engel 1000 used for sale

sheet width: 1030 mm plate thickness: 12.0 mm thickness at Niro-steel: 8.0 mm blade length: 1050 mm cutting angle: 3.0 Grad no. of strokes: ca. 10 Hub/min back stop - adjustable: 500 mm Control: konv. table height: 900 mm operating pressure: max. 280 bar oil volume: 150 l engine output: 11.0 kW weight: 1900 kg range L-W-H: 1550 x 1150 x 1600 mm Machine from a maintenance workshop (!) Furnishing: - heavy / robust electro-hydraulic sheet metal plate shears - Machine body in a closed design as an all-steel welded construction - Knife upper cheek slides in a long downward direction over the knife edge . protruding plastic guides - Cutting is done hydraulically via two hydraulic cylinders - The upper beam returns to its starting position in two ways . Spring batteries on the side stands - manual back gauge, adjustable from the rear Adjustment by handwheel, with mm scale - manual cutting gap ...

grinding diameter: 450 mm grinding length: 1000 mm centre height: 225 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Photo of machine already delivered in similar scope: -major maintenance -New table geometry -partial painting of the interior grinding wheel equipment LEFT 400x63x127mm (standard) grinding wheel equipment RIGHT 300x40x127mm Internal grinding unit Ø120mm for HF spindles CNC control KELCO 120 C-axis for non-circular grinding. Kel-Poly B-AXIS: CNC-controlled B-axis KELCO 120: v constant 35m/s or 45m/s High-frequency internal grinding spindle Operating unit for MFV and MFZ spindles Hydraulic quill retraction for the tailstock NO micro-adjustment on the tailstock Spring-loaded quill insert Top table cooling Standard workpiece headstock MK 5 DIN 55026 size 5 Micro-adjustment for the standard workhead Dressing device ...

Fat baking system Reimelt EL6-1000 with filling station - Manufacturer: Reimelt - Model: EL6-1000 - Material: Stainless steel - 6 rows - Analog control - Hourly output: approx. 1000 pcs/h depending on the product - Automatic turning station - With filling station Dimensions: Length approx. 490cm Widest point approx. 130cm Highest point approx. 170cm Further pictures and information are available on request.

max. wheel diameter: 1000 mm gear width: 180 mm max. module: 7 min. module: 0,5 min. ram stroke: 16 mm max. ram stroke: 180 mm table hole: 160 mm total power requirement: 4 kW weight of the machine ca.: 5,2 t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 450 mm grinding length: 1000 mm centre height: 225 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.The machine will be delivered overhauled. Mechanical overhaul: • Overhaul of the entire machine according to Kellenberger measuring protocol • A new service-friendly cabin • Repainting Electrical overhaul: • New, modern CNC cylindrical grinding machine control system • New built up control cabinet • New drive technology • Exchange of all electric lines, Berus pressure switch, etc. • New absolute glas scales in X- and Z- axis • New absolute rotary encoder (for B-axis) Please remark ...

Key data: 660 mm, 983 mm

CONTROL PANEL FANUC F31-IA5 AXIS MOVEMENT X 750 MM / Y ± 210 MM / MM / Z 1.220 MM ROTARY AXIS MOVEMENT B + / - 120 ° / C 360 °/ 0.001 ° MAX. TURNING DIAMETER 660 MM MAX. TURNING LENGTH 983 MM SPINDLE - 1 CHUCK SPİNDLE SPEED 3.000 MIN/-1 CHUCK DIAMETER 12 INC / 315 MM BAR CAPACITY 90 MM TOOL SPINDLE SPEED ( S1 ) 12.000 MIN/-1 TOOL HOLDERS CAPTO C6 NUMBER OF TOOL POSITION 100 SPINDLE - 2 SPİNDLE SPEED RANGE SUP SPİNDLE 3.000 MIN/-1 CHUCK DIAMATER SUP SPINDLE 12 INC / 315 MM WEIGHT OF THE MACHINE 22.300 KG DIMENSIONS OF THE MACHINE 5.33 X 3.27 X 2.93 M

pressure: 100 t chamfer lenght: 4100 mm distance between columns: 3700 mm column arm: 415 mm stroke: max. 215 mm dayligth: 410 mm ajustment speed: 200 mm/sec working feed: 10.0 mm/sec return speed: 150 mm/sec work height max.: 1080 mm table width: 100 mm Control: CYBELEC oil volume: 160 ltr. voltage: 400 V power capacity: 8.5 kW weight: 10200 kg range L-W-H: 4800 x 1800 x 2600 mm Equipment: - BEYELER electro-hydraulic CNC press brake - CNC CYBELEC control unit DNC 1200 PS/B” High-resolution screen Clear, concise menus in the operators language Tool and product library Swiveling control panel, front right - CNC-controlled axes (Y1+Y2-X) - CNC-controlled backgauge adjustment (X-axis) 2x manually adjustable stop fingers - Manual upper tool clamping - Manual lower tool clamping - Rear safety device (safety door) - Side safety device (safety doors) - Bending tools 1x set of split uppe ...

A high-performance circular shear Aryma for series production of discs and rings made of sheet metal is available. Material thickness: 3mm, max. disc diameter: 150mm, max. square sheet disc diameter: 1000mm, max. octagonal disc diameter: 1250mm, cutting speed: 70m/min, cutting roller diameter: 70mm. Machine dimensions X/Y/Z: approx. 2000mm/1000mm/1750mm, weight: approx. 1500kg. An inspection on site is possible.

A two-component injection molding machine Krauss Maffei Multinject is available. Clamping force: 3500kN, platen dimensions X/Y: 1280mm/1190mm, second unit: 390CZ. Machine dimensions X/Y/Z: approx. 6300mm/2000mm/3100mm, weight: approx. 17000kg, control: Krauss Maffei MC4, operating hours: 78424h. The control is defective. Documentation vorhanden. An on-site inspection is possible.

An Inkjet printer Citronix is available. Image height: 12mm, image resolution vertical/horizontal: 50DPI/100DPI, number of print lines: 4, printing performance: 304m/min, spray distance: 25mm. Documentation available.

grinding length: 1000 mm centre height: 180 mm length: 3600 mm width: 1650 mm height: 1800 mm weight of the machine ca.: 3,7 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Powder machine Fabikat PEKU with 1000 mm passage width for powdering top and bottom for Plates, profiles, hoses, etc.

Dimensions (L/W/H): 1500x700x1600 mm Weight: 900 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1300x680x1580 mm Weight: 400 kg Total power requirement: 2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1500x700x1600 mm Weight: 900 kg Total power requirement: 1,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2200x2600x1800 mm Weight: 2000 kg Total power requirement: 9 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 8421x2250x2250 mm Weight: 5500 kg Total power requirement: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 8900x3700x2500 mm Weight: 8300 kg Total power requirement: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2750x1800x2200 mm Weight: 2500 kg Total power requirement: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1560x1180x1350 mm Weight: 1500 kg Total power requirement: 20 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1300 kN, 475 g/PS, 55 mm

Technical data: Clamping force: 130 t Year of Make: 2008 Shot weight: 475.9 g Injection unit: 1000 Screw diameter: 55 mm Specific injection pressure: 1904 bar Displacement: 523 cc Clamping platens (dimensions): 745 x 745 mm Clear width (spar dimension): 470 x 470 mm Ejector force: 22.6 kN Tool installation height (min.): 300 mm Opening travel: 600 mm Max. panel spacing: 900 mm Weight: 8000 kg Control: MC5

material width: 250 mm material thickness: 2 mm diameter: 1200 mm total power requirement: kW weight of the machine ca.: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

With 1 piece HD pump Bings Marple 8/25 up to 175bar and 4 pieces airless spray guns Krautzberger KAA1300. Machine equipped with change-over valve for quick color change, lever switchable to max. 3 color circles and 1 rinsing agent pump (options). In Ex-version. Machine is ready for demonstration at the warehouse in Blomberg. - Producer Ka-Ma - Type KR BM 1000 B - Year of construction 2023 - Working width 1.200 mm - Single gun drive system - Dry filter system - Transport belttransport System - Feed speed adjustable 2 - 8 m/min - Lacquer reclaiming system with v-belt - Gun control system SPS, LS - Number of installed lacquer circles 3 Stk. - Number of installed spraying guns 4 Stk. - quick change system for spraying guns - spray gun type Krautzberger KAA1300, Airless - Airless spraying system - Height adjustment for spraying guns 150 mm - Producer lacquer pump Binks Maple 8/25 bi ...

Transnorm Rising falling Incline belt conveyor with leading belt GF 5800+1000-600-600 RA2454 Technical data: Conveyor length (NL): 6800 mm ( 5800 mm riser segment + 1000 mm forerun) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,35 Drive: SEW gear motor, Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 6800 ( 5800 + 1000 ) Nominal / outside width in mm: 600 Belt width in mm ...

turning diameter: 1010 mm turning length: 6000 mm control: Siemens type: Sinumerik 840D turning diameter over slide rest: 650 mm 3-jaw chuck: Schunk Rota Plus 3-jaw-chuck diameter: 500 mm bed width: 750 mm steady: 820 mm Rotating speeds: 1100 U/min length of gap: 500 mm steady: 450 mm spindle passage: 104 mm workpiece weight: 7000 kg main drive: 52 kW turning speeds: 5-900 U/min total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m Serial number: 262/01 Machine number: 08122394 Quick-change tool post Coolant system Monitor Chip conveyor The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessorie ...

turning diameter: 1010 mm turning length: 6000 mm control: Siemens type: Sinumerik 840D turning diameter over slide rest: 650 mm 3-jaw chuck: Schunk Rota Plus 3-jaw-chuck diameter: 500 mm bed width: 750 mm steady: 450 mm Rotating speeds: 1100 U/min length of gap: 500 mm steady: 450 mm spindle passage: 104 mm workpiece weight: 7000 kg main drive: 52 kW turning speeds: 5-900 U/min live tooling: total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m Serial number: 262/01 Machine number: 08122394 Quick-change tool post Coolant system Monitor Chip conveyor The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items ...

x-travel: 10000 mm y-travel: 1500 mm z-travel: 3000 mm Control: Heidenhain TNC 430 tool taper: ISO 50 spindle turning speed - stepless: 10 - 3000 U/min feed range: 10000 mm/min rapid traverse: 15 m/min main drive motor: 37 kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC-control HEIDENHAIN TNC 430 40-station ATC NC-Universal Milling head, automatic positioning (A/B axis 0.001 / 0.001 deg) Chip conveyor Optional (price upon request): CNC rotary table Juaristi 3000 x 3000 mm - Table load 30 to - Longitudinal movement 2000mm - Separate CNC-control FAGOR The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 1220 mm turning length: 5000 mm control: FAGOR 8055 TC swing diameter over bed slide: 880 mm spindle bore: 160 mm spindle turning speed range: 0 - 1000 U/min transmission ratio: 4 tailstock quill diameter: 180 mm tailstock quill stroke: 260 mm main drive motor: 40 kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m In 2020 overhauled: - Grinding of carriage guides on the X and Z axes - Preloading of X and Z axis ball screw nuts - New Turcite placed on the X and Z axis carriages - General review and disassembly of the engine and head regulator - General review and disassembly of the motors and regulators of the X and Z axes - Disassembly and inspection of the SAUTER tool holder - Checking and cleaning the electrical cabinet - Complete review of the hydraulic circuit CNC-control FAGOR 8055 TC Tool turret SAUTER 4-jaw chuck Ø  ...

Round feeder for dosing difficult-to-flow materials, trough diameter: 950 mm, trough height: 800 mm, trough capacity: approx. 0.5 m³, plate diameter: 1,200 mm; discharge via 3-arm soil agitator with wall-mounted scraper and adjustable pusher / weir. Drive via SEW adjustable gear motor with 5.5 kW. Workshop overhauled in 2017 by Belgian specialist company, not used since then.

Size: 100x140 cm Equipments: Max. Load capacity: 1000 kg

BIHLER resistance welding system consisting of: 1 BIHLER B 1000 welding control 2 welding transformers 2 x 64 kVA Welding power: 2 x 64 kVA Connection voltage: 400 V 50 Hz

bar lathe Takamaz XY 1000 Technical specifications Fanuc CNC Model CNC Version 16 ASA 5 main spindle nose Main spindle power 7.5 Kw Main spindle bar passage 42 mm Turning diameter 190 mm Turning length 395 mm Number of main spindle speeds 5000 Number of Tool Turrets 2 Number of tool positions first turret 12 Number of Motorized First Turret 12 First turret X-axis travel 162.5 mm Y-axis travel first turret + - 30 mm Z-axis travel first turret 450 mm Number of tool positions second turret 12 Number of motorized second turrets 12 Second turret X-axis stroke 160 mm Z axis travel second turret 450 mm Fast feed rates linear axes X Y Z 24 m/min Sub-spindle yes ASA 5 spindle nose Number of sub-spindle revolutions 5000 Power against spindle 5.5 Kw Z stroke sub-spindle 475 mm Model and brand bar feeder iemca Boss 545 E Belt chip conveyor Basic Informatio ...

pulling force - max.: 6.3 t max. ram stroke: 1000 mm max. workpiece diameter: 60 mm Control: Siemens 840 D total power requirement: 99 kW weight of the machine ca.: 10 t dimensions of the machine ca.: 4 x 5 x 6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Motorized tailstock - CE-Chuck cover protection - Telescopic guide cover over guideways - Steady rest  - 4 chuck 1000 mm diameter - 3 chuck 500   mm diameter -   - 2 Axis digital read out system

Punching force: 1000 kN Projection: 760 mm For example, punch a 40 mm hole in 22 mm steel Stroke release via foot switch Quick-change device Range of tools is included in the price 3000 kg

Sawmill with log band saw with flywheel 1000 mm Attachment to clamping carriages with pliers

Ball transfer table 2000-1007-1000 RA2407 Technical data: Year of manufacture: unknown Condition: good (used) dimensions: 2000x1000 distance balls: 55 mm row, with 75 mm pitch Height: 800 mm - 900 mm Scope of delivery: including feeds Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Key data: 2500 kN, 476 g/PS, 55 mm

1.0 St. gebr. Injection Molding Machine Manufacturer: KRAUSS MAFFEI Type: KM250-1000CX Year of Make: 2017 Clamping force: 250 tons Spar spacing 630 x 630 mm Screws DN: 55 mm Max. displacement: 523 cm³ Moulded part weight: 476 g/hp Control: MC6 Equipment: 2 pcs core train Interface Robot 12-way hot zone channel control Interface temperature control unit

Offer 24204 Technical data: - Largest turning diameter over bed 420 mm - Center width 1000 mm - Spindle bore mm - Mounting cone of the tailstock quill MK 4 - Travel of the tailstock quill 200 mm - Spindle speeds 40 - 2000 rpm - Feeds longitudinal + flat - Metric thread pitches - Inch thread - Module thread - Drive 400 V - with: - 3 jaw chucks - SWS steel holder with 3 inserts - Space requirement approx. W 2800 x H 1250 x D 950 mm - Weight approx. 2200 kg

Inv. Num. : 8881 Type: PRO-1000 A Producer: Hartford Generated: Parameters: Control system: FANUC Work table length: 1150 mm Work table width: 600 mm Maximum spindle speed: 8000 1/min X-axis travel: 1000 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Machine weight: 6000 kg Equipment: Tools

x-travel: 1020 mm y-travel: 510 mm z-travel: 510 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC control Heidenhain 4. axis electronical hand wheel 20-fold automatic tool changer chip tank Technische Daten / technical details: Verfahrweg X / X-Travel 1020 mm Verfahrweg Y / Y-Travel 510 mm Verfahrweg Z / Z-Travel 510 mm Tischgröße / table size 1200x450 mm Werkzeugschaft / spindle taper BT40 Drehzahlbereich / spindle speed 8000 UpM /rpm Anzahl der Werkzeugplätze / tool places in ATC 20 Gewicht der Maschine ca. / weight ca. 5000 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hommel Rotormat 1000 Leftover Bread Chopper Univeral Chopper - Universal shredder - Suitable for chopping fresh or dry leftover bread - Suitable for grinding breadcrumbs, fruits, nuts - Clad in stainless steel Technical data: - 380V / 50Hz - Motor 3kW - Dimensions: 65x90x145cm (W x D x H) The Hommel Rotormat 1000 universal shredder is characterised by its efficiency and reliability. It is primarily suitable for chopping vegetables, but is also used for chopping light and dark leftover bread (leftover bread chopper). In addition, it can be used to make breadcrumbs, crush nuts (before roasting) and vegetables, grate frozen cheese and spices, and grind grains and grains. More information and pictures on request.

General SKU356X825 MakeA. Berents TypeRW 1000 No.011/6-469 Year of construction1993 Mounted on legscheck Pressure Working pressure2 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume1435 Ltr. Motor35 KW Specified Features - Processing vessel MaterialStainless steel 1.4552 Closed stirring vesselcheck Capacity1434 l., (1000 l.) Vessel sizesDia. 1500x1300 mm Dished bottomcheck ManholeDN1500 Top connectionscheck OutletDN80 With jacketcheck volume 77 l. Max. temperature133°C With homogenisercheck Motor23 kW, 380 volt, 3500 rpm Information LocationBarneveld Floorspace1,90x1,55 m Total height3,00 m Extra SpecificationsWith pressure vessel, volume 41 l. pneumatic hood lifter Drive for scraper will be included Processing vesselsA berents GmbH & co kgProcessing vessels > Processing vesselsBrand > A berents GmbH & co  ...

Fabricante :GURUTZPE Modelo :A-1000 4G X 5.000 Año :2003 CNC :SIEMENS SINUMERIK 840 D Capacidades y avances: Altura de centros :450 mm. Distancia entre puntos :5.000 mm. Recorrido carro transversal :530 mm. Recorrido carro longitudinal :5.000 mm. 3º guía de apoyo para el carro :INCLUIDO Volteo máximo sobre bancada :900 mm. Volteo máximo sobre carro transversal :650 mm. Anchura bancada :970 mm Avance rápido ejes X / Z :10 m/min Cabezal: Revoluciones del cabezal :0-1.600 rpm Nº de gamas automáticas de cabezal :2 Potencia motor principal :28/34 kW Paso de barra de cabezal :105 mm. Torreta: Tipo torreta :SAUTER 0.5.320.025 Posiciones torreta :4 Tamaño herramientas :280x280 mm. Contrapunto: Diámetro de la caña del contrapunto :140 mm. Eje W - contrapunto motorizado controlado por CNC :INCLUIDO Equipamiento adicional: Puerta delantera :INCLUIDO Pr ...

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Teilüberholte Maschine mit Messprotokoll nach Neumaschinentoleranz NEUE Steuerung Eckelmann ENC mit BEMA Schleifsoftware KEL-ASSIST für Kelco 90 numerisch gesteuerte B-Achse Innnschleifrinrichtung Dia 80mm Schleifscheibe links Durchmesser 400mm Schleifscheibe rechts Durchmesser 300mm Innenschleifspindel HJN 828 hydraulischer Reitstock Mikroverstellung KEL SET Messsystem The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1000L Vessel Horizontal stainless steel Manufacture: Mueller (NL) Year of Manufacture: 2013 Diameter Approx 1000mm Height Approx 1100mm (including motor) Length Approx 2400mm Stainless Steel Single Skin Bottom Outlet DIN Butterfly Valve Working Pressure 3bar Pressure Gauge Stainless Steel Cradle/Frame with Four Legs Second Hand This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

Type: RTC-DA-032-1000 HC - MBM , Aventics, Rodless Pneumatic Cylinder , Dimensions _1240 , W- 105, H-84mm , New. 12kg with Rexroth guide rails, P-max: 8 bar, piston force 500N, Carriage 170x100mm, 3 T-slots, Several pieces, price on request per number of pieces. NP: approx. 1400,-

Inv. Num. : 8902 Type: Vesta 1000 12K Producer: Hwacheon Created: 2016 Parameters: Control System: FANUC Series Oi-MF Hours: 15976 h Work table length: 1100 mm Work table width: 502 mm Spindle drive power: 11 kW Maximum spindle speed: 12000 1/min X-axis travel: 1000 mm Y-axis travel: 550 mm Travel Z axis: 500 mm Cone: BT40 Max. tool length: 300 mm Max. tool weight: 8 kg Max. tool diameter: 80/150 mm Rapid traverse X/Y/Z: 36/36/30 m/min Machine height: 2670 mm Machine length: 3335 mm Machine width: 2200 mm Machine weight: 6500 kg Equipment: Tool probe Workpiece Probe 4th axis TSUDAKOMA

WORKING RANGE, Longitudinal (X) 1250 mm, Vertical (Y) 1000 mm, Transversal (Z) thread axis 380 mm, Drilling depth (V) 1000 mm, Drilling head inclination ( C) +/-20 °, Table rotation (B) 360,000x0.001 °, Workpiece approach (W) 500 mm, CNC, Measuring system optical scales, CNC SELCA 4040D, DRILLING UNIT, Min-max diameter from solid 5-40 mm, Spindle power 10 Kw, Rotation speed 4.200 Rpm, Drilling type gundrill, Drilling head inclination ( C) 40 (+/-20) °, FEEDS, X rapid 10 m/min, Y rapid 10 m/min, Z rapid 10 m/min, V rapid 10 m/min, TABLE, Surface 1000x800 mm, Resolution (B axis) 0.001 °, Tilting +/- 22,5°, Capacity 4.000Kg / d, COOLANT SYSTEM, Tank capacity 650 l, EXTRA, Total installed power 30 Kw, Machine weight 17.500 Kg, Machine dimensions 5000x2600x3300 mm, Information about technical data are not binding., Machine available subject to prior sale.

Transnorm Rising falling Incline with arch and forerun belt conveyor 1000+10700+1000-600-500 RA2459 Technical data: Conveyor length (NL): 12700 mm (1000 mm forerun + 10700 mm incline + 1000 mm arch ) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,5 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 12700 ( 1000 + 10700 + 1000 ) Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodr ...