elevator becherwerk used for sale

Bread line Kemper Imperator + bucket elevator + round and long moulder - Bread plant from Kemper - with Kemper Imperator dough divider - with Kemper bucket elevator - with Kemper round and long mould SU-S

tower silos 4 x 50 m³ / 50000 litres of polyester tanks / Tower silos / flour silos, GRP silos, grain silo / hopper silo / compound feed component silo Top condition Content per silo: 50 m³ / 50000 litres piece / pc: 4 pieces Year of construction: 1994 mass of Tower silos without steel: approx. Ø 2,80 x 12 m high Height of the entire system: 21 m Density/weight: 1,200 kg per m³ approval number: Z 10-22-42 Manufacturer: Polem More details: the silos are in good used condition. According to the age traces are present. The system has complete works until its closure. The system could not be tested yet, because there is no power supply. It is a complete meal silo plant with very thick-walled 4 x 50 m³ GRP silos with a density/weight 1200 kg per m³ is each silo separately to fill up the tanks through several cross conveyor (scraper conveyors). The silo is a spray head to cle ...

Alan Ruddock Grain Elevator Malt Intake Hopper - approx. 100kg capacity Inclusive of a manually operated slide Non-standard finish (metallic bronze 56) Grist Elevator - 2.5 m o/a height. As shown in drawing. Inclusive of polypropylene buckets, stretch resistant belting, and a three-phase geared motor. This is a SECOND HAND item and is sold as seen. For more information and more available stock please visit us at - advancedbrewing.co.uk

Used Used Caps Elevator 3.000 bph Marmoinox 2016: Year: 2016 Condition: Good Used Caps Elevator 3.000 bph Marmoinox 2016: Model: alm-zve1 Year: 2016 Speed: 3.000 BPH Type of workable cap: Plastic pre-threaded cap Type: pneumatic Measurements-overall dimensions of machinery: 2100 mm x 750 mm x 3000 mm (h) Safety protections Code: I 78 More details: https://bottlingscout.com

Type: Ruhle SR2 with Elevator Loading sections (L x W x H): 500x120x200 mm Cutting length: 1,0 – 30,0 mm Saw blades 1 set Capacity: up to 1800 kg/hour Electric power: 3.5 kW Machine dimension in cm: Width: 70 cm Lenght: 180 cm Height: 125 cm Delivery time: 10 working days after advanced payment

Type: Holac VA 90 Loading sections (L x W x H): 400x100x80 mm Cutting length: 1,0 – 30,0 mm Saw blades 3 set, 4x4 mm, 10x10 mm, 18x18 mm Capacity: up to 2500 kg/hour Electric power: 8.0 kW Machine dimension in cm: Width: 180 cm Lenght: 90 cm Height: 225 cm Delivery time: 10 working days after advanced payment

5 elevators galvanized or painted, length from 8 to 24 meters, capacity 80 t/h to 200 t/h Tel. 01715213204

was in action behind a 2019 FOSS Inline Fat Analysis System Meat Master(TM) II,, for raw meat,, designed to be mobile,, effective width: 400 mm,, feeding distance: 820 mm,, gradient: approx. 60° - length: approx. 3,800 mm,, Delivery height: approx. 2,500 mm,, Delivery distance: approx. 930 mm,, Lug width: 400mm, Stud height: 50mm, Cleat pitch: approx. 200mm, Hygienic version with central scaffold tube. The construction is very open. The belt is removed using round material. Drive and deflection stations are designed with sheet metal parts. In the lower run the, Belt worn by rollers. The conveyor is equipped with a quick clamping system. Thus, the belt can be lifted for cleaning or removed from the side. The belt is positively driven and, also forced, Support:, with rectangular tube support frame with castors, Product Tours:, Plastic profiles swiveling on both sides, Clear width = stud w ...

For the height conveying of closures

Total height: 5100 mm Total length of the lower horizontal part: 3600 mm Total length of the upper horizontal part: 4777 mm Number of entries: 2 Number of intermediate outlets: 1 Chain speed: 19.9 m/min Chain length: 40 m Cup Type: 33 PP Further information can be found in the data sheet.

Mixing system on steel construction with ring trogm (150 l. useful filling, 5.5 kW drive, 0.55 kW motorized outlet), bucket lift (1.5 kW drive, incl. winch, rope and rails) and control cabinet. Hardly used after revision, very good condition.

Size max 1.120 x 1.620 mm Lifting height max 1.040 mm lifting capacity 1.000 kg Weight 490 kg (approx.)

K.S. Automatik elevator from 2006. Conveyor width: 160mm Year of production: 2006 Serial number: 7 Condition: good Dimensions: 1.300mm x 600mm & 1.300mm (LxW&H)

Nominal rating 1000 kg/h Motor rating 0,37 (0,5) kW (PS) Connected load 230V 50Hz (single-phase) Electrical protection 16 A Length 2500 mm Width 700 mm Height 2100 mm Discharge height 800 mm Weight 150 kg Material 1.4301 / AISI 304 Connection for cleaning ½\" inside Connection for washing vessel 1½\" outside Height fruit outlet 1750 mm ; new machine - top condition

Pack Service (Marchesini) PS 233 elevator for plastic containers, caps etc, with hopper 400 x 400 (LxW) and 1000mm from the floor, flighted elevator conveyor approx 340mm wide, with flights 240mm wide x 40mm high. Discharge height adjustable between 1100mm and 1200mm. Weight approx 250kg.

Stacklift Polar LW 1200-6; cleaned and tested; 2 pcs.available; Load capacity 1200kg; Format 1050x1480mm. Pile lift Polar LW1200-6; cleaned and checked; two on stock; lifitng capacity 1200kg; size 1050x1480mm.

New lift elevator motor because a insolvency to a special price - Manufacturer: LOGOS Innovationen GmbH - Type LDS-320 - Asynchronous motor 15KW Manufacturer EMOD - Belt drive 4 belts - Speed 1m / s - Suspension 2: 1 - Payload 1250 Kg - 2 magnetic brakes from Mayr 2x550Nm braking force - including test protocol

Slanted elevator with Rätzmühle RM4 Technical data: Nominal output up to 3 000 kg/h Power: Slanted elevator 0.55 kW Mill 4/3.3 kW Circumcate pump 2.2 kW Electric connection 400V 50Hz (3 phases) Electrical protection 32 A Dimensions: Length 3 540 mm Width 935 mm Height 2 585 mm Discard or drop-in height 850 mm Weight 350 kg Material 1,4301/AISI 304 Connections: Connection for cleaning 1/2 "inside Connection for washing containers 2 "outside Height corn chee-ejection 1 570 mm Can be used for nuclear and stone fruits, berries, vegetables Delivery 7 mm, 9 mm and 12 mm cutting sieve

Angular cup unit, elevator, continuous conveyor used Manufacturer: GOUGH ENGENEERING Height approx. 7 m Shaft approx. 900 x 630 mm Stainless steel chain Plastic cup approx. 600 x 220 x 130 mm Gearmotor North 1.5 kW Thanks to our own special machine construction, changes are also possible according to your wishes. Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

Angular cup unit, elevator, continuous conveyor used Manufacturer: GOUGH ENGENEERING Height approx. 7 m Shaft approx. 750 x 620 mm Plastic chain Plastic cups approx. 450 x 200 x 120 mm Gearmotor Bauer 0.75 kW 27 rpm Thanks to our own special machine construction, changes are also possible according to your wishes. Subject to changes and errors in the technical data, dates and prices as well as intermediate sale. Search terms: Becherlevator, Becherwerk, Winkelbecherwerk