We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
124,110 used machines on RESALE, but how to find them? Machine Search
used
Manufacturer: Purete, Type: PRT-U6113, Year: neu, Work piece width min-max mm: 1.320, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 2 - 80, Number of lamps: 6, kW power 1 lamp: 17, kW power all lamps: 102, Lampenlänge mm: 1.478, Reflektor von oben abnehmbar: zur Bedienseite, Gesamtlänge UV Modul mm: 1.850, Lamps inclined installation: no, Lamps straight installation: yes, Lamps from below: no, Strahlereinheit UVM: yes, Adjustable: yes, Elektronische Leistungregelung: yes, Automatische Werkstückerkennung : yes, Automatischer Hochlauf der Lampe bei Einlauf Werkstück: yes, Position of lamps: gerade, Power per lamp watt UV: 120, Abluftmenge cbm/h: 6 x 1.200, Leistung Abluftventilator kw: 0,5, Conveyor lenght mm: 3.650, Tragstangendurchmesser mm: 25, od distance mm: 38, Conveyor lenght mm: 3.650, Chain pitch mm: 38, Feeding speed m/min: 5 - 25, Conveyor: Stange, ...
used
Manufacturer: Purete, Type: PRT-R2113c, Year: neu, Control: Siemens, Program: HMI, Work piece width min-max mm: 1.320, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 3 - 80, Durchlassbreite min-max mm: 1.320, Operating side: rechts, Working height: 880, Lackauftragseinheiten: 2, Vorschub Transport m/min min - max: 5 - 25, kW - Leistung Transport: 1,5, Auftragswalzengeschwindigkeit m/min min-max: 5 - 25, Gummierte Auftragswalze(n): 2, Auftragseinheit 1 shore härte: 20 - 25, Gummierung mm: 13, Dosierwalze 1 m/min min-max: 5 - 25, Auftragseinheit 2 shore härte: 20 - 25, Gummierung mm: 13, kW - Leistung Auftragswalze: 1,5, Durchmesser Auftragswalze mm: 240, Simple rubber coating: yes, Dosierwalze verchromt: yes, Dosierwalzen Gleich und : yes, kW - Leistung Dosierwalze: 0,75, Durchmesser Dosierwalze mm: 180, Steuerung Nicht-Ex : yes, Widht of roller coater: 1.450, ...
used
Hersteller : Homag Floppy, Spare part from machine: Einschub Floppy, Type: HD SCSI 10TE CPU 30, Serial number: 2-083-03-0045,
used
Manufacturer: Cefla, Type: VV2000M1, Year: 2006, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 340, Min.-max. workpiece height in mm: 3 - 80, Working widht max mm: 1300, Number of lamps: 1, kW power 1 lamp: 15, kW power all lamps: 19,9, Lampen gerade eingebaut: 1, Adjustable: stufenlos, Heating battery: Kühlung hinter der UV Lampe, Year :2006
used
Manufacturer: Homag KAL 310/9/A20/S2, Type: 310/9/A20/S2, Year: 2005, Control: Powercontrol, Barcode: möglich, Min-max edge material mm: 0,3-3,0, Work piece width min-max mm: 75, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 10-60, Min-max feed m/min: 15-30, Axis control: yes, Infeed table: Winkelanschlag, Einlauflineal gesteuert: yes, Premilling: yes, Fine milling: yes, Application of separation agent: yes, IR zone: yes, Power per lamp: 400, Coil magazine: yes, Strip magazin: no, Mitre stations: yes, Radius milling axis adjustment: yes, 2 motors: FK 13, Magazin : 2 X 6 fach, Radius scraper: yes, Type of scraper: servo gesteuert, Scraper with axis adjustment: yes, Spraying system 2: yes, Bonding part EVA: PU Verleimteil, Buffing unit: yes, Barcode: möglich, Workpiece support: yes, Hover cussion table: yes, Return type: TFU 140/L/20/08/105 Bauyeshr 2018, FREE ...
used
Manufacturer: IMA Bohrgetriebe mit einzel abrufbaren Spindeln, Stück Bohrgetriebe : 1, Number of drilling spindles: 7, Grid 32 mm: yes, Befestigungsschrauben: yes, FREE TEXT: 4 horizontale Spindeln/kw Leistung Motor 2,2 kw,
used
Manufacturer: Lackheizgeräte, FREETEXT1: Temperaturbereich 10-60 Grad, FREETEXT2: Gebindegrösse 30 Liter Behälter, FREETEXT3: Thermostat Einstellung , FREETEXT4: Heizmedium Warmwasser,
used
Manufacturer: Siemens , Type: S 5 183 U, Model: 6 ES 955-3LC14, FREE TEXT: inkl. 8 Einsteckkarten,
used
Manufacturer: Giardina 4 Zonen Trockner, Year: 2007, Control: SPS TX 37, Work piece width min-max mm: 100-1320, Min.-max. workpiece length in mm: 300-3500, Min.-max. workpiece height in mm: 6-70, Working widht max mm: 1320, Number of pallets: 92, Palettenausmass LxBxH mm: 3665 X 1400 X 90, Lichte weite Paletten: 115, Tragfähigkeit Palette kg: 180, Palettenausmass LxBxH mm: 3665 X 1400 X 90, Trockenzonen: 4, Abluftzone 1 Abluftmenge m/h³: 6000, Heizregister 1 kcal/h³: 30000, Trockenzone 2 Abluftmenge m/h³: 4000, Heizregister 2 kcal/h³ : 57000, Trockenzone 3 Abluftmenge 3 m/h³: 4000, Heizregister 3 kcal/h³ : 57000, Kühlzone 4 Abluftmenge 3 m/h³: 8000, Heizregister 4 kcal/h³ : Möglich 57000, Feeding speed m/min: 3-5, Conveyor/Conveyor belt: Stange, Heizmedium Warwasser: 3 X Viessman 60 kw Gastherme, Max.Temperatur Grad: 50, Damper register - items: ...
used
Manufacturer: Hymmen UV Trockner, Type: UVK, Year: 2004, Work piece width min-max mm: 1300, Number of lamps: 3, kW power 1 lamp: ca.10, Lampen gerade eingebaut: yes, Adjustable: yes, Power per lamp watt UV: 80, Conveyor lenght mm: 3450, Outer belt width mm: 1800, Working hight approx mm: 60, Feeding speed m/min: 5-25, Conveyor: Band, Drive power kW: 1,5, Year :2004
used
Manufacturer: Cefla, Type: TLF/B1-TTE4500/RE, Year: 1999, Work piece width min-max mm: 10-1350, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 100, Number of lamps: 2, kW power 1 lamp: ca. 10, Reflektor von oben abnehmbar: yes, Lamps inclined installation: yes, Lamps from below: ca. 120, Strahlereinheit UVM: 1350, Adjustable: 120, Elektronische Leistungregelung: ca.4000, Automatischer Hochlauf der Lampe bei Einlauf Werkstück: 2500, Power per lamp watt UV: 5-25, Leistung Abluftventilator kw: ca. 0,75, Strahlereinheit UVM: 1350, Conveyor lenght mm: 80, Outer belt width mm: 5-25, Max. air temperature: 20, Year :1999
used
Manufacturer: Superfici UV Trockner, Work piece width min-max mm: 10-1300, Min.-max. workpiece height in mm: 10-60, Number of lamps: 3+1, kW power all lamps: ca.50, Lampen gerade eingebaut: yes, Adjustable: yes, Position of lamps: gerade, Power per lamp watt UV: 80, Conveyor lenght mm: ohne Transport,
used
Manufacturer: Rollenbahn, Year: ca.1990, Driven: no, Length-width mm: 2500/und Teillängen, Working widht mm: 500, Width total mm: 550, Total hight mm: ca.290, Adjustable: no, FREE TEXT: vorhanden ca 300-400 Meter/Preise ist für einen Laufmeter, Year :ca.1990
used
Manufacturer: Cefla, Type: TLF/BB3-TTE4500/RE, Year: 1999, Work piece width min-max mm: 10-1350, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 100, Number of lamps: 4, Reflektor von oben abnehmbar: yes, Lamps inclined installation: yes, Automatische Werkstückerkennung : 120, Automatischer Hochlauf der Lampe bei Einlauf Werkstück: 2500, Position of lamps: 980, Power per lamp watt UV: 5-25, Leistung Abluftventilator kw: ca. 0,75, Conveyor lenght mm: 80, Max. air temperature: 57,1, Year :1999
used
Manufacturer: Homag, Type: KAL 310, Year: 2004, Control: NC 21, Software: Homag, Min-max edge material mm: 0,5-3, Min.-max. workpiece length in mm: 150-3000, Min.-max. workpiece height in mm: 10-55, Min-max feed m/min: 24, Axis control: yes, Premilling: yes, Fine milling: yes, Application of separation agent: yes, IR zone: yes, Power per lamp: 400 Watt, Coil magazine: einfach, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Bevel milling: yes, Radius milling axis adjustment: lyes, Corner tracing type: FK 11, 2 motors: 2, Radius scraper: yes , Scraper with axis adjustment: yes, Flat scraper: yes, Spraying system 2: yes, Cleaning nozzles: yes, Bonding part EVA: yes, Pre-smelting Kg/Hr: yes, Buffing unit: yes, Top pressure belt/roller: Band, Separation agent setup: yes, Workpiece support: yes, Machine lenght mm: ca.9,5, Noise enclosure: yes, Return type: Bargsted ...
used
Manufacturer: Purete, Type: PRT-U3113e, Year: neu, Work piece width min-max mm: 1.320, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 2 - 80, kW power 1 lamp: 17, kW power all lamps: 55, Lampenlänge mm: 1.478, Reflektor von oben abnehmbar: zur Bedienseite, Gesamtlänge UV Modul mm: 1.850, Lamps inclined installation: no, Lamps straight installation: yes, Lamps from below: no, Strahlereinheit UVM: yes, Adjustable: yes, Elektronische Leistungregelung: yes, Automatische Werkstückerkennung : yes, Automatischer Hochlauf der Lampe bei Einlauf Werkstück: yes, Power per lamp watt UV: 120, Abluftmenge cbm/h: 3 x 1.200, Leistung Abluftventilator kw: 0,5, Conveyor lenght mm: 2.300, Tragstangendurchmesser mm: 25, od distance mm: 38, Conveyor lenght mm: 2.300, Feeding speed m/min: 5 - 25, Conveyor: Stange, Exhaust air diameter mm: 200, Required space L x W x H mm: 2.300 x ...
used
Manufacturer: Purete, Type: PRT-R2113a, Year: neu, Control: Siemens, Program: HMI, Work piece width min-max mm: 1.320, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 3 - 80, Durchlassbreite min-max mm: 1.320, Operating side: rechts, Working height: 880, Lackauftragseinheiten: 2, Vorschub Transport m/min min - max: 5 - 25, kW - Leistung Transport: 1,5, Auftragswalzengeschwindigkeit m/min min-max: 5 - 25, Gummierte Auftragswalze(n): 2, Auftragseinheit 1 shore härte: EPDM 40, Gummierung mm: 13, Dosierwalze 1 m/min min-max: 5 - 25, Auftragseinheit 2 shore härte: EPDM 40, Gummierung mm: 13, Dosierwalze 2: 5 - 25, kW - Leistung Auftragswalze: 1,5, Durchmesser Auftragswalze mm: 245, Simple rubber coating: yes, Dosierwalze verchromt: yes, Dosierwalzen Gleich und : yes, kW - Leistung Dosierwalze: 0,75, Durchmesser Dosierwalze mm: 180, Steuerung Nicht-Ex : yes, Widht of ...
used
Manufacturer: Purete, Type: PRT-F1113, Year: neu, Control: Siemens, Program: HMI, Working width min-max mm: 1.320, Arbeitslänge min- max mm: 300, Arbeitshöhe min- max mm: 3 - 80, Durchlassbreite min-max mm: 1.320, Operating side: rechts, Working height: 880, Spachteleinheiten: 1, Vorschub Transport m/min min - max: 5 - 25, kW - Leistung Transport: 1,5, Auftragswalzengeschwindigkeit m/min min-max: 5 - 25, Gummierung mm: 13, Gummierung mm: 13, Shore: EPDM 40, Durchmesser Auftragswalze mm: 245, Simple rubber coating: yes, Dosierwalze verchromt: yes, Dosierwalzen Gleich und : yes, Glättewalzengeschwindigkeit: 5 - 25, Dosierwalzenschwindigkeit m/min min-max: 5 - 25, kW - Leistung Dosierwalze: 0,75, Durchmesser Dosierwalze mm: 180, Glättewalze verchromt: yes, Glättewalze m/min min-max: 5 - 25, kW-Leistung Glättewalze: 1,5, Durchmesser Glättewalze mm: 245, Chromium-plated levelling rolle ...
used
Manufacturer: Gabelsatpler Zinken Neu, FREETEXT1: Länge 1300 mm, FREETEXT2: breite 120 mm, FREETEXT3: 520 mm Höhe <CRLF>Einschub,
used
Manufacturer: IMA PU Kantenbearbeitung, Type: Combima, Year: 2003, Control: ima, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 85, Min.-max. workpiece length in mm: 150-3500, Min.-max. workpiece height in mm: 10-55, Min-max feed m/min: 6-30, Einlauflineal gesteuert: yes, Premilling: 2 X 6,6, IR zone: 2 , Power per lamp: 2 X1,5, Coil magazine: 32, Mitre stations: yes, Bevel milling: yes, Radius milling axis adjustment: yes, 2 motors: yes, Radius scraper: yes, Flat scraper: yes, Rolling chain: yes, Spraying system 2: yes, Pre-smelting Kg/Hr: yes, Buffing unit: yes, Separation agent setup: yes, Year :2003
used
Manufacturer: Fraxinus - Desco , Year: 2008, Superordinate control: yes, Cycle performance units/min: 5, Work piece width min-max mm: 155-1070, Min.-max. workpiece length in mm: 482-3000, Min.-max. workpiece height in mm: 18-250, Vorschub der Montage m/min: regelbar, Roboterbeschickung für Pappe: yes, Stacking locations: 3, Ausrichtlineal Montagelinie: yes, Length of wrapping belt mm: 25000, Roboteraufstapelanlage: yes, Stacking locations: 3, Carton at pallet: yes, Stacking patterns possible: yes, Discharge station: 1, Einschleussstation: yes, Packing belts: 1, Automatic carton sealer: yes, Folieneischlagstation : yes, Folienbreite max mm: 1500, Foleinschrumpfanlage: yes, Stacking robot: yes, Stacking locations: 2, Pallet buffer: yes, Automatic pallet wrapper: no, Pallet buffer: yes, Feeding speed adjustable: yes, Feed out conveyor for pallets: yes, Sice - euro-pallet: yes, Belt width m ...
used
Manufacturer: Cefla, Year: 2003, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 3 - 80, Number of lamps: 1, Lampen Schräg eingebaut: 1, Working hight approx mm: ca 950 , Feeding speed m/min: ca 5 - 25, Rod transportation: yes, Year :2003
used
Manufacturer: Cefla, Type: UV Trockner, Year: 2003, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 350, Number of lamps: 2, Lampen Schräg eingebaut: 2, Conveyor lenght mm: ca 3000, Working hight approx mm: ca 950, Feeding speed m/min: ca 5 - 25, Rod transportation: yes, Year :2003
used
Manufacturer: Hackemack, Type: KTR 2040, Year: 1995, Work piece width min-max mm: 1350, Number of lamps: 3, Lampen gerade eingebaut: 3, Power per lamp watt UV: 80, Electrical power consumption kW: ca 47, Year :1995
used
Manufacturer: unbekannt, Type: Entstaubung, Year: ca.1990, Control: yes, Compressed air cleaning: doppelseitig, Number of units: 2, kW Leistung Motoren: ca.5, Units mounted upright: yes, Working width mm: 1300, Through running hight mm: 120, Roll transport: yes, Feeding speed continous adjustable: yes, Feeding speed min-max m/min: 5-20, kW-Vorschub: 0,5, Operating side: rechts, Ionising: eingebaut, Year :ca.1990
used
Manufacturer: Brandt, Type: KD 85, Year: 1998, Control: Homatic NC 21, Min-max edge material mm: 0,4-20, Work piece width min-max mm: 70, Min.-max. workpiece height in mm: 8-55, Min-max feed m/min: 7+25, Einlauflineal gesteuert: yes programm, Premilling: yes, Application of separation agent: yes, IR zone: yes, Power per lamp: 400 Watt, Coil magazine: yes, Strip magazin: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Radius milling axis adjustment: yes, 4 motors: yes, Grooves, slewable-controlled: yes, Radius scraper: yes, 4 motors: yes, Bonding part EVA: yes, Pre-smelting Kg/Hr: 8 Kilo, Number of sanding units: 3, Edge sanding: 1, Profile sanding top bottom: 2, Buffing unit: yes, Top pressure belt/roller: Band, Separation agent setup: yes, Compressed air bar: 6, Machine lenght mm: 10900, Noise enclosure: yes, FREE TEXT: Schiebeanschlag Einführung Rechtwinkliger Teile/Dr ...
used
Manufacturer: Kragarmregal, Type: Profillagerregal, Regalart: Einseitig, Regallänge mm: 5000, Anzahl Ständer: 6, Lagerebenen: 4, 1stupright frame pieces Qty.: 6, 1stheight mm depth mm: 2500, 1.Transverse beam length mm: 1 X 900,
used
Manufacturer: Kragarmregal, Type: Profillagerregal, Regalart: Einseitig, Regallänge mm: 5000, Anzahl Ständer: 6, Lagerebenen: 4, 1stupright frame pieces Qty.: 6, 1stheight mm depth mm: 2500, 1.Transverse beam length mm: 18 X 900,
used
Manufacturer: Helotec, Type: Plattenlager, Year: 2006, Control: Ferrocontrol, Online connection to following machines: möglich, Chaotische Lager: yes, Lagerabmessung Meter: ca.10 X 38, Plattenstärken min-max mm: 8-22, Beschichtet Platten: yes, Halbformatplatten-Format: yes, Einlagerplätze: 1, Auslagerplätze: 1, Min-max stack dimensions length: 2800 X 2100, Verstellbare Saugtraverse : no, Transport roller conveyor: yes, Geschwindikeitfahrträger Brücke m/min: 80/60, Drehvorrichtung Hubsytem : yes, Hight of stacks max mm: 1440, Weight measurement: 200, Number of sucking lines: 2, Feeding speed continous adjustable: yes, Year :2006
used
Manufacturer: Homag PU Verleimung , Type: KL 79/2/A20/S2, Control: Homatic NC 21, Work piece width min-max mm: 60, Min-max feed m/min: 10-25, Axis control: Einlauflineal, Einlauflineal gesteuert: yes, Premilling: yes, Fine milling: yes, Application of separation agent: yes, IR zone: yes, Coil magazine: yes, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Pre-milling: yes, Corner tracing type: FK 13, 2 motors: yes, Vertical grooves: 2, Grooves, slewable-controlled: yes, Radius scraper: yes, Scraper with axis adjustment: yes, Flat scraper: yes, Spraying system 2: yes, Ersatzverleimteil : PU, Bonding part EVA: yes, Edge sanding: KS 10, Profile sanding top bottom: yes, Buffing unit: yes, Top pressure belt/roller: Band, Work piece refeeding: Bartgstedt ZHR, Compressed air bar: 6,
used
Manufacturer: Weeke, Type: Optimat BHX 500, Year: 2008, Control: PC 85, Software: Woodwop, Barcode: yes, Operating system: Windows, Machining stations: 2, Work piece width min-max mm: 70 - 1.000 (1.250), Work piece length min-max mm: 200 2.500, Work piece thickness min-max mm: 8 - 80, 3 axis control: yes, Working range X: 2.500, Working range Y-axis: 1.000, Vertical drilling station from below: 1 = 36 Spindeln, Vertical drilling station from above: 1 = 36 Spinden, Automatic setting up: yes, Transmission station: yes, Spindles controlled from below: x=8/Y=2, Spindles retrievable horizontal: 1, Tool changer: no, Power kW 1: 6, Machining stations: 2, FREE TEXT: einschl. Beschickung und Igeltransport, Year :2008
used
Manufacturer: Homag , Type: KAL 310/7/A3/S2, Year: 2004, Control: NC21, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 55/100, Min.-max. workpiece height in mm: 12 - 60, Edgeband height max mm: 60, Min-max feed m/min: 10-30, Axis control: Verleimteil/Druckzone/Formfräsen, Servo Einschubtisch: yes, mit Vakuum: 2x 3Kw, Profile milling: yes, Machining cracks: yes, Power per lamp: 2 Rollen, Coil magazine: HL 84, Strip magazin: 2 X0,55 kW, Min.-max. batten magazine mm: 2 X 0,4 kW, Mitre stations: yes, Bevel milling: FK 11/Verstellung automatisch, radius milling: 0,55 kW, Vertical grooves: PN 20, Radius scraper: yes, Rolling chain: yes, Spraying system 2: yes, Ersatzverleimteil : 5, Edge sanding: Riemen, Edge sanding radius: yes, Free places: yes, Year :2004
used
Manufacturer: Homag, Type: FKR 78/C/A/S3, Monting of the machine: zerspanerteil zum Einkürzen, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 60, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 10-40, Min-max feed m/min: ca.18, Infeed table: yes, Premilling: yes, Fine milling: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Radius scraper: yes, Flat scraper: yes, Bonding part EVA: yes, Work piece refeeding: Bargstedt, Roller/belt: Riemen, Compressed air bar: 6, Return type: Bargstedt TFU,
used
Manufacturer: Venyeskop, Type: DTK, Year: 1989, Work piece width min-max mm: 300, Min.-max. workpiece length in mm: 300-4500, Min.-max. workpiece height in mm: 10-60, Working widht max mm: 300, Conveyor lenght mm: 16000, Through running hight mm: 80, Feedin speed m/min: regelbar, Belt conveyor: yes, FREE TEXT: inkl. Transport Einlaufband 4000 mm, Year :1989
used
Manufacturer: Homag, Type: FL 20/07/15/S, Year: 2003, Destacking plant: PC 21, Vereinzelung: Woodline, Software: yes, Maschinensteuerung: 220 - 1500, Machine no 1: 220, Motore Maschine 1: 8 - 90, Machine 2: yes, Motore Maschine 2: 500, Kantenversiegelung: 10- 40, Conveyor: yes, Trittschal: max 110, Einlegstattion in Kartons: 25 mm, Min.-max. workpiece height in mm: 11, Working width min-max mm: yes, Working hight min-max mm: 6,6, Machine with controlled dogs: yes, Cam distance mm: 6,6, Feeding speed min-max m/min: yes, Feed stepless: 11, Min-max protrusion of workpiece mm: yes, 3 Engine power kW: Mittelschnitflasch Arbeitsbreite 300 - 500 mm, Year :2003
used
Manufacturer: Boge Kompressor einheit mit Trockner und Behälter, Type: S 20-2, Year: ca.2014, Control: Boge, Screw compressors: yes, Operating hours: 8850, Running idle houres: 2500, Volume flow m³/min: 2,24, Final sealing pressure bar 1: 10, Power input kW: 15, Compressed air boiler litres: 1000, Required space L x W x H mm: 15, FREE TEXT: inkl.Drucklufttrockner und 1000 Liter Kessel und Ölwasserabscheider und Feinstfilter, Year :ca.2014
used
Manufacturer: Hebrock, Type: AKV 88 F, Year: 1997, Control: hand, Glue application: no, Edgeband thickness max mm: 3,0, Edgeband height max mm: 50, Edgeband thickness max mm: 3,0, Glue system granulate/cartridge: Wärmedusche, Feeding speed min-max m/min: 0-7, Mitre stations: yes, FREE TEXT: Elektronische Eintellung der Kantenlänge, Year :1997
used
Manufacturer: Priess und Horstmann, Type: BAT III-CNC-2, Year: 1996, Control: Priess und Horstmann, Program: yes, Function: Frontenbohrmaschine, Work piece width min-max mm: 100-600, Min.-max. workpiece length in mm: 100-1000, Min.-max. workpiece height in mm: 16-25, Destacking unit: 2, Einlaufrollengang: 2, Dowel driving station: 80, Milling spindles horizontal: Blum, Milling spindles vertical: yes, Fitting type: 21000, Schliesszylinder Bohrstationen: 2600, Schlosskastenfrässtationen: 60, Bänderbohrstationen: 2, Bänder Eindrehstation: 15, Hinges inserting unit: no, Dowel driving station: 3, Working range X: 2, Dowel driving station: 3, Working range Z: 1, Dowel driving station: 3, Drilling support horizontal: yes, Drill gearings: yes, Number of tables: yes, Year :1996
used
Manufacturer: Wolf Zuluftanlage mit Wärmerückgewinnung, Year: 2014, Control: SeparaterSchaltschrank, Zuluftleistung m³/h: 25000, Heizmedium : Warmwasser, Temperatur vor-rücklauf: PWW 90-70, Jalousieklappen: yes, Stellmotore: yes, Taschenfilter Typ: EU 3, Umrichtergesteuert: yes, Pumps: yes, Einspeisung Wärmerückgewinnung: yes, Kann erfolgen über Produktionsmaschinen: yes, Year :2014
used
Manufacturer: Cefla, Type: UVM Superfokus, Year: 2014, Work piece width min-max mm: 10-1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 3-60, Working widht max mm: 1400, Number of lamps: 1, kW power 1 lamp: ca.16, Lampenlänge mm: 1450, Gesamtlänge UV Modul mm: 3000, Lamps straight installation: yes, Adjustable: yes, Elektronische Leistungregelung: yes, Automatische Werkstückerkennung : yes, Automatischer Hochlauf der Lampe bei Einlauf Werkstück: yes, Position of lamps: gerade, Conveyor: Rolle, Drive power kW: 0,75, Through running hight mm: 90, Feedin speed m/min: 3-5, Year :2014
used
Manufacturer: Giardina, Type: GST 1400, Year: 2005, Work piece width min-max mm: 50-1350, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-60, Working widht max mm: 1300, Number of lamps: 1, kW power 1 lamp: 12, Lampen gerade eingebaut: yes, Adjustable: no, Power per lamp watt UV: 80, od distance mm: 100, Conveyor lenght mm: 2000, Outer belt width mm: 2450, Feeding speed m/min: 8-20, Conveyor: Stange, Drive power kW: 1,2, Year :2005
used
Manufacturer: Giardina 3 D UV-Trockner, Type: GST 1400/3 Albatros, Year: 2005, Work piece width min-max mm: 100-1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-60, Number of lamps: 3, kW power 1 lamp: 12, Lampen gerade eingebaut: yes, Adjustable: yes, Position of lamps: gerade, Power per lamp watt UV: 80, od distance mm: 120, Conveyor lenght mm: 3500, Feeding speed m/min: 2-7, Drive power kW: 1,5, Electrical power consumption kW: 44,1, Year :2005
used
Manufacturer: IST , Type: UV Trockner, Year: ca 2000, Min.-max. workpiece length in mm: 350, Min.-max. workpiece height in mm: 80, Working widht max mm: 1300, Number of lamps: 2, Lampen Schräg eingebaut: 2, Adjustable: halblast, Power per lamp watt UV: 80 W/cm, Conveyor lenght mm: ca 3000, Feeding speed m/min: 2 - 7, Working height in mm: verstellbar, Year :ca 2000
used
Manufacturer: Technigraf , Type: Aktiprint S, Year: 2002, Work piece width min-max mm: 1300, Number of lamps: 2, Lampen gerade eingebaut: 2, Power per lamp watt UV: 2 x 120, Working hight approx mm: 5 - 35, Conveyor: PTFE Band, Through running hight mm: 20, Year :2002
used
Manufacturer: Homag, Type: KL 10/21/QA, Year: 1999, Program: Homatic, Control: PC 21, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 50, Min.-max. workpiece length in mm: 150-3500, Min.-max. workpiece height in mm: 10-60, Edgeband height max mm: 65, Min-max feed m/min: 10-30, Axis control: yes, Infeed table: no, Einlauflineal gesteuert: yes, Premilling: yes, Application of separation agent: yes, IR zone: yes, Strip magazin: no, Mitre stations: yes, Pre-milling: yes, Radius milling axis adjustment: yes, Corner tracing type: FK 13, 2 Motoren: 2, Magazin : 2 X 12, with tool holders: HSK, Grooves, slewable-controlled: Freiplatz, Radius scraper: yes, Scraper with axis adjustment: yes, Flat scraper: yes, Corner trace buffing: no, Corner trace buffing: no, Bonding part EVA: 2 Stück, Number of tools per tool-magazine: 2 X 8, Buffing unit: yes, Roller/belt: Riemen, Freiplätze: ...
used
Manufacturer: Hackemack, Type: KTR 2061, Year: 1997, Work piece width min-max mm: 1350, Min.-max. workpiece length in mm: 150, Number of lamps: 1, kW power 1 lamp: 10, kW power all lamps: 11,75, Lampen gerade eingebaut: 1, Power per lamp watt UV: 80, Conveyor lenght mm: ca 2000, Feeding speed m/min: 5 - 25, Drive power kW: ca. 1,5, Working height in mm: 980, Year :1997
used
Manufacturer: Purete, Type: PRT-U3113M, Year: 2017, Work piece width min-max mm: 1300, Min.-max. workpiece height in mm: 8-40, Working widht max mm: 1300, Number of lamps: 3, kW power 1 lamp: 11,2, kW power all lamps: 33,6, Lampenlänge mm: 1400, Reflektor von oben abnehmbar: yes, Gesamtlänge UV Modul mm: ca.3000, Automatischer Hochlauf der Lampe bei Einlauf Werkstück: halblast, Position of lamps: von oben, Power per lamp watt UV: 80, Tragstangendurchmesser mm: ca.30, Chain pitch mm: ca.80, Outer belt width mm: 2200, Drive power kW: ca.0,75, Exhaust air diameter mm: 3 X150, Through running hight mm: 60, Rod transportation: yes, Year :2017
used
Manufacturer: IMA, Type: Kantenpoliergerät, FREETEXT1: Kantenpoliergerät, FREETEXT2: Oszielierend, FREETEXT3: Kw Leistung 0,37, FREETEXT4: Drehzahl 2800, FREETEXT5: Durchmesser Bürste ca. 200 mm, FREETEXT6: Höhenverstellbar, FREETEXT7: Einsteuerung möglich, FREETEXT8: schwenkbar/Höhenverstellbar,
used
Manufacturer: Europress, Type: 1000 VE, Power kg/h: 35 m³/h, Supply case m³: 0,53, Hydraulikal power kW: 5,5, Ballenpresse: yes, Pressdruck kN/ to: 300, Einfüllöffnung b x h x L mm: 700 673, Ballenmass b mm x l mm x h mm : 500 x 650, Ballengewicht kg: 50 - 200, Year :2001
used
Manufacturer: Purete, Type: PRT-R2113AM Doppellackwalze, Year: 2017, Control: Shillin, Work piece width min-max mm: 10-1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 6-80, Durchlassbreite min-max mm: 1300, Operating side: rechts, Lackauftragseinheiten: 2, Vorschub Transport m/min min - max: 5-20, kW - Leistung Transport: 0,5, Conveyor: Band, Einbaulänge UV mm: 2000, Compressed air bar: 6, FREE TEXT: Bilder sind keine Orginal-Fotos Maschine ist nicht benutzt worden, Year :2017