129,383 used machines on RESALE, but how to find them? Machine Search
This 5-axis EMAG BAW 06-22 double-spindle machining center in 5-axis design (on both sides) was manufactured in 2006. It features double spindle machining, a 600 mm spindle distance, and X/Y/Z travels of 600/975/500 mm. The machine includes a high-speed milling spindle at 17,500 rpm, dual 72-unit tool magazines, and a robust HSK A63 tool holder. Additional features include a KNOLL coolant system, 70 bar high-pressure pump, and a chip conveyor. If you are looking to get high-quality milling capabilities consider the EMAG BAW 06-22 machine we have for sale. Contact us for more information.
This EMAG VSC 250 vertical turning machine was manufactured in 2014. It features a powerful main spindle drive with up to 28kW power at 40% duty cycle and a speed range of 0-4500 rpm. Equipped with a Siemens SINUMERIK 840Dsl control system and a robust 12-position EMAG flange turret, it ensures precise and efficient operations. Ideal for handling workpieces up to 6kg with its specialized hydraulic chuck. For more information about this vertical turning machine, please reach out to us.
Its System of 2 EMAG VL03 horizontal turning machines that were manufactured in 2012 and 2010. It features a Fanuc control system, Series 32i-Model A, with a travel range of 400x200mm and a spindle speed of up to 7,500 rpm. The system machine includes a 12-station tool turret with VDI 40 tool holders and a tool drive of 6,000 rpm. Consider the opportunity to buy this horizontal turning machine system with robot included. Contact us for more information about this system.
This vertical turning machine was manufactured in 2011. The EMAG VLC 250 features a Siemens Sinumerik 840Dsl control system, a 12-station tool turret, and a 3-jaw power chuck with a quick jaw change system. It includes a coolant system with a paper band filter and an electrostatic emulsion mist extractor. Ideal for handling workpieces up to 175mm in height and 12kg in weight. For more information about this vertical turning machine, please reach out to us.
A total of three EMAG vertical turning machines are available. Chuck diameter: 200mm, max. swing diameter: 200mm, travel X/Z: 200mm/400mm, speed: 7500rpm, tool stations: 12. Machine dimensions X/Y/Z: approx. 2450mm/1900mm/2300mm, weight: approx. 5500kg, control: Fanuc. Including extraction system and chip conveyor. Documentation available. An on-site inspection is possible.
This 3-axis EMAG VL2 vertical turning machine was manufactured in 2017. It features a max workpiece diameter of 100 mm, chuck diameter of 160 mm, and a swing diameter of 210 mm. The main spindle offers a power rating up to 18.1 kW and a max spindle speed of 6,000 rpm. Consider the opportunity to buy this EMAG VL2 vertical turning machine. Contact us for more information.
This EMAG VTC 250 was manufactured in 2013. It features a chuck diameter of 250 mm and can handle workpieces up to 140 mm in diameter. The machine offers an X-axis travel of 300 mm and a Z-axis travel of 740 mm. Consider the opportunity to buy this EMAG VTC 250 vertical turning machine. Contact us for more information.
This EMAG VTC 250 was manufactured in 2015. A vertical turning machine featuring a chuck diameter of 250 mm and maximum workpiece diameter of 140 mm. Axis travel includes 300 mm on the X-axis and 740 mm on the Z-axis. Consider the opportunity to buy this EMAG VTC 250 vertical turning machine. Contact us for more information.
control: Fanuc - - -: - - - - - - - - -: - - - - - - Vertical Turning Machine | EMAG - VL 4 with driven tools, equipped with a workpiece conveyor belt, a chip conveyor, and a coolant system The machine is in a well-maintained condition. Technical data of the machine will follow soon. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL4 | VL-4 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
control: Fanuc - - -: - - - - - - - - -: - - - - - - Vertical Turning Machine | EMAG - VL 4 with driven tools, equipped with a workpiece conveyor belt, a chip conveyor, and a coolant system The machine is in a well-maintained condition. Technical data of the machine will follow soon. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL4 | VL-4 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-axis: 332 mm z-axis: 625 mm control: Fanuc The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
control: Fanuc - - -: - - - - - - - - -: - - - - - - Vertical Turning Machine | EMAG - VL 4 with driven tools, equipped with a workpiece conveyor belt, a chip conveyor, and a coolant system The machine is in a well-maintained condition. Technical data of the machine will follow soon. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL4 | VL-4 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CONTROLS CNC controls FANUC BASIC FUNCTIONS number of spindles: 1 number of turrets: 1 MAIN SPINDLE spindle revolutions (max): 6000 /min ELECTRICAL SPECIFICATIONS total power consumption: 36 kW mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 4200 mm space requirements -front/back-: 2300 mm total height: 3200 mm total weight approx.: 7500 kg
General: Max. workpiece diameter: 140 mm Chuck diameter: 250 mm Max. turning length: 700 mm Gauge I: Tool carrier I: Tool turret (X/Z) Tool drive: 9,600 rpm, 44 Nm Tool holder: BMT Number of stations: 11 + 1 part gripper X-axis: 310 mm Z-axis: 1,115 mm Displacement measuring systems (X/Z): Direct (glass scales) Sub-spindle (OP20): motor spindle Speed: 5,000 rpm Power: 33.9 kW Torque: 231 Nm Lining: 2+2 jaw power chuck Clamping Cylinder: Full Clamping Cylinder, Hydraulic C-axis: 0.01° Gauge III: Tool carrier II: Tool turret (X/Y/Z) Tool drive: 9,600 rpm, 44 Nm Tool holder: BMT Number of stations: 11 + 1 part gripper X-axis: 620 mm Y-axis: 50 mm (+ 22/ - 28 mm) Z-axis: 1,115 mm Displacement measuring systems (X/Z): Direct (glass scales) Gauge IV: Main spindle (OP30): Movable motor spindle Speed: 5,000 rpm Power: 33.9 kW Torque: 231 Nm Lining: Co ...
weight of the machine ca.:8 t dimensions of the machine ca.:2,95 x 1,6 x 2,36 m chucking diameter:250 mm swing diameter:265 mm x-travel:170 mm z-travel:200 mm spindle turning speed range:1.500 U/min spindle bearing diameter:100 mm Pick-up machine
Article: Vertical turning and grinding centre Manufacturer: EMAG Type: VSC 250 DS Yob: 2008 Control: SIEMENS 840D Grinding spindle speed: 30,000 rpm Rotation spindle speed: 3,000 rpm Tool places turret: 12 Cooler for spindle and machine bed cooling Cooling lubricant - lifting station (no independent cooling lubricant supply) Chip conveyor Parts handling Air through the spindle Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, this can be overhauled in a spindle factory. Otherwise the machine is in a very good condition and fully functional. Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
EMAG VTC 250 DUO DDYear of manuf. : 2020 Control : Siemens 840 Dsl Turning diam. : 140 mmTurning length : 700 mm____________Description:In General:Max. workpiece diameter:140 mmChuck diameter:250 mmMax. turning length:700 mmTrack I:Tool carrier I:Tool turret (X/Z)Tool drive:9,600 rpm, 44 NmTool holder:BMTNumber of stations:11 + 1 Part gripperX-axis:310 mmZ-axis:1,115 mmPosition sensors (X/Z):Direct scalesTrack II:Main spindle (OP10):Travelling direct drive spindleSpeed:5,000 rpmPower:33.9 kWTorque:231 NmChuck:Collet chuckClamping cylinder:Hydraulic clamping cylinderSupport control:PneumaticW-axis:772 mmC-axis:0.01°Position sensor (W):Direct scale:Sub-spindle (OP20):Direct drive spindleSpeed:5,000 rpmPower:33.9 kWTorque:231 NmChuck:2+2-jaw power chuckClamping cylinder:Hydraulic clamping cylinderC-axis:0.01°Track III:Tool Carrier II:Tool turret (X/Y/Z)Tool drive:9,600 rpm, 44 N ...
EMAG WEISS W 11-CNC SL650Year of manuf. : 2020 Control : Sonstige WEISS CNC Centre width : 650 mm____________Description:In Generel:ear of construction:2020Control system:WEISS CNCCentre width:650 mmCentre height:200 mmGrinding wheel dimensions:400x60 mm + 500x60 mmWorkpiece headstock:Speed:10 -650 rpmWorkpiece weight max.:250 (100) kgSanding diameter max.:390 mmMounting:MK4Grinding headstock:Peripheral speed:20 - 50 m/sGrinding disc dimensions right:500 x 60 mmGrinding disc dimensions left:400 x 60 mmX-axis:380 mmZ-axis:700 mmB-axis:torque motor, infinitely variableTailstock:Pinole diameter:50 mmPionole stroke:45 mmMounting:MK 4Cylinder fine adjustment:+/- 0.04 mmEquipment:Positioning sensors:Direct scalesGrinding spindles:2x grinding spindle (left/right)GAP / Crash Controll:Structure-borne sound (Sensotronik)Balancing:MPM balancing deviceWorkpiece measurement:Marposs PF MEAutomat ...
EMAG VL5i Vertical Lathe (2013) Max. chuck diameter: 250 mm Max. circumferential diameter: 270 mm Max. workpiece diameter: 220 mm Max. workpiece height: 175 mm X-axis travel: 660 mm Travel Z-axis: 300 mm Rapid traverse X: 60 m/min Rapid traverse Z: 30 m/min 12-cavity turret with VDI-40 tool holder Driven tools up to 6,000 rpm Power driven tools: 8.5 kW Main spindle power: 18 / 27 kW Torque main spindle: 200 / 300 Nm Chip conveyor available Emulsion mist extraction available Control Siemens 840D SL Machine in production Operating hours: 44,500 h
EMAG VL5i Vertical Lathe (2013) Max. chuck diameter: 250 mm Max. circumferential diameter: 270 mm Max. workpiece diameter: 220 mm Max. workpiece height: 175 mm X-axis travel: 660 mm Travel Z-axis: 300 mm Rapid traverse X: 60 m/min Rapid traverse Z: 30 m/min 12-cavity turret with VDI-40 tool holder Driven tools up to 6,000 rpm Power driven tools: 8.5 kW Main spindle power: 18 / 27 kW Torque main spindle: 200 / 300 Nm Chip conveyor available Emulsion mist extraction available Control Siemens 840D SL Machine in production Operating hours: 44,500 h Auction-ID: A7-45256-2
Technical data Note: There was no original machine documentation. To the best of our knowledge, all the following technical data were partially read from the nameplate and taken from publicly accessible online sources. Manufacturer: SW (Swabian Machine Tools) / EMAG Type: BAS 03-12 Year of Make: 2008 Serial Number: 1820031 Machine Type: CNC Universal Machining Center Control: Siemens Sinumerik 840D Powerline Operating voltage: 3/PE 400 V, 50 Hz Rated current: 85 A Fuse: 125 A Pneumatic pressure: 6.0 bar Air consumption: approx. 0.3 Nm³ Machine weight: approx. 8,000 kg Configuration Siemens CNC control Double station / multi-sided machining Automatic tool changer Chip conveyor (KNOLL) Cooling lubricant and filter system (KNOLL) Full fairing Suitable for series production
Technical data Note: There was no original machine documentation. To the best of our knowledge, all the following technical data were partially read from the nameplate and taken from publicly accessible online sources. Manufacturer: SW (Swabian Machine Tools) / EMAG Type: BAS 03-12 Year of Make: 2003 Serial number: 182.012 Machine Type: CNC Universal Machining Center Operating voltage: 3/PE AC 400 V / 50 Hz Spindle power: 14.5 kW Rated current: 85 A Connected load: 60 kVA Configuration Double station / multi-sided machining Automatic tool changer Chip conveyor / filter system Full fairing Integrated control cabinet
maximum number of results exceeded
please refine your search
