 15 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 200 mm -Hole circle: Ø 170/4 x M16 -Hole circle: Ø 150/M16 -Dimensions: Ø 200/H159 mm -Weight: 16.3 kg

Description: Type : Oil transformer Finish : Hermetic Make : CG Power System IRELAND LTD. Year of manufacture : 2018 Condition : New Rated Power : 2000 KVA Medium voltage : 20 KV + - 2x 2.5 % (20000V +- 2x 2.5% after 400V Low voltage : 400 V Shifting group : Dyn 5 Frequency : 50 Hz Cooling type : KNAN Gross vehicle weight : 4324 kg Oil weight : 860 Kg Mineral OIL Magpie Length : 1890 mm Width : 1200 mm Height : 1900 mm Other sizes and voltages also available from 100 KVA to 3500 kva. All transformers are tested and in ready-to-use condition and immediately available from our warehouse in 59557 LIPPSTADT. Nationwide delivery. Available for further questions Mon to Sat. 8 a.m. to 10 p.m.

Description: Type : Oil transformer Finish : Hermetic Make : CG Power System IRELAND LTD. Year of manufacture : 2018 Condition : New Rated Power : 2000 KVA Medium voltage : 20 KV + - 2x 2.5 % (20000V +- 2x 2.5% after 400V Low voltage : 400 V Shifting group : Dyn 5 Frequency : 50 Hz Cooling type : KNAN Gross vehicle weight : 4324 kg Oil weight : 860 Kg Mineral OIL Magpie Length : 1890 mm Width : 1060 mm Height : 1900 mm Other sizes and voltages also available from 100 KVA to 3500 kva. All transformers are tested and in ready-to-use condition and immediately available from our warehouse in 59557 LIPPSTADT. Nationwide delivery. Available for further questions Mon to Sat. 8 a.m. to 10 p.m.

x-axis: 350 mm y-axis: 250 mm z-axis: 256 mm U-axis: +/-70 mm V-axis: +/-70 mm dimension of workpiece: 750x550x256 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Data sheet of retrofit POS. GE 20.25 Gebhardt roller conveyor (without drive), FB = 1,260 mm, 2000 mm = FL Type. Gebhardt roller conveyor type 330.01 Year of manufacture: 2007 Order number: 070 113 / 2007 Max. Weight: Gzul. = 30 kg / m Net weight: 25 kg/m = G Length: FL = 2.000 mm Conveyor width: FB = 1.260 mm Overall width B = FB + 60: B = 1,320 mm Side profile: Aluminium Role: Type: G6/50 sliding storage Support roller pitch: 100 mm Support: ask without support, if needed Condition: functional and visually good condition Features: Construction year: 2007 condition: good (used) Conveying length in mm: 2000 Nominal / outside width in mm: 1320 Roll width in mm: 1260 Roll division in mm: 100 Driven: NO scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfa ...

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 200 mm -Hole circle: Ø 132/M16 -Price: per piece -Number: 3 pieces -Dimensions: Ø 200/H51 mm -Weight: 7.9 kg

Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Stroke travel: 75 mm -Piston diameter: 32 mm -Piston rod: 12 mm - Price: per piece - Quantity: 2 pieces -Dimensions: 238/47/H47 mm -Weight: 0.9 kg

Clamping plate with T-slots, tensioning aid, plate field, welding table, welding table, plate boring machine -Width: 200 mm -Length: 1500 mm -Height: 40 mm -Groove width: 14 mm -Weight: 80 kg

Data sheet of retrofit POS. GE 13.25 Roller conveyors, FB = 550 mm Gebhardt, FL = 2.000 mm Type: Gebhardt roller conveyor type 310.01 Year of manufacture: 2007 Order number: 070 113 / 2007 Max. Weight: Gzul. = 30 kg / m Weight: G = 17.5 kg / m Length: FL = 2.000 mm Conveyor width: FB = 550 mm Overall width B = FB + 60: B = 610 mm Side profile: Aluminium Conveyor speed: v = 0,35 m/s Role: Type: G6/50 sliding storage Support roller pitch: 100 mm Drive: motor type W30DT71D4/IS Power: 0.37 kW Speed: 42 Design/wave: M1 B, 20 x 40 Voltage: 230/400 V Power: 1.15 A Support: ask without support, if needed Condition: functional and visually good condition Features: condition: very good (used) Construction year: 2007 Conveying length in mm: 2000 Nominal / outside width in mm: 610 Roll width in mm: 550 Roll division in mm: 100 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Amper ...

Budde roller conveyors, FB = 540 mm, 2000 mm = FL Type: roller conveyors with vertical shaft Weight: 135 kg Length: FL = 2.000 mm Conveyor width: FB = 540 mm Total width: 560 mm Conveyor speed: v = 0.5 m/s Support roller pitch: 75 mm Drive: SEW Power: 0.37 kW Voltage: 230/400 V Support: Including restraints swivel castors with Stoppers Features: condition: very good (used) Conveying length in mm: 2000 Nominal / outside width in mm: 560 Roll width in mm: 540 Roll division in mm: 75 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: 0,5 scope of delivery: including supports with castors and brakes Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit ...

max. turning diameter: 540 mm max. turning length: 1.020 mm bar capacity: 65 mm Spindle speed: 5.000 min -1 driven tools turning speeds: 10.000 U/min control: FANUC 18i-TB Dimensions (L x W x H): 4.520 x 2.300 x 2.600 mm machine weight ab.: 12.000 kg CNC Turning- and Milling Center | DOOSAN - PUMA MX 2000 S equipped with chip conveyor. Additional equipment: + counter spindle + B axis The machine is in good condition. A machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MX2000S | MX-2000 S | MX 2000S | MX2000 S The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Clamping plate with T-slots, tensioning aid, plate field, welding table, welding table, plate boring machine -Width: 200 mm -Length: 1800 mm -Height: 45 mm -Groove width: 11 mm -Weight: 117 kg

Double bench grinder, double grinding machine, pedestal grinder, bench grinder, drill grinding machine -Grinding disc: max. Ø 200 x 32 mm -Speed: 3000 rpm -Engine power: 0.9 kW -Operating voltage: 380 volts -Dimensions: 1100/540/H1140 mm -Weight: 125 kg