elm used for sale

- Producer Elmag Superfici - Type TU 166 - Year of construction 2001 - Working width 1300 mm - Number of lamp from top 2 Stk. - Lamp straight to conveyor 2 Stk. - For mercury lamps - For gallium lamps - Electic capacity lamp 80 W/cm - Selective shiftable - Length cross bar conveyor - Feed speed infinitely adjustable by hand wheel ~ 2 - 7,5 m/min - Voltage / HZ 400 / 50 - Commodity code 8419 3200

- Producer Elmag Superfici - Working width 1300 mm - Number of lamp from top 2 Stk. - Lamp straight to conveyor 2 Stk. - For mercury lamps - For gallium lamps - Electic capacity lamp 80 W/cm - Selective shiftable 80 / 40 W/cm - Feed speed infinitely adjustable by hand wheel ~ 2 - 7,5 m/min - Location - Voltage / HZ 400 / 50 - Commodity code 8419 3200

- Producer Elmag Superfici - Type TU 166 - Year of construction 1997 - Working width 1300 mm - Operationside right - Number of lamp from top 2 Stk. - Lamp straight to conveyor 2 Stk. - For mercury lamps - For gallium lamps - Selective shiftable - Feed speed infinitely adjustable by hand wheel ~ 2 - 7,5 m/min - Length 6.000 mm - Location - Voltage / HZ 400 / 50 - Commodity code 8419 3200

In this case, the containers to be labelled are fed in by hand. The system was used for cylindrical jars with a low height. They are first given a base label from below, turned by 180° using a turning basket, and then given a security seal label from above. The labelled jars then run onto a storage table, offset by 90°.

Slotting machine Elmass for wedge tracks from 2.5-14mm. Thanks to the bore-guided tool, even extra-long keyways can be pushed. Tools for standard holes of 6-50mm and groove widths of 2.5-14mm are available. Wedge tracks in blind holes are also possible. Multiple wedge tracks thanks to the 400mm rotary table are feasible.

Elma XTRAST Elmasonic 9738 Ultrasonic cleaning device In a very good condition!

ELMETHERM 27 x 4.4 m furnace for plastic pipes was manufactured in 1997 in France. The furnace is used in the process of heating and shaping single-layer plastic pipes with a maximum wall thickness of 3 mm and a diameter from 8 mm to 35 mm. The workpieces are preheated in the machine’s heating pipes and then vulcanised and shaped at 168°C. At the very end, the plastic pipes are moved to a special cooling tunnel, where they are cooled with air at 42.8°C. Automated heat treatment of large quantities of workpieces is possible due to the use of conveyors in the machine that transport the workpieces between the different stages of the process. All functions, such as switching on heating or cooling, are controlled via the SCHNEIDER MAGELIS HMI touch panel. The gas furnace for moulding PA plastic pipes weighs approximately 35000 kg. Technical data of the ELMETHERM 27 x 4.4 m industri ...

Perkin Elmer PinAAcle 900 F Flame AAS Perkin Elmer AAS PinAACle 900F F Flame AAS True double beam, 8 –lamp mount, Fibre Optic light path automated flame and burner optimization PC and Perkin Elmer WinLab Software Lamps on request Last Service 07/2022 with warranty

Perkin Elmer Chemagic 360-D Nucleic Acid Extraction System The Perkin Elmer Chemagic 360-D is an automated benchtop system for the isolation of nucleic acids (DNA and RNA) from a wide range of sample materials. It uses Chemagen's magnetic bead technology to extract high-purity nucleic acids for various downstream applications. Key Features and Specifications Technology: The system is based on the patented Chemagen M-PVA magnetic bead technology. Metal rods are magnetized to collect the beads containing the bound nucleic acids and transfer them between different process solutions, minimizing cross-contamination. Sample Volume Flexibility: It offers different "Rod Heads" for different volume ranges and throughputs: 12-Rod Head: For sample volumes from 1 mL to 10 mL. 24-Rod Head: For sample volumes from 200 μL to 4 mL. 96-Rod Head: For sample volumes from 10 μL to 400  ...

Perkin Elmer Lambda 25 UV VIS Spectrophotometer, Dual-beam device, wavelength range 190-1100nm, 10 mm or 100mm cuvette holder, Option flow-through cuvette with peristaltic pump, Software Perkin Elmer WinLab

Perkin Elmer Heater with Quartz Cuvette for Perkin Elmer AAS Systems

Compact device for automated nucleic acid purification The Perkin Elmer Chemagic 360 is an automated benchtop system for isolating nucleic acids (DNA and RNA) from a wide range of sample materials. It uses Chemagen's magnetic bead technology to extract high-purity nucleic acids for various downstream applications. With dimensions as small as 80 x 80 cm and its unique sample volume flexibility, the Chemagic 360 is an innovative instrument that can be adapted to almost any of your nucleic acid purification needs. Utilizing the proven M-PVA Magnetic Bead technology, the Chemagic 360 delivers high yields of high-purity nucleic acids suitable for a wide range of downstream applications such as NGS, MLPA, genotyping, and PCR. Features at a glance • Optimized design to avoid cross-contamination • Sample volume from 10 μl - 10 ml • Throughput from 96 to 4000 samples per  ...

Elmo Rietschle VC300 Vacuum pump 3x Elmo Rietschle oil lubricated rotary vane pumps, 5.5Kw, 300 M3/H flow rate

Cylindrical grinding machine manufactured in 2022. This ELMAG CG 800 features a maximum grinding diameter of 200 mm and a grinding length of 800 mm. It is equipped with a robust headstock spindle and transverse feed guide, ensuring precision in grinding operations. If you are looking to get high-quality grinding capabilities, consider the ELMAG CG 800 machine we have for sale. Contact us for further details.

Flame Perkin Elmer mod. AAnalyst 200 Including: Air-Acetylene burner Controlled with LCD touchscreen Refurbished

Elmo Rietschle oil-lubricated rotary vane vacuum pump complete with 15 kW/50Hz 3~motor, 700 m³/h, 0.10 mbar(abs), completely overhauled

Perkin Elmer HS 40, Headspace sampler for 40 vials, max. temperature + 210 Celsius, min. +35 Celsius, fits all gas chromator graphs,

Pellet heating, pellet stove, biomass stove used. Manufacturer: ELMEC Group Srl Type: B-MAX 300 EBBR020300-P01 Year of construction: 2018 Burner power max. 300 kW Nominal power 250.2 kW Max water temp. 90°C Boiler dimensions: approx. 1700 x 1100 x 1650 mm Additional burner approx. 1000 x 500 x 900 mm Pellet hopper approx. 800 x 800 x 1200 mm + auger Subject to changes and errors in the technical data, specifications and prices as well as prior sale.

Circular table saw Elmag with sliding table The machine is in good condition, operational. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12

From the stock of authorities: Pulse system little used Elmatech Hybrid 4002 Year of construction 2005 Welding capacity 400Ampere at 60% ED 320Amps at 100% Water cooling 4-Roll Wire Feeder Wire feeder case DV 39 with 5meter intermediate hose package 4meter burner with regulator Wire rolls 1.0-1.2mm + rolls for aluminum wire Dimensions in mm without case 1000x450x930 with operating instructions, pressure reducer and ground cable

Type: ELMO-G 2BH1 490-1AH13 2-flute pmax.: 180 mbar Motor: Siemens Power: 0.43 kW Voltage: 230/ 400 V frequency 50/ 60 Hz Degree of protection: IP54 New !

Electric motor, three-phase motor, fan motor -Manufacturer: ELMO, electric motor fan motor -Type: QSB 71 B/4-2T -Power: 0.33 KW -Speed: 1400 rpm -Shaft: Ø 11 x 25 mm -Protection class: IP20 -Dimensions: 190/165/H125 mm -Weight: 6.6 kg

Electric motor VEM, ELMO type 1179.4 0.016 k W 2350 rpm 220 V AC IP20 Shaft diameter: Ø 6 mm New ! Dimensions 120 x 110 x 95 mm

electric motor, three-phase motor -Manufacturer:Elmot-Schäfer, electric motor type ESHE 100LB-4 -Power: 3 kW -Speed: 1440 rpm -Shaft: Ø 28 x 60 mm -Design: B5 -Protection class: IP55 -Dimensions: 370/250/H280 mm -Weight: 37 kg

Electric motor VEM, ELMO type 1179.4/2 0.025 k W 2800 rpm 220 / 380 V AC IP20 Shaft diameter: Ø 6 mm New ! Dimensions 120 x 110 x 97 mm

Electric motor VEM, ELMO type 1059.1/2 0.04 k W 2800 rpm 220 V AC IP00 Shaft diameter: Ø 9 mm Flange diameter: Ø 50 / 75 mm New !' Dimensions 143 x 90 x 75 mm

Geared motor ELMO Type 1357-2 225 rpm 220 / 380 V shaft Ø 9 mm New ! Dimensions 220 x 150 x 140 mm

Geared motor ELMO Type 1308. 2/4 416 rpm 220 V shaft Ø 9 mm New ! Dimensions 220 x 160 x 150 mm

Geared motor ELMO Type 1357. 2/1 ( 1357.2/1 ) 116 rpm 220 / 380 V shaft Ø 9 mm New ! Dimensions 220 x 160 x 140 mm

Electric motor VEM, ELMO Type 1279.2/3 0.025 k W 2800 rpm 220 / 380 V AC IP20 shaft diameter: Ø 6 mm Flange diameter: Ø 32 / 62 mm New ! Dimensions 123 x 80 x 80 mm

Perkin Elmer Clarus 500 with autosampler and 2 x FID, currently serviced

Electric motor VEM, ELMO type 1060.1/3 0.04 k W 1400 rpm 220 V AC IP00 shaft diameter: Ø 9 mm Flange diameter: Ø 50 / 75 mm used, tested ! Dimensions 155 x 92 x 75 mm

Elmo G 200 Side Channel Compressor 8.5kW 2915rpm Unused Replacement Machine Weight approx. 180kg The cover on the engine at the rear is missing. unused replacement device. Was in stock, in case the first machine should fail. From insolvency

Key data: 420 mm, 5150 mm, 420 mm

Elmag Giant Line 420 NC Drive motor 7.5 KW Hydraulic motor 1.5 KW Frequency-controlled saw blade drive 20-80m/min Powered chip brush Screw shavings conveyor Cutting data: Round max. 420mm Rectangle 420x420mm Saw blade length 5150x41x1.30mm Machine from stock / subject to prior sale. Make an appointment for a viewing.

Perkin Elmer Headspace Sampler HS 40XL, Headspace sampler for 40 vials

Spectrometer of Perkin Elmer Pin AAcle 900 F, used, fully functional

We want to reduce our machinery and therefore have a Statomat Elmotec bandage machine BK2 from 2018 for sale. The machine is equipped with a stator mount for Ø120mm. If you are interested in our machine, please feel free to send us a price offer.

Properties: Length 800 mm Width 330 mm Total height 770 mm Weight 22.4 kg Manufacturer ELMOR MORATTO - Italy Speed 905 min ̄¹ Installed engine power 1.85 kW Series: 03-13-5620.004 Connections: Input: DN 50 Output: DN 50

- Producer Elmag Superfici - Type Magnum 3.2.2 - Year of construction 2008 (2010) - Working width 1.350 mm - Working height 900 mm + - 20 mm - Operating side, right - Actual condition, machine is not overhauled - Duo gun drive system - Spraying gun carrier independently controllable - Dry filter system - Exhaust air 13.500 m³/h - Transport belttransport System - Feed speed adjustable bis 18 m/min - 2 belt cleaning units - Belt cleaning system with roller - Belt cleaning system, behind the machine - Lacquer reclaiming system with v-belt - Gun control system - PLC control with touch screen - Number of installed lacquer circles 2 Stk. - Supply air box - Length ~ 6.680 mm - Width 4.455 mm - Total connection power ~ 26.3 KW - Voltage / HZ 400 / 50 - Location, not on stock - Voltage fluctuation max. +/- 5 %

verfügbar ab ca. 09-2023 - Producer Elmag Superfici - Type ETC-3/2-5500 - Year of construction 2003 - Working width 1.300 mm - Number of pallets 50 Stk. - Max. part height ~100 mm - Clearance height between the pallet 120 mm - Measure: middle pallet - middle pallet 3.800 mm - Max. part length 5.200 mm - Number of adjustable temperature zone 2 Stk. - Fresh air 9.000 m³/h - Heat output max. 2 x 45.000 kcal/53 kW - Drying temperature ~ 55 - 60 Grad - Incl. heat exchanger - Throughput in u-shape - Infeed side left - Feed speed infinitely adjustable 2 - 10 m/min - Suitably for water based lacquer - Suitably for solvent based lacquer - Length 7.400 mm - Width 6.510 mm - Height 5.745 mm - Location, not in stock ab 09-2023 - Voltage / HZ 400 / 50 - Voltage fluctuation max. +/- 5 % - Ohne Stellventile und Wasserpumpen

basket dimensions: 0 control: 0 total power requirement: 0 kW weight of the machine ca.: 0 t dimensions of the machine ca.: m heating capacity: kW ELMA TI-H-10 Multi-Frequency Ultrasonic Cleaning Device ? Multi-frequency version with 35/130 kHz: 35 kHz for cleaning oils and greases from hard surfaces such as metal, glass, and hard gemstones. 130 kHz for cleaning delicate surfaces in jewelry and electronics. ? Degas function for effective degassing of the cleaning fluid ? Sweep function for optimal sound field distribution ? Adjustable ultrasonic power ? Special stainless steel vibrating tanks for robust use and long service life ? Timer for ultrasound, adjustable from 0-15 min. and continuous operation ? Heating control from 30-80°C Technical Data Mains voltage (Vac) 230V 1 Ph. / 1N / 1 PE Total power consumption (W) 1000 Effective ultrasonic power (W) 200 Maximum ultrasonic power (W) 8 ...

General SKU300U907 MakeSiemens TypeDiffraktometer D5000 Year of construction1991 LocationBarneveld Floor space1,03x1,03 m Total height1,84 m Weight760 kg Extra SpecificationsThe D5000 can be used to determine the crystal structure of a material through X-ray diffraction. By directing an X-ray beam onto the sample, the D5000 measures the diffraction patterns that arise when the radiation is scattered by the atoms in the crystal lattice. These patterns are analyzed to obtain information about the arrangement of atoms in the crystal lattice. MiscellaneousSiemens - ElmoMiscellaneous > MiscellaneousBrand > Siemens - Elmo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many ...

This ELMAG UFM 125GT was manufactured in 2015. It features a universal milling machine with a spindle Morse taper ISO 40, and a table surface of 1,320 x 320 mm. The machine offers a vertical speed range of 45-1,660 f/p and a horizontal speed range of 40-1,300 f/p. Ideal for precise and versatile milling tasks. Contact us for more information about this machine.

General SKU254S227 MakeElmess (D) LocationBarneveld CEcheck TypeDHG01B03St/SE-4 Flow heater Pressure Working pressure2 Bar Main Features Heating (medium)Electric Capacity8 KW Temp.820 °C Specified Features - Temperature control unit MaterialStainless steel 1.4541 (321) Temperature control units Horizontalflow heater Number of tubes:1 Tube diameter76,1mm Tube length900mm Wall thickness tubes2,9mm Max. temperature-10/550...820 degr. C Shell diameter219 mm Temperating machineflow heater Gas heatingcheck Electric capacity4 kW 230 Volt (2x) Temperature-10/550...820 degr. C With temperature controllercheck Information No.826280/001 and 826280/002 Mach.No.826280/001 and 826280/002 Year of construction2016 With switchgear(as is) Floorspace1,6x0,9 M Total height1,2 M Weight700 Kg Extra SpecificationsUNUSEDTemperature control unitsElmessHeat exchangers > Temper ...

Perkin Elmer AAnalyst 600 Atomic Absorption Spectrometer Untested Equipment Without a computer Without software

Piston filler with 10 filling points for filling viscous/viscous products in glasses or bottles with bottle mouths from 28 to 38mm Up to a maximum of 0.75ltr

Pass width mm: 1300 02 Engines KW: 1 + 1 02 Brushes Brush diameter mm: 300 Vacuum table Control cabinet KW: 8.5

TECHNICAL DATA: Handling System Linear Meters: about 135,38 Working width mm: 600 - linear meter 16,5 Working width mm: 650 - linear meter 29 Working width mm: 670 - linear meter 16 Working width mm: 700 - linear meter 58,4 Working width mm:1030 - linear meter 3,48 Electrical Panels: 03

Description Rotary vane pressure vacuum pump Rietschle KTA 80 .1 YOC 2006 max. delivery quantity 80 [m3/h] max. pressure ±600 [mbar rel.]