elb rotary used for sale

From current stock dissolution: 0172 ABA FF 600 x 300 PU, magnet 600 x 250 mm 1242 ABA FF 350/22, magnet 350 x 150 0906 Z&B FS 2560 PV, SINUSOIDAL MAGNET 600 x 200 1469 ELB 422 NC/K, magnet 450 x 200 1524 ELB SW 6 HA, magnet 510 x 200 1817 ELB Super Ruby, Magnet 650 x 300 5272 ELB Ambassador 6/3, Magnet 600 x 300 4689 BLOHM 204 A, Magnet 450 x 200

Grinding length: 1000 mm Grinding width: 600 mm Grinding height: 600 mm Wheel diameter: 10 mm Spindle power: 10 kW X - Travel:              1000mm Y - Travel:              600mm Z - Travel:              600mm Table Length:            1360mm Table Width:             590mm Table load:              1050 Feed rate X-Axis:        26000mm/min. Feed rate Z-Axis:        26000mm/min. Grinding stone dimensions:400 x 100 x 127mm Power:                   10kW Speeds:                  3000Rpm Feed rate Y-Axis:        26000mm/min. Leng ...

Grinding length: 600 mm Grinding width: 600 mm Grinding height: 220 mm Wheel diameter: 800 mm Spindle power: 28 kW Surface grinderELB - DG-L SWR 60 MACH-ID 7585 Make: ELB Type: DG-L SWR 60 Year: 1988  Max. grinding 800 mm Dressing device Infinitely vario grinding speeds with dro Infinitely vario table speeds Infinitely stroke speed ghrinding slide Infinitely vertical in feed wheel Package with fanches and stones X - Travel:              320mm Y - Travel:              220mm Z - Travel:              320mm Table Length:            600mm Table Width:             600mm Table load:              400 Feed rate X-Axis:        0,01 to 0,2 mm in fee ...

Asynchronous motor, servo motor, with forced fan ELBTALWERK ACHA 132.4-6 ( ACHA 132.4-6 ) 4,5 / 7,5 / 7,5 / 3,6 kW 430 / 690 / 1605 / 2805 rpm 255 / 400 / 400 / 400 V 3AC 23 / 36 / 84 / 143 Hz IP 54 Shaft diameter: Ø 42 mm Wavelength: 110 mm Groove width: 12 mm Flange: Ø 250 / 256 x 256 mm bolt circle diameter: Ø 300 mm hole diameter: Ø 19 mm motor base: 355 x 260 mm hole spacing (parallel to the shaft): 317,5 mm hole spacing ( transverse to the shaft ): 215 mm hole diameter: Ø 11.5 mm forced fan: R2D 220 AC 02-12 ( R2D 220 AC 02-12 ) 0,08 kW 2540 rpm 400 V 3AC New ! Dimensions: 740 x 355 x 345 mm

Brush deburring machine, double grinding stand, deburring machine ELBTALWERK SETr2x350 TGL 16570 Disc diameter Ø max 350 mm Disc width max 40 mm 1,5 kW 1500 rpm 380 V with 2 wire brushes Dimensions: 810 x 450 x 1220 mm

grinding length: 1500 mm grinding width: 900 mm workpiece height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Power supply, power converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, -Manufacturer: Pilz, power supply power supply type P10 APS -Power supply: ELBA-electric type euro power ESPS835515/X -Card block: Phoenix Contact SKBI 64/H15- -Dimension: 120/70/H190 mm -Weight: 0.5 kg/pc.

Tool grinding machine, grinding machine, angle grinding machine, turning steel grinding machine, steel grinding machine -3x grinding wheels: Ø 340 mm, speed 1500 rpm -1x grinding wheels: Ø 170 mm, speed 3000 rpm -max. steel cross section: 80 x 80 mm -Dimensions: 1300/900/H1450 mm -Weight: 500 kg

Double bench grinder, bench grinder, column grinder, column grinder -Motor power: 3.3 kW -Speed: 1400 rpm -Grinding disks: Ø 400 x 50 mm -Operating voltage: 380 volts -Dimensions: 800/1120/H1540 mm -Weight: 434 kg

ID1855 Elba RSK 30C – Star Scraper year/Year of construction 1992 Elba Radialschrapp automat RS/M 40, 17,3 m, 4-part lattice boom for scrapers Elba RS/M 40 radial scraper machine, 17.3 m, 4-part lattice boom for scrapers

Key data: 600 mm, 375 mm

1 Gebr. ELB Precision Surface Grinding Machine, Partially Overhauled Model : Optimal 6375 ND Sanding area : 600 X 375 X 375 mm Grinding wheel : 300 X 50 X 76.2 mm Year of construction : 1990 ACCESSORIES Electric magnetic clamping plate 600 X 350 mm (brand new) Digital display Y (vertical) and Z (horizontal) Hand-held lever dresser Wet grinding device with belt filter with new conveyor chain Grinding wheel holder with grinding wheel Legs Partially repainted and the functions checked. Control panel overhauled. New grinding spindle motor The machine was maintained by us and extensively repaired about 2 years ago.

grinding length: 800 mm grinding width: 550 mm workpiece height: 870 mm total power requirement: 11 kW weight of the machine ca.: 6 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Surface grinding machine ELB 024 VA II without depicted digital display Magnet size 600x260mm Grinding length max. 650mm Grinding width approx. 350mm Coolant system Dimensions: LxWxH 2.3x2x2 meters bcx9w297 Weight approx. 2500Kg

grinding length: 600 mm grinding width: 320 mm workpiece height: 525 mm table surface area: 600x250 mm weight of the machine ca.: 2 t dimensions of the machine ca.: 2,6x1,5x2 m with magnetic clamping plate 600x250 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 800 mm, 400 mm

ELB Perfect 8 PLC, grinding area 800 x 400 mm, grinding wheel 300 x 50 mm, electric perm magnetic clamping plate 800 x 400, dresser with automatic compensation, paper belt filter, the machine is overhauled, grinding spindle remounted, guideways are newly scraped, all functions have been tested, we are also happy to take over the installation / training on site, as well as the subsequent service.

ELB Perfect BD 15 PLC surface grinding machine, grinding area 1500 x 550 mm, grinding wheel 400 x 100 mm, electric perm magnetic clamping plate 1500 x 550 mm, automatic dresser with compensation, paper belt filter, the machine is overhauled, grinding spindle rebeared, guideways are scraped, meets the tolerance of a new machine. We are happy to take over the installation / training on site, as well as the subsequent service

ELB Perfect BD 10 SPS, built in 2003, grinding area 1000 x 400 x 400 mm, the machine was overhauled in 2012 and equipped with the new ELB Easy Grind control, accessories: Electric Perm magnetic clamping plate 1000 x 600 mm, Automatic straight dresser for the grinding wheel mounted on spindle box, with dressing compensation, coolant tank with paper belt filter, suction. The machine is functionally tested and can be viewed under power at our site, we are also happy to take over the installation and training on site.

Key data: 600 mm, 200 mm

Machine number 3414113

Key data: 300 mm, 160 mm

Surface grinding machine

Key data: 300 mm, 160 mm

Surface grinding machine Masch. No. 12 4351

Clamping surface of the magnet 600x350 mm Max grinding width 400 mm Max grinding length 700 mm Max distance of spindle axis from clamping surface Dimensions br. discs (ø x width x clamping hole) 300 x 20-50 x 76 Machine movement speed 2 -28 m/min Automatic transverse feed adjustable 1 – 60mm/Hub Automatic vertical movement 0.002 – 0.06 mm Machine weight approx. 2800kg Machine vagaries approx. 2800 x 1900 x 2400 mm Sander fully functional, can be tested.

The machine is in good technical condition, after agreement the possibility of testing. Grinding range, max. 600 mm. Table Ø / magnetic chuck Ø 600 mm. Workpiece - Swing Ø approx. 800 mm. Table speed, continuously adjustable 20 - 80 rpm. Max. grinding height above the table approx. 300 mm. Vertical movement of the grinding head 220 mm. Transverse movement of the grinding support 320 mm. Max. workpiece weight on the table 400 kg. Vertical feed, automatic 0.01 - 0.2 mm / stroke. Grinding spindle speed, continuously adjustable 1,000 - 2,400 rpm. Grinding wheel Ø, max. 400 x 120 x 76 mm Grinding spindle drive approx. 28 kW. Total electrical load 35 kW - 380 V - 50 Hz. Weight, approx. 4,500 kg.

grinding length: 600 mm grinding width: 375 mm workpiece height: 375 mm magnetic table diameter: 600 x 350 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 2000 mm grinding width: 600 mm grinding height: 620 mm weight of the machine ca.: 8.3 t dimensions of the machine ca.: 5 x 3 x 2.8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Magnetic plate dimensions: 450 x 250 weight approx.: 800 kg, Approx. Onsite Dimension. (l x w x h): 1,900 x 1,600 x 2,000 mm

Description: Magnetic plate dimensions: 700 x 300 weight approx.: 2,500 kg, Approx. Onsite Dimension. (l x w x h): 2,900 x 2,000 x 2,200 mm

Description: Sanding area  ,900 x 375 x 435 mm, serial number 207680988 table surface area l x w : 1550x370 mm, weight approx.: 3,000 kg, Approx. Onsite Dimension. (l x w x h): 4,500 x 2,200 x 2,600 mm

Surface grinding machine, used, with magnetic plate, puller, holders, coolant device, ...

- Grinding length: 600 mm - Grinding width: 400 mm - Workpiece height: 400 mm - Magnetic table: 600 x 350 mm - Dressing device: yes - Grinding wheel Ø: 300 mm - Grinding spindle speed: 1400 rpm - Total power: 6 kW - Machine weight: 3500 kg - Space requirements (W x D x H): 2.0 x 1.5 x 2.2 m Details Automatic delivery in Z, fully functional Accessories Documentation, Machine Feet

A used ELBA scraper is offered. Type: RS/K70, Built in 1991. 13m boom, semi-automatic and fully automatic.

ELB Perfect BD 10 750, grinding area 1000 x 750 mm, year of construction 2004, grinding spindle 10 KW, grinding wheel 400 x 100 mm, automatic dresser with compensation, electric perm magnetic clamping plate 1000 x 750 mm, partial enclosure with suction, water tank with paper belt filter, the machine is partially overhauled, geometry according to the standard of new machine, we are happy to take over the installation / training on site, as well as the subsequent service.

Machine : Grinding Wheel Flange Make : and grinding wheels Type: Inner taper mount Pos. Text Stk. φ φ H- Schleifsφ Schl. B φ A 3 58 74 83 400 approx. 320 B ELB 4, 50, 62, 60, 127, 30-50, 170 C ELB 4 44 60 68 127 20-40 180 D 1 45 60 70 127 30-60 190 E 2 27 34 44 approx. 85 -30 130 F 1 45 60 75 127 -50 190 G 1 29 35 44 ca.85 -30 146 H 1 45 60 75 ca.135 -60 180 I 2 45 60 75 127 30-60 180/190 J 2 27 43 56 127 -40 175 K 3 32 32 55 127 20 158 S Grinding wheel : NEW – for a centerless cylindrical grinding machine, Dilvmit+Kircher D- 10C 100/8 Ps V03 , 406x200x203mm ( 270x25x25) Price: € 200,-

Key data: 1000 mm, 500 mm

GER (License ELB) Surface Grinding Machine Type RS 1000 Condition: very good Table longitudinal travel: 1000 mm Table cross-travel: 500 mm Vertical travel: 500 mm Grinding wheel dimension: 300 x 50 x 76 mm bore Spindle power: 7.5 kW Dimensions: approx: 3,000 x 2050 x 2,400 mm Weight: approx. 4000 kg Accessories: Electro-magnetic panne plate; coolant device; Legs The machine is suitable for repair operation; Repair, toolmaking and is very easy to use. Price net plus VAT plus loading costs

Description: For ISO 40 cones WITHOUT DOCUMENTS weight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,900 mm

grinding length: 1000 mm grinding width: 600 mm workpiece height: 400 mm table surface area: 1360 x 590 mm table speed -stepless-: 2 - 26 m/min table load: max. 1000 kg longitudinal stroke: max. 1100 mm grinding spindle speed: 1400 U/min grinding wheel motor: 10 kW grinding wheel size: 400 x 100 x 127 mm cross feed: max. 2000 mm/min cross adjustment: min. 0,001 mm vertical feed grinding spindle max.: 300 mm/min. vertical adjustment: min. 0,001 mm total power requirement: kW weight of the machine ca.: 6,3 t dimensions of machine L x W x H: 3,90 x 2,58 x 2,70 m Accessories: magnetic plate 1000 x 600 mm, grinding wheel with flange, wheel dressing attachment, wet grinding attachment with magnetic chip separator and paper band filter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length:1000 mm grinding width:550 mm workpiece height:400 mm surface area:1300x450 mm cross feed motor:0,55 kW grinding wheel speeds:1400 U/min total power requirement:18 kW weight of the machine ca.:4800 kg Used / overhauled surface grinding machine, Make ELB, type SWBE 010 NCK, machine no. 163811079 Machine with automatic notification in all 3 axes. Overhaul scope: Machine completely dismantled, cleaned all the components thoroughly and checked for complete functionality. All guideways new eingeschabt on Neumaschinengeometrie. Wear parts replaced defective components reparariert or replaced. Reassembly, compl. Functional testing and internal loss. Machine repainted. Machine in perfect, produktionsbereitem state. Accessories: - Vertical feed with pre-selectable active digital display, direct measuring system Heidenhain - Electric magnetic chuck with straight coarse / fine pole  ...

grinding length:650 mm grinding width:450 mm workpiece height:425 (ohne Magnetplatte) mm max. workpiece weight:600 kg weight of the machine ca.:3,8 t total power requirement:15 kW machine dimensions approx. WxHxD:3,0 x 2,4 x 2,3 m Used/reconditioned surface grinding machine, make GER, type RSA-650. Automatic infeed in all 3 axes. Machine geometrically overhauled, repainted (RAL6011, green), all functions tested, accuracy checked. OVERHAUL SCOPE: Machine completely disassembled, all components thoroughly cleaned and tested for complete functionality. Main spindle newly mounted, concentricity 3 µ. All guideways newly scraped in new machine geometry. Wear parts replaced, defective components repaired or replaced. Reassembly, complete functional test and internal acceptance. Machine repainted. Machine in perfect condition, ready for production. MEASURED GEOMETRIC ACCURACIES: Actual geometri ...

grinding length:850/1000 mm grinding width:375 mm workpiece height:375 mm Clamping area:1550x370 mm total power requirement:9 kW space requirements approx. LxWxH:4,80 x 2,25 x 2,40 m Total weight, approx.:4300 kg max. workpiece weight:350 kg Used Surface grinding machine, manufactured EFA type AMBASSADOR 4/2 VA IZ, Baujar 1975 Machine with automatic feed in all 3 axes. Machine cleaned and tested by qualified technician Functionality tested. Surface grinding machine in perfect condition, ready for production. Accessories: - Electric - magnetic - table size 400x200mm, with a straight pole - demagnetising devise - wheel dresser mounted laterally on the grinding wheel, manually operated - wet grinding - 1 piece grinding wheel flange - 1 set of machine set up devises - Technical documentation in German - With diaform - device For more information, see the Appendix. Payment: 100% before loadin ...

grinding length:450 mm grinding width:250 mm workpiece height:280 mm Table area:760 x 250 mm grinding spindle drive:2,5 kW grinding wheel dia. x width:250x 25 mm grinding spindle speed:1430/2900 U/min way of grinding spindle saddle, vertical:400 mm total power requirement:4,5 kW weight of the machine ca.:1,8 t dimensions of the machine ca.:1,8 x 1,4 x 2,0 m Machine equiped with magnetic plate - dresser

grinding length:450 mm grinding width:250 mm workpiece height:280 mm Table area:760 x 250 mm grinding spindle drive:2,5 kW grinding wheel dia. x width:250x 25 mm grinding spindle speed:1430/2900 U/min way of grinding spindle saddle, vertical:400 mm total power requirement:4,5 kW weight of the machine ca.:1,8 t dimensions of the machine ca.:1,8 x 1,4 x 2,0 m Machine equiped with magnetic plate - dresser

Elbow 45° AGRU 250 SDR 17

Stainless steel elbow, welding elbow -Size: 40 x 1.5 mm 90° -Price: complete -Number: 39 pieces -Weight: 7 kg

Spiral pipe hose elbow PAGUS DN200 angle: 90° inner diameter: 200 mm elbow length:820 / 420 mm Material: rubber used, tested ! Dimensions: 700 x 300 x 230 mm

Pipe elbow 90° JACOB NW150 Article number: 11153339 DN150 Wall thickness: 1 mm Material: stainless steel New ! Dimensions: 235 x 235 x 164 mm

Angle fitting, elbow socket, compression fitting, 15 pieces SERTO SO 41021-10 018.2000.100 Operating pressure: max. 125 bar Material: brass pipe outer diameter: Ø 10 mm width across flats: 14 / 17 mm with nut and clamping ring similar LANDEFELD KW 10 MS Other quantities on request ! New ! Dimensions ( single screw connection ): 42 x 42 x 18 mm Dimensions ( packaging ): 135 x 90 x 60 mm

ISO-K Pipe elbow, 90° Pipe elbow, Elbow 90°, 2 pieces PFEIFFER VACUUM 320RRB063-90 Nominal diameter: DN 63 ISO-K Material: Stainless steel 304 / 1.4301 New ! Dimensions ( single elbow ): 195 x 100 x 100 mm Dimensions ( packaging ): 195 x 190 x 100 mm

ISO-K elbow, 90° elbow, Elbow 90°, 2 pieces PFEIFFER VACUUM 320RRB063-90 nominal diameter: DN 63 ISO-K Material: stainless steel 304 / 1.4301 used, tested ! Dimensions ( single elbow ): 195 x 100 x 100 mm Dimensions ( packaging ): 195 x 180 x 100 mm

Pipe elbows, with welding ends PAGUS 90° NW150 bending: 90 ° Inner diameter: Ø 150 mm wall thickness: 4 mm Material: steel New ! Dimensions: 410 x 200 x 160 mm

Threaded fitting, malleable cast iron thread fitting, elbow fitting, pipe angle fitting, pipe angle, threaded fitting, malleable cast iron threaded fitting -Manufacturer: Sanha, malleable iron threaded fitting elbow fitting 89 pieces -Size: 90° 1 1/2 -Order No.:. 12979-1 Art. 97 -Price: complete -Total weight: 134 kg

Pipe bend 90° JACOB R=2D 90° NW120 article number: 11123349 inner diameter: Ø 119 mm radius: 240 mm DN120 wall thickness: 1 mm Material: stainless steel New ! Dimensions: 485 x 180 x 135 mm