electrical products used for sale

For sale: electrical cabinet producer Krones 400 V 50 Hz 103A ICW/ ICU : - / 35k A

Electric stair climber Payload 200 kg Work safely and effortlessly Suitable for step heights up to 210 mm Robust aluminium housing foldable / fold-out incl. charger one battery charge is sufficient for approx. 1600 steps suitable for indoor and outdoor use Weight incl. batteries approx. 30 kg

used very little (max 4000 hours) and are in excellent condition. ORC turbine of 160 kW electrical and about 700 kW thermal, The turbine has approximately 7,500 operating hours. Since 2001, Triogen has been developing and manufacturing systems for conversion Organic Rankine Cycle (ORC) energy conversion systems. The generator TRIOGEN ORC, which has been used in various application areas since since 2005, is similar to a steam cycle, but uses a fluid organic instead of water. Compared with steam, it allows to achieve better performance and efficiencies by exploiting sources of low-temperature heat. The Triogen ORC generator is suitable for the conversion of heat from: + Natural gas engines + Biogas engines + Landfill gas engines + Biomass + Biodiesel engines + Diesel engines + Gas from flares + Gas turbines + Process heat + Furnace heat + Any heat source >350 °C 165 ...

Self-priming screw spindle pump manufacturer from Allweiler Pump with free shaft end incl. electrical heating, 220 V standard coupling Intermediate lantern in GG, drive motor with PTC thermistor in special design Find more here - .ucymachines/ Contact us at - sales@ucymachines

2. Qty. 9 Second-hand slab pit type furnaces Mfc.: Ebner Type: Electrical heated Built: 1970 Stopped: 2019 Power: 600 kW Number of heating units: 5 Weight capacity: 20.000 kg Voltage supply: 380 V, 50 Hz Compressed air: 5 bar Max. temperature: 650 °C Slab number: 7 slabs; 8 slabs, if the width 700 - 800 mm and 10 slabs, if the width 700 mm Slab length: Max. 3300 mm (in furnaces 1 to 5) and Max. 3000 (in furnaces 6 to 9) DIMENSIONS (outer): 2000 x 2580 x 4080 mm – H x W xL

Alternator Brush – Type BEJSN1100 Manufacturer: Brush Electrical Machines Ltd – Loughborough, UK Type: Synchronous Alternator (AC Generator) Exciter: Brushless Exciter, Model XL163.82A Key features: Apparent power: 3125 kVA Voltage: 5,536 V Current: 325 A Frequency: 50 Hz Speed: 1500 rpm Power Factor: 0.8 Connection: Star Phase sequence: W-V-U (counterclockwise rotation view on the drive side) Weight: 7750 kg Cooling: Not specified on plate (to be confirmed) Additional technical details: Insulation class: F (reinforcement), H (rotor) Ambient temperature: 40°C Max. altitude: 430 m Year of manufacture: 1980 Bearing lubrication: Pressure: 1.07 bar Flow rate: 22.5 L/min

Equipment Manufacturer Power Speed Generator BRUSH 3125 kVA 1500 rpm Gearbox Allen Gears 3860 kW 1500 rpm 1Generator Manufacturer: BRUSH Electrical Machines Limited Main SpecificationsParameter Value Parameter Value Type AC Generator Rated Output 3125 kVA Speed 1500 RPM Voltage 10,000 V Current 180 A Frequency 50 Hz Phase 3 Phase Brushless Excitement 2. Gearbox Manufacturer: Allen Gears Limited Location: Pershore, England Type Epicyclic / Planetary Gearbox Technical Specifications Parameter Value Model APG 23 Serial No. X5/40848 Year 1980 Type Planetary Gear Gear Ratio 9.473 Performance Parameter Value Rated Power 3860 kW Duty Power 3355 kW input Speed 14,210 RPM Output Speed 1500 RPM CT INDUSTRY 2 Rue laennec Rosny sous bois 93110 GSM 06 03 86 59 55

Equipment Manufacturer Power Speed Generator BRUSH 3125 kVA 1500 rpm Gearbox Allen Gears 3860 kW 1500 rpm 1Generator Manufacturer: BRUSH Electrical Machines Limited Main SpecificationsParameter Value Parameter Value Type AC Generator Rated Output 3125 kVA Speed 1500 RPM Voltage 10,000 V Current 180 A Frequency 50 Hz Phase 3 Phase Brushless Excitement 2. Gearbox Manufacturer: Allen Gears Limited Location: Pershore, England Type Epicyclic / Planetary Gearbox Technical Specifications Parameter Value Model APG 23 Serial No. X5/40848 Year 1980 Type Planetary Gear Gear Ratio 9.473 Performance Parameter Value Rated Power 3860 kW Duty Power 3355 kW input Speed 14,210 RPM Output Speed 1500 RPM CT INDUSTRY 2 Rue laennec Rosny sous bois 93110 GSM 06 03 86 59 55

Description Item # 9321 - FILLING & DOSING MACHINE FOR FOOD PRODUCTS Manufactured by CARLO MIGLIAVACCA (Italy) Model Number Dosatrice TA240 Year 2013 415Volts, 3.5kW, 50Hz Semi-automatic volumetric mechanical piston filler Ideal for the highly accurate dosing of mango pickles as well as other mixed food products With whole pieces, liquid, pasty, and semi-dense products into glass, metal, or plastic containers 0.3 to 20litre fill levels around 1000 per hour on 3-5Kgs weights Including conveyor

Ref.nr. 00876 Name of the system Used high-bay forklift with 2 batteries UVV grade redone Manufacturer: BT Products AB. Mjölsy Sweden Model C15 Year of construction 2009 Nominal load capacity 1500kg Weight without battery 8330kg Battery Weight Max 1850kg Battery voltage 48 V Operating hours Feb 2024-Jan 2025- 90 hours Description Battery Charger Manufacturer: Jungheinrich AG D-22047 Hamburg Germany SLT 200 JH series Type D400 G 48/180 B-SLT200 Year of manufacture 2007 Eingang Input D400V/3 X20 6A/ 50-60 Hz Number of lines / type 24 PB IP22 protection Output 48V/180A Battery capacity 600-750AH / 7-8.5H There are two batteries. One is from 2017, the other from 2020 (was bought because one was not enough) The second battery from 2020 has a few hours. The forklift is sold with both batteries and the charger. The forklift is sold with both batte ...

Well pump, centrifugal pump, water pump RED JACKET UMP i50S3-S diameter. Ø 120 mm motor: 1.2 kW 220 V

Eillert washer for sinking products

From fine to walnut size particles, bespoke made Perfect for larger companies looking to pack dry ingredients between 15g - 5000g. It's larger motor and hopper capacity means it is a lot faster and works better with companies that need a faster packing solution. Just load your ingredients into the top of the hopper, enter your desired weight on the digital display and the intelligent micro-computer will automatically fill your ingredients into your packaging, in a matter of seconds, with a 1 - 5g degree of accuracy, whilst displaying a count of how many have been dispensed. Filling range 15g-5000g Top Hopper Capacity 32L Pack up to 40 bags per minute Accurate to within 1-5g Works with a large variety of dry ingredients

Power supply unit, converter, power supply, switching power supply -Type: EXI-05030 -Input: 170 - 264 VAC/2.5 A -Output: 5 VDC/30 A -Dimensions: 195/95/H60 mm -Weight: 0.9 kg

Pressure vessel, pressure tank, pressure vessel, -Manufacturer: UM Alloy Products, stainless steel compressed air tank -Type: 316L MAWP 9 BAR -Contents: approx. 5 liters -Permissible operating overpressure: 9 bar -Dimensions: Ø 240 x 300 mm -Weight: 5.3 kg

General SKU300P748 LocationBarneveld CEcheck Main Features Motor3 KW Inlet diameter50 mm L/D20 Specified Features - Double screw extruder Double screw extrudercheck Number of hours567 Screw diameter50mm L/D20 Co-rotatingcheck Number of heating zones:1 Steam heatingcheck Water coolingcheck AC-motor3,0 KW, 230/400 Volt With variable speed drivecheck Number of temperature controllers:1 Used onicecream MaterialStainless steel General MakeAPV Baker Industrial Extruder Division Ltd (UK) Mach.No.WEF960037 724/1 Year of construction1996 With switchgearcheck Floorspace2,6x1,2 M Total height1,6 M Weight1100 KG Technical specs Extra informationscrews form stainless steelPowdered foodsAgrochemicalsPlastic & polymersCosmeticsAnimal feedOther feedDouble screw extrudersAPV ProductsIndustries > Food & Feed > Powdered foodsIndustries > Chemical > AgrochemicalsIndustries >  ...

General SKU304P676 LocationBarneveld MakeAPV Chemical Machinery Ltd TypePGX 30 Main Features Motor4 KW Inlet diameter30 mm L/D10 Specified Features - Double screw extruder Double screw extrudercheck Number of hours19187 Screw diameter30mm L/D10 Co-rotatingcheck Water coolingcheck AC-motor4,0 KW With variable speed drivecheck Screw speed(161rpm) Feeding with hopperdia.340mm x400mm Feeding with metering screwK-Tron T-22 twinscrew, Motor feeder 0,55 KW, Motor agitator 0,18 KW Number of temperature controllers:1 Capacity30 KG/Hr MaterialStainless steel 1.2379 (X153 CrMoV12), Stainless steel General Mach.No.800471 Year of construction1989 With switchgearcheck Floorspace1,8x0,8 M Total height2,2 M Extra Specificationswith extrudermold dia.1mmPowdered foodsAgrochemicalsPlastic & polymersCosmeticsAnimal feedOther feedNew arrivalsDouble screw extrudersAPV ProductsIn ...

General SKU289P494 LocationBarneveld MakeAPV Rosista AS Pressure Working pressure1.7 Bar Main Features MaterialStainless steel Motor3.3 KW Specified Features - Centrifugal Pump Pump:Centrifugal pump: Number of pumps:1 Capacityunknown With motor3,3 kW 220-240/380-420 Volt Ex Centrifugal Pumps MaterialStainless steel General TypeZMH-1 Mach.No.:Unknown, manufacturing tag is missing: Floorspace0,6x0,4 M Total height0,5 M Weight30 KG ATEX designedcheckOils & fatCentrifugal PumpsPaints & coatingsFine chemicalsOther chemicalAgrochemicalsRubberBiotechnologyPlastic & polymersCatalysts & fillersSolventsDetergent & surf.CosmeticsLubricants & oleoDairyBeveragesDyes & pigmentsAPIMinerals & inorganicAPV ProductsIndustries > Food & Feed > Oils & fatPumps > Centrifugal PumpsIndustries > Chemical > Paints & coatingsIndustries > Chemical > Fine chemicalsIndustries > Chemical > Other ...

General SKU226Y681 LocationBarneveld MakeAPV TypeT 4 No.58033 Pressure Working pressure6 Bar Main Features MaterialStainless steel Surface0.5 m2 Specified Features - Plate heat exchanger Plate heat exchangerscheck Heating surface0,5 m² CapacitySide 1: 0,7 l.: Side 2: 0,8 l. Plate sizes± 42 x 450 mm Connections4x 24 mm Max. temperature0 — 155 °C Capacity29 kW MaterialStainless steel 1.4306 (304L) General Year of construction2002 Floorspace0,2 x 0,68 m Total height0,64 m Weight100 kgOils & fatPaints & coatingsPowdered foodsPlate heat exchangersGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalAgrochemicalsRubberBiotechnologySpicesPlastic & polymersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeverag ...

Produkty - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Products Products Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers and Lifts Laminators Offset printing machinery Others Packaging machines Paper drills Perfect binders Pile turners Spare parts Stitching machines Horizon RD-4055 Rotary Die Cutting Machine Renz Mobi 500 Semi-Automatic Spiral Binding Machine Horizon VAC-600Ha + VAC-600Hc + SPF-200a + FC-200a Booklet Making Line Baumann BSB 6L Paper Jogger Baumann BSB 3L Paper Jogger Renz Autobind AB 500 HS + KAS-300 Semi-Automatic Spiral Binding Machine Horizon AF-406A Pharmaceutical Folding Machine Baumann NUP-650 Paper Stack Lift Polar Mohr RA 2 Paper Jogger Perfecta SA-110A Paper Jogger Italdibipa ...

Ladies and gentlemen, can be offered: A conveyor belt system for conterminized products All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of the seller until full payment. intermediate sale, other use, Exploitation and error are expressly reserved. Yours sincere ...

Used packaging machine made by Ulma, model: TF Optima 416. New: 2000.

Filling and packaging lines for sausage products (or plant-based alternatives) in cans, consisting of:, 2 filling lines, Line 1: set up for 125 g - aluminum cans with a can diameter of 73 mm, Line output: approx. 150 cans / min., Line 2: set up for 200g/300g and 400g cans with a can diameter of 99mm., Output: approx. 70 cans / min., Sterilization:, The products were sterilized in full water autoclaves with rotation (5 available) that were overhauled by Trinitas Trading in 2017., 3 labeling and packaging lines:, The labeling and packaging line for 125 g cans consists of a Langguth hot melt labeling machine from 2016 and a virtually unused Wächter packaging system (leased system) from 2022., We will be happy to send you the complete list of all machines belonging to the lines upon request., The machines can also be purchased individually.

Croissant line RONDO, type: SCL - Calibration head - Cutting unit with cutting rollers and guillotine - Winding unit - Comfortable dough weight, seamless dough sheets, relaxation - Cutting separation of the cut-out dough moulds - Gentle winding without pressure on the laminated dough - tightly and loosely wrapped croiccants - Power: Up to 900 pcs per row - Condition: Very good, ready to use - Video in function can be sent Inspection and test run are possible by arrangement.

Line for filling delicatessen products into plastic - trays, consisting of:, Vessel filling system, brand Waldner, type 12.3, year 2011, 2-track (two different formats) – however, only single-track operation is possible., Format section 1: Round cup diameter 100mm (including edge) height 80mm and 60 mm, Format row 2: rectangular cup 185mm long 135 mm wide (incl. edge) 35mm deep, The shells are sealed with film from the roll, Roll magazine about 500mm long, 400mm wide, Space requirement Waldner: approx.: 2,100 m 2,100 mm, Discharge belt of Waldner: approx 1,800 mm, Dosing of liquid and free-flowing components:, The plant has two filling heads, which are filled via piping directly from the boiler., The pipe system can be fully purged., The toad line and Maso – Sinus Pump, type SPS 3, are included in the scope of delivery., Feeding of the multi-head weigher using two belt conveyors:, S ...

Steel products, flat steel, round steel, bar steel, tubes, profile tubes, square tubes, rectangular tubes, sheets, shaped steel, wide flange beams, narrow flange beams, plates, structural steel, rolled steel, drawn steel, I-beams -For our customers in the area, we offer material cut-to-size and contract manufacturing and a large selection of materials in stock -Sheets, pipes, profiles, bars and sections made of steel, stainless steel and non-ferrous metals such as aluminum, brass and gunmetal

Used Bottling Line HDPE for dairy products 7200 bph Used Bottling Line HDPE for dairy products 7200 bph: Structure and Production Capacity The Used Bottling Line HDPE for dairy products 7200 bph processes and bottles dairy products in high-density polyethylene (HDPE) containers. The line operates at a nominal capacity of 7,200 bottles per hour, optimized for a 0.40-liter format. It uses HDPE bottles weighing 19 to 20 grams, each closed with a polyethylene (PE) snap-on cap weighing 3.2 grams. Although the system has remained idle since 2018–2019, technicians completed a full overhaul before decommissioning. As a result, the Used Bottling Line Serac for HDPE remains in good mechanical condition. Container Type and Format Flexibility of the Used Bottling Line HDPE The Used Bottling Line Serac for HDPE handles 400 ml HDPE bottles equipped with snap-on PE caps and sealed with a foil membran ...

Used Processing Line for small dairy products 2000 L/h Milk Reception and Initial Storage The Used Processing Line for Small Dairy Products 2000 L/h begins with a milk reception unit consisting of two Lactofreeze tanks and a receiving pump. Initially, operators channel raw milk into the tanks, where it remains chilled. As a result, the system ensures thermal stability before processing. Furthermore, this setup minimizes the bacterial load while allowing continuous transfer to the pasteurization stage. Pasteurization and Separation Next, the pasteurization phase uses a plate heat exchanger with a retention section and auxiliary systems, all rated for 2,000 liters per hour. Specifically, the pasteurizer rapidly heats and holds milk at a predefined temperature to eliminate pathogens. Then, the GEA WESTFALIA separator—rated at 3,000 L/h—performs cream separation. Simultaneously, the RANN ...

SEVAL is a type of machinery often used in the packaging industry, particularly for filling sachets with a variety of products. Sachet fillers are designed to efficiently fill small, often single-use packets with goods such as powders, liquids, granules, or even solid items., Key Features of SEVAL Sachet Fillers:, - Versatility: SEVAL sachet fillers can handle different types of products, making them suitable for various industries including food, pharmaceuticals, cosmetics, and chemicals., - Automation: These machines are often semi-automatic or fully automatic, enhancing efficiency and reducing the need for manual labor. They can integrate with other packaging systems for a streamlined process., - Speed and Efficiency: SEVAL fillers are designed to operate at high speeds while maintaining accuracy in filling volumes. This is crucial for high-volume production settings., - Precision: Th ...

Location: mezzanine with a floor area of approximately 340m2. Concerns the goods on the entire mezzanine with the exception of lot 249. Auction-ID: A1-48474-250

Including frames for partition walls and steel frames. On and including 3x glass/plate trolley lxbxh 160x100x183cm Auction-ID: A1-48474-225

• Serial number PUP 2377 • Load capacity: 240 kg, • Number of operators in the basket: 1 person, • Working height: 3.63 m, • Non-marking wheels: yes, • Platform dimensions: 1.01 x 0.52 m, Auction-ID: A7-49329-8

• Serial number PUP 3390 • Load capacity: 240 kg, • Number of operators in the basket: 1 person, • Working height: 3.63 m, • Non-marking wheels: yes, • Platform dimensions: 1.01 x 0.52 m, Auction-ID: A7-49329-7

• Serial number PUP 3460 • Load capacity: 240 kg, • Number of operators in the basket: 1 person, • Working height: 3.63 m, • Non-marking wheels: yes, • Platform dimensions: 1.01 x 0.52 m, Auction-ID: A7-49329-9

CFS oil filter, Type: OMR120, Serial number: 60, Year of construction: 2005, Dimensions: 2750 x 1100 x 1700 mm, Power: 3 x 380V, 50Hz, 4.5kW, Weight: 525 kg, Including pallet filterpaper, NN ambient cooling conveyor, Belt width: 950 mm, Belt length: 6000 mm, Belt: eye link belt of 3 mm, Compressed air: 6 Bar, Power: 3 x 380V, 50Hz, 2.7kW, Dimensions: 7600 x 1700 x 2000 mm, Variable speed control, Wanson Thermopac thermic boiler, Type: 200B, Serial number: 9335.56445, Year of construction: 1986, Heating: natural gas, Heating power: 233 kW, Power: 3 x 380V, 50Hz, 7.5kW, Dimensions: 3000 x 2450 x 2600 mm, Installation built into 10ft container, Belt width: 600 mm, Belt: Eyelink belt for extra small products, Frying length: 6000 mm, Heating: Thermal oil, Power: 3 x 400V, 50Hz, 8.6kW, Dimensions: 8700 x 2200 x 3800 mm, Weight: 4250 kg

including tools, accessories, spare parts and new tools Auction-ID: A1-49000-65

equipped with pneumatic fine adjustment and DC drive. Including parts Auction-ID: A1-49000-66

Lot consisting of semi-finished products: A deposit of €440.00 is required in order to place a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. KEEPER Developments - 3845 pieces Keper Finished Molds - 240 Pieces Pedal pad dis240007 - 4024 pieces Embossed Arm M 240 sx - 639 pieces Printed Arm M240 Dx - 34 pieces Printed Arm M240 Sx - 81 pieces Printed Arm M189 Dx - 94 pieces M240 Sx reinforcement dis 240009 - 712 pieces It should be noted that the dismantling and loading operations of the machinery for sale must be carried out exclusively by a specialized external team in charge. The successful bidder will not be able to provide for it independently, but may attend the activities for mere supervision. The related costs, quantified at € 250, will be invoiced directly to the  ...

WOODEN SHELVES FOR BAKERY PRODUCTS Date of manufacture: 2019 Country of origin: ROMANIA General description: Made of the highest quality solid wood for durability and stability. The spacious design allows for generous display of a variety of bakery products. The generous dimensions provide an impressive presence in any commercial space. Dimensions: 1300 x 900 x 2040 mm Auction-ID: A7-49933-13

Package sale of electrical and electrical parts 2x Beckhoff, monitors, type C3640, used 1x Beckhoff Contropanel, type CP7031-0002, used 1x Bosch-Rexroth, Indrat View P19, BTV, used 7x INAT, Echolink 100, used 27x Lumiflex, Passive Mirror, 0-4m, used 10x Lumiflex, Passive Mirror, 0-8m, used 5x Lumiflex, type Areal Transmiter AT-500/2, used 4x Lumiflex, Electronic, used 4x Lumiflex, Light Curtain Electronic, used 4x Siemens S5, used 12x Klöckner-Moeller, fuse disconnector, type GSTa 1, new 8x Klöckner-Möller, fuse socket, PS33/cohlzahl 3, 63A, 660V, New 1x Hydrocompensator, hk 5000 1x Siko Seiki, STP control, Unit STP -300C 1x Sony Monitor

TECHNICAL DATA: Handling System Linear Meters: about 135,38 Working width mm: 600 - linear meter 16,5 Working width mm: 650 - linear meter 29 Working width mm: 670 - linear meter 16 Working width mm: 700 - linear meter 58,4 Working width mm:1030 - linear meter 3,48 Electrical Panels: 03

TECHNICAL DATA: Industrial use

Electrical-Electronic Parts - Heidelberg Maschinen List under PICTURES

SODICK AG40L die-sinking EDM was built in 2011. This highly efficient machine is used for precision electrical discharge machining of workpieces with a maximum weight of 550 kg, enabling complex shapes to be achieved in even the hardest materials. Furthermore, workpieces machined in this way do not require other secondary processes to be undertaken, such as polishing. The installed CNC control has a useful perfect active control” function for simultaneous control of high-speed electrical discharges and axis movements, using 1 Gbit/s serial communication technology. The SODICK AG40L LN2 sinker EDM is offered with extensive equipment, consisting of, among others, an EROWA measuring probe, a 4-position linear tool changer and tooling. The total weight of the machine is 3900 kg. Technical specifications of the SODICK AG40L die-sinking EDM - feed in X/Y/Z axis: 400/300/270 mm - work ta ...

Machining tank inner dimensions (W x D) 1040×780 mm X,Y,Z Strokes 600,400,270 mm U x V axis stroke 80×80 mm Max. taper angle ± 15° (Thickness: 120 mm)

Elektromodul SCHULZ SYSTEMTECHNIK VC210/5 230 V suitable components: EL407, S482, EL873, EL872, EL875, EL876, EL877 used ! Dimensions: 480 x 420 x 130 mm

1. Main Circuit Breaker • Function: General interruption of the power supply. • Brand: Schneider (visible on the centre-right, black). • Type: Tetrapole power circuit breaker. 2. 2 Siemens S7-300 PLC • Function: Logical Installation Control (PLC). • Location: Top right. • Visible modules: Power, CPU, input/output (I/O), communication modules. 3. Output Relay / Interface • Function: Interface between the PLC and actuators (lamps, contactors, etc.). • Type: Plug-in relays on blue base. • Location: Just below the machine. 4. HMI + Measurement Module •Function: • HMI (Human-Machine Interface): Display and local control. • Measurement module: Measurement of voltage, current, power, power factor, etc. • Brand: Schneider (PowerLogic or similar). • Location: Top left. 5. Batteries • Function: Emergency power supply or buffer (e.g. ...

1. Main Circuit Breaker • Function: General interruption of the power supply. • Brand: Schneider (visible on the centre-right, black). • Type: Tetrapole power circuit breaker. 2. 2 Siemens S7-300 PLC • Function: Logical Installation Control (PLC). • Location: Top right. • Visible modules: Power, CPU, input/output (I/O), communication modules. 3. Output Relay / Interface • Function: Interface between the PLC and actuators (lamps, contactors, etc.). • Type: Plug-in relays on blue base. • Location: Just below the machine. 4. HMI + Measurement Module •Function: • HMI (Human-Machine Interface): Display and local control. • Measurement module: Measurement of voltage, current, power, power factor, etc. • Brand: Schneider (PowerLogic or similar). • Location: Top left. 5. Batteries • Function: Emergency power supply or buffer (e.g. f ...

Max. workpiece dimensions (W x D x H) 1050 x 820 x 305 mm Max. workpiece weight 1500 kg Table dimensions (W x D) 860x640 mm Machine travels (X x Y x Z) 600 x 400 x 310 mm Machine travels (U x V) ±75 x ±75 mm

1. Main Circuit Breaker • Function: General interruption of the power supply. • Brand: Schneider (visible on the centre-right, black). • Type: Tetrapole power circuit breaker. 2. 2 Siemens S7-300 PLC • Function: Logical Installation Control (PLC). • Location: Top right. • Visible modules: Power, CPU, input/output (I/O), communication modules. 3. Output Relay / Interface • Function: Interface between the PLC and actuators (lamps, contactors, etc.). • Type: Plug-in relays on blue base. • Location: Just below the machine. 4. HMI + Measurement Module •Function: • HMI (Human-Machine Interface): Display and local control. • Measurement module: Measurement of voltage, current, power, power factor, etc. • Brand: Schneider (PowerLogic or similar). • Location: Top left. 5. Batteries • Function: Emergency power supply or buffer (e.g. f ...