elm used for sale

- Producer Elmag Superfici - Type TU 166 - Year of construction 2001 - Working width 1300 mm - Number of lamp from top 2 Stk. - Lamp straight to conveyor 2 Stk. - For mercury lamps - For gallium lamps - Electic capacity lamp 80 W/cm - Selective shiftable - Length cross bar conveyor - Feed speed infinitely adjustable by hand wheel ~ 2 - 7,5 m/min - Voltage / HZ 400 / 50 - Commodity code 8419 3200

- Producer Elmag Superfici - Working width 1300 mm - Number of lamp from top 2 Stk. - Lamp straight to conveyor 2 Stk. - For mercury lamps - For gallium lamps - Electic capacity lamp 80 W/cm - Selective shiftable 80 / 40 W/cm - Feed speed infinitely adjustable by hand wheel ~ 2 - 7,5 m/min - Location - Voltage / HZ 400 / 50 - Commodity code 8419 3200

- Producer Elmag Superfici - Type TU 166 - Year of construction 1997 - Working width 1300 mm - Operationside right - Number of lamp from top 2 Stk. - Lamp straight to conveyor 2 Stk. - For mercury lamps - For gallium lamps - Selective shiftable - Feed speed infinitely adjustable by hand wheel ~ 2 - 7,5 m/min - Length 6.000 mm - Location - Voltage / HZ 400 / 50 - Commodity code 8419 3200

In this case, the containers to be labelled are fed in by hand. The system was used for cylindrical jars with a low height. They are first given a base label from below, turned by 180° using a turning basket, and then given a security seal label from above. The labelled jars then run onto a storage table, offset by 90°.

Piston filler with 10 filling points for filling viscous/viscous products in glasses or bottles with bottle mouths from 28 to 38mm Up to a maximum of 0.75ltr

1 JAMES HEAL Elmatear tear tester for accurately testing textiles, nonwovens, and a wide variety of similar materials, including paper, board, and plastic

Pass width mm: 1300 02 Engines KW: 1 + 1 02 Brushes Brush diameter mm: 300 Vacuum table Control cabinet KW: 8.5

ELMETHERM 27 x 4.4 m furnace for plastic pipes was manufactured in 1997 in France. The furnace is used in the process of heating and shaping single-layer plastic pipes with a maximum wall thickness of 3 mm and a diameter from 8 mm to 35 mm. The workpieces are preheated in the machine’s heating pipes and then vulcanised and shaped at 168°C. At the very end, the plastic pipes are moved to a special cooling tunnel, where they are cooled with air at 42.8°C. Automated heat treatment of large quantities of workpieces is possible due to the use of conveyors in the machine that transport the workpieces between the different stages of the process. All functions, such as switching on heating or cooling, are controlled via the SCHNEIDER MAGELIS HMI touch panel. The gas furnace for moulding PA plastic pipes weighs approximately 35000 kg. Technical data of the ELMETHERM 27 x 4.4 m industri ...

TECHNICAL DATA: Handling System Linear Meters: about 135,38 Working width mm: 600 - linear meter 16,5 Working width mm: 650 - linear meter 29 Working width mm: 670 - linear meter 16 Working width mm: 700 - linear meter 58,4 Working width mm:1030 - linear meter 3,48 Electrical Panels: 03

Description Rotary vane pressure vacuum pump Rietschle KTA 80 .1 YOC 2006 max. delivery quantity 80 [m3/h] max. pressure ±600 [mbar rel.]

Description • Radial blower with three to five stages for pressure operation • Compact design • Low temperature even with drossing • Fast start thanks to light impellers

Side channel blower SIEMENS type ELMO-G 2BH1510-7HC56. Power 4 kw. With intake and exhaust silencer Diameter inlet 50 mm. Diameter outlet 60 mm. The machine got checked, a test drive hes been done.

Flame Perkin Elmer mod. AAnalyst 200 Including: Air-Acetylene burner Controlled with LCD touchscreen Refurbished

Key data: 250 mm, 550 mm, 145 mm

Demonstration article Condition: Mint The Superturn 550/125 Vario with MFB 16 Vario offers modern turning, milling and drilling technology for the central machining of small to medium-sized workpieces - a practical all-rounder for mechanics and model makers, vocational schools and training workshops. The basic component SUPERTURN 550/125 Vario is a lead screw lathe with an infinitely adjustable speed control and a digital speed display. The maximum turning size above the carriage is Ø 145 x 550 mm, the spindle bore diameter is 26 mm. Standard equipment: - Digital speed display - Three-jaw lathe chuck ø 125 mm, centr. - Centrifuge MK 4 - Grain tip MK 2 - Emergency stop button / zero-voltage trigger - Lathe chuck protection with safety limit switch - Chip tray / bulkhead - Toolbox / Instruction Manual / CE Specifications: Center width 550 mm Tip height 125 mm  ...

Hydraulic workshop press PREMIUM WPMEH 30/2 Demonstration article Condition: slight signs of wear --> paint defects/scratches Standard equipment - Overload safety valve - Press pressure gauge - Switching valve up / down - Cylinder piston chrome-plated - Press table with stake-out bolt - Operating instructions / CE Specifications: Pressing capacity max. 30 tons Electro-hydraulic drive Two drive speeds Manual Hand Pump Press table chain (height adjustment) Oil flow stage 1/2 2.82 / 11.84 l/min Piston speed level 1/2 9.8 / 3.57 mm/s Return speed 18.11 mm/s Motor power 1500 W Mains connection 400/50 V/Hz Machine height 2120 mm Machine length without pump 1000 mm Machine width 695 mm Inlet length 750 mm Strap width 260 mm Inlet height max. 950 mm Machine length with pump 1315 mm Machine width with pump 805 mm Piston stroke 380 mm Weight 385 kg Subjec ...

Description Rietschle SKG 314-2 Year of construction 1999

Description – max. delivery quantity 80 m3/h – max. pressure ±900 mbar rel. – two pumps available (year of construction 2000 and 2002)

Elmo Rietschle oil-lubricated rotary vane vacuum pump complete with 15 kW/50Hz 3~motor, 700 m³/h, 0.10 mbar(abs), completely overhauled

Demonstration article Condition: Mint Specifications: Drilling capacity in steel 50 mm Milling capacity face milling cutter 125 mm Milling capacity end mill 40 mm Spindle holder (turning spindle) ISO 40 Speed range 40 - 2000 rpm Speed levels infinitely variable Quill stroke 65 mm Milling table grooves / width x spacing 5 / 14 x 63 mm Verical table grooves / width x spacing 3 / 14 x 63 mm Spindle projection 180 - 485 mm Table load capacity 160 kg Milling head swivel range ± 45 ° Quill spacing table 50 - 450 mm Horizontal spindle distance table 145 - 545 mm Milling table area 750x320 mm Table path X x Z 405 x 305 mm Vertical table surface 890 x 225 mm Feeds X/Y/Z 10 - 1000 mm/min Feed stages X/Y/Z infinitely variable Motor power 3700 W Torque X-axis 7.7 Nm Y-Axis Torque: 7.7 Nm Torque Z-axis 1.7 Nm Mains connection 400/50 V/Hz Cubature 750x320x450 mm Len ...

SPECIFICATIONS: Sliding table saw with 45° swiveling saw blade Diameter saw blade mm: 400 Diameter of the scorer mm: 120 Length of carriage mm: 3800 cutting width mm: 1600 Motor power KW: 5,5 Motor with brake Complete with: - 01 pneumatic presser - Digital control panel - Duplex continuous inclined cutter 0°-90°

air flow quantity: . m³/h suction power: . kPa power capacity: 16 kW The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 40 mm

Demonstration article Condition: Used Premium quality MADE IN SWEDEN The gearbox is built with the traditional and tested technology for the highest possible torque. Helical gears in combination with steel against reinforced fiber material provide a high degree of efficiency, a low noise level, as well as a long service life and an almost maintenance-free transmission. Specifications: Drilling capacity in steel: 40 mm Threading capacity M28 Spindle holder (turning spindle) MK 4 Speed range 90 - 1500 rpm Speed levels 8 Quill stroke 190 mm Quill feed stages 4 Column diameter 140 mm Quill feed 0.10/0.16/0.24/0.33 mm/rev T-slots, width M14 mm Drilling table stroke 830 mm Spindle projection 330 mm Drilling table rotatable ± 360° Quill spacing base 1210 mm Quill spacing table 215 - 830 mm Drilling table area 500x400 mm Motor power (2-stage) 2200 / 2600 W M ...

Transformer station with prefabricated concrete building L = 3,20m W = 1,50m H = 1m + 1,45m 200 kVA Doors are available.

Slotting machine Elmass for wedge tracks from 2.5-14mm. Thanks to the bore-guided tool, even extra-long keyways can be pushed. Tools for standard holes of 6-50mm and groove widths of 2.5-14mm are available. Wedge tracks in blind holes are also possible. Multiple wedge tracks thanks to the 400mm rotary table are feasible.

Key data: 16 mm, 150 mm

KBM 16 T VARIO SET action Composed of: V-belt bench drill Model KBM 16 T VARIO 1 pcs vise 3' / 75 mm 2 pcs clamping screws T12mm 1 pcs.HSS twist drill cassette 1-13mm, 25 pcs. 1 pc. cutting oil spray 350 ml Specifications Drilling capacity in steel 16 mm Spindle holder (rotary spindle) MK 2 Speed range 340 - 2200 rpm Speed levels infinitely variable Quill stroke 90 mm Column diameter 60 mm T-slots, width 14 mm Drilling table stroke 275 mm Spindle projection 150 mm Drilling table swivel ± 45° Drilling table rotatable ± 180 ° Quill spacing table 360 mm Drill table area 243x243 mm Motor power 550 W Mains connection 230/50 V/Hz Cubature 195x195x360 mm Base plate area (lxw) 250x415 mm Height (total) 910 mm Weight 42 kg

length: mm height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Pulse welder Hybrid 4002 Year of manufacture 2005 Feeding device / 4 rolls wire feed DV 39 machine no.: 940 16 222 - Welding hose 4000mm - Ground cable 70 square 5000mm - Intermediate hose package approx. 4000mm - Hose package Binzel MB511 Pulse current The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 400 mm, 1000 mm, 235 mm

Universal lathe PREMIUM CU 400 RD - Vario Center width 1000mm incl. RÖHM lathe chuck Standard equipment: - RÖHM three-jaw lathe chuck - Quick-change steel holder set, 5 pieces - Halogen machine lamp - Emergency stop button / zero-voltage trigger - Lathe chuck protection with safety switch - Tool carriage with splash guard - Base frame / chip tray / bulkhead - Tool Kit / Instruction Manual / CE Specifications Center width 1000 mm Center height 200 mm Turning diameter over bed 400 mm Turning diameter over carriage 235 mm Turning diameter without bridge 550 mm Machine bed width 320 mm Cross slide travel 235 mm Upper slide travel 110 mm Lathe bit cross-section, max. 25x25 mm Lathe chuck holder DIN 55027 No. 6 Spindle holder (rotary spindle) MK 6 mm Spindle bore 52 mm Speed range 1, infinitely variable 18 - 98 rpm Speed range 2, infinitely variable 48 -  ...

Side channel blowers See nameplate, All 8 are the same!

current intensivity: 400 A weight of the machine ca.: 125 kg dimensions of the machine ca.: 470x1025x865 mm min. current voltage (V) 400 max. current voltage (V) 400 min. Welding current intensity (A) 10 max. welding current intensity (A) 400 Fuse protection 25 IP protection class 23 Insulation class H The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 330 mm, 1000 mm, 198 mm

Universal lathe PROFI 1000/165 incl. 3-axis position indicator incl. RÖHM lathe chuck incl. quick-change steel holder 'Set', system Multifix with electromagnetic motor brake Ready for operation: incl. oil filling, Completely assembled and test run carried out Standard equipment - RÖHM three-jaw lathe chuck Ø 160 mm - Four-jaw face plate chuck Ø 200 mm - Clamping disc Ø 300 mm - 2 fixed centering tips - Moving center punch MK 3 - Tracking bezel - Standing bezel - Quick-change steel bracket set ME - Threaded clock and interchangeable gear set - Halogen machine lamp - Emergency stop button / zero-voltage trigger - Lathe chuck protection with safety switch - Base frame / chip tray / bulkhead - Tool Kit / Instruction Manual / CE Specifications Center width 1000 mm Center height 165 mm Turning diameter over bed 330 mm Turning diameter over slide198 mm Turnin ...

Perkin Elmer Lambda 25 UV VIS Spectrophotometer, Dual-beam device, wavelength range 190-1100nm, 10 mm or 100mm cuvette holder, Option flow-through cuvette with peristaltic pump, Software Perkin Elmer WinLab

Perkin Elmer HS 40, Headspace sampler for 40 vials, max. temperature + 210 Celsius, min. +35 Celsius, fits all gas chromator graphs,

Key data: 8 KW, 3 kVA, 400 V

Gasoline Generator SEB 7500WD-AVR Frequently requested 400/230 volt frame unit for commercial use a, construction, service and agriculture as well as for private emergency power supply. With AVR control for sensitive consumers and high unbalanced load capacity thanks to oversized generator. Specifications Voltage - Frequency 400 / 230 / 50 V/Hz Maximum power 3~400V 8 kVA Continuous power 3~400V 7.2 kVA Power 3~400V cont. 10 A Maximum power 1~230V 3.8 kVA Continuous power 1~230V 3.4 kVA Power: 1~230V cont. 14.4 A Fuel Type: Gasoline Speed 3000 rpm Cooling air-cooled Engine type: Honda GX 390 Emission stage 5 Motor power 8.2 kW Displacement 389 cm³ Cylinder 1 Fuel tank capacity 6.1 l Consumption at 75% load 2.8 l/h Runtime per tank filling at 75% load 2.2 h Dimensions LxWxH 830x510x560 mm Weight (without fuel) 91 kg Sound power corresponding. Directive ...

Key data: 360 mm, 1000 mm

Demonstration article Condition: New Lathe 360 x 1000 - SAMPLE Tip height: 180 mm Center width: 1000 mm Turning diameter over bed: 360 mm Turning diameter without bridge: 500 mm Bridge length: 210 mm Machine bed width: 187 mm Spindle bore: 51 mm Lathe chuck holder: DIN55029 CAMLOCK D1-5 Tailstock Cone: MK4 2 speed ranges, variable L: 70–440 rpm/H: 350–2000 rpm Inch thread: 34, 4–56 teeth Metric Threads: 26, 0.4-7 Teeth Main motor power: 1.5 kW Coolant pump power: 40 W Gross/net weight: approx. 645kg / 560kg Package size 193 x 76 x 158 cm Subject to prior sale Free delivery throughout Austria

Perkin Elmer PinAAcle 900 F Flame AAS Perkin Elmer AAS PinAACle 900F F Flame AAS True double beam, 8 –lamp mount, Fibre Optic light path automated flame and burner optimization PC and Perkin Elmer WinLab Software Lamps on request Last Service 07/2022 with warranty

1. PE 200 AAS, tipo a fiamma.(con schermo di controllo, potrebbe funzionare senza o con computer) 2. PE 400 AAS.(senza schermo di controllo) 3. PE 900Z, tipo grafite. Tutti in ottime condizioni e set completo di computer e accessori necessari.

Pellet heating, pellet stove, biomass stove used. Manufacturer: ELMEC Group Srl Type: B-MAX 300 EBBR020300-P01 Year of construction: 2018 Burner power max. 300 kW Nominal power 250.2 kW Max water temp. 90°C Boiler dimensions: approx. 1700 x 1100 x 1650 mm Additional burner approx. 1000 x 500 x 900 mm Pellet hopper approx. 800 x 800 x 1200 mm + auger Subject to changes and errors in the technical data, specifications and prices as well as prior sale.

Circular table saw Elmag with sliding table The machine is in good condition, operational. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12

Perkin Elmer Heater with Quartz Cuvette for Perkin Elmer AAS Systems

Perkin Elmer Chemagic 360-D Nucleic Acid Extraction System The Perkin Elmer Chemagic 360-D is an automated benchtop system for the isolation of nucleic acids (DNA and RNA) from a wide range of sample materials. It uses Chemagen's magnetic bead technology to extract high-purity nucleic acids for various downstream applications. Key Features and Specifications Technology: The system is based on the patented Chemagen M-PVA magnetic bead technology. Metal rods are magnetized to collect the beads containing the bound nucleic acids and transfer them between different process solutions, minimizing cross-contamination. Sample Volume Flexibility: It offers different "Rod Heads" for different volume ranges and throughputs: 12-Rod Head: For sample volumes from 1 mL to 10 mL. 24-Rod Head: For sample volumes from 200 μL to 4 mL. 96-Rod Head: For sample volumes from 10 μL to 400  ...

Compact device for automated nucleic acid purification The Perkin Elmer Chemagic 360 is an automated benchtop system for isolating nucleic acids (DNA and RNA) from a wide range of sample materials. It uses Chemagen's magnetic bead technology to extract high-purity nucleic acids for various downstream applications. With dimensions as small as 80 x 80 cm and its unique sample volume flexibility, the Chemagic 360 is an innovative instrument that can be adapted to almost any of your nucleic acid purification needs. Utilizing the proven M-PVA Magnetic Bead technology, the Chemagic 360 delivers high yields of high-purity nucleic acids suitable for a wide range of downstream applications such as NGS, MLPA, genotyping, and PCR. Features at a glance • Optimized design to avoid cross-contamination • Sample volume from 10 μl - 10 ml • Throughput from 96 to 4000 samples per  ...