emc used for sale

The machine is in good technical condition, testing is possible by prior arrangement. control system: SINUMERIK 828D Movement in X/Y/Z axes: 1200 / 600 / 500 mm Distance between table and spindle end: 100 - 600 mm Number of axes: 3 Rapid traverse in X/Y/Z axes: 30 m/min Working feeds X/Y/Z: 0 - 15 m/min Clamping area: 1300 x 630 mm Maximum table load: 1500 kg Tool change Number of tool stations: 30 Maximum tool diameter: 80 mm Milling spindle Maximum speed: Mechanical spindle 10,000 rpm, motor spindle 15,000 rpm Maximum torque: mechanical spindle (S6) 100 Nm, motor spindle (S6) 100 Nm Dimensions (length x height x width): 3370 x 2950 x 3000 mm Machine weight: 12000 kg

control: 840D-PCU 50 V1 : 3 coolant: ja chip conveyor: ja kW generator - rated current: 110 A connected load: 56 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

With C axis Swing over bed Ø 610 mm Swing over slide Ø 360 mm Distance between centers on tailstock version 682 mm Maximum turning diameter Ø 500 mm Maximum part length 520 mm Maximum bar diameter Ø 65 Travel in X / Z 260 / 610 mm Spindle speed 5000 rpm Number of tool on turret 12 Tool holder type VDI30 Controller FANUC Oi TF

Key data: 340 mm, 2000 mm

Emco Emcomat E-300 2-Axis Teach-In/Cycle-Controlled CNC Lathe CNC control Fagor 8055 i Power TC Turning diameter 340/570 mm Turning length 2000 mm Center height 275 mm Spindle diameter 108 mm Spindle nose D 1-8 Spindle speed 0-2,500 rpm X-axis travel 310 mm Travel Z-axis 2000 mm If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

Control Heidenhain TNC 620 Travel X/Y/Z: 350 x 250 x 300 mm Spindle speed 12,000 min-1 Round and swivel table Tool magazine for 20 Wkz. ISO 30 Chip conveyor LANG Automation EcoCompact 10 Approx. 100 tool holders ISO 30

For sale Emco CNC double spindle lathe type Hyperturn 45. A very complete CNC lathe with left and right spindle, as well as an upper and lower turret. Both turrets have driven tool positions! The upper turret also has a Y-axis with 70 mm travel. Tool holder attachment VDI25, rod capacity left spindle is Ø 45 mm, maximum speed 7,000 rpm. Maximum diameter is Ø 300 mm. Maximum part diameter is 480 mm. The distance between the two spindles is 720 mm. Fanuc 18i-TB control. The machine is equipped with high pressure pump, chip conveyor with right ejection, parts catcher, manual collet devices, etc. Available from stock, subject to prior sale. The machine has a light layer of soot. This can be easily removed.

Inv. Num. : 8871 Type: Emcomill E 1200 Producer: EMCO Created: 2011 Parameters: Control system: Fanuc Switch-on hours: 28317 h Operating hours: 12114 h Work table length: 1340 mm Work table width: 650 mm Maximum table load (uniform): 1500 kg X-axis travel: 1200 mm Y-axis travel: 610 mm Travel Z axis: 500 mm Machine height: 3060 mm Machine length: 3200 mm Machine width: 3350 mm Machine weight: 10000 kg 2025: New Z-axis motor Spindle overhaul

Cutting height 160 mm Cutting width 380 mm Table size 400 x 460 mm Table inclination up to 45 Wheel diameter 220 mm Motor 1 HP - 750 watt Weight approx. 45 kg

turning diameter: mm turning length: mm control: 0 total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This Emco VMC 300 Vertical Machining center was manufactured in the year 2003 in Austria. It is equipped with a SIEMENS SINUMERIK control unit.

This 4-axis EMCO Maxxturn 65 lathe was manufactured in 2005. It features a Siemens 840 D control system, a 12-position turret with all driven tools, and a tool holder VDI 30. The main spindle operates up to 5000 rpm, while the counter spindle reaches 7000 rpm. It includes a Hainbuch collet chuck, parts catcher, and a chip conveyor. A great opportunity to buy this EMCO Maxxturn 65 lathe. Reach out for more information.

EMCO Hyperturn 45 - CNC lathe - Main spindle equipped with full-clamping cylinder (operation with bar feeder not possible or loading and unloading via automatic. Swivel loader, see video) - Year of construction 2011 Technical data Working Range: - Maximum circumferential diameter over bed: 430 mm - Circumferential diameter over face slide: 300 mm - Maximum turning diameter: 300 mm - Maximum part length: 480 mm - Maximum bar passage: 45 mm - Distance main spindle - counter spindle (spindle lugs): 720 mm Carriage travel range: - Carriage travel X / X2: 160 / 150 mm - Carriage travel Z / Z2 / Z3: 510 / 510 / 510 mm Main spindle (spindle 1): - Spindle connection - DIN 55026: KK 5 - Spindle bore: 53 mm - Spindle bearing (inner diameter): 85 mm - Maximum mass inertia for clamping device and workpiece: 0.08 kgm² Main spindle clamping system: - Hollow clamping cylinder ...

This 7-axis EMCO HYPERTURN 665 MC PLUS lathe was manufactured in 2005. It features twin spindles, twin turrets, and a maximum turning diameter of 600 mm. Equipped with a SIEMENS 840D CNC, it offers spindle speeds up to 5000 rpm and a bar passage diameter of 65 mm. Additional features include a LNS MOVE bar loading magazine, high-pressure coolant system, and air-conditioned control cabinet. For more information about this lathe, please reach out to us.

Vertical machining center Emco FAMUP MCX 750-1200 with IKZ 40bar Year of Make: 2007 Control: Fanuc 21i Running hours: 8,500h Chip Blaster High Pressure System - Max. speed 8,000 min. • Tool magazine with 24 magazine slots (ISO 40), • Tool holder ISO 40 - 24 Tightening bolts ISO 40 • Standard paintwork: Red – Grey – Black • Spindle is prepared for high-pressure cooling (port A) • Threading without compensating chuck • Central lubrication system • Chip removal from the housing via a wash-down device • Rinsing gun for cleaning work area, clamping devices, parts • Coolant device with 3 adjustable nozzles • Coolant tray 500 l • Spindle blow-out device for cleaning the holder during tool change • Lighting of the work area by halogen lamp 24 V • Two-color alarm lamp TECHNICAL DATA MCX 750 Axis X - longitudinal: 750 mm Axis Y  ...

This 6-axis EMCO Hyperturn 65 Powermill G2 was manufactured in 2022. A highly productive CNC turn-mill center, it features a main spindle and subspindle both with a max torque of 250 Nm and speeds up to 5000 rpm. The milling spindle offers up to 12000 rpm. Includes a 40-position tool magazine, 12-position turret, and advanced Sinumerik ONE control system. If you are looking to get high-quality turning and milling capabilities consider the EMCO Hyperturn 65 Powermill G2 machine we have for sale. Contact us for more information.

This 6-axis EMCO Hyperturn 665MC Plus turn-mill centre was manufactured in 2008. It features a multi-axis CNC system with Y-axis and B-axis for complete machining of turned and milled parts. Equipped with integrated spindle motors on both main and counter spindles, it offers a spindle speed up to 5000 min-1 for the main and 7000 min-1 for the counter spindle. Includes a 24-position tool magazine and SINUMERIK 840D control. If you are looking to get high quality turning and milling capabilities consider the EMCO Hyperturn 665MC Plus machine we have for sale. Contact us for more information about this machine.

This 3-axis EMCO MaxxTurn 65 SMY was manufactured in 2014, featuring a robust FANUC 31i B control system and a dual spindle setup with C and Y axes for complex machining. It includes a 12-position tool turret and a bar feeder with a capacity of 65 mm diameter and 3200 mm length. Ideal for precision turning and milling, this machine offers a comprehensive solution for advanced metalworking. Contact us for more information about this machine.

CNC machining center Emco, type VMC 600, built in 1998 incl. handwheel + 3 vices with clamping device

This 3-axis EMCO FamUp MCP 100-50 vertical machining center was manufactured in 2007. It features a Siemens 840-D control system, a 2-fold pallet changer, and a 30-fold tool changer with holders. The machine includes a screw chip conveyor and a fully protected cabin with safety doors. Ideal for operations requiring a table load up to 600 kg and speeds up to 10,000 rpm. Reach out for further details regarding this vertical machining center.

This 3s EMCO Concept Mill 105 was manufactured in 2016. It features a maximum spindle speed of 5000 rpm and a spindle motor power of 1.1 kW, providing efficient machining capabilities. The machine has a table size of 420 × 125 mm and a maximum table load of 10 kg. If you are looking to get high-quality milling capabilities, consider the EMCO Concept Mill 105 vertical machining centre we have for sale. Contact us for further details.

Milling machine, universal milling machine, tool milling machine, drilling and milling machine -Manufacturer: EMCO, milling machine with digital display and hydraulic clamping -Clamping table: 800 x 400 mm -Clamping table: rotatable/tiltable/swivelable -Travel range X/Y/Z: 600/400/400 mm -Spindle mount: SK40 with hydraulic clamping Accessories: incl. 9 tool holders (see photos) -Speeds: from 63 - 3150 rpm -Feed rate X/Y: 16-800 mm/min -Feed Z: 8-400 mm/min -Quick stroke: 100 mm -Rapid traverse X/Y: 2000 mm/min -Rapid traverse Z: 1000 mm/min -Coolant system: yes -Dimensions: 1740/1670/H1940 mm -Weight: 2200 kg

This 4-axis EMCO Emcomill EM 1200 was manufactured in 2021. It features a TNC 620 HEIDENHAIN control, a 15,000 rpm spindle, and a SK40 tool carrier. The machine offers X-1200, Y-610, Z-500 strokes and supports a maximum workpiece weight of 1500Kg. With 32 tools and 3300 operating hours, consider the opportunity to buy this EMCO Emcomill EM 1200 vertical machining centre. Contact us for more information.

Find more here - / Contact us at -

This 3-axis EMCO MILL E350 was manufactured in 2019, featuring advanced Siemens control for precise operations. Ideal for complex milling tasks, this vertical machining center ensures reliable performance. Consider the opportunity to buy this EMCO MILL E350 vertical machining center. Contact us for more information.

x-travel: 380 mm z-travel: 140 mm dist. cutter spindle - workpiece spindle: 370 mm distance spindle - column: 163 mm table-size: 630 x 150 mm quill stroke: 40 mm milling head -swivable: 360 Grad spindle turning speed range: 120-2000 U/min table feed: 35/65/170 mm/min voltage: 380 V weight of the machine ca.: 130 kg total power requirement: 0,5 kW dimensions of the machine ca.: 0,91 x , 0,68 x 1,80 m Includes 32-piece collet set Includes base cabinet with key Includes small parts Includes operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tool milling machine Emco FB3 Movements in X-Y-Z = 300-200-350 mm spindle with quill ISO-30 ISO-30 horizontal spindle Angle head swivels by ±90° Feed and rapid traverse in X and Y Angle table 600 x 180 mm Digital display Heidenheim ND780 Year of Make: 2006 Cleaned and tested

Main spindle: Technology: Motor spindle Speed: 4,000 rpm Power (max.): 29 kW Torque (max.): 250 Nm Bar Passage: 76 mm Sub-spindle: Technology: Motor spindle Speed: 5,000 rpm Power (max.): 29 kW Torque (max.): 250 Nm Ejector: Pneumatic Travel in Z: 800 mm Tool carrier I (X/Y/Z): Technology: 12-station turret Tool holder: VDI30 Tool drive: 5,000 rpm, 6.7 kW, 25 Nm Travel in X/Y/Z: 260/100/800 mm Rapid traverse in X/Y/Z: 30/12/30 m/min Tool carrier II (X/Z): Technology: 12-station turret Tool holder: VDI30 Tool drive: 5,000 rpm, 6.7 kW, 25 Nm Travel in X/Z: 210/800 mm Rapid traverse in X/Z: 30 m/min Equipment/accessories: Chip management: Chip conveyor Coolant management: IKZ system with paper belt filter and high pressure, 40 bar Raw material feed I: Robot interface prepared Raw Material Feed II: Bar Feeder Interface Prepared Finished part removal ...

Horizontal turning machine manufactured in 2011. These EMCO TURN E25 features a maximum turning diameter of 85 mm and a turning length of 225 mm. Includes a VDI 16 disk turret with 12 tool stations and a maximum chuck size of 100 mm. If you are looking to get high-quality turning capabilities, consider the EMCO TURN E25 machines we have for sale. Contact us for further details. 2 units available.

Description Electric stacker Jungheinrich Swift model EMC – factory-tested Load capacity 1000 kg Integrated charger with 230 V plug Lifting height: approx. 160 cm Overall height: approx. 200 cm Battery voltage 24 V

Horizontal turning machine manufactured in 2014. These EMCO TURN E25 features a maximum turning diameter of 85 mm and a turning length of 225 mm. Includes a VDI 16 disk turret with 12 tool stations and a maximum chuck size of 100 mm. If you are looking to get high-quality turning capabilities, consider the EMCO TURN E25 machines we have for sale. Contact us for further details. 2 units available.

Lathe beds, unused Compakt 5 , Compakt 8, Compakt 11, Super 11, Interchangeable Wheels , Other EMCO Parts: Clamping tables, angle tables, steady rests, lathe spindles, milling spindles, ...

- Universal milling machine with toolmaker precision  - Small-batch production to complex workpieces - Vertical milling head with hydraulic tool clamping Y and Z Milling - Handwheel in all three axes - Linear guideways in all three axes - Workspace guard retractable with large chip shield - Main motor with spindle brake  -  

EMCO Hyperturn 65Year of manuf. : 2017 Control : Siemens 840Dsl Turning diam. : 500 mmTurning length : 800 mm____________Description:Mainspindle:Technology:MotorspindleSpeed:4.0 00 rpmPower (max.):29 kWTorque (max.):250 NmBarcapacity:76 mmSubspindle:Technology:MotorspindleSpeed:5.000 rpmPower (max.):29 kWTorque (max.):250 NmEjector:PneumaticMovement in Z:800 mmToolcarrier I (X/Y/Z):Technology:Turret with 12 stationsTaper:VDI30Tooldrive:5.000 rpm, 6,7 kW, 25 NmMovement in X/Y/Z:260/100/800 mmEilgang in X/Y/Z:30/12/30 m/minToolcarrier II (X/Z):Technology:Turret with 12 stationsTaper:VDI30Tooldrive:5.000 rpm, 6,7 kW, 25 NmMovement in X/Z:210/800 mmEilgang in X/Z:30 m/minEquipment/Accessory:Chipmanagement:Chip conveyorCoolingmanagement:Internal cooling unit with paperbeltfilter and High-pressure, 40 barRawmaterialfeed I:Robotinterface preparedRawmaterialfeed II:Barloaderinterface prepa ...

- Universal milling machine with toolmaker precision  - Small-batch production to complex workpieces - Vertical milling head with hydraulic tool clamping Y and Z Milling - Handwheel in all three axes - Linear guideways in all three axes - Workspace guard retractable with large chip shield - Main motor with spindle brake  -  

x-travel: 300 mm y-travel: 200 mm z-travel: 350 mm feed power: 160 kp speed: 20 - 200 mm/min rapid traverse: 1200 mm/min total power requirement: 1,4 kW weight of the machine ca.: 0,45 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: EMCO Model: MC 120-60 Year of Manufacture: 2008 Type of Machine : Machining Center Spindle hours: 10,459 CNC Control: Fanuc 18i-MB Tool holder: SK40 Condition: Used, fully functional Axis Travel - X axis: 1,200 mm - Y axis: 600 mm - Z axis: 500 mm - 4th axis: Yes, installed - 5th axis: No Equipment and Features - Tool magazine: 30 positions - Band filter: Yes - Chip conveyor: Yes - SK40 toolholder package included - Fully operational Lang Eco Compact 10 automation system with 10 vices included - Custom-built slatted loading rack for ergonomic loading and unloading of machine and - automation Find more here - / Contact us at -

Manufacturer: EMCO Maxxmill 350 Model: Maxxmill 350 Year of Manufacture: 2017 Type of Machine : Milling Center Spindle hours: 11,000 CNC Control: Heidenhain iTNC620 HSCI Spindle: ISO30, 12,000 rpm, 33 Nm, 7 kW 4th axis: Yes 5th axis: Yes Automation system: Lang Eco Compact 10 - fully operational and pre-configured Condition: Used, fully functional Axis Travel - X axis: 350 mm - Y axis: 250 mm - Z axis: 300 mm Equipment and Features - Tool magazine: 50 positions - Chip conveyor: Yes - Band filter: No - Pallets: No - Comprehensive ISO30 toolholder package included - Lang Eco Compact 10 automation system - fully operational and pre-configured, included - Custom-built workspace cover - special manufacture, included Find more here - / Contact us at -

Inv. Num. : 9029 Type: TURN E65 Producer: EMCO Created: 2008 Parameters: Control system: FANUC Max. turning diameter: 500 mm Maximum turning diameter over bed: 610 mm Maximum length of travel in the X-axis: 210 mm Maximum length of travel in the Y-axis: 40 mm Maximum feed in the Z-axis: 610 mm Weight: 6500 kg

turning diameter: 550 mm turning length: 1500 mm control: Fagor 8055 x-axis: 108 mm z-axis: 3000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 280 mm turning diameter over slide rest: 170 mm turning length: 600 mm weight of the machine ca.: 400 kg spindle passage: 26 mm speeds: 55-2000 U/min total power requirement: 1,4 kW dimensions of the machine ca.: 1,5 x 0,8x 1,3 m Including EMCO SOD grinding support Including EMCO 4-jaw chuck Including machine feet Including change gears The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A CNC universal tool milling machine Emco is available. Travel X/Y/Z: 450mm/300mm/350mm, table dimensions X/Y: 800mm/400mm, speed: 2500rpm, tool holder: SK40, quill stroke: 100mm, milling head swivel: +/-90°, feed: 400mm/min, rapid traverse: 4m/min, machine dimensions X/Y/Z: approx. 1500mm/1500mm/1700mm, weight: approx. 1500kg. An on-site inspection is possible.

Key data: 330 mm, 850 mm, 190 mm

Circumferential diameter over bed / support 330 / 190 mm Center width 850 mm Bore 36 mm Speed range 60 - 2400 1/min Tailstock quill MK 3 / stroke 100 mm incl. accessories: 4-fold holder, chip back panel, T-slots in cross support Tightening tube for collets (New machine was designed according to DIN 8605)

Horizontal turning machine manufactured in 1999. This EMCO Emcoturn 325 features a 3-phase supply voltage of 400 V and a rated current of 9.5 A. If you are looking to get high-quality turning capabilities, consider the EMCO Emcoturn 325 machine we have for sale. Contact us for further details.

This 4-axis EMCO MC 120-60 vertical machining centre was manufactured in 2008. It features an X-axis travel of 1200 mm, Y-axis travel of 600 mm, and Z-axis travel of 500 mm. The machine is equipped with a Fanuc 18i control unit and a tool magazine with 30 stations. It includes a Lang Eco Compact clamping system. If you are looking to get high-quality machining capabilities, consider the EMCO MC 120-60 machine we have for sale. Contact us for further details.

Manufacturer: Emco and Padovani Model : EMCOMAT-E200/1000 Year of manufacture: 2001 CE certified: Yes Included with the Machine - Complete set of tools - Full set of accessories Find more here - / Contact us at -

This 5-axis EMCO MC 75-50 was manufactured in 2008. It features an X-axis travel of 750 mm and Y-axis travel of 500 mm, providing versatile machining capabilities. The machine is equipped with a Heidenhain iTNC 530 control and a spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the EMCO MC 75-50 vertical machining centre we have for sale. Contact us for further details.

The machine is in good technical condition, testing is possible by prior arrangement.

This 5-axis EMCO MAXXMILL 350 was manufactured in 2017. It features a travel of 350 mm in the X-axis, 250 mm in the Y-axis, and 300 mm in the Z-axis. The machine is equipped with a spindle speed of 12,000 rpm and a tool magazine with 50 positions. If you are looking to get high-quality machining capabilities, consider the EMCO MAXXMILL 350 vertical machining centre we have for sale. Contact us for further details.

CONTROLS   CNC controls SIEMENS BASIC FUNCTIONS   number of spindles: 4   number of turrets: 2   live positions: yes   number of c-axes: 4 WORKING RANGE TURNING   turning diameter (max): 100 mm   bar diameter (max): 20 mm MAIN SPINDLE   spindle revolutions (max): 5000 /min COUNTER SPINDLE   spindle revolutions (max): 5000 /min TOOL MAGAZINE   number of positions: 48 ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 9600 mm   space requirements -front/back-: 1500 mm   total height: 2200 mm   total weight approx.: 2600 kg ATTACHMENTS (TURNING)   bar magazine: optional   - bar length (max): 3000 mm   chip conveyor: yes   coolant unit: yes   hydraulic system: yes Features: - various tool holders - various collets in every millimeter increment - bar feeder (dual chan ...

To mediate on behalf of the customer. Used machine Machine Type: CNC Double Turning Center Model: EMCO TURN 420MCplus Manufacturer: EMCO Control: Siemens 840D First commissioning: 2005 #009338 Location: Poland Control Siemens 840D Turning length 120 mm Turning diameter100 mm Number of axes 2x3 Spindle speed 5000 rpm The above information was provided to us by the seller and must be checked during inspection. This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.