engel 200 used for sale

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic piston, air piston -Stroke travel: 200 mm -Piston diameter: 43 mm -Piston rod: 25 mm -Total length: 390 mm -Total length extended: 590 mm -Price: per piece -Quantity: 2 available -Dimensions: 100/100/H390 mm -Weight: 6.5 kg/piece

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 200 mm -Piston diameter: 60 mm -Piston rod: 32 mm -Total length: 425 mm -Total length extended: 625 mm -Price: per piece -Number: 2x available -Dimensions: 150/150/H425 mm -Weight: 12.1 kg/piece

Micrometer, micrometer screw -Measuring range: 200 - 225 mm -without: test piece -Also other sizes: available -Weight: 1.4 kg

Machine name: Continuous horizontal mixer dryer used Manufacturer: AVA / Holland Merten GmbH Type: HTK 200 Year of construction: 2002 Speed: 107 rpm Material: 1.4301 Drive motor: 5.5 kW Hsyqeirqy Version: EExdellCT4 Total capacity: 235 litres Wetted parts: stainless steel 1.4571 Equipment: Double jacket, mechanical seal Dimensions: L 3400 x W 1100 x H 1500 mm Empty weight: approx. 1600 kg Tech. Documentation: Yes Note: Operating temperature 130°C Design temperature 200°C Internal pressure mixer -1/+3 bar Pressure double jacket +6 bar Accessories: Base frame Condition: Used Price: On request

Electric Forklift Manufacturer Still Type R60-20 Year of construction 2005 Duplex mast with full free lift Side shifters Tine adjustment Low operating hours Very good condition Very good battery from year of construction 2019! Hawker Special price

Machine type electrode inverter welding rectifier Brand Alphaweld Type Alphaforce E-200 Supply voltage 1 x 230 volts Setting range 15 – 160 amperes Duty cycle 25 % ED at 200 amps 60% ED at 110 amps 100% ED at 100 amps Current adjustment infinitely variable weldable material thickness 5 mm Cooling inverter by built-in fan Portable assembly system version Fuse 16 Ampere Dimensions L x W x H 280 x 130 x 210 mm Weight 8 kg Age 24 months Condition workshop tested, like new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece electrode cable 1 piece ground cable 1 piece hand shield 1 piece of glass 90 x 110 mm white 1 piece protective glass 90 x 110 mm 10 DIN 1 pair of welding gloves with cuff 1 piece slag hammer heavy version 1 piece steel wire brush 2-row 25 rod electrodes  ...

Electric motor, three-phase motor -Volt: 415 V. -Power: 0.063/0.4 kW -Speed: 460/2840 rpm -Shaft: Ø 17 x 35 mm -Construction: B14 -Protection class: IP 65 -Dimensions: 330/220/H170 mm -Weight: 9 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Chuck size: Ø 200 mm -Passage: Ø 55 mm -Weight: 12 kg

offer 22651 Rotor blade inside belt grinding machine Specifications: - mobile version with motorized forward - reversing + steering -Mot. Grinding stroke forward – reverse with speed regulation - Grinding stroke longitudinally forward + backward -Mot. Contact pressure - grinding pressure regulation - Sanding belt dimensions approx. 2000 x 50 mm - Contact wheel W 60 / D 300 mm - Pneumatic connection 6 bar - Drive 400 V / 2880 rpm / 7 kW - Space requirement approx. W 5700 x H 1200 x D 1400 mm - Weight approx. 800 kg

Emergency generator set 200 kVA Volvo / WA-V 200 S Machine Execution: Unit type: Stationary Design: Soundproofed Technical data engine: Engine manufacturer: Volvo Engine type: TAD 733 GE Engine No.: 5312956418 Motor power: 201 KW Cooling: Water-cooled Power: Electric 12 V DC Speed: 1,500 rpm Fuel: heating oil or diesel B7 Technical data generator: Generator manufacturer: Leroy Somer Generator type: TAL 044 M M 6S/4 Gen.Nr.: 39786300005 Generator capacity: 200 kVA Voltage: 400 / 231 volts Power factor: cos. - phi 0.8 Speed: 1,500 rpm Switchgear: Version: Automatic start Tank: Design: Base frame tank with drip tray Dimensions of the unit: Width approx. mm: 1.200 Height approx. mm: 2.200 Length approx. mm: 3.600 Weight approx. KG: 3.550 Use: Condition: Demonstration machine Year of construction: 2023 Delivery time: immediatel ...

Three-jaw chuck, 3-jaw chuck -Chuck size: Ø 200 mm -Passage: Ø 54 mm -with: base plate -Weight: 26 kg

Three-phase motor, electric motor -Power: 30 kW -Speed: 2945 rpm -Protection class: IP 55 -Construction: B5 -Shaft: Ø 55 mm -Number: 1x available (1x without fan cover and fan disc) -Price: per piece -Dimensions: 760/400/H500 mm -Weight: 237 kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Table surface: 500 x 200 mm -4x T slots: 14 mm -Clamping angle: rotatable, swiveling, tiltable -Foot recording: mm -Dimensions: 500/300/H210 mm -Weight: 50.5 kg

Teigschlagmaschine verwendet. Die Maschine ist nach einer Generalüberholung betriebsbereit. Enthält zwei Stangen und zwei Kessel. Für weitere Informationen kontaktieren Sie mich bitte.

turning diameter: 1040/1900 mm turning length: 2000/3000/1250 mm swing diameter over bed slide: 740 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Make: EST-Ticino type: 520/2000 distance between centers min/max: 2000/3000 mm center height 520 mm Max. turning diameter over bed 1040 mm Max. turning diameter over support 710 mm max. turning diameter/length 1900 x 1250 mm spindle passage 135 mm with 3 jaw chuck with 4-jaw chuck quick change holder in very good and immediately ready condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max diam 250 , max lenght 2000, 3 x heads , change gears

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 0.75 kW -Speed: 3000 rpm -Max. grinding wheels: Ø 200 x 32 mm -Operating voltage: 380 volts -Dimensions: 540/280/H1230 mm -Weight: 116 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Transfer in current condition as seen -Speed: 112/224 rpm -Power: 0.5/0.7 kW -Construction: B3 -Diameter shaft: Ø 24 mm -Protection class: IP 54 -Dimensions: 400/220/H205 mm -Weight: 23 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 200 mm -Passage: Ø 50 mm -one set: hard interchangeable jaws -Weight: 15 kg

TECHNICAL SPECIFICATIONS Designation: Discharge belt Version: stationary Axle distance: 6,000 mm Belt width: 1,200 mm Year of construction: 2006 Drive power: 15 kW Drive type: Plug-on gear motor Support: free supporting structure Catwalk: not available Handover: Transfer hood Belt tension: Tensioning carriage Galvanized version: yes SPECIFIC COMMENT - Exhaust conveyor belt with close upper belt stations - No trough angle / straight load flow

Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 200 mm -hard: interchangeable jaws -Base plate for: machine table -Passage: Ø 54 mm -Weight: 22 kg

Three-jaw chuck, three-jaw lathe chuck -without: interchangeable jaws -Mouth size: Ø 200 mm -Recess: Ø 162 mm -Bolt circle: 3 x 180 mm -Passage: Ø 52 mm -Weight: 13 kg

Vertical lathe MORANDO 2000 for sale Technical data: - X axis: 1600 mm - Axial travel: 900 mm - Turning diameter: 2100 mm - Maximum turning height: 1350 mm - Platform diameter: 2000 mm - Maximum table load: 21000 kg - Spindle power: 75 Kw - Spindle revolutions/minute: 110 rpm

1 HORST KIND label cut and fold machine type UNI 2000 E year 1988

Three-jaw chuck, 3-jaw chuck -Type: DHB 200x3x5 TGL 30 2332 -Mouth size: Ø 200 mm -Passage: Ø 54 mm -max.: 3000 rpm -Short taper mount: Ø 105 mm -Weight: 24 kg

Clamping angle for workpiece clamping -Dimensions: 200/320/H220 mm -Thickness: 25 mm -Groove: 20 mm -Surface: milled -Weight: 22.7 kg

Used SMG HZPUX 350/200 - 1500/1300 moulding press in good condition! Main technical data: - Power: 510 ton - Maximum span with castle: 1460 mm - Minimum light with castle: 520 mm - Maximum span without castle: 2160 mm - Minimum light without castle: 1220 mm

Metronic Romex RFD 2000/4 Type: Stack Material: 20-250my all common materials printable Inking units: 4 Printing ink: Fuel or watercolor Cylinder circumference: from 250mm- 510 mm Cliché thickness: 2.84mm /1.14mm Inking units with doctor blade chambers Material width: 520 Print width: 520 Winder: pneumatic unwinding Dryer: Hot air Side edge controls: 2x BST Railway observation: BST Inline Corona 4,5KW SOFTAL Explosion protection

Function generator, oscilloscope -Frequency range: 0.2 Hz to 240 kHz -Dimensions: 225/225/H85 mm -Weight: 1.2 kg

Workbench, work table, assembly bench -Width: 2000 mm -Depth: 950 mm -Height: 875 mm -Number: 1x drawers -with storage space for a tool trolley -Weight: 108 kg

Electric motor, three-phase motor -Volt: 415 V. -Power: 0.063/0.4 kW -Speed: 460/2840 rpm -Shaft: Ø 17 x 35 mm -Construction: B14 -Protection class: IP 65 -Price: per piece -Number: 3x available -Dimensions: 395/210/H190 mm -Weight: 7 kg

Ball Mill Vollrath EFC 200 Wet and dry grinding Ferrous grinding with steatite balls Lining hard porcelain Capacity 200 l Drive power 1.4 kW Speed 42 1/min 3 ball mills each mounted on steel structure Very good operational condition, directly from production!

turning diameter: 235 mm turning length: 200 mm turning speeds: 6500 U/min control: Siemens 840D swing diameter: mm turning height: mm workpiece height max.: 100 mm spindle bearing diameter: 90 mm spindle head: A5 total power requirement: 41 kW weight of the machine ca.: 6500 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Piston: Ø 50 mm stroke: 200 mm -Piston rod: Ø 20 mm -Quantity: 1x available --Dimensions: 65/65/H580 mm -Weight: 4.2 kg

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 200 mm -Piston diameter: 80 mm -Piston rod: 22 mm -Total length: 445 mm -Total length extended: 645 mm -Price: per piece -Number: 2x available -Dimensions: 96/96/H445 mm -Weight: 6.6 kg

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic piston, air piston -Stroke travel: 200 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm -End position damping: adjustable on both sides -Dimensions: 54/54/H400 mm -Weight: 2.2 kg

The scope of delivery includes: 01x Shelf connector, used Material color: blue Manufacturer: Feralco for shelf spacing: approx. 200 mm Total length: approx. 200 mm Profile abm.: approx. 20 x 20 mm Headstock: approx. 100 x 40 x 4 mm Borehole Ø: approx. 9 mm (2 pcs per side) Weight: approx. 0.41 kg | Pcs.

Pneumatic cylinder, air cylinder, standard cylinder -Stroke: 200 mm -Piston: Ø 50 mm -Piston rod: Ø 20 mm -Dimensions: 65/65/H450 mm -Weight: 3 kg

Arburg 520C-2000-800 (193) Description with conveyor belt, bimetallic screw General Information SKU: 193 Availability: In stock Year of construction: 2005 Brand: Arburg Specifications Injection weight: 434 g Clamping force: 2,000 kN Screw diameter: 55 mm Spray pressure: 1650 bar Tie bar spacing: 520x520 mm Clamping plate size: 728x728 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 44.9 kW Operating hours: 80000 h Weight: 7300 kg Dimensions: 6x2 m Funnel: No Core train: Yes Euromap: Yes

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 200 mm -Piston diameter: 50 mm -piston rod: 16 mm (connection M16 x 1.5 thread) -Total length: 383 mm -Total length extended: 583 mm -Price: per piece -Number: 1x available -Weight: 1.35 kg

MEMBRANE SKINNER, MAJA, MODEL: EVM 2000 Technical description: Serial number: 38280 Power supply: 380 V, 3 Ph, 50 Hz, 2.2 A, 0.75 kW Working widht: 420 mm Dimensions: 700 X 700 X 1000 mm

Lathe Manufacturer: Schaerer Model: UN 200 Center distance: 1600mm

Stop, depth stop, length stop for miter saw, pull saw... -Receiver: Bosch profile -Length Unit of measurement: 2000 mm -Price: complete -Dimensions: 2215/100/H1000 mm -Weight: 10 kg

geared motor, electric motor -Speed: 40.5 rpm -Power: 0.55 kW -Design: B5 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Dimensions: 445/230/H210 mm -Weight: 26 kg

Slotting machine Elmass for wedge tracks from 2.5-14mm. Thanks to the bore-guided tool, even extra-long keyways can be pushed. Tools for standard holes of 6-50mm and groove widths of 2.5-14mm are available. Wedge tracks in blind holes are also possible. Multiple wedge tracks thanks to the 400mm rotary table are feasible.

Gear motor, electric motor, three-phase motor -Speed: 19.5/78 rpm -Power: 0.1/0.4 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 54 -Dimensions: 410/220/H210 mm -Weight: 21.9 kg

Gear motor, electric motor -Speed: 20.5 rpm -Power: 0.37kw -Type: B5 -Diameter shaft: Ø 30 mm -Protection class: IP 65 -Number: 1x motors available -Price per piece -Dimensions: 500/230/H220 mm -Weight: 31kg

Gear motor, electric motor -Speed: 65 rpm -Power: 0.55 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Brake: 24 V -Protection class: IP 65 -Number: 1x geared motors available -Price: per piece -Weight: 31 kg

Mazak Integrex 200 lll S + GL 150 F CNC turning-milling center with second spindle CNC control Mazatrol PC Fusion CNC 640 MT PRO Turning diameter 550/660 mm Turning length 1016 mm Spindle bore diameter 65 mm Spindle speed 35-5000 rpm X-axis travel: 580 mm Y-axis travel 160 mm Z-axis travel: 1045 mm B-axis travel: 225 ° mm C-axis indexing 360° Spindle nose A2-6 Tool cone Capto C6 Number of tools in the magazine 40 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail.

Hand lever scissors, hand tin snips, tin snips, sheet metal snips -Hand lever shears -Material thickness: max. 2 mm -Blade length: 200 mm -Dimensions: 790/540/H1715 mm -Weight: 28 kg