electrical products used for sale

A total of explosion-proof 6 low-lift and high-lift trucks as well as 6 manual pallet trucks from the manufacturers Jungheinrich, Still, and Hawker are available.

Tailstock, counter bearing for dividing head, dividing attachment -Tailstock comes: from a Ramo a42 lathe -Quill: electrically driven -Motor: 220/380 V 0.18 kW -Spindle stroke: 300 mm -Recording: MK4 -Dimensions: 790/550/H580 mm -Weight: 98 kg

-Testing device for electrical equipment -each with isolation transformer -Number: 7 available -Price: per piece

OMEGA CM43 Submerged EDM The OMEGA CM43 submerged EDM is still connected and working perfectly. This machine achieves the highest precision and is an ideal choice for smaller workshops. Working area (mm) 500 x 350 x 300 Electrode size (mm) 100 x 100 x 100 Capacity (kg) 70 Electrode mass (kg) 10 Axis travel: X430, Y320 mm dieletric tank: T4 model power supply: 50A Omega Pulse

Consists of control cabinet No. 1- 1-3 No. 2 - 4-6 No. 3 - 7

Auction-ID: A1-46614-7

Auction-ID: A1-46614-23

Complet Electric cabinet with content Auction-ID: A7-46756-96

Complet Electric cabinet with content Auction-ID: A7-46756-95

Auction-ID: A1-46617-34

Auction-ID: A7-46691-42

This FANUC ROBOSHOT S-2000 i 150B was manufactured in 2012. A pristine electrical injection moulding machine, it has never been used, maintaining zero working hours. It features a 52 mm screw diameter. Consider the opportunity to buy this FANUC ROBOSHOT S-2000 i 150B electrical injection moulding machine. Contact us for more information.

This FANUC Roboshot S50iA was manufactured in 2016. It is an electrical injection moulding machine with a closing force of 50 tons and a screw diameter of 20mm. Consider the opportunity to buy this FANUC Roboshot S50iA electrical injection moulding machine. Contact us for more information.

This SUMITOMO SHI DEMAG Intelect 2 50/370-110 was manufactured in 2020. It features a fully electric direct-drive system, NC5+ control for enhanced energy efficiency, and precise injection dynamics. Includes a granule dryer, industrial robot, conveyor belt, and temperature units. Ideal for high-quality injection moulding processes. Contact us for more information about this machine.

Switch and distribute plug. Auction-ID: A1-47074-47

This Engel duo 2400/650 electrical injection moulding machine was manufactured in 2019. It features a screw diameter of 60/70/80 mm, a screw stroke of 315 mm, and a maximum injection capacity of 890 cm³. The clamping force reaches up to 6500 kN with a maximum mold weight of 11000 kg. Consider the opportunity to buy this Engel duo 2400/650 electrical injection moulding machine. Contact us for more information about this machine.

Auction-ID: A1-46943-20

This Milacron Elektron Evo 350 was manufactured in 2017. A robust electrical injection moulding machine featuring a screw diameter of 70 mm, closing force of 350 T, and a shot weight of 1172 g. It supports mold sizes between 249 – 800 mm and has minimal usage with only 235 testing hours. Contact us for more information about this machine.

This HAITIAN ZHAFIR ZERES ZE1900 was manufactured in 2018. It is an electrical injection moulding machine, ideal for precision and efficiency in plastic processing. Consider the opportunity to buy this HAITIAN ZHAFIR ZERES ZE1900 electrical injection moulding machine. Contact us for more information.

This SUMITOMO SHI DEMAG El-Exis SP 350/820-920 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 40 mm and a clamping force of 3,500 kN. It has operated for 17,716 hours with 12,440,761 cycles, ensuring extensive production capabilities. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis SP 350/820-920 electrical injection moulding machine. Contact us for more information.

This FANUC Roboshot S100iA was manufactured in 2014. It features a closing force of 100 tons and a screw diameter of 26mm. Weighing 4.4 tons, it operates on a power supply of 200 V~50/60 Hz or 220 V~60 Hz. Consider the opportunity to buy this FANUC Roboshot S100iA electrical injection moulding machine. Contact us for more information.

Indoor crane, crane, electric wire rope hoist, manual trolley, push trolley, crane trolley, trolley undercarriage, crane undercarriage, trolley, girder undercarriage, overhead track undercarriage -Crane chassis: with electric drive -Chassis: Type STC 10 load capacity 1050 kg -Gear motor: Leroy Somer 0.25 kW -Travel speed: 22/5.5 m/min -Carrier width: up to 225 mm -Dimensions: see photos / technical drawing -Dimensions: 555/230/H185 mm -Weight: 25.4 kg

Workbench, work table, assembly bench, assembly table, worktable, mobile workbench, sewing machine table -Work table: Electrically height-adjustable work table, solid construction with casters -Tabletop: 1400 x 700 mm -Height: 810 to 1180 mm -Drive motor: Baifu 51K120GU-CM-P 230V 120W -Base: 4 swivel casters with locking brakes -Transport dimensions: 1400/700/H810 mm -Weight: 62 kg

This FERROMATIK ELEKTRA 180 was manufactured in 2007. It features a screw diameter of 45-50 mm, injection pressures up to 2494 bar, and a clamping force of 1800 kN. The machine dimensions are 5.8 × 1.85 × 2.2 m, and it has a total connected load of 33.8 kW. If you are looking to get high-quality injection moulding capabilities, consider the FERROMATIK ELEKTRA 180 machine we have for sale. Contact us for more information about this machine.

Agie Wire Cutting EDM Machine High-Precision Wire EDM System This 2018 Agie AC Progress VP3 represents top-tier wire electrical discharge machining (EDM), offering flawless contour accuracy and superior surface finishes for critical components. Technical Details ‍ 1. Machine identification data Name: Wire Cutting EDM Machine (Electric Discharge Machining) Manufacturer: Agie Model: AC Progress VP3 Machine number: 591.3.020.530 Year of manufacture: 2018 2. Operational parameters Travel (X / Y / Z): 500 x 350 x 426 mm Travel (U / V): ± 70 mm Max. taper angle: 30° at 100 mm height Max. workpiece dimensions (X / Y / Z): 1050 x 650 x 420 mm Max. workpiece weight (without water): 400 kg Max. workpiece weight (with water): 800 kg Wire diameters: 0.15 – 0.33 mm Generator: IPG-VPC Max. cutting rate: > 500 mm²/min Best surface roughness: Ra 0.2  ...

This FANUC Roboshot S100iA was manufactured in 2021. It features a 100 ton clamping force, ideal for precision electrical injection moulding. Consider the opportunity to buy this FANUC Roboshot S100iA electrical injection moulding machine. Contact us for more information.

Agie Wire Cutting EDM Machine Precision Wire Cutting EDM Machine A staple in advanced toolmaking, this 2006 Agiecut Progress V3 delivers highly reliable and accurate wire EDM capabilities for intricate metal cutting applications. Technical Details ‍ 1. Machine identification data Name: Wire Cutting EDM Machine (Electric Discharge Machining) Manufacturer: Agie Model: Agiecut Progress V3 Machine number: 333.010.008 Year of manufacture: 2006 Control: AGIEVision 5 2. Operational parameters Working area (X / Y / Z): 500 x 350 x 426 mm U-V Axis: +/- 30° / +/- 70 mm Max. workpiece dimensions (L x W x H): 1,050 x 650 x 420 mm Max. workpiece weight (with/without Dielectric): 800 kg / 400 kg Resolution of axes: 0.0001 mm Positioning speed: Up to 3 m/min Clamping system: Universal beams with fixing holes Cutting wire diameter: 0.2 – 0.33 mm  ...

This Husky HPETL230E-RSE95D-95 was manufactured in 2015. It is an all-electric injection molding system with a maximum throughput of 390 kg/h PET and a max shot weight of 2424 g PET. The clamping unit is fully electric with a toggle drive, and it features an integrated control system for additional equipment. Consider the opportunity to buy this Husky HPETL230E-RSE95D-95 electrical injection moulding machine. Contact us for more information about this machine.

This FANUC Roboshot S150iA was manufactured in 2016. It is an electrical injection moulding machine featuring a screw diameter of 36mm and a closing force between 150-180 tons. It operates on a power supply of 200 V∼50/60 Hz or 220 V∼60 Hz. Consider the opportunity to buy this FANUC Roboshot S150iA electrical injection moulding machine. Contact us for more information.

This Milacron ELEKTRON 75 was manufactured in 2011. It features a screw diameter of 18 to 32 mm and a clamp force of 750 kN. The machine dimensions are 4.36 × 1.42 × 1.95 m, and it weighs 4700 kg. If you are looking to get high-quality injection moulding capabilities, consider the Milacron ELEKTRON 75 machine we have for sale. Contact us for more information about this machine.

amount of capping heads: 1 capacity / hour ca.: 450 working direction: semi automatic bottle height min. [mm]: 350 cap sorting system: Vibrating container Strom / Volt: 220 weight [kg.]: 90

This SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 50 mm, clamping force of 3,500 kN, and tiebar spacing of 820 mm. It has operated for 18,138 hours with 12,875,090 cycles. If you are looking to get high quality moulding capabilities consider the SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 machine we have for sale.Contact us for more information.

Metal cabinet with sliding door, filled with various industrial electrical components. Auction-ID: A7-46756-12

This SUMITOMO SHI DEMAG IntElect 220/610-750 smart was manufactured in 2013. Its an electrical injection moulding machine known for its precision and efficiency. Ideal for those looking to enhance their production capabilities with reliable technology. Contact us for more information.

Large batch of various electrical components, Erco 3-phase adapters, Wieland connector components, etc. and screws as well as 32A extension cable all from a stock liquidation of a special luminaire manufacturer with lattice box Auction-ID: A1-46862-145

Lot Installation sockets for fluorescent tubes, light bulb sockets and other electrical components packed on three pallets around outer carton Versions: BJB and Vossloh Version: T5, T8, energy-saving lamps, low-voltage etc all from a warehouse clearance of a luminaire manufacturer, all unused Auction-ID: A1-46862-143

This Arburg 470 E 1000-700 was manufactured in 2011. A robust electrical injection moulding machine, it features a closing force of 100 tons and a screw diameter of 25mm. Operating on 400V 3∼, 50Hz with a total connected load of 78kW, its designed for efficient performance. Consider the opportunity to buy this Arburg 470 E 1000-700 electrical injection moulding machine. Contact us for more information.

set of 9 ABB electrical cabinets Please inspect Auction-ID: A1-46676-11

This FANUC Roboshot S150iA was manufactured in 2015. Its an electrical injection moulding machine with a closing force of 150-180 tons and a screw diameter of 36mm. Weighing 4.4 tons, it operates on a power supply of 200 V∼50/60 Hz or 220 V∼60 Hz. Consider the opportunity to buy this FANUC Roboshot S150iA electrical injection moulding machine. Contact us for more information.

Voltage tester BENNING Duspol Expert 12 - 1,000 V AC/DC, multimeter BUSCHING 100398, cable lug pliers SW STAHL, multimeter KS TOOLS 150.1495, cable lugs, pliers, contents of cabinet WS 2, drawers Elektro 1 and Elektro 2

This Husky E 3150 RS 170 155 was manufactured in 1997. It features a clamping force of 31,500 kN, a screw diameter of 155 mm, and a shot weight of 9,642 g. Ideal for large-scale production, it has a stroke volume of 13,205 cm³ and an injection pressure of 1,636 bar. For more information about this machine, please reach out to us.

Includes a professional GOSSEN METRAWATT testing device for safety testing of electronic devices , a BROTHER P-Touch 9800PCN label printer, an ISO-TECH laboratory power supply , a ZEBRA ZT-230 thermal transfer industrial printer, an HP docking station, an adjustable laboratory power supply and other equipment Auction-ID: A1-46981-194

This HAITIAN ZE1900 was manufactured in 2019. It features a clamping force of 1900 kN, a maximum injection volume of 412 cm³, and a screw diameter of 50 mm. The machine includes a robot interface (Euromap 67) and is still in production with excellent condition. If you are looking to get high-quality injection molding capabilities, consider the HAITIAN ZE1900 machine we have for sale. Contact us for more information about this machine.

This SUMITOMO SHI DEMAG IntElect 220/610-750 smart was manufactured in 2013. Its an electrical injection moulding machine known for its precision and efficiency. Ideal for those looking to enhance their production capabilities with reliable technology. Contact us for more information.

Bystronic Bystar 4020 – Electrical Cabinet Manufacturer: Bystronic Laser AG (Switzerland) Model: Bystar 4020 Year of manufacture: 2000 Originally used for machine no.: 1260 Type: Main electrical control cabinet Scope of delivery: Electrical cabinet with installed electronic boards and components as shown in photos Condition: Used, dismantled from machine Function: Not tested after dismantling Remarks: Sale includes only the components visible in the photos. Auction-ID: A7-47063-10

This Toyo Si-350-6S JH750E-PACK was manufactured in 2022. It features a clamping force of 3430 kN, screw diameter of 60 mm, and an injection speed of 300 mm/s. With a total installed power of 85.6 kW and dimensions of 8073 × 1930 × 2397 mm, it represents a robust choice for precision molding. Contact us for more information about this machine.

This concerns an unused product, consisting of article number: 430050, EQLQ 3G1.5. 50M ring installation cabel, quantity: 39, article number: 176002701, Socket normal E27 White 1 pcs pkg, quantity: 1, article number: 1760310101, Junction Box 5-pole, quantity: 7, article number: 1760310116, Terminal block 2.5 to 4 KV 5-p, quantity: 15, article number: 1760310310, Clamps Stainless JR10MM, quantity: 86, article number: 1760310311, Clamps Stainless JR14MM, quantity: 11 Auction-ID: A1-45624-109

The machine is in good technical condition, after prior agreement it is possible to test it. Workpiece weight (max.): 1,000 kg X-axis travel distance: 600 mm Y-axis stroke: 400 mm Z-axis stroke: 310 mm Wire diameter (max.): 0.3 mm Workpiece height (max.): 310 mm Width (max.): 1,050 mm X-axis feed: 600 m/min Y-axis feed speed: 1,000 m/min Table load: 1,000 kg Equipment: refrigerator, compressor

Electrical injection moulding machine manufactured in 2017. This Negri Bossi ELE 80 features a clamping force of 800 kN and a maximum opening stroke of 515 mm. The machine offers a tie bar distance of 420 × 420 mm and a platen size of 595 × 595 mm. If you are looking to get high-quality injection moulding capabilities, consider the Negri Bossi ELE 80 machine we have for sale. Contact us for further details.