elektra tailfingen used for sale

Universal cylindrical grinding machne TACCHELLA ELEKTRA-Evo 1018 MPC - FANUC 21i MPC, Information about technical data are not binding., Machine available subject to prior sale., Height centres: 180 mm, Distance between centres: 1000 mm, Wheel dimension: 508x80x203,2 mm, Wheel speed: 2000 rpm - Variable and programmable, Spindle motor power: 8,2 Kw, Internal grinding spindle speed: 30.000 rpm, Weight: 6.500Kg

Description Small compressor Elektra Beckum Basic Euro from 2003 very robust, mobile piston compressor – suitable for small and diverse commercial applications for single-phase alternating current with pressure reducer for controlled working pressure Technical data Intake capacity: 220 l/min Filling capacity: 110 l/min Max pressure: 8 bar Nominal intake power: 1.1 kW Speed: 2,850 /min Voltage: 230 V Boiler size: 24 l Weight: 21.5 kg Dimensions: 600 x 260 x 660 mm

TACCHELLA ELEKTRA 1518 MPC CNC grinding machine was built in Italy in 1999. Characterised by high reliability and performance, the machine is used in the process of highly accurate grinding of the external rotating surfaces of workpieces with a maximum length of 1500 mm and a diameter of 350 mm. The TACCHELLA CNC shaft grinding machine has a large workspace with tailstock, grinding wheel spindle and workpiece spindle. After placing a shaft with a maximum weight of 50 kg in the spindle holder, the workpiece is ground at high speed by an incremental encoder driven grinding wheel with a maximum diameter of 450 mm. In order to simplify the machining process, the ELEKTRA 1518 MPC CNC grinding machine is equipped with state-of-the-art features, such as the HOFLER BALANCE SYSTEMS VM 24 operator panel and a functional and user-friendly FAGOR CNC controller, which allows full control of the m ...

Refurbished

Auxiliary switch, circuit breaker, miniature circuit breaker, load break switch, load isolator, circuit breaker, circuit breaker, auxiliary switch, main switch, on-off switch, cam switch -Manufacturer: Elektra, Motor switch on-off switch -Type: TAT 16 -Dimensions: 130/120/H75 mm -Weight: 0.3 kg

rated capacity: . kVA capacity in kVA: . kVA Heating capacity: . kW power fuel: . 0 weight of the machine ca.: . t dimensions of the machine ca.: . m Construction site electricity distributor 550 x 400 x 1350 The techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

used DC shunt motor 18 kW Anchor voltage 460 V 45 A 3000 rpm with filter fan and tachogenerator can be installed as B3 or B5 Collector and carbon brushes top

Technical details: - Table length: 520 mm - Table width: 420 mm - Table width with mounted extension: 600 mm - Table height: 875 mm - Max. diameter of the table opening: 160 mm - Spindle diameter: 30 mm - Max. diameter of the milling tool: 150 mm - Spindle speeds: 4,000 / 6,000 / 7,500 rpm - Height adjustment of the spindle: 12 cm - Height of the milling fence: 125 mm - Diameter of suction nozzle: 100 mm - with pressure device - with 1 x milling tool (diameter 95 mm) Engine data: - Voltage: 400 V - Current: 4.0 A - Frequency: 50 Hz - Power: 1.8 kW - Speed: 2,800 rpm Dimensions (LxW): 600 x 420 mm Transport dimensions (LxWxH): 800 x 600 x 1,300 mm The machine has been completely cleaned in our company and checked for correct functioning. It is supplied with a mounted connection cable with a 16A plug (integrated phase changer). (Subject to changes and error ...

FERROMATIK MILACRON ELEKTRA 155 injection moulding machine manufactured in 2003 in Germany after a general overhaul at a total value of approximately 14290 EUR. During the 2024 overhaul, components such as the clamping system drive screw, belt pulley, drive belt, lubrication system sensor, clamping pins, pan and drive belts in the plasticising unit were replaced. In addition, both motors in the plastification unit were refurbished and a periodic column tension check was carried out with the GEFRAN strain gauge system. The FERROMATIK MILACRON EE155 injection moulding machine is the perfect choice for the mass production of plastic parts of different colours, shapes and sizes by injection moulding. The machine’s high-performance components significantly enhance any, even the most intensive, machining process. These include an electric drive, which, compared to a hydraulic drive, offer ...

Distance between points: 1000 mm, Ø max to be rectified: 350 mm, Max travel Z axis: 1.180 mm, Max travel X axis: 350 mm, Height of points: 180 mm, Ø max to be rectified with the left wheel: 350 mm, Left grinding wheel dimensions (od x id x width): Ø450xØ203x80 mm, Working wheel dimensions (od x id x width): 508x203.2x80mm, Right grinding wheel dimensions (od x id x width): Ø300xØ127x40 mm, cnc brand: FANUC, cnc model: 18TC, Main engine power: 7.5 Kw, Maximum weight between points: 120 Kg, Total installed power: 15 KW, Standard peripheral speed: 45 m/s, Automatic grinding head rotation with Hirt 2.5º: +5º_-180º, B axis control system: Incremental encoder + 2.5º Hirt ring, B axis motor: 2.5 Nm at 3000 rpm, X axis speed: 10,000 mm/min, X axis resolution: 0.0005 mm, Z axis speed: 10,000 mm/min, Z axis resolution: 0.005 mm, Z axis table rotation: 0º_9º, Workpiece head cone: MORSE  ...

GENERAL Project No.: 905670 Quantity: 1 pcs. Manufacturer: TACCHELLA Type: Elektra 1018 MPC Control: MPC Year of Make: 1999 Condition: Used machine Layers approx.: less than 1 layer DESCRIPTION CYLINDRICAL GRINDING Max. grinding diameter 350 mm Max. grinding length 1000 mm Center height 180 mm Center width 1000 mm GRINDING SPINDLE UNIT Travel in X/Z 350/1180 mm Max. rapid traverse speed in X/Z 10/10 m/min Grinding headstock can be swivelled manually Belt-driven grinding spindle for external grinding wheel right with max. diameter x width x bore 400x50x127 mm left with max. diameter x width x bore 450x80x203 mm Max. circumferential speed 35 m/s2 Max. power at ED 10-40/100% 7.5 kW Mounting MK5/ASA4 TAILSTOCK Tailstock can be moved manually Tailstock quill holder MK4 Cylinder Fine Adjustment Tailstock Manual Dresser with dressing tile on tailstoc ...

Key data: 90 KW, 1485 1/min

TECHNICAL SPECIFICATIONS Manufacturer: ELEKTRA Elektromotoren Dillingen Description: Electric drive motor Type: IEC squirrel cage motor (EN 60034) Power: 90 kW Speed: 1485 1/min Frequency: 50 Hz Standard voltage: 400 V Design: IM B3 Degree of protection: IP 55 Weight: 580 kg SPECIFIC COMMENT - Incl. 1 flywheel extra

grinding diameter: 350 mm grinding length: 1000 mm centre height: 180 mm Control: Fanuc 180-T grinding wheel width: 80 (100) mm grinding wheel diameter: 450 mm power capacity - grinding motor: 7,5 kW table speed -stepless-: 10 m/min grinding spindle head - swivable: +5 / -180 ° turning speed range - workpiece spindle: 10 - 800 U/min grinding head swivelling: 0 - 15 ° workpiece weight max.: 120 kg taper in tailstock-quill: MK 4 tailstock quill stroke: 35 mm dressing device: voltage: 400 V total power requirement: 18 kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 3,75 x 2,25 x 1,80 m band filter unit: 1,75 x 1,20 x 0,80 m - Serial No.6769 - Universal Cylindrical Grinding Machine with internal grinding spindle - CNC-controlled B-Axis for automatic. swivel of spindle head The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sawblade tiltable: . ° cutting width: . mm Motor output: . kW The technical data is manufacturer or operator information and is therefore not binding for us. We reserve the right to sell the goods prior to sale, our terms and conditions of business and sale apply exclusively. About us more than 400 of our own machines in stock over 12,000 m² of storage space, crane capacity 70 t more than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dust suction hood: x mm Motor output: x kW Air consumption: 2000 m³/h Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 10 bar liter capacity: 1400 m³ / min dimensions: 700 x 550 x 1100 mm total power requirement: 11 kW weight of the machine ca.: 275 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

V. Bandsäge, Fabr. Elektra Beckum, Type BAS 315/4 Year of Make: 1994 Projection 315 mm Saw blade length: 2240mm Voltage: 220V Cutting depth: 170mm Accessories: saw blades, length stop, angle adjustment for mitre cuts

Circular saw Elektra Beckum PKU250, good condition, year 2004, standard equipment, 2.7 kW S6, 83 mm cutting height, 1800 mm format table length, 800 mm table length, 800 mm table width, approx. 75 kgPrices subject to change, errors, printing and typesetting errors excepted

This FERROMATIK ELEKTRA 180 was manufactured in 2007. It features a screw diameter of 45-50 mm, injection pressures up to 2494 bar, and a clamping force of 1800 kN. The machine dimensions are 5.8 × 1.85 × 2.2 m, and it has a total connected load of 33.8 kW. If you are looking to get high-quality injection moulding capabilities, consider the FERROMATIK ELEKTRA 180 machine we have for sale. Contact us for more information about this machine.

Compressed air tank, pressure vessel, pressure tank, compressed air reservoir, compressor tank, compressed air reservoir, compressed air storage tank, compressor tank -Manufacturer: Elektra-Beckum, compressed air tanks, compressed air storage -Contents: 150 L -Operating pressure: 11 bar -Dimensions: 1460/510/H530 mm -Weight: 92 kg

Auction-ID: A1-45239-2217

Auction-ID: A1-45239-2170

In gitterbox ( 1020x830x720 mm )