elb amb used for sale

1 used and professionally dismantled cement conveyor screw type ELBA BZL 80/100 , built 1995, engine and gearbox New 2020, AA approx. 8.50 m, 1 spare piece 3.0 m, disassembled and cleaned Errors and intermediate sale reserved, sale from stock

Very good deep hole drilling machine TBT T10-500. with cooler Drilling area: Drilling diameter 2-10 mm Max. drilling depth 500 mm Drilling method ELB Infinitely variable speed up to 8000 rpm Tailstock with counter rotation Automatic filter for coolant system Magnetic chip conveyor Full enclosure of the machine.

Cold regenerating adsorption dryer make SPX HANKISON type HHL 200Ser. -No: 347434-1204-2200 Year 2004minute / Max. Ambient temperature: +2 / + 45 °minute / Max. Inlet temperature: +2 / + 50 °Flow rate (based on + 20 ° compressed airsuction temperature and 1 bar absolute): 200 m³ / h.Pressure dew point at operating overpressure: -40 °minute / Max. Operating pressure: 5.0 / 16 barCompressed air connection: R 1Setting value Pressure switch Tank Pressure min.:0,91 bar ON: 0.7 bar OFFAdsorbent: activated aluminaContainer capacity: 93 lFilling weight per pressure vessel: 70 kgDimensions approx. W x D x H: 1150 x 750 x 1980 mmWeight approx: 310 kgWith- Level 1 controlused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our ...

Tool grinding machine Walter UWS30 CY - original condition - Width: 120cm - Height: 140cm - Depth: 100cm - with electric stroke adjustment - Sub-machine, 8 grinding shots - Grinding wheel pulling device - Electrical documentation + equipment Good condition fully functional can be visited and tried out on site. Shipping abroad. Visit: Basically, I would like to point out to you that in order to avoid misunderstandings, the article can be viewed before purchase and tested under electricity. Please ask questions before purchasing to avoid any ambiguity. If you have any general questions or make an appointment for a visit, I can be reached at any time, using the telephone number below or above. Errors in the description and intermediate sale reserved. The VAT is shown separately on my invoices. Shipping with forwarding.

Part No.: EO2-XR-ULZW // S. No.: 1 045042 Equipment / Additional information Technical specifications: Spectral technology: Spectral range: 380-730 nm Physical measuring interval: 3.5 nm Optical resolution: 10 nm Spectral resolution: 380 nm… 730 nm with 10 nm interval Measurement frequency in scan mode: 200 measurements / sec. Reflection measurement: spectral reflection (dimensionless) Emission measurement: spectral radiance (Mw / nm / m2 / sr), luminance (cd / m2) Ambient light measurement: spectral irradiance (mW / nm / m2), luminance (lux) measuring head for diffuse light with cosine correction

Feinbau Scherer PM 1 F-2 - 3 speed levels on the right - 3 speed levels on the left - Weight: 180kg - Height: 120cm - Depth: 50cm - Width: 100cm Good condition fully functional can be visited and tried out on site. Shipping abroad. Visit: Basically, I would like to point out to you that in order to avoid misunderstandings, the article can be viewed before purchase and tested under electricity. Please ask questions before purchasing to avoid any ambiguity. If you have any general questions or make an appointment for a visit, I can be reached at any time, using the telephone number below or above. Errors in the description and intermediate sale reserved. The VAT is shown separately on my invoices. Shipping with forwarding.

Polishing machine steel - Continuous speed - Height: 130cm - Depth: 110cm - Width: 100cm - Weight: 500kg Good condition fully functional can be visited and tried out on site. Shipping abroad. Visit: Basically, I would like to point out to you that in order to avoid misunderstandings, the article can be viewed before purchase and tested under electricity. Please ask questions before purchasing to avoid any ambiguity. If you have any general questions or make an appointment for a visit, I can be reached at any time, using the telephone number below or above. Errors in the description and intermediate sale reserved. The VAT is shown separately on my invoices. Shipping with forwarding.

Die sinking machine Fabr. AEG-Elotherm type Elbomat 222 WMash. -No: 224.4009with generator EP 60 C 2145172 and filter F 11 VYear of construction 1980Adjustment X: 300 mmAdjustment Y: 200 mmReading accuracy: 0.01 mmTable load max .: 400 kgTable dimensions: 580 x 310 mmTank / processing room: 700 x 450 x 265 mmMax. Fluid level above workpiece carrier: 250 mmTank volume: 70 lWorking head angle: 200 mmHead support: 200 kpMax. Distance between working head and table: 480 mmDepth gauge: 50 mmDepth-of-cut accuracy: + - 0.02 mmExternal dimensions of the machine: 1250 x 1225 x 2150 mmWeight approx.: 1.3 tWith- mot. Coarse adjustment of the working head / W axis- Eloplus Generaotr type EP 60 C- Heidenhain positioning controller TNC 1213 R Orbicut midi tromes- Adapter slot- H 400 system- Filter F 11Vused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.P ...

Karl Hertel Bending Bench / Round Bending Machine Kombi - Width: 150cm - Depth: 90cm - Height: 120cm - Weight: 350kg Good condition fully functional can be visited and tried out on site. Shipping abroad. Visit: Basically, I would like to point out to you that in order to avoid misunderstandings, the article can be viewed before purchase and tested under electricity. Please ask questions before purchasing to avoid any ambiguity. If you have any general questions or make an appointment for a visit, I can be reached at any time, using the telephone number below or above. Errors in the description and intermediate sale reserved. The VAT is shown separately on my invoices. Shipping with forwarding.

harden machine 1x1x2m temperature max 1200C PLC Wärmebehandlungs Kammeröfen Wärmebehandlungs gienanth Schachtöfen Haubenöfen Härten Anlassen bei niedriger und hoher Temperatur Glühen Normalglühen Austenitisieren Spannungsfreiglühen Vorwärmen vor dem Schmieden Rollenherdöfen Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Foremost Nissei Sandretto Fette Mazak Mori seiki Haas Okuma Gildemeister Doosan Daewoo traub hwacheon index Wema zeulenroda mueller Erfurt t ...

ovenn 650 inner dimensions 1x1x2m t max 650 C PLC Auto door Schachtofen Haubenofen Rollenherdöfen Durchstoßöfen Härten Glühen Normalisieren Weichglühen Vergüten Anlassen Entspannen Durchschuböfen Hubbalkenöfen Hubherdöfen Trockenöfen Rollenherdöfen Drehherdöfen Kammeröfen Mehrkammeröfen Verfahrbare zirlguss Haubenöfen Herdwagenöfen Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Foremost Nissei Sandretto Fette Mazak Mori seiki Haas Okuma Gildemei ...

Wave soldering machine make ATF type 20-33Year 1995, make -No: 0352330795Fluxer (spray fluxer)Compressed air consumption approx. 80 l / min depending on the setting.process width: 330 mmFluxer (foam fluxer)Compressed air consumption approx. 60 l / min depending on the setting.Process width: 330 mmMax. Flux capacity: 4.0 lMax. Foam height: 12 mmpreheatingRadiator per machine: 8Power consumption: 4.0 / 7.9 kWTemperature range Ambient temperature: -300 ° CTemperature sensor: Type J Fe-CuNisolder potPump motor: 24 V DC 1.3 AMax. Soldering temperature: 30 ° CHeating elements: 9 x 500 WHeating time approx: 2.0 hoursTemperature sensor: Type J Fe-CuNiLot quantity: 220 kgconveyor beltMax. PCB size: 335 x 420 mmDrive motor: 24 V DC 1.5 ABelt speed: 0 - 2.5 m / min.adjustable transport angle: 5 - 9 °Max. Process height: 120 mmSpecification machineDimensions approx: 1600 x 1000 x 1360 mmExtractio ...

bogie furnace 1x1x2m Temperature max 1200C PLC Data monitoring good quality Kontinuierliche Öfen für die Wärmebehandlung von Nichteisenmetallbändern Anlage für Wärmebehandlung von Wagenfahrgestellgüsse Öfen für die Wärmebehandlung von Transformatorblech Warmrundlaufprüfanlagen Öfen für Feuerwiderstandsprüfungen Hubbalken- und Hubherdöfen Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Foremost Nissei Sandretto Fette Mazak Mori seiki Haas Okuma Gild ...

oven 550 industrial 2x2x6m temperature range 100 - 550C Wärmebehandlungsöfen Wärmeofen Wärmeprozessöfen Warmhalteofen Warmluftofen Herdwagenofen Rollenherdofen Kammerofen Drehtellerofen Wagenherdofen & Tunnelofen Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Foremost Nissei Sandretto Fette Mazak Mori seiki Haas Okuma Gildemeister Doosan Daewoo traub hwacheon index Wema zeulenroda mueller Erfurt tox presso technik dunkes galdabini hare ponar zeulenrdoda eitel  ...

harden furnace 1200 0.6x0.6x1.0m temperature 100 - 1200 Celsius possible various size Industrieöfen Neubauten Industrieöfen gebraucht Plasmanitrieranlagen Drehherdöfen Drehtrommelöfen Durchlauföfen Herdwagenöfen Induktionshärteanlagen Kammeröfen Ofenanlagen Schachtöfen Vakuumöfen Herdwagenofen Rollenherdofen Kammerofen Drehtellerofen Wagenherdofen & Tunnelofen Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Foremost Nissei Sandretto Fette Mazak Mori seiki Ha ...

SENFENG FLK 120 automatic mask making machine manufactured in 2020 in China, is used for the fully automatic production of masks consisting of three layers of fabric materials. The masks produced are used in the medical industry, as well as protecting us in everyday life by filtering harmful substances in the air, such as dust and bacteria. The machine producing surgical masks automatically cuts, folds and stitches the fabric used in their production. Ear bands with a diameter of 3 mm, as well as nose strips with a width of 2 to 3 mm are added to the masks. The mask making machine guarantees a high production output, producing 90 to 120 masks per minute with a production quality rate of up to 98-99%. The surgical mask making machine is equipped with a Delta PLC controller featuring a touch screen, making the work on the machine much easier. The total weight of the automatic mask ma ...

This SPR 320 machine is ideal for flattening and equalizing various meats, such as cutlets, döner kebab, whole muscle products and custom-made products. The space available in the production was taken into account by a two-stage arrangement of the strips. The meat is placed on top, then lowered between the strips to come out flattened on the same side at the end. This means that the installation space of the machine could be reduced by half for the same efficiency. The plant's production is around 1,500 cutlets/hour and can therefore also meet ambitious requirements. Characteristics of the machine: Type: SPR 320 Year of manufacture: 2012 Weight: 380 Kg. Power: 1,163 kW. Voltage: 400 V. Frequency: 50 Hz. Amperage: 3.687 A.

oven 1100 1.5x1.5x2m t max 1150 150kw auto door auto bogie PLC Haubenofen Schachtofen Sonderanlagen Härt en GlühenNormalisieren Weichglühen Isothermglühen Vergüten Anlassen Entspannen Hubschritt-Kettenförderofen Ringherdofen Kammerofen Durchstoßofen Drehherdofen buerstlein Rollenherdofen Gußplattenbandofen Reinigungsanlagen Schutzgaserzeuger Ofenanlagen zum Homogenisieren von Aluminium Kammerofen zum Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Fore ...

Siemens Advia Centaur XP Analysis System With Siemens Healthineers services and maintenance until the last minute 02/2022 Modern AE immunoassay technology Meet clinical requirements with acridinium ester (AE) technology, which ensures the necessary flexibility and sensitivity for new and innovative assays. Comprehensive diagnostic clarification of various clinical pictures thanks to a test menu with over 70 different assays. Simplified inventory management and lower costs by using the same ready-to-use reagents on all ADVIA Centaur analysis systems. Simplified operation, continuous operation All samples, reagents and consumables can be loaded and unloaded during operation. Easier training and operation thanks to an intuitive, icon-based user interface. Fewer operator intervention because daily maintenance is low and the system does not need to be cleaned monthly or booted  ...

BOVONE ELB 10/45 glass bevelling machine built in 2004 in Italy, is used in the process of grinding flat and inclined edges made of glass. Glass with a thickness between 3 and 30 mm is processed with the highest precision and accuracy using ten spindles. Exceptional stability during machining is ensured by a structure made of top-quality cast iron. The glass bevelling machine is maintained on an ongoing basis – in 2021, it underwent an extensive service during which components such as bearings on the spindles or cofferdam brushes were replaced. The glass edging machine is equipped with an infeed and outfeed conveyor with a load capacity of 800 kg. The machine weighs 4,200 kg. Technical specifications of the BOVONE ELB 10/45 glass straight line edging machine - number of spindles: 10 - minimum thickness of glass: 3 mm - maximum thickness of glass: 30 mm - minimum dimensions of ...

oven 1.5x1.5x1.5 650 Celsius Auto door Auto cooling PLC/ data monitoring Ausführung als Kammeröfen, Haubenöfen, Herdwagenöfen, Schachtöfen; Herdwagen-Schmiedeöfen Umluftöfen Kammerofenlinien Nitrieröfen Plasmanitrieröfen Vakuumprozesse Schmelzöfen Trocknen Tempern Laboröfen Ersatzteile Öfen Kammeröfen Herd wagenöfen Herdwagenöfen Glühen Härten Tempern Umformen Vorwärmen Schmieden Thermisches Reinigen Vakuumtechnik Pyrolyse Löten Öfen INDUSTRIEOFENBAU Kammeröfen Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Mane ...

oven 650 inner 1x1x1.2m (possible various size) t max 650 PLC Tiefofen zum Homogenisieren von Walzbarren Wärmezubehandelnde Barren werden auf einer Stirnseite stehend mittels Krananlage und Zangeneinrichtung in den Ofen eingesetzt. Die Erwärmung der Barren wird bei mehrreihigem Einsatz durch Hochkonvektion mit entsprechend angeordneten Düsen und Düsenkanälen gleichmäßig erwärmt. Nach Ablauf der Homogenisierungszeit wird die Barrentemperatur auf Walztemperatur abgesenkt und die Barren stehen für die einzelne Abnahme im Walz-Takt zur Verfügung. Die Öfen können direkt und indirekt Gas oder elektrisch beheizt ausgeführt werden. Herdwagenofen Rollenherdofen Kammerofen Drehtellerofen Wagenherdofen & Tunnelofen Haubenofen Schachtofen Sonderanlagen Ofenanlagen zum Glühen von Aluminium Die Bandbunde werden mit Ihrer Achse horizontal in den Ofen eingelegt. Die Aufnahme er ...

SWELD welding machine - Mains connection: 415 V (50/60 Hz) 3 Ph. - Transformer fuse: 30 A - Duty cycle: 375 A 40 % 300 A 60 % 230 A 100 % - Protection class: IP 23 S Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.

Oven 700 1.3x1.3x1.5m Auto door PLC top quality Giessereianlagen Giessereimaschine Giessereimaschinenbau Giessereitechnik Giessereizubehör Glasschmelzöfen H aubenöfen Herdwagenöfen Hochtemperaturöfen Induktionsanlagen Industrieöfen Industrieofenanlagen Industrieofenbau Kammeröfen Keramikbrennöfen Kippofen Kupolöfen Laboratorien Laboröfen Lötofen Maschinen Muffelöfen Nachverbrennungsanlagen Öfen Ofenanlagen Ofenbau Ofenbauzubehör Prozessanlagen Prozesssteuerungssysteme Pyr lyse Pyrolyseöfen Regelungstechnik Retortenka meröfen Retortenofen Rohrofen Salzbadöfen Schmelzofen Sinteröfen Thermoprozessanlage Thermoprozesstechnik Vakuumglühofen Vakuumkamme fen Veraschungsöfen Versuchsofen Vorwärmofen Wachsausschmelzverfahren Wannenofen Wärmebehandlung Wärmebehandlungsöfen Wärmebehandlungsverfahren Wärmerückgewinnungsanlagen Warmhalteofen Poreba Gurut ...

Mikron C Axis Machine Table - with Heidenhain control 430 - Siemens server motor - Table: 60 x 110 cm - 4th axis, diameter: 50 cm - Weight: 650 kg Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.

oven 10 - 1150 Celsius inner 1x1x2m plc auto door various size possible Härten Vergüten Härten von Kaltarbeitsstahl Härten von Warmarbeitsstahl Induktivhärten Flammhärten Anlassen / Glühen Bainitisieren Entspannen / Anlassen Anlassofen Aushärteö fen Chargentrockner Drucksinteröfen Durchlauföfen Kipp – Tiegelöfen Laboröfen siehe Lack – Einbrennöfen Lack – Trockenöfen Messing – Glühöfen Muffelöfen Magnesium –Schmelzöfen Ölversorgungsanlagen Ölbrenneranlagen Retortenöfen Teil-Vakuum Rollenherd - Durchlauföfen Rohrglühöfen Salzbadöfe n Schmiedeöfen Schachtöfen Stoßöfen Schüttelherd - Härteöfen Schutzgas Topfglühöfen Tiegelschmelzöfen Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce  ...

Aquatherm WLR 11 water chiller, cooling medium water, cooling capacity 1.1 kW based on an ambient air temperature of 27°C and a water inlet temperature of 15°C, coolant R12, electrics 220V/1 Ph/50Hz, power consumption 0.7 kW

Furnace 1200 temperature 10 - 1200 Celsius 2 heating zones 100kW auto door PLC Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Foremost Nissei Sandretto Fette Mazak Mori seiki Haas Okuma Gildemeister Doosan Daewoo traub hwacheon index Wema zeulenroda mueller Erfurt tox presso technik dunkes galdabini hare ponar zeulenrdoda eitel Ziel des Spannungsarmglühens ist die Reduzierung von Eigenspannungen im Material. Solche Spannungen entstehen zum Beispiel durch Gefügeum ...

Available for sale 2 x NEVER USED Leroy Somer Automatic Voltage Regulator R713. The 3F R713 or R723 modules are used in connection with a R200 series regulator for equalizing the voltage of an alternator with that of the network before coupling, when the installation operates automatically or when manual equalization of these voltages is not possible. This prevents excessive current caused by coupling a network to the machine when both are not at the same voltage. This difference in voltage is usually due to fluctuations in the network voltage because the alternator is regulated at a constant voltage except for cases of voltage droop). On some networks these fluctuations can reach ± 10%. Equipment never used and in good working conditions. Consumption: < 2VA Response time: < 300 ms Dissipated power: < 1W Temperature Shift: 1% of Un for delta T ambient variing from -20° to 2 ...

Immersion recooling system, ERK 58-V, Hoffmann, new Special price If you have a VAT number, we will gladly issue you an invoice without VAT. As good as new in original packaging! The part was purchased from a spare parts warehouse of a company, was there for a very long time as a spare part in stock but never in operation, is completely as new and in the original packaging. Cooling capacity: 5,8KW Connected load 3,4 KW Max. Ambient temperature 38°C Max. operating pressure 17bar Refrigerant R 134A/3 Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

Furnace (heat treatment machine) 650 T max 650 Celsius inner dimensions 1.5x1.5x2m Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Foremost Nissei Sandretto Fette Mazak Mori seiki Haas Okuma Gildemeister Doosan Daewoo traub hwacheon index Wema zeulenroda mueller Erfurt tox presso technik dunkes galdabini hare ponar zeulenrdoda eitel

The PRIMA POWER PLATINO 1530 laser was produced in 2012 by the Italian company Prima Power. Technical parameters: – machine time worked: 24800 hours – power: 2500.0 W – CNC control: Primach 20L – X travel: 3000.0 mm – Y travel: 1500.0 mm – working area: 3000 x 1500 mm – maximum sheet length: 3000.0 mm – maximum sheet width: 1500.0 mm – maximum sheet thickness: 15.0 mm – maximum load on the table: 250.0 kg – machine length x width x height: 12000.0 mm × 6000.0 mm × 3000.0 mm – machine weight: 12000.0 kg Rofin Sinar DC 025 CO2 laser specification – type: CO₂ – laser: Rofin Sinar DC 025 – power: 2,500 Watt – power stability: + -2% FS – wavelength: 10.6 µm – gas type: He 67.7%; CO2 4.1%; N2 28.2% – beam propagation factor M2: 250 microseconds, 70 used resolutions – positioning accuracy: + -150 radians – operating condi ...

Version Type RKV 4.3 K DK Refrigerant R 407 c Refrigerant charge kg 3.2 Cooling capacity at tw +20°C kW 12,2 Operating pressure max. bar 28 Temperature range Water flow min. °C + 10 Water flow max. °C + 25 Ambient temperature min. °C + 10 Ambient temperature max. °C + 50 Compressor at tc/to=53/15°CZR 61 Number of pcs. 1 Fully hermetic design Nominal power kW 6 Rated current A 9 Rated current max. A 11 Evaporator Plate arm exchanger version Material copper Condenser Air-cooled, axial version Material Cu tube / aluminium fins Fan FB050-VDK.4I.V4S Number of pcs. 1 Axial fan version with blade Nominal power kW 0,8 Nominal current A 1.6 Air flow m³/h 5000 Rated speed n 1290 Electronic version Digital temperature display Switching capacity AC / A 2 Dimensions Width approx. mm 750 Depth approx. mm 1050 Height approx. mm 1100 Weigh ...

Height tips 300 mm Distance between tips 4,000 mm Spindle speed (16) 15-1,500 rpm Bar pass 105 mm Engine power 15 HP displayed with ELBO system

max. wheel diameter: 400 mm gear width: 200 mm max. module: 10 min. module: 1 profile depth: 25 mm x-axis: 630 mm y-axis: 400 mm z-axis: 190 mm U-axis: 80 mm a- axis: 360 ° b-axis: +/- 30 ° max.helical angle: 30 ° grinding wheel diameter: 250 - 350 mm spindle speeds (infinitely variable): 1500 - 2800 U/min grinding slide feeds: 6000 mm/min center distance betw. workpiece-tool min/max.: pitch max.: 9000 mm pitch min.: 10 mm electrics - voltage/frequency: 380 / 50 V/Hz total power requirement: 38 kW weight of the machine ca.: 9,5 t dimensions of the machine ca.: 4,2 x 2,6 x 2,8 m horizontal Profil Gear Grinding Machine for Spur and Helical External Gears. Machine can be used with Abrasive Electrocorundum Wheels or with CBN or Elbor Wheels. Equipped with: - CNC Control FANUC 0i-MF -- for 6 Controlled Axis (4 simultaneously) - Gear Measuring System - Chip and Sludge Removal System - Pape ...

White SC/KWT 1000 - Test chamber volume 1000l - Test chamber dimensions height with hood: 1190mm - without hood: 740mm - Width: 1560mm - Depth: 570mm Outer dimensions: height: 1370mm, width: 920mm, depth: 800mm Brine tank: 180l Temperature range: - Salt spray test: 5K above ambient temperature up to +50°C - Condensation water test: 5K above ambient temperature up to +45°C Humidity range at SC/KWT : Room humidity/saturation Air flow rate with salt spray test 2m³/h Air flow rate for standard climates: 7m³/h Compressed air min.4bar/ max 10bar Connection 1/4 inch Connection 208-240V 2.6kV 220kg Standard Type series SC Options Type Series SC and SC/KWT Ventilation device for DIN 50 014, paragraph 5 Room tem pe - ratur (standard on SC/KWT) Desalination plant Compressed air unit Precipitation collectors Precipitation recording and display Measurin ...

core drilling diameter max.: 25 mm bore depth: 1000 mm swing diameter: mm total power requirement: 25 kW weight of the machine ca.: 12,5 t dimensions of the machine ca.: m T B T (Germany) CNC-Controlled Horizontal Deep Hole Drilling Centre Model BWP 250 Year 1996, but reconditioned mechanically and electrically in 2006 ______________________________________________________________________ _____________ Working range: X Axis, machine column cross 2,000 mm Z Axis, drilling slide horizontal 1,200 mm Drilling depth 1.000 mm Y Axis, drilling slide vertical 1,100 mm Table clamping area 1,200 x 2,000 mm Drilling capacity in solid material, approx. 4 - 25 mm Tool holder taper HSK 50 Spindle speeds 1.260 - 15,000 rpm Feed rates / quickfeed, XYZ, infinitely variable 100 - 10,000/15.000 mm/min. Force rate of feed  ...

pressure: 55 t throat: 250 mm stroke: 10-90 mm table-size: 640 x 495 mm no. of strokes: 120 Hub/min ram adjustment: 55 mm ram surface: 290 x 210 mm ram hole: 40 H7 mm hole in the table: 220 x 190 mm T-slots: 22 clamping plate: 620 x 485 x 65 mm total power requirement: 4,5 kW weight of the machine ca.: 3,4 t dimensions of the machine ca.: 1,5 x 1,2 x 2,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Process air chiller / chiller / chiller - air cooled, Type: Galaxy TECH GLT330HE_Special M.T.A. S.p.A. The Galaxy GLT 330 HE-special are compact chillers suitable for outdoor installation (from -20°C to +40°C) and for cold water temperatures down to -10°C. Equipped with: - shell and tube evaporators, - scroll compressors, - control cabinet, - shut-off valves for compressors, - Equipment for low ambient temperatures down to -20°C, - P3 pump, - 510 litres buffer tank, - compressor housing, -Vibration damper - Vitaulic couplings. Cooling capacity (kW): 900 Cold water temp. Exit/ Entry (°C): 7 / 12 Volume flow (m³/h): 171 Available pump pressure bar: 2,22 Ambient temperature (°C): 32 Refrigeration circuit: Refrigerant R 410A Refrigeration circuits (number): 4 Compressors (number): 12 Performance levels (%):0-8-17-25-33-42-50-58-67-75-83-92-100  ...

pressure: 25 t throat: 200 mm stroke: 4 - 80 mm table surface area: 520 x 400 mm no. of strokes: 160 Hub/min ram surface: 160 x 160 mm ram adjustment: 40 mm ram hole: 32 H7 mm hole in the table: 200 x 150 mm clamping plate: 500 x 380 x 60 mm total power requirement: 2,7 kW weight of the machine ca.: 1,9 t dimensions of the machine ca.: 1,3 x 1,0 x 1,85 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 55 t throat: 250 mm stroke: 10-90 mm table-size: 640 x 495 mm no. of strokes: 120 Hub/min ram adjustment: 55 mm ram surface: 290 x 210 mm ram hole: 40 H7 mm hole in the table: 220 x 190 mm T-slots: 22 clamping plate: 620 x 485 x 65 mm total power requirement: 4,5 kW weight of the machine ca.: 3,4 t dimensions of the machine ca.: 1,5 x 1,2 x 2,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Process air chiller / chiller / chiller - air cooled, Type: Galaxy TECH GLT330HE_Special M.T.A. S.p.A. The Galaxy GLT 330 HE-special are compact chillers suitable for outdoor installation (from -20°C to +40°C) and for cold water temperatures down to -10°C. Equipped with: - shell and tube evaporators, - scroll compressors, - control cabinet, - shut-off valves for compressors, - Equipment for low ambient temperatures down to -20°C, - P3 pump, - 510 litres buffer tank, - compressor housing, -Vibration damper - Vitaulic couplings. Cooling capacity (kW): 900 Cold water temp. Exit/ Entry (°C): 7 / 12 Volume flow (m³/h): 171 Available pump pressure bar: 2,22 Ambient temperature (°C): 32 Refrigeration circuit: Refrigerant R 410A Refrigeration circuits (number): 4 Compressors (number): 12 Performance levels (%):0-8-17-25-33-42-50-58-67-75-83-92-100  ...

core drilling diameter max.: 50 mm bore depth: 2000 mm swing diameter: mm drilling capacity diameter max.: 110 mm total power requirement: 30 kW weight of the machine ca.: 10 t Drilling Ø, approx. 2 - 50 mm Boring Ø, approx. 100 mm Drilling depth, max. (see stroke / mounting length) 1,600 - 2,000 mm Stroke of drilling slide, approx. 4,000 mm Distance between the two spindle heads 5,000 mm Height of centres above guideways 350 / 450 mm Drilling feed of drilling slide, infinitely variable 20 - 200 mm/min Quick feed of drilling slide 2,500 mm/min Spindle speeds via belt disks 260 - 650 / 650 - 1,625 rpm Workspindle drive 24 kW Drive of coolant pumps 1 x 7.5/15 kW and 1 x 15/28 kW Total electrical load, approx. 60 kW - 380 V - 50 Hz Total length of machine / guideways 7,500 / 5,000 mm Weight, approx. 10,000 kg Accessories / Special Features Machine consists of the following elements:  ...

x-travel: 22.000 mm y-travel: 1.500 mm z-travel: 3.000 mm Control: SIEMENS 840 D milling head -swivable: 0,001/0,001 Grad milling head: Universalfräskopf 45° Internal cooling system: 20 bar Chip coveyor: ja Tools changer: 30 pos. coolant: 1.100 l Tool taper: DIN 69871A ISO 50 total power requirement: 45 kW weight of the machine ca.: 68 t The round table shown in the pictures as well as the plate field are not sold with ! urning Speeds 6.000 r.p.m. AutoIndex Head 45 º Head 360.000 Pos. Elbow 360.000 Pos. Main Motor Power 37 Kw. Nº Change Range 2 Ranges Automatic Tool Charger INCLUDED Tools at ATC 30 Coolant Through Tool 20 Bar INCLUDED Soluble Oil Tank with filter paper INCLUDED Head Coolant System + CF Box INCLUDED Longitudinal Chip Conveyor INCLUDED Operator?s Platformd with 2000 mm Vertical movement. INCLUDED Ready for Rotor Translating Table (Regulator + Wires) /IN ...

RC GROUP GLIDER FREE 630 V2 Y5 Brand:RC GROUP Type:GLIDER FREE 630 V2 Y5 Stock number:M23-4609 Cooling capacity:500 kW Application:Cooling Number of fans:12 Refrigerant:R134a Refrigerant Content:2x 107,5 kg Voltage:400 Volts Dimensions:7484 x 2310 x 2605 mm Weight:7,001 kg Year:2013 Number in stock:2 piece(s) Price:Quotation Request Description: Nice air-cooled RC Group water chiller with 2 screw compressors distributed over 2 cooling circuits. Mentioned capacity at a water temperature of +12/7°C and an ambient temperature of +35°C (Q= 602 kW at Tw= +15/10°C and Tamb= +40°C). Free-Cooling: Q= 536 kW at Tw= +15°C and Tamb= 0°C. Visit our website: used-refrigeration

pressure: 40 t throat: 225 mm stroke: 8 - 84 mm table surface area: 580 x 450 mm ram adjustment: 55 mm no. of strokes: 130 Hub/min ram surface: 185 x 180 mm ram hole: 40 mm hole in the table: 210 x 450 mm clamping plate: 570 x 450 mm total power requirement: 3,5 kW weight of the machine ca.: 2,7 t dimensions of the machine ca.: 1,4 x 1,1 x 2,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 25 t throat: 200 mm stroke: 4 - 80 mm table-size: 520 x 400 mm no. of strokes: 160 Hub/min work capacity during endurance run: 1370 Nm force: 2740 Einzelhub adjustment of stroke: 4 - 80 mm ram adjustment: 40 mm ram surface: 160 x 160 mm hole in the table: 200 x 150 mm clamping plate: 500 x 380 x 60 mm hole in the table: 80 mm weight of the machine ca.: 1,9 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40 t throat: 225 mm stroke: 8-84 mm Table dimensions: 580 x 450 mm ram adjustment: 55 mm no. of strokes: 130 Hub/min ram surface: 185 x 180 mm ram hole: 40 H7 mm hole in the table: 210 x 170 mm T-slots: 22 clamping plate: 570 x 450 x 65 mm total power requirement: 3,5 kW weight of the machine ca.: 2,7 t dimensions of the machine ca.: 1,4 x 1,1 x 2,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 25 t throat: 200 mm stroke: 4 - 80 mm table surface area: 520 x 400 mm no. of strokes: 160 Hub/min force: Dauerlauf 1765 J dayligth: 302 max mm dayligth: 100 min mm adjustment of stroke: 8-84 mm ram adjustment: 55 mm ram surface: 185 x 180 mm ram hole: 40 H7 mm force: 3530 J hole in the table: 210 x 170 mm width of T-slots: 22 mm connected load: 3,5 kW rated current: 9 frequency: 50 Hz voltage: 380 V weight of the machine ca.: 2700 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

PROFROID FCTE 90 20 MDB AC V2 Brand:PROFROID Type:FCTE 90 20 MDB AC V2 Stock number:M23-3321 Cooling capacity:1,838 kW Application:Cooling Number of fans:20 Refrigerant:Water / Glycol Refrigerant Content:458 kg Voltage:400 Volts Motor power:20x 1,85 kW Dimensions:11470 x 2200 x 2500 mm Weight:4,100 kg Year:2x 2016 / 1x 2018 Number in stock:3 piece(s) Price: Quotation request Description: Very young and nice V-Block dry coolers with 20 fans. Two coolers are from 2016 and one cooler from 2018. The cooler from 2018 is equipped with water spraying system (adiabatic cooling), so it has more power (± 2400 kW). Mentioned capacity at a water temperature of +45/40°C and an ambient temperature of +30°C and 34% Glycol. Visit our website: used-refrigeration