emo used for sale

Maximum temperature 1100 C, Interior 400 x 200 x 400 mm more info on request

3 EMOD electric motors are for sale for Degussa chamber furnaces type GKU ... 2 type 132S / 6 unused with the following performance parameters: Power: 2.2 KW Speed: 970 Flange: d = 250mm Protection class: IP 54 1 pc.type 132S / 4 unused with the following performance parameters: Power: 4 KW Speed: 1.430 Flange: d = 250mm Protection class: IP 54 Sold without warranty or guarantee!

Three-phase motor, electric motor -Power: 1.9 kW -Speed: 2800 rpm -Shaft: Ø 18 x18 mm -Construction: B14 -Protection class: IP54 -Dimensions: 355/115/H150 mm -Weight: 15 kg

Three-phase motor, electric motor -Transfer: in the current condition as seen -Slight damage: on the fan housing -Power: 1.9 kW -Speed: 2800 rpm -Shaft: Ø 18 x18 mm -Construction: B5 -Protection class: IP54 -Dimensions: 360/140/H150 mm -Weight: 16.7 kg

New 250 KW 294 KVA water-cooled three-phase motors EMOD WKASYG 315L4-700 (5 pieces) for sale. 4.500 € for each generator plus VAT. FCA freely charged in D-Bergisch Gladbach. Brand: EMOD Type: WKASYG 315L4-700 Year of construction: 2018 Voltage: 400 V rpm: 1510/ min Engine number: 8359010 Weight: 2.322 kg Rated voltage: 400 D Rated current: 425 A Rated power 250 kW/ 294 KVA Operating mode: S1 Engine protection: KALTL. : 3155°C Design: B3 Wave: 80170 KLK location: 0° Protection class: IP55 Frequency (Hz): 50 Condition: Completely new

Three-phase motor with 2 speeds, electric motor -Power: 2.7/3.3 kW -Speed: 1420/2850 rpm -Design: B5 -pole-reversible -Protection class: IP 54 -Dimensions: 355/250/H200 mm -Weight: 27 kg

Technical data of the used Calandra Sertom EMO 31-25: - Upper roller table length: 3100 mm - Side roller table length: 3100 mm - Upper roller diameter: 400 mm - Side roller diameter: 350 mm - Maximum opening between rollers: 75 mm - Maximum load on the upper roller: 1950 KN Roller rotation speed: 2,5-5 m/min Weight: 17000 kg Machine dimensions: 5800x2350x1800 (H) mm

power capacity: 50 / 65 kW volt: 220 V ampere: 181/230 A weight of the machine ca.: ? t dimensions of the machine ca.: ? m (passend für Kutter MEISSNER RSM 200) n 1460/2940 min-1, iP 23 Temperature sensor for motor protection + tropically insulated The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Car wash VAIOCS 1G Max. tool dimensions ... 530x320x200mm Max. workpiece weight ... 70kg Machine weight... 3000kg L x W x H ... 2800x1750x2400mm Cleaning process - solvent immersion degreasing alternatively with ultrasound -Immerse - Intermediate drying - Steam degreasing - Vacuum drying Electrical power: Heating capacity 33 kW Motor power 13 kW Cooling capacity approx. 15 kW Power consumption approx. 51 kW / 90 A Operating voltage 400 V / 50 Hz / 3/N/PE Compressed air approx. 6 bar

Three-phase motor, electric motor -Power: 1.5 kW -Speed: 2820 rpm -Shaft: Ø 24 x 30 mm -Construction: B14 -Protection class: IP 54 -Dimensions: 300/230/H170 mm -Weight: 13.1 kg

Three-phase motor, electric motor -Power: 9.2 kW -Speed: 2900 rpm -Shaft: Ø 38 x 60 mm -Construction: B5 -Protection class: IP 54 -Number: 3x available -Price: per piece -Dimensions: 450/310/H257 mm -Weight: 55 kg

General SKU300X420 LocationBarneveld MakeEmo TypeFPAC 800 No.EMO 1467 47-57-30-16 Year of construction2007 Dimensions Cake capacity630 Pressure Working pressure15 Bar Main Features MaterialPolypropylene Pressure15 Bar Surface46 m2 Specified Features - Filterpress Filter presscheck Filter surface46 m² Number of platens45 and 2 end plates Internal platen sizes730x730 mm External platen sizes800x800 mm Platen thickness60 mm Cake capacity630 l. Central inletcheck Hydraulic closingcheck With hydraulic unitcheck Automatic openingcheck MaterialPolypropylene Information Total height3,0 m Weight6000 kg CEcheck Floorspace6,0x1,75 m Extra Specificationsthis machine is equipped with plate cleaner. with :recessed plates. FilterpressesEMOFilters > FilterpressesBrand > EMO What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compar ...

sheet width: - mm plate thickness: - mm distance between columns: - mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

An agitator, presumably from the manufacturer Stelzer, with an Emod motor is available. Agitator shaft: 70mm, operating tank volume: 200m³, operating medium: milk, motor power: 12.5kW, speed: 980rpm, power factor: 0.70. An on-site inspection is possible.

Electric motor, three-phase motor -Power: 5.5 kW -Speed: 2870 rpm -Shaft: Ø 38 x 70 mm -Construction: B5 -Price: per piece -Number: 2x available -Dimensions: 455/326/H250 mm -Weight: 56 kg

Manufacturer: Engel Model: Emotion 440/160 Year of Manufacture: 2018 Max. installation height :460 mm • Center support package • Max. closing force :1600 kN Cylinder size: 40 mm • Screw CRN coated • OptiShut backflow preventer • max. spray pressure 1940 bar • Injection volume 55-220 cc Max. injection weight :174 g Operating hours: 33526 h Equipment: • 1 core pull incl. auxiliary unit • Plasticizing cylinder set, highly wear-resistant design • Needle valve nozzle • E-Flomo • IQ weight control • IQ Clamp control • EM 63 interface • separate water and electricity connections Find more here - / Contact us at -

brake motor, electric motor, three-phase motor -Power: 0.25 kW -Speed: 2800 rpm -Shaft: Ø 11 mm -Design: B14 -Protection class: IP 54 -Quantity: 2 available -Price: per piece -Dimensions: 275/122/H185 mm -Weight: 6.6 kg

Electric motor, three-phase motor, brake motor -Power: 0.45 kW -Speed: 1300 rpm -Shaft: Ø 14 mm -Brake: 6 Nm -Construction: B3 -Protection class: IP 54 -Number: 1x available -Dimensions: 300/190/H145 mm -Weight: 8.7 kg

Electric motor, three-phase motor, brake motor -Power: 0.45 kW -Speed: 1300 rpm -Shaft: Ø 14 mm -Brake: 6 Nm -Construction: B3 -Protection class: IP 54 -Foot damaged, see picture -Dimensions: 300/190/H145 mm -Weight: 8.7 kg

Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Speed: 22.5 rpm -Performance: TA = 120 Ncm -Shaft: Ø 30 x 105 mm -Protection class: IP 54 -Number: 1x available -Price: per piece -Dimensions: 350/290/H195 mm -Weight: 22 kg

Electric motor, three-phase motor -Power: 0.12 kW -Speed: 1500 rpm -Shaft: Ø 14 x 30 mm -Construction: B14 -Flange: Ø 105 mm -Protection class: IP 54 -Price: per piece -Number: 3x available -Dimensions: 245/187/H140 mm -Weight: 6.5 kg

geared motor, electric motor -Speed: 66 rpm -Power: 0.55 kW -Design: B5 angle -Shaft diameter: Ø 25 mm -Protection class: IP 54 -Number: 1x motor available -Price: per piece -Dimensions: 420/250/H195 mm -Weight: 20 kg

Three-phase motor, electric motor -Power: 16 kW -Speed: 980 rpm -Shaft: Ø 55 x 110 mm -Design: B3 -Protection class: IP 54 -Dimensions: 750/480/H400 mm -Weight: 223kg

Three-phase motor, electric motor -Transfer in current condition as seen -Foot is broken in one place -Power: 3.5/14 kW -Speed: 730/1470 rpm -Shaft: Ø 42 mm -Construction: B3 -Protection class: IP 54 -Price: per piece -Number: 1x available -Dimensions: 620/390/H310 mm -Weight: 130 kg

Gear motor, electric motor, three-phase motor -Speed: 95 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 54 -Dimensions: 390/210/H180 mm -Weight: 16.7 kg

Electric motor, three-phase motor -Power: 5.5kW -Speed: 1730 rpm -Shaft: Ø 28 mm -Construction: B35 -Protection class: IP 54 -Number: 1 piece available -Dimensions: 420/340/H265 mm -Weight: 64kg

Three-phase motor with 2 speeds, electric motor -Power: 1.7/7 kW -Speed: 720/1450 rpm -Shaft: Ø 38 mm -Construction: B3 -pole changing -Protection class: - -Dimensions: 480/330/H270 mm -Weight: 74 kg

Three-phase motor with 2 speeds, electric motor -Transfer in current condition as seen -Power: 3/11 kW -Speed: 720/1450 rpm -Shaft: Ø 42 mm -Construction: B3 -pole changing -Protection class: IP 54 -Price: per piece -Number: 1x available -Dimensions: 600/390/H320 mm -Weight: 108 kg

Adjustable geared motor, variable speed geared motor, electric motor -Motor manufacturer Emod Type: EEDF71L/4 -Transmission manufacturer Nord Type: SK12-71L/4E -Motor power: 0.37 kW -Speed: 45 rpm -Design: B3 -Drive shaft: Ø 25 mm -Protection class: IP 54 -Dimensions: -Weight: 17.4 kg

Gear motor, electric motor, electric gear motor -Manufacturer: Emod, gear motor type SK400SUF-63L-4/2 -Speed: 175/356 rpm -Power: 0.15/0.19 kW -Shaft: Ø 14 x 60 mm -Protection class: IP54 -Dimensions: 300/170/H180 mm -Weight: 10.6 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Manufacturer: Emod, electric motor type 132 S/4 -Speed: 1460 rpm -Power: 5.5 kW -Voltage: 380/660 V -Design: B5 -Shaft: Ø 38 x 80 mm -Dimensions: 450/340/H300mm -Weight: 65 kg

Geared motor, electric motor, three-phase motor, electric geared motor -Manufacturer: Emod, electric motor type 132S/2A -Power: 7.5 kW -Speed: 2880 rpm -Design: B5 -Shaft: Ø 38 x 65 mm -Protection class: IP 54 -Number: 7x available -Price: per piece -Dimensions: 447/310/H250 mm / 450/340/H270 mm -Weight: 51 kg / 63 kg

Geared motor, electric motor, three-phase motor, electric geared motor -Manufacturer: Emod, electric motor type 132S/2 -Power: 5.5 kW -Speed: 2870 rpm -Design: B5 -Shaft: Ø 38 x 65 mm -Protection class: IP 54 -Dimensions: 450/256/H310 mm -Weight: 43 kg

Geared motor, electric motor, three-phase motor, electric geared motor -Manufacturer: Emod, electric motor type 132 S/2AB -Power: 9.2 kW -Speed: 2900 rpm -Design: B5 -Shaft: Ø 38 x 65 mm -Protection class: IP 54 -Number: 4x available -Price: per piece -Dimensions: 450/256/H325 mm -Weight: 66 kg/piece

Geared motor, electric motor, electric geared motor -Speed: 3/25 rpm -Power: 0.07/0.55 kW -Brake -Design: B14 -Shaft diameter: Ø 20 mm -Protection class: IP 54 -Weight: 38 kg

electric motor, three-phase motor -Power: 1.1 kW -Speed: 1390 rpm -Shaft diameter: 24 mm -Design: B3 -Protection class: IP 54 -Weight: 13 kg

electric motor, three-phase motor -Input: 415 volts -Power: 55 kW -Speed: 2950 rpm -Shaft diameter: 60 mm -Design: B5 -Protection class: IP 54 -Dimensions: 930/600/H610 mm -Weight: 380 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 1.5 kW 2770 rpm at 50 Hz -Hole: Ø 30 mm -Motor mounted on guides -Number: 2x motors available -1x: right-hand thread -1x: left-hand thread Price: per piece -Weight: 20 kg/piece

Gear motor, electric motor, three-phase motor, electric gear motor -Manufacturer: Motor EMOD type EEDF 65S/4 -Manufacturer: Gearbox Getriebebau Nord type SK.5301 SU-63 S/4 ED -Speed: 4.1 rpm -Power: 0.12 kW -Construction: hollow shaft angle -Diameter shaft: 20 mm -Protection class: IP 54 -Dimensions: 360/135/H190 mm -Weight: 15 kg